E Tender No 50/EDD(Bazpur)/2023-24

Supply Item

Supply of Dead End Clamps With I Hook. (As Per Specification & Drawing of UPCL)

Supply of Stay Clamp for PCC Pole with nut and bolts and washer. (As Per Specification & Drawing of UPCL)

Supply of Suspension Clamps With I Hook. (As Per Specification & Drawing of UPCL)

Supply of M.S Clamp for Suspension Clamp with nut and bolts and washer.(As Per Specification & Drawing of UPCL)

Supply of Stay Insulator made of best Quality Pore Line and Without Defeets ISI Standerd.(as per Specification & Drawing of UPCL)

Supply of L.T. Bare Neutral Connectors PG Clamp 95 sq mm to 25 sq mm. (As Per Specification & Drawing of UPCL)

Supply of Shear Head type Insulated Piercing Connector body moulded from high quality mechanical Climate and UV resistant glass reinforced polyamide hot dipped galvanized bolts & contact teeth ABC size 120 Sq mm to 120 sq mm. MAKE- (TYCO/RPG/3M/SICAME/ENSTO)

Supply of M.S Clamp for Dead End Clamp with nut and bolts and washer. (As Per Specification & Drawing of UPCL)

Supply of L.T. Bare Neutral Connectors PG Clamp L-L 95 sq mm to 95 sq mm. (As Per Specification & Drawing of UPCL)

Supply of SMC Three Phase L.T. Distribution Box for connection of LT consumer With in built Panel Lock with key, Al bus bar RYB 25x6 mm & Al bus bar N 40x6 mm. MAKE- (SINTEX/Other IS Complied Reputed Company)

Supply of Aluminium Crimping Lug Size 120 sq mm made of best Quality Pore Line and Without Defeets ISI Standerd. (As Per Specification & Drawing of UPCL)

Supply of Aluminum Lugs 'O' type size 25 mm for PVC cable 4x25 sq mm.(As Per Specification & Drawing of UPCL)

Supply of M.S. Half Clamp for LT Distribution box with nut and bolts and washer. (As Per Specification & Drawing of UPCL)

Pole & LT AB Cable Work

Cartage of Following Material by private truck from store centre Rudrapur /Haldwani/ Kashipur to dump store approx. distance 21 to 50 Km. including loading into truck and unloading at road work site.

PCC Pole

Small Line Material including Conductor

Head Load Cartage of Following Material approx. distance 0 to 1 Km. including loading unloading.

PCC Pole

Small Line Material including Conductor

Fixing of M.S. earthing rod 20×2500 mm for earthing of support as per RESPO drawing No. RES-12 including digging earth rod 0.3 m deep below ground level connected to support with earth wire 16 swg fixing of all accessories in all respect as per Specification of UPCL.

Excavation of earth for Stay set pit of size 0.6x0.6x1.2 Mtr Length in all type of soil including proper dressing of sides and ramming of bottom including getting out soil and disposal of surplus excavation soil as directed complete work in all respect.

Fixing and tightening of LT stay set with pole and stay rod on required tension as per specification of UPCL.

Grouting of stay set complete as per RESPO drawing no. RES-16 with stay rod 16×1800 mm stay wire 7/10 SWG including excavation of earth and grouting of stay in pit with CC 1:4:8 in bottom of pit in size 0.60×0.60×0.60 mtrs, including cost of cement, sand and stone ballast etc. fixing of all accessories complete in all respect as per Specification of UPCL.

Excavation of Earth for Pole structure of Pole Pit of Size (0.9x0.6x1/6) of pole length in all type of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and diposal of surplus soil as directed complete work.

Erection of PCC Pole after digging of pit size 0.6×0.6 mtrs & 1/6 length of support on 300×300×75 mm stone pad including fixing with all accessories complete in all respect as per Specification of UPCL.

Grouting of pole in size (.45x.45x1/9) length of support in CC ratio 1:4:8 (1Cement:4Graded Stone:20mm nomial size:8 coarse sand) Block Including cost of material in all respect.

Dismantling of Old ACSR Conductor 3 Phase 4 Wire

Laying,Stringing and sagging of LT A.B Cable size (3x120+1x95) complete in all respect as per Specification of UPCL.

Dismantling of LT AB Cable.

Installation of Distribution Box.

MANRAJ ELECTRICAL & INFRASTRUCTURE