Annual Rate Contract For Repairing And Maintenance Work In Various Municipal Building In Central Zone.(North)

SOR-2024-25 (Without GST&With

ITEM Qty. Rate Per Amount

Part -A Civil Work.

1 67 Demolition and disposal of unserviceable materials with all lead and lift (ii)

Unreinforced cement concrete.

2 1 Demolition including stacking of serviceable materials and disposal of unserviceable

materials with all lead & lift.

(i) RCC work 10.00 1110.75 C.M.

SMC SOR-DEMOLITION IT NO

3 2 Demolition of brick work and stone masonary including stacking of serviceable

materials and disposal of unserviceable materials with all lead & lift.

(II) On Cement mortar. 20.00 577.92 C.M.

SMC SOR-DEMOLITION IT NO

4 3 Removing the scraping of old deteriosted plaster of any thickness from

wall/R.C.C. member including strcking of serviceable material and disposal of 500.00 20.55 S.M.

unserviceable from site of work with all lead and lift.

SMC SOR-DEMOLITION IT NO

Dismentalling tiled or stone floors laid in mortar including stacking of serviceable

materials and disposal of unserviceable materials with all lead & lift.

SMC SOR-DEMOLITION IT NO

Dismantling doors windows ventilators etc. (wood or steel) shutters including

chowkhats, Architraves, holdfasts and other attachment etc. comp. and stacking them 50.00 197.09 No.

within all lead & lift. (I) not exceeding 3 sq.m. in area.

7 70A Dismantling sanitary fittings like wash basin, w.c. pan Indian and Europeans type,

flushing tank etc. including stacking the materials with all lead & lift.

8 70 Dismentling C.I. pipes G.S.W. pipes and A.C. rain water pipes with fittings and clamps including

100.00 stacking

78.51the materials

R.M with7851.00

all lead and lift. (for any dia,

9 Self. Dismentalling of sheet roofing including ridges,valleys, gutter etc. stacking of

Expl. serviceable materials and disposal of unserviceable materials with all lead and lift (i) 50.00 50.11 S.M.

G.I.Sheet Roffing.

10 24 Dismentalling barbed wire in fencing including making rolls and also including

dismentaling posts including all earth work concrete in base and making good the

disturbed ground staking useful materials as directed and disposeing of the

unserviceable materials with all lead and lift.

SMC SOR-DEMOLITION IT NO

11 Self. Dismentalling G.I. chain link fencing including making rolls and also including

Expl. dismentaling posts including all earth work concrete in base and making good the

disturbed ground staking useful materials as directed and disposeing of the

unserviceable materials with all lead and lift.

12 Self. Dismentalling of Bombay type Railing including dismentaling posts making good

Expl. the disturbed ground staking useful materials as directed and disposeing of the 0.00 15.00 R.M

unserviceable materials with all lead and lift.

Expl. Refixing of old Bombay type Railing including cutting, welding etc comp... 0.00 25.00 R.M

14 94 Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) & disposal of the

surplus excavated soil as directed within a lead of 50 M. For following diameter of

SMC SOR , ITEM NO. 94, PG. NO.

15 1 Excavation for foundation includ.sorting out & stacking of useful materials &

disposing of the excavated stuff upto 50 mt. Lead & all lift,watering etc. Comp. (A)

Loose or Soft soil With Machinaries

(1) Up to 1.5 Mt. depth 0.00 123.13 C.M.

SMC SOR-PAGE NO 1 IT NO

16 2 Excavation for foundation includ.sorting out & stacking of useful materials &

disposing of the excavated stuff upto 50 mt. Lead & all lift,watering etc. Comp. (A)

Loose or Soft soil-With Manual Labour

(1) Up to 1.5 Mt. depth 0.00 212.52 C.M.

SMC SOR-PAGE NO 1 IT NO

ITEM Qty. Rate Per Amount

Providing & Laying C.C 1:5:10 (1cement :5coarse sand :10 graded stone agg.

m.m Nominal size) & curing comp. incl. cost of from work in :Foundation & Plinth

SMC SOR-PAGE NO 1 IT NO

18 4 Providing & laying cement concrete 1:4:8 (1 cement:4 sand:8 graded stone agg.

mm nominal size) & curing comp. incl.cost of form work in (A) Foundation and 2.00 2769.69 C.M.

SMC SOR-PAGE NO 1 IT NO

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone agg 20m.m

Nominal size) & curing comp. incl. cost of form work in :(A) foundation & Plinth

SMC SOR-PAGE NO 1 IT NO

20 6 Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3 graded stone agg.

20 mm nominal size)& curing comp. Includ.cost of form work but exclu. Cost of

reinforcement for reinforced concrete work in : (A) Foundation, footing, Base of

columns and Mass concrete.

SMC SOR-PAGE NO 1 IT NO

Providing & laying ordinary cement con.1:1.5:3 (1cement:1.5sand: 3 graded stone

agg. 20 mm nominal size) finishing smooth curing etc. comp. Incld. Cost of form

work but excl. Cost of reinforcement for R.C.C. Work in : Up to G.L./P.L.

(1)Having c/s area up to 0.085 sq.mt 0.00 12844.32 C.M.

(2) Having c/s area more than 0.085 sq. mt. & upto 0.12 sq.mt 0.00 12844.32 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 9201.68 C.M.

(1)Having c/s area up to 0.08 sq.mt 0.00 9102.61 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 0.00 8174.41 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 7086.88 C.M.

SMC SOR-PAGE NO 1 IT NO

22 8 Providing & fixing TMT/ CRS Bar reinforcement for R.C.C. work incl. bending,

binding & placing in position etc. comp. Upto G.L./P.L.

SMC SOR-PAGE NO 1 IT NO

23 16 Providing & construction brick work using Fly Ash bricks having crushing strength

not less than 70 Kg./sq.cm. in foundation & plinth in C.M. 1:6 (1 cement:6 sand ) 50.00 4729.83 C.M.

etc. comp. Up to G.L./P.L.

(SOR SMC Pg No. 2 It No. 16)

24 10 Filling in trenches with available excavated earth in layer not exceeding 20cm in

depth consolidating each deposited layer by ramming & watering

(SOR SMC Pg No. 1 It No. 10)

25 11 Filling in foundation and plinth with murrum or selected soil in layers of 20cm. 50.00 301.78 C.M.

thickness including watering, ramming and consolidating etc. complete.

26 12 Providing & applying 20mm.th. Sand faced cement plaster on walls or similar

surfaces at all floor levels consisting of 12 mm. Av. th'. backing coat of C.M. 1:3(

cement :3 sand) & 8 mm.th. Finishing coat of C.M.1:1 (1 cement: 1 sand)--- Upto

(SOR SMC Pg No. 1 It No. 12)

27 13 Providing & laying ordinary cement con.1:1.5:3 (1cement:1.5sand:3 graded graded

stone agg. 20 mm nominal size) finishing smooth curing etc. comp. Incl.. Cost of

form work but excl. Cost of reinforcement for R.C.C. Work in :

(1) Having c/s area up to 0.085 sq.mt

Ground Floor 0.00 12844.32 C.M.

First Floor 0.00 12885.28 C.M.

Second Floor 0.00 12926.24 C.M.

Terrace (third) Floor 0.00 12967.19 C.M.

(2) Having c/s area more than 0.085 sq. mt. & upto 0.12 sq.mt

Ground Floor 0.00 11166.97 C.M.

First Floor 0.00 11207.92 C.M.

Second Floor 0.00 11248.88 C.M.

Terrace (third) Floor 0.00 11289.83 C.M.

(3) Having cross sectional area more than 0.12 sq. mt.

Ground Floor 0.00 9201.68 C.M.

First Floor 0.00 9242.63 C.M.

Second Floor 0.00 9283.59 C.M.

Terrace (third) Floor 0.00 9324.54 C.M.

(1) Having c/s area up to 0.085 sq.mt

Ground Floor 0.00 9102.61 C.M.

First Floor 0.00 9143.56 C.M.

Second Floor 0.00 9184.52 C.M.

Terrace (third) Floor 0.00 9225.47 C.M.

ITEM Qty. Rate Per Amount

(2) Having c/s area more than 0.085 sq. mt. & upto 0.12 sq.mt

Ground Floor 0.00 8174.41 C.M.

First Floor 0.00 8215.36 C.M.

Second Floor 0.00 8256.32 C.M.

Terrace (third) Floor 0.00 8297.27 C.M.

(3) Having cross sectional area more than 0.12 sq. mt.

Ground Floor 0.00 7086.88 C.M.

First Floor 0.00 7127.84 C.M.

Second Floor 0.00 7168.79 C.M.

Terrace (third) Floor 0.00 7209.75 C.M.

(1) Slabs having more than 8cm. and upto 10 cm. Th'.

Ground Floor 0.00 7984.42 C.M.

First Floor 0.00 8025.37 C.M.

Second Floor 0.00 8066.33 C.M.

Terrace (third) Floor 0.00 8107.28 C.M.

(2) Slabs having more than 10 cm. & upto 13 cm. Th'.

Ground Floor 0.00 7396.96 C.M.

First Floor 0.00 7437.92 C.M.

Second Floor 0.00 7478.87 C.M.

Terrace (third) Floor 0.00 7519.83 C.M.

(3) Slabs having more than 13 cm. Thickness

Ground Floor 0.00 6813.01 C.M.

First Floor 0.00 6853.96 C.M.

Second Floor 0.00 6894.92 C.M.

Terrace (third) Floor 0.00 6935.87 C.M.

Ground Floor 0.00 9982.37 C.M.

First Floor 0.00 10023.32 C.M.

Second Floor 0.00 10064.28 C.M.

Terrace (third) Floor 0.00 10105.23 C.M.

Ground Floor 0.00 5576.81 C.M.

First Floor 0.00 5617.76 C.M.

Second Floor 0.00 5658.72 C.M.

Terrace (third) Floor 0.00 5699.67 C.M.

(SOR SMC Pg No. 1 It No. 13)

28 14 Providing & laying ordinary cement con.1:1.5:3(1cement:1.5sand:3 graded graded

stone agg. 20 mm nominal size) finishing smooth curing etc. comp. Incl.. Cost of

form work but excl. Cost of reinforcement for R.C.C. Work in : .

(A) Stair cases including landings etc

Ground Floor 0.00 7698.11 C.M.

First Floor 0.00 7739.06 C.M.

Second Floor 0.00 7780.02 C.M.

Terrace (third) Floor 0.00 7820.97 C.M.

(B) Vertical and horizontal fins

Ground Floor 0.00 11613.07 C.M.

First Floor 0.00 11654.03 C.M.

Second Floor 0.00 11694.99 C.M.

Terrace (third) Floor 0.00 11735.94 C.M.

(SOR SMC Pg No. 2 It No. 14)

29 15 Providing & fixing TMT / CRS Bar FE 500d reinforcement for R.C.C. work incl.

bending, binding & placing in position etc.comp.

Ground Floor 0.00 77.29 Kg.

First Floor 0.00 78.34 Kg.

Second Floor 0.00 79.39 Kg.

Terrace (third) Floor 0.00 80.44 Kg.

(SOR SMC Pg No. 2 It No. 15)

30 16 Brick work using common burnt clay building bricks having crushing strength

not less than 35 kg./Sq.Cm. in Cement Mortar 1:6 (1- Cement : 6 -fine

sand) (C) Fly Ash Bricks

Ground Floor 0.00 4729.83 C.M.

First Floor 0.00 5018.55 C.M.

Second Floor 0.00 5307.27 C.M.

Terrace (third) Floor 0.00 5595.99 C.M.

(SOR SMC Pg No. 2 It No. 16)

ITEM Qty. Rate Per Amount

31 17 Half brick masonry in common brunt clay building bricks having crushing strength

not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -

coarse sand ) in foundation and plinth (C)Fly Ash Bricks

Ground Floor 15.00 712.81 S.M.

First Floor 15.00 719.37 S.M.

Second Floor 0.00 725.94 S.M.

Terrace (third) Floor 0.00 732.50 S.M.

(SOR SMC Pg No. 2 It No. 17)

32 18 Uncoursed rubble masonary with hard stone of approved quality in foundations

and plinth in cement mortar 1:6 (1 Cement : 6 sand) including leveling up etc. 0.00 2586.61 C.M. -0.39

(SOR SMC Pg No. 2 It No. 18)

33 19 Pointing on Coursed stone masonary with cement mortar 1:3 (1 cement : 3 Sand) --

(A) Flush Pointing 0.00 101.89 S.M.

(B) Ruled Pointing 0.00 105.24 S.M.

(SOR SMC Pg No. 2 It No. 19)

34 20 Pointing on Uncoursed stone masonary with cement mortar 1:3 (1 cement :

(A) Flush Pointing 0.00 110.24 S.M.

(B) Ruled Pointing 0.00 114.25 S.M.

(SOR SMC Pg No. 3 It No. 20)

35 21 Providing Rubble Pitching with hard stone of approved quality in cement mortar

1:6 (1 Cement : 6 Coarse sand) including leveling up ,Curing etc. complete excluding 0.00 2550.00 C.M.

(SOR SMC Pg No. 3 It No. 21)

36 22 Providing and filling rubbles including hand packing and filling interstices with

quarry spalls behind abutments and between returns as directed.

(SOR SMC Pg No. 3 It No. 22)

37 23 Providing upto floor two level precast cementconcrete jali or grill 1:2:4 mix (1-

Cement : 2- coarse sand : 4-graded stone aggregate 6mm nominal size)

reinforced with 1.6 mm dia. Mild steel wire including roughening,cleaning,

fixing and finishing in cement mortar 1:3 and curing complete. (B) 40mm thick.

Ground Floor 12.00 741.93 S.M.

First Floor 5.00 752.39 S.M.

Second Floor 0.00 762.85 S.M.

Terrace (third) Floor 0.00 773.32 S.M.

(SOR SMC Pg No. 3 It No. 23)

38 24 Providing & Applying 10mm.th.cement plaster in single coat on brick/ concrete

walls similar surfaces for plastering & finished even & smooth with a floating coat of

cement slurry mixed with admixture of lime or neeru in required proportion etc.

comp. in C.M 1:3 (1 cement : 3sand)

(A) For wall and similar surfaces

Ground Floor 250.00 199.28 S.M.

First Floor 100.00 228.84 S.M.

Second Floor 100.00 258.39 S.M.

Terrace (third) Floor 100.00 287.94 S.M.

(B) For ceilings & soffits of stairs

Ground Floor 250.00 225.34 S.M.

First Floor 100.00 254.89 S.M.

Second Floor 100.00 284.45 S.M.

Terrace (third) Floor 100.00 314.00 S.M.

(SOR SMC Pg No. 3 It No. 24)

39 26 Providing & Applying 20mm thick sand faced cement plaster on walls for height

more than 10 metres above ground level consisting of 12mm thick backing coat of

C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1- 250.00 347.42 S.M.

sand) etc. complete. Ground Floor, First Floor, Second Floor and Third(Terrace)

(SOR SMC Pg No. 3 It No. 26)

Providing & Applying 20mm. Th. Heavy Roller plaster on walls or similar

surfaces at all floor levels consisting of 12 mm av. Th. Backing coat of C.M.

1:3 (1 cement:3 sand) & 8 mm. th. Finishing coat of C.M. 1:1 (1 cement:

sand) apply thick cement slurry and apply roller horizontal as well as vartical (

two times ) up to good quality and size of grain in elevation as per directed by

engineer incharge.

(SOR SMC Pg No. 3 It No. 28)

41 29 Providing throating or plaster drip and moulding it to R.C.C. chajja etc.

comp.. For all floor

(SOR SMC Pg No. 3 It No. 29)

42 30 Providing 20 mm deep finished groove in plaster in line and level etc. Comp. For

all Floor (M.R.)

(SOR SMC Pg No. 3 It No. 30)

ITEM Qty. Rate Per Amount

Providing and laying polished Kota stone slab flooring over 20mm (Average)

thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or

L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey 150.00 1019.39 S.M.

cement slurry mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25mm thick

(SOR SMC Pg No. 3 It No. 32)

44 33 Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-

Cement : 3 coarse sand) and jointed with gray cement slury mixed with

pigment to match the shade of slab including rubbing and polishing etc.

(SOR SMC Pg No. 4 It No. 33)

45 34 Providing & Laying white glazed tiles 6mm. th. of Orient, Kajaria,

Jhonson,Nitco,Somani ,Bell make at all floor levels, in flooring, treads of

steps & landings laid on a bed of 12 mm. Av. Th.C.M.1:3(1cement :3 sand) 250.00 900.29 S.M.

finished with flush pointing in white cement etc.com. For all floors

(SOR SMC Pg No. 4 It No. 34)

46 35 Providing & Laying white glazed tiles 6mm. th. Of Orient, Kajaria,

Jhonson,Nitco,Somani,Bell make at all floor levels in skirting risers of steps &

dado on 10 mm. th. C.M.1:3(1cement :3 sand) including necessary cement 150.00 932.02 S.M.

paste for fixing and joined with white cement slurry etc. complete. For all floors

(SOR SMC Pg No. 4 It No. 35)

47 36 Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and

landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse 75.00 960.42 S.M.

sand ) finishing with flush pointing in white cement.

(SOR SMC Pg No. 4 It No. 36)

48 37 Providing and laying Ceramic tiles 6mm thick in skrting risers of steps and

dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and 50.00 1037.25 S.M.

jointed with white cement slurry

(SOR SMC Pg No. 4 It No. 37)

Providing & laying marble stone slab flooring over 20 mm.av. base of

C.M.1:6 ( 1 cement :6 coarse sand ) & jointed with grey cement slurry incl. 0.00 2246.54 S.M.

rubbing & polishing comp.(A) Marble slab 25 mm. Thick.

(SOR SMC Pg No. 4 It No. 38)

50 39 Providing & laying granite slab 18mm thick in flooring, treads of steps

and landing laid on bed of 20mm thick cement mortar 1:6 (1 Cement :

coarse sand) or lime mortar 1:1.5 laid and finished with flush pointing in white

or colour cement including rubbing and polishing complete. (Basic Rate:-

(SOR SMC Pg No. 4 It No. 39)

Providing & laying granite slab 18mm thick in skirting, risers of steps,

dedo and pillars laid on 10mm thick cement mortar 1:4 (1 Cement :

Coarse sand) and finished with flush pointing in white or colour cement

including rubbing & polishing comp.. (Basic Rate:- Rs.1347.46/S.M.)

(SOR SMC Pg No. 4 It No. 40)

52 41 Providing & laying granite slab 18mm thick in Window-Door seal Frame

Etc laid on 10mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) with

nessary adhesive material and finished with flush pointing in white or colour 25.00 2026.00 S.M.

cement, including rubbing & polishing comp.. (Basic Rate:- Rs.1000.0/S.M.)

(SOR SMC Pg No. 4 It No. 41)

53 42 Labour Charges For Half Round Edge For Granite 50.00 150.00 R.M.

54 42 Labour Charges For Quater Round Edge For Granite 50.00 90.00 R.M.

55 42 Labour Charges For Edge Finished For Granite 50.00 43.43 R.M.

(SOR SMC Pg No. 4 It No. 42)

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in flooring

treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 50.00 1092.37 S.M.

cement : 3 coarse sand) finishing with flush pointing in white cement.

(SOR SMC Pg No. 4 It No. 44)

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in skrting

risers of steps and dedo on 10mm thick cement plaster 1:3 (1 cement :

coarse sand) and jointed with white cement slurry.

(SOR SMC Pg No. 4 It No. 45) 50.00 1135.80 S.M.

58 Self. Providing and laying Marbo Granite tiles 8 to 10 mm thick, 24" x 24" in flooring

Expl. treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement

: 3 coarse sand) finishing with flush pointing in white cement. (Basic Rate-

ITEM Qty. Rate Per Amount

Providing and laying chequered precast concrete tiles 22mm thick with

aggregate of sizes upto 6mm in floors treads of steps and landing on 20mm

thick bed of C.M. 1:6 (1 cement : 6 sand) or L.M. 1:1.5 (1 Lime putty : 1.5 50.00 545.76 S.M.

sand) jointed with neat cement slurry with pigments to match the shade of the

(SOR SMC Pg No. 5 It No. 48)

60 Self. Providing & Laying polished kota stone of machine cut edge patti of 10cm wide

Expl. mm. thk. in ramp flooring as per design, laid on 10 mm. th. C.M.1:3(1cement :3

sand) including necessary cement paste for fixing and joined with cement slurry etc.

complete. For all floors.

Providing & Constructing polished Kotah stone cooking platform 0.6mt. wide &

0.75mt. height, including one end side kota stone( Double Polish) of 1.25mt height &

front kota stone patti of 10cm wide ,vertical partitions of half B.M wall in C.M 1:4

and 10mm th plaster in 1:3with finishing smooth with cement slurry as required and

steel sink of 0.45mt x 0.45mt size of approved quality and make with required all

fittings & Fxitures etc. Comp as per instruction given by site in charge at all floors

(SOR SMC Pg No. 11 It No. 122)

Providing & fixing 35mm.th. Flush Door Solid Double Core type Both Face

water proof Ply Vennered & 1.5 mm th.laminate shall be pasted on both side with

adhesives as specified by the manufacturers. The laminate shall be as per approved

shade & texture, of make incl. Sal wood frames of finished size 12cm x 7cm.incl.

S.S. Hinges with nessary screws & Anodized aluminum fixtures & fastenings For all

52 Same as Above But Without Frame 10.00 2520.00 S.M.

(SOR SMC Pg No. 5 It No. 51,52)

Providing & fixing 35mm.th. Indian teak wood shutters for doors, windows &

clearstory windows incl. Indian teak wood frames of finished size 12cm x

7cm.incl. Medium quality anodized aluminum fixtures & fastenings incl. Primer coat

of approved quality & two coats of oil painting etc. For all Floor

(A) Fully Panelled 10.00 5533.68 S.M.

(B) Partly Panelled and Partely Galzed 8.00 5185.03 S.M.

(C) Fully Galzed 4.00 4836.39 S.M.

(SOR SMC Pg No. 5 It No. 53)

Providing and laying cement concrete flooring 1:2:4 (1 cement : 2course sand :

graded stone aggregate 20mm nominal size) laid in one layer finished with a floating

coat of neat cement

A) 40mm thick 10.00 319.03 S.M.

(B) 50mm thick 10.00 374.14 S.M.

(SOR SMC Pg No. 5 It No. 50)

65 Self. Providing and fixing sal wood frame 12 cm x 7 cm size including anodized fixtures

Expl. and fastening etc. including primer coat of approved quality and two coats of oil 15.00 865.00 S.M.

paint.etc complete. (For all floors)

Providing and fixing sheet glass of good quality badded in putty and fixed with

wooden beadings incldg.the cost of first class teak wood beading and necessary

cutting of glass etc. in the place of damaged/broken sheet glass of the existing

windows /ventillations etc. as shown & as ditrected by Engineer-in-charge.(For all

(a) 4 mm plain glasss 10.00 724.17 S.M.

(b) 6 mm wired figured glasss 10.00 650.44 S.M.

ITEM Qty. Rate Per Amount

Providing and Replace door, Window S.S. Fixtures fix in wooden / Alluminium door -

(A) S.S. Stopper 60 Cm long of ASIS 304 50.00 429.25 No.

(B) S.S. Stopper 30 Cm long of ASIS 304 50.00 215.13 No.

(C) S.S. Stopper 20 Cm long of ASIS 304 50.00 150.49 No.

(D) S.S. Aldrop 20 Cm long of ASIS 304 Grade 50.00 257.55 No.

(E) S.S. Aldrop 25 Cm long of ASIS 304 Grade 50.00 386.83 No.

(F) S.S. Aldrop 30 Cm long of ASIS 304 Grade 50.00 472.68 No.

(G) S.S. Handle for door/ window 10 Cm size of ASIS 304 Grade 50.00 64.64 No.

(F)S.S. Handle for Door 15 Cm size of ASIS 304 Grade 50.00 89.89 No.

(I) S.S. Pipe Handle for door 30 Cm size o ASIS 316 Grade 50.00 1030.20 No.

(J) Inter Lock [Kadaka lock] 50.00 247.45 No.

(H) Locks Godrej Mortice lock cover 50.00 388.85 No.

(I) Door closers arrow type with spring 12 length as approved sample (30 cms) 50.00 565.60 No.

(J)Handle for doors Windows Cupboards etc. Brass 15 cms. Length 50.00 70.70 No.

(K) S.S. Door / window hinges 4x1"x1" 50.00 64.64 No.

Providing and fixing window having extruded aluminium Powder Coated section

frame main outer size 95 mm x 24 mm x 1.17 mm (of jindal section no:2459 @ Wt.

of 0.738 Kg/mt), horizontal Three track member size 92 mm x 31.75 mm x

mm (of jindal section no;8688, @ Wt. 1.07 Kg/mt), vertical member of size 92 mm x

31.75 mm x 1.50 mm (of jindal section no:8933, @ Wt. 1.06 Kg/mt) with sliding

shutters of horizontal member size 40 mm x 18 mm x 1.29 mm (of jindal section

no:8947 @ wt. of 0.456 kg/mt), vertical member of size 40 mm x 18 mm x 1.29 mm

(of jindal section no:8949 @ wt. of 0.456 kg/mt) with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminium fittings & fixtures and

transparent silicon sealant glass fixing to frame as per details etc.

(A) Same as above but Colour anodized 15.00 1591.87 S.M.

(SOR SMC Aluminium works It No. 2)

Providing and fixing window having extruded aluminium Powder Coated section

frame main outer size 63.50 x 38.10 x1.95 mm (of Jindal section no.4605, @ Wt.

1.094Kg/mt) horizontal Two track member size 61.85 mm x 31.75 mm x 1.20 mm

(of jindal section no:8687, @ Wt. 0.695 Kg/mt.) vertical member of size 61.85 mm x

31.75 mm x 130 mm (of jindal section no:8758 @ wt. of 0.659 kg/mt) with sliding

shutters of horizontal member size 40 mm x18 mm x 1.29 mm ( of jindal section

no:8949, @ Wt. of .456 Kg/mt) vertical member of size 40 mm x 18 mm x 1.29 mm

(of jindal section no:8947, @ Wt. of 0.456 Kg/mt/section 8948, @ Wt. of

Kg/mt) with 5 mm thick tranparent bronze colour tineted float glass with powder

coated aluminium fittings and fixtures and transparent silicon sealant glass fixing to

frame as per details etc. complete for window.

(A) Same as above but Colour anodized 20.00 1705.67 S.M.

(SOR SMC Aluminium works It No. 3)

70 4 Providing and fixing standared extruded ofalluminium section of size 63mm x

38.10mm x1.2mm , @ Wt. 0.643 Kg/mt with colour Powder

Coated alluminium frame for ventilation with 5 20.00 1175.56 S.M.

mm thick frosted glass as details etc complete for

(A) Same as above but Colour anodized 20.00 1175.56 S.M.

(SOR SMC Aluminium works It No. 4)

71 5 Providing and fixing standared extruded of aluminium section of size 61 x

x0.90mm (of Jindal section no.14080, @ Wt. 0.471 Kg per mt) with Powder Coated

alluminium frame with 5 mm thick transparent bronze colour tinted float glass as 20.00 1833.29 S.M.

details etc. complete for fix window.

(A) Same as above but Colour anodized 20.00 1833.29 S.M.

(SOR SMC Aluminium works It No. 5)

Providing & fixing partly panel & partly glass Powder Coated Aluminium doors

with aluminium section of Hindalco, Jindal , Narmada,Banco or Equivalent approved

make having Poder Coated outer frame Leg Partition section of 63.50 mm x

mm having weight 1.158 kg. / R.M. shutter section having size 83.5 mm x 44.45mm

( top & bottom: 1.384 kg./rmt. and middle 1.139 kg./rmt.) door vertical 47.62mm x

44.45 mm (vertical:0.881 kg./rmt. & top hing side:0.974 kg./mt.), Glazing Clip

(Jindal Section No. 19370 Wt. 0.109 Kg./ Mt.) with 5mm thick sheet glass in acid

frogting and 12 mm thick prelaminated sheet of Greenlam, Panama or archid make as

approved by Engineer-in charge including fixing brass pivot, handle, lock etc.

(A) Same as above but Colour anodized 10.00 3237.00 S.M.

(SOR SMC Aluminium works It No. 6)

ITEM Qty. Rate Per Amount

Providing & fixing Powder Coated Aluminium partly glazed and partly panelled

partition using medium duty sections of Hindalco,Zindal, Narmada, Banco or

Equivalent approved make having section 63.50 mm x 38.10mm ( Frame-.758 kg/rmt

& Middle section- 0.819 Kg./rmt), Galzing Clip with 5 mm thick clear float glass of

approved make including all other necessary fittings and fixtures. Entire work will 10.00 2400.00 S.M.

have to be made water proof using necessary rubber sectioned wherever required.

Gaps all round the frame to be filled with approved water proof sealent. Bottom

portion of doors both side to be covered with 12mm thick prelaminated particle board

of approved make and quality and as per design.

(A) Same as above but Colour anodized 10.00 2400.00 S.M.

(SOR SMC Aluminium works It No. 7)

Providing and fixing FRP FRAME size 125 x 65 mm and 35 mm thick FRP

shutter with wood grain raised panneled design finish shutter having extra

reinforcement on sides & edges in Gel coat finish. The core of the shutter & frmae is

to be filed up with injected polyurethene foam done in situ along with embedded

wooden pieces for stiffening & also taking hinges & fixtures. The whole FRP frame 75.00 2019.98 S.M.

& shutter is to be water proof weather proof,termite proof &resistance to mild

acid/alkali. Rates are to be inclusive of S.S.hinges with fastener sleeve & alluminium

fixtures & fastentings. Product should have 3 years performance guarantee and

company have ISO 9001-2000 certificate.

(SOR SMC Pg No. 5 It No. 55)

75 Self. Reparing & Servicing of existing door/window including cost of hardware

Expl. (Fevicol,Nail and NF screw etc.) but excluding cost of fixtures as directed by

Engineer in-charge.

(A) Wooden door 50.00 150.00 Nos.

(B) Partly Panelled and Partely Galzed alluminium door 50.00 150.00 Nos.

(C) Wooden Window shutter 50.00 75.00 Nos.

(D) Alluminium Window shutter 50.00 75.00 Nos.

Providing & fixing Glass Table Top using 08mm th.clear glass with crystal edge &

necessary hardware materials etc. complete as per instruction by engineer in charge.

77 Self. Providing & fixing door closer Ozon / Dorma / Hyper / Hardwin / Godrej /

Expl. Alluminium body ISI brander equivalent make with necessary hardware materials 0.00 1400.00 Nos.

etc. complete as per instruction by engineer in charge.

78 Self. Providing & fixing water proof plywood (ISI marks 710 grade) at the door,window

Expl. and any space in the building. necessary hardware,screws materials etc. complete as

per instruction by engineer in charge.

(F) 12 mm BSL partical board green or Equalent make 10.00 550.00 S.M.

(G) 12 mm plan E board Evrest or Equalent make 10.00 470.00 S.M.

79 Self. Providing & fixing laminated sheet 1mm thick suede finished as per approved make

Expl. with & necessary adhesive,hardware materials etc. complete as per instruction by 0.00 650.00 S.M.

engineer in charge.

80 Self. Providing & fixing Mortise lock body with 70mm cylinder (make godrej / ozon /

Expl. inox) fix in wooden door with necessary hardware materials etc. complete as per 20.00 1500.00 S.M.

instruction by engineer in charge.

81 Self. Replacement of Revolving chair parts ISI marks with necessary hardware, screws

Expl. materials etc. complete as per instruction by engineer in charge.

(A) P.V.C. moulded Hand rest 20.00 325.00 Nos.

(B) Hydraulic gas pump 20.00 550.00 Nos.

(C) Cushion sheet, back with fabric / rexine 20.00 1850.00 Nos.

(D) Rubber castor / wheels 20.00 100.00 Nos.

82 Self. Reparing & Servicing of wooden office table / file storage using screws and

Expl. necessary hardware materials complete as per instruction by engineer in charge.

Replacement of wooden office table / file storage parts ISI marks with necessary

hardware, screws materials etc. complete as per instruction by engineer in charge.

(A) Drawer / shutter locks 50.00 250.00 Nos.

(B) ss 4" D Handles 50.00 80.00 Nos.

(C) Drawer channel 50.00 275.00 Nos.

(D) ss 3" heavy hinges 50.00 80.00 Nos.

84 Self. Providing & laying sun control or frosted milky glass film as approved

Expl. colour,design,cutting complete as per instruction by engineer in charge. 10.00 480.00 S.M.

ITEM Qty. Rate Per Amount

Expl. Providing & fixing wooden notice board with Righting laminated board finish using

12mm th.Back commercial plywood approved make, 01mm th. SF finish

laminate,teakwood framing & necessary hardware materials etc. inside and liping

french polish finish complete in all respects by engineer in charge complete.

Providing & fixing M.S.Grills of required pattern to wooden frames of windows etc.

At all floor levels with M.S. flats at required spacing & frame around square or round

bars with round headed bolts & round headed bolts and nuts or by screws incl.

Priming coat of Red lead paint etc. comp. (A) Plain grill For all Floors

(SOR SMC Pg No. 5 It No. 57)

Providing & fixing in position collapsible steel shutters with vertical channels

x10 x 2 mm. Braced with flat iron diagonals 20 x5mm size with top & bottom rails

of T-iron 40x40x6mm. with 38mm dia. steel pulleys comp. with bolts, locking 15.00 6158.35 S.M.

arrangements, stoppers, handles incl. applying a priming coat of Redlead paint etc.

(SOR SMC Pg No. 5 It No. 58)

88 8 Providing & applying painting two coats at all floor levels on new steel other

metal surface with synthetic enemal paint, brushing interior to give an even shade

incl. cleaning the surface of all dirt, dust & other foreign matter etc. Comp. (A) For

plain grill For all Floor

(SOR SMC COLOURWORKS It No. 8)

89 59 Providing and fixing M.S. Fan clamps type 1 to 16 mm dia M.S. bar bent to

shpe with hooked ends to RCC slabs curing, layig including painting the

exposed portion of loops, all as per standard design complete.

(SOR SMC Pg No. 5 It No. 59)

90 2 Providing & applying white washing with lime (two coats) at all floor levels to give

an even shade incl. thoroughly brooming the surface to remove all dirt, dust mortar

droppings & other foreign matter etc.. comp. Incl. Prov.& mixing in required

proportion, binding agent like "Fevicol dh" or equivalent approved brand etc. For

(A) For wall & similar surfaces 500.00 13.03 S.M.

(B) For ceilings and soffits 500.00 15.37 S.M.

(SOR SMC COLOURWORKS It No. 2)

91 3 Distempering two coats with oil bound washable distemper of approved brand &

manufacture & of required shade on wall surface to give an even shade over and &

incl. a priming coat of alkali resistance primer of approved brand after throughly

brushing the surface to give an even shade after throughly brushing the surface free

from mortar droppings and other foreign matter and also including preparing the

surface even and smooth.

(A) For wall & similar surfaces 350.00 75.84 S.M.

(B) For ceilings and soffits 350.00 84.37 S.M.

(SOR SMC COLOURWORKS It No. 3)

92 4 Apply two coats of putty and two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other matter and sand papered

(SOR SMC COLOURWORKS It No. 4)

Distempering two coats on previously distempering wall (without primer) with

oil bound washable distemper of approved brand & required shade on wall surface to

give an even shade after throughly brushing the surfaces clean of all grease, dirt loose

places of sceles & also including preparing the surface even and smooth.

(SOR SMC COLOURWORKS It No. 6)

94 5 Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter and sand 250.00 83.36 S.M.

papered smooth.

(SOR SMC COLOURWORKS It No. 5)

95 7 Applying Priming coat over new steel and other metal surface after over and

including preparing the surface by throughly cleaning oil, grease dirt and other

foreign matter and scoured with brushed fine steel wool, scrapers and sand paper

with ready mixed priming paint brushing red lead

(SOR SMC COLOURWORKS It No. 7)

Painting two coats of enamel paint (Excluding priming coat) over previously

painted wall with even shade & surface after removing dirt, dust foreign matter etc. 150.00 60.00 S.M.

(SOR SMC COLOURWORKS It No. 16)

Painting two coats of enamel paint over priming coat (including priming coat)

on wall after removing entire surface dirt, dust foreign matter & also incl. preparing 150.00 90.00 S.M.

the surface even & sand papered smooth etc. comp.(M.R.)

(SOR SMC COLOURWORKS It No. 15)

ITEM Qty. Rate Per Amount

Providing & applying two coats of weather shield max paint (3 coats may be

required in case of darker colours.)of ICI Dulux or Apex Ultima of Asian Paint

including applying exterior acrylic primer coat as per manufacturers specification and

directions in shade and colour approved by architects, on exterior surfaces of the

building including scaffolding, preparing the surface, watering, curing etc. complete

and as directed by the architects and manufacturers.

Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi,

algae and flaking paint. This can be achieved by brushing with a wire/ stiff coir

brush, followed by water jetting if required. Fill up all minor cracks and defects with 500.00 82.00 S.M.

white cement and sand mixture in the ratio 1:3. For application on previously painted

wall, previous coatings of paint must be thoroughly scraped off and Clean the surface

thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5 hours.

Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of weather shield max

(SOR SMC COLOURWORKS It No. 17)

99 65 Providing & fixing at all floor levels,both face polished machine cut edge

green kota stone slab (30mm) for urinal partition joined with grey cement 10.00 900.00 S.M.

slurry (1:1) incl. Rubbing & polishing etc. complete. (M.R)

(SOR SMC Pg No. 6 It No. 65)

100 Self. Providing & Fixing including making gisi & fixing at all floor levels both face

Expl. polished machine cut edge, granite stone slab for urinal partition joined with

grey cement mortar (1:3) incl. Rubbing & Polishing etc. Complete. Including half

round edge for granite.

(Basic Rate of Granite : Rs. 1200.00 / S.M.)

101 95 Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4 graded stone agg.

mm nominal size)& curing comp. Includ.cost of form work but exclu. Cost of

reinforcement for reinforced concrete work in : (A) Foundation, footing, Base of

columns and Mass concrete.

(SOR SMC Pg No. 9 It No. 95)

102 96 Providing & laying ordinary cement con.1:2:4 (1cement:2sand:4graded graded stone

agg. 20 mm nominal size) finishing smooth curing etc. comp. Incld. Cost of form

work but excl. Cost of reinforcement for R.C.C. Work in : Up to G.L./P.L.

(1)Having c/s area up to 0.08 sq.mt 0.00 12335.51 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 0.00 10658.16 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 8692.87 C.M.

(1)Having c/s area up to 0.08 sq.mt 0.00 8593.80 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 0.00 7665.60 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 6578.07 C.M.

(SOR SMC Pg No. 9 It No. 96)

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 crushed stone agg. 20 m.m

Nominal size)& curing comp. incl. cost of from work in: wall caps/ copings.

(SOR SMC Pg No. 9 It No. 97)

104 1 Box Cutting the road surface to proper slope and camber for making base includinng

removing the excavated stuff and depositing on the road side slope as directed up to 0.00 109.41 C.M.

(SOR SMC GROUND DEVELOPMENT WORKS It No. 1)

103 2 Preparation of subgrade with Compacting, Levelling and consolidation of subgrade

with miniroller /plate vibrator machine including watering and filling in depressions 0.00 9.00 S.M.

which occur during the process as directed by engineer in charge.

(SOR SMC GROUND DEVELOPMENT WORKS It No. 2)

104 3 Providing & filling with Mix soil in layers of 20 cm. Th'. Incl. watering, ramming &

consolidation etc. complete.

(SOR SMC GROUND DEVELOPMENT WORKS It No. 3)

105 Self. Providing, Supplying & Sprading of Gravel in Play area including dressing etc.

Expl. comp. 0.00 1150.00 C.M.

106 4 Supplying & filling fine sand(pana) in 75 mm / 100 mm / 150 mm compacted

thickness over the base including necessary compaction, watering etc.

complete. Item includes leveling by using vibratory plates compacted

machine and as directed by engineer in charge.

(SOR SMC GROUND DEVELOPMENT WORKS It No. 4)

107 Self. Removing & resetting existing readymade c.c. kerb stone of required size &

Expl. thickness in line .level and in truly vertical position including filling joints in C.M.

1:1 (1 part of cement : 1 part of stone dust) smooth pointing in C.M. 1:1 (1 part of 0.00 228.00 R.M.

cement : 1 part of coarse sand) including watering etc. complete and as directed by

engineer in charge. (M.R)

ITEM Qty. Rate Per Amount

Removing and Resetting of Paver block of walk-way with necessary sand / pana

filling and make in line and level with necessary vibrating using compactor machine.

109 Self. Removing and Resetting of Kota Stone paving for footpath in line , level and in

Expl. proper gradient including 25mm thick bedding in C.M. 1:6 (1 cement:6 sand ) with

sufficient ramming consolidation. Providing Joints in 1:3 (1 cement:3 sand ) and 0.00 107.00 S.M.

smooth pointing in C.M 1:1 (1 cement:1 sand ) including watering etc, complit and

as diracted by Engineer in charge.

110 49 Providing and laying rough chiseled dressed stone flooring over 20mm thick base

of cement mortar 1:5 (1 cement : 5 coarse sand) or L.M. 1:1.5 including pointing

with cement mortar 1:2 (1 cement : 2 stone dust) etc.

(SOR SMC Pg No. 5 It No. 49)

111 6 Providing 100mm thick readymade C.C. kerb of strength M-20 (size 300mm x

380mm) purchased from SMC's approved paverblock manufacturer & setting in line,

level and in truly vertical position, including filling joints in C.M. 1:1 (1 part of

cement : 1 part of stone dust) smooth pointing in C.M. 1:1 (1 part of cement : 1 part

of coarse sand) including watering etc. complete and as directed by engineer in

For rounding at the edge of footpath (For fanning portion) 0.00 274.00 R.M.

(SOR SMC GROUND DEVELOPMENT WORKS It No. 6)

Providing interlocking type Rubber moulded cement concrete paver block of

approved shape, design & colour having 60mm thickness (M-35) purchased from

SMC's approved paverblock manufacturer only & fixing of fine sand bedding. Item

includes levelling by using vibratory plates compacted machine. Item also includes all

materials, labour, equipments, tools, plants, watering, cleaning etc. complete.

With colour 150.00 524.00 S.M.

Without colour 150.00 524.00 S.M.

(SOR SMC GROUND DEVELOPMENT WORKS It No. 7)

Providing & fixing interlocking type Cement Concrete paver block of approved

shape & design having 60 mm thickness (M-40) purchased from SMC's approved

paverblock manufacturer only on fine sand bedding. Item includes leveling by using 50.00 553.00 S.M.

vibratory plates compacted machine. Item also includes all materials, Labour,

euipments, tools, plants, watering, cleaning etc. complete.

For Road Junction 80 mm thick ( M-50) 10.00 714.00 S.M.

(SOR SMC GROUND DEVELOPMENT WORKS It No. 8)

114 9 Providing & laying Granular sub base (GSB)confirming to Grading-II of Table

400.0 of compacted thick of 150mm with specified graded stone metal and sand

mixed in place and laid with mechanical means spreading with motor grader and

compacting with vibratory roller having minimum 80-100 KN static weight to acheve

desired density of 98% of MDD including all material, labour, machinery with all

leads and lift etc. complete.

(SOR SMC GROUND DEVELOPMENT WORKS It No. 9)

Providing & laying cement concrete Pavement using 1:1.5:3 (1 cement:1.5 sand:3

graded stone agg. 20 mm nominal size) & Vaccuum Dewatering technique 0.00 5981.00 C.M.

including floating surface with a skim powder floater, curing etc. complete.

(SOR SMC GROUND DEVELOPMENT WORKS It No. 10)

116 11 Providing & laying cement concrete Pavement using 1:2:4 (1 cement:2 sand:4 graded

stone agg. 20 mm nominal size) & Vaccuum Dewatering technique including 0.00 5245.25 C.M.

floating surface with a skim powder floater, curing etc. complete.

(SOR SMC GROUND DEVELOPMENT WORKS It No. 11)

117 12 Providing and laying 200 micron plastic sheet on prepared sub base For V.D.S

(SOR SMC GROUND DEVELOPMENT WORKS It No. 12)

118 98 Steel work welded in built up sections, framed work including cutting, hoisting,

fixing in position and applying a priming coat of red lead paint

(A) in beams & joists channels angles, tees, flats with connection plates or angle

cleats as in main & cross beams,hip & trussed purlins connected to common raffers 0.75 9108.48 Qtl.

(B)For work like chain link fencing, above compound wall etc. 0.75 9108.48 Qtl.

(C)in trusses & trussed purlins upto 25m.Span &15m.Overall height 0.75 10197.11 Qtl.

(SOR SMC Pg No. 9 It No. 98)

Providing and fixing G.I. chain link of 50mm x 50mm size x 10 guage thick with

nuts, bolts, washer or G.I. pins, excluding M.S. angles etc.complete as per relevent 30.00 311.00 S.M

IS specification & directed by engineer in charge. (TATA or Jindal Make)

(SOR SMC Pg No. 9 It No. 99)

Providing and fixing and fitting TATA or Jindal make G.I. barbed wire fencing

with necessary barbed wire (12 x 14 guage, weight not less than 0.14 kg. / mt.) pins,

hooks, excluding M.S. angles etc. complete as per relevent IS specification.&

directed by engineer in charge

(SOR SMC Pg No. 9 It No. 100)

ITEM Qty. Rate Per Amount

Expl. Providing and Fixing hot dip concertina coil of 610 mm dia. made out of 2.59 mm

(12 SWG) hot dip galvanized (G.I. coating not less than 200 gm/sqmt.) th. wire

having 80 nos. of spikes and 200 nos. of clips made out of stainless steel (AISI 304)

1.5 mm th. dia., G.I. strips 0.5 mm th. ( G.I. coating not less than 120 gm/sq.mt.) 0.00 231.00 R.M.

weight of one coil should not be lesss than 15 kg. etc., complete at the top of

compound wall fixed with S.S. clips and binding wires whereever necessary etc.

complete. ( NOTE: Strctching length of one coil should not be more than 9 mt.)

122 Self. Providing and fixing 1.20 Metre high fencing with 2.0 Metre long M.S. Angle posts

Expl. 40mm x 40 mm x6 mm and oil painting 3 coats fixed at 2.5 Mt,C/c. with five

Horizontan lines and two diagonals of galvanised steel barbed wire weighting

9.38 Kg. per 100 Metre, strained and fixed to posts with G.I,staples

including fixing the postsin ground with 0.5 M x 0.5.M x 0.5 M. block in C.C1:5:10

Providing and fixing 20 mm x 20mm x 10 gauge thick (using TATA make G.I.wire)

galvanise ironwire mesh (G.I. Crimped net) including cutting fixing etc.complete.

Providing corrugated G.I. Sheets of class-3 roofing fixed with glavanished iron

J or L Hooks, Bolts and nuts 8m diameter with bitumen and G.I. limpet washer

or G.I. limpet washer. filled with white lead complete excluding the cost of

purlins, Rafters and Trusses. (1) 0.63 mm thick sheet. (Tata / Jindal or

(SOR SMC Pg No. 9 It No. 103) 10.00 1016.00 S.M.

125 Self. Providing & fixing colour on galvaniced steel, zinc / aluminium allus coated sheet

Expl. 0.5 mm. thick roofing fixed with gslvanised grom J or L hook bolts and bolt 8mm

dia with bituman and impet washer filled with white lead etc. Excluding the cost of

purlins rafter and trusses.(TATA or Jindal Make)

126 106 Providing & fixing 150mm wide 450mm over all semicircular plain G.I. sheet

class-3 gutter with iron brackets 40mm x 3mm size bolts, nuts, washers etc.

including marking necessary connection with rain water pipes.

(i) 0.63mm thick

(SOR SMC Pg No. 10 It No. 106)

127 107 Providing ridges or hips 600mm over all in plain G.I. sheet fixed with G.I. "J" of

"L" hooks bolts and nuts 8mm dia G.I. limpet and bitumen washer complete (1) 5.00 464.00 R.M.

0.63mm thick sheet

(SOR SMC Pg No. 10 It No. 107)

Providing & Fixing UV stabilise FRP Sheet roofing with overlapping the main

cladding on both edges. All fixing holes must be predrilled oversize as specified for

the sheet length and fastener being used. Fasteners must be fitted with approved

washers. Fixings should be tightened to ensure a weatherproof seal but they must not

be over tightened Side-lap fasteners must also be installed at specified centers with

the FRP sheet having clearance holes provided as per the main fasteners

Weatherproofing shall be provided at all flashing points under the normal flashing by

the fitting of a foam closure strip to match the profile being used. Closure strips will

be sealed to the sheet with an appropriate non setting silicone sealant. Excluding the

cost of purlins rafter and trusses.

(b) 2 mm thick 50.00 1100.00 S.M.

(SOR SMC Pg No. 10 It No. 108)

Providing & Fixing Polycarbonate sheet roofing with surface of the sheet is

coated with an anti-UV Co-extrusion layer having good weather resistance, it can

maintain its optical properties and mechanical performance for a long time. Fasting is

usually done by screws. , The fastening screws should be inserted about 500 mm

apart and 300mm apart Along the supporting internal purlin and edge pulin.All

fixing holes with diameter at least 2 mm larger than screw must be predrilled into

each screw location. The screws should be 6mm diameter with length according to

sheet thickness and corrosion resistant, with at least heavy duty hot dripped

galvanized or stainless steel. Excluding the cost of purlins rafter and trusses.

(a) 1.5 mm thick Solid Sheet 5.00 1261.00 S.M.

(b) 2 mm thick Solid Sheet 5.00 1510.00 S.M.

(SOR SMC Pg No. 10 It No. 109)

Pro.& fixing corrugated ACRYLIC COLOURED - 1.m mm roofing fixed with

galvanized from 'J' or 'L' hook bolts & bolt 8 mm dia with bitumen and Limpet 0.00 500.00 S.M.

washer filled with white \lead etc. comp. excluding the cost of purlins rafter & trusses

ITEM Qty. Rate Per Amount

131 128 Providing and fixing rolling shutters of approved make made of 80 mm wide

M.S. laths inter locked together through their entire lenght and jointed together

at the ends by end locks mounted on specially designed pipe shaft with

bracket plates, guide channels and arrangements for inside and outside

locking with push-pull operation including the cost of hood cover and spring

etc. complete (A) Shutters having width below 3.5 M.

(A) Shutters having width below 3.5m 1.00 3554.40 S.M.

(SOR SMC Pg No. 12 It No. 128)

132 110 Providing & Fixing 80 mm dia M.S. pipe as vertical post are beded in 1:1.5:3

concrete also horizontaly in line and connecting to purline angle etc by welding 10.00 750.00 R.M.

rereting etc. (a) Medium duty "B" Class

(SOR SMC Pg No. 10 It No. 110)

133 111 Providing & Fixing 50 mm dia M.S. pipe as vertical post are beded in 1:1.5:3

concrete also horizontaly in line and connecting to purline angle etc by welding 25.00 485.00 R.M.

rereting etc. (a) Medium duty "B" Class

(SOR SMC Pg No. 10 It No. 111)

134 112 Providing & fixing black board on walls of 1.8mt.x1.2mtsize made up to

mmth.B.W.P .Plywood (Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock or

century) fixed with teak wood beading of 65 mmx 50mm size, rubbing & sanding

comp., incl. applying two coats of black board paint over a priming coat on plywood

& French polishing the frame all round etc. Comp. as per instruction of Engineer in

(SOR SMC Pg No. 10 It No. 112)

135 115 Providing & Fixing Reading table size 8' x 4' and height 2'-6" with table top

18mm thick (Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century)

commercial plywood with 1.0mm thick lamination sheet fitting with teakwood

moulding table top supported on 3" x 3" teakwood leg & 3" x 11/2" teakwood

framing top and bottom with french polish labour work hardware etc. as per site in

charge instruction and as per drawing.

(SOR SMC Pg No. 10 It No. 115)

Providing & Fixing Librarian table with 18mm thick commercial plywood (Brand

Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) )with 1.0mm thick

lamination sheet table top supported on 2" x 2" teakwood leg & make 3 nos. drawers

of 1' 3" width on both side with necessary french polish hardware labour etc. as per

site incharge instruction and as per drawing ( Size 4' x 2'-6" x 2'-6", all framing

other then legs are teak wood of size 2" x 1")

(SOR SMC Pg No. 10 It No. 116)

Expl. Labour work for chiesel shape(Bhala type) of grill square bar or Round Bar. 0.00 10.00 No.

Providing & Fixing 8 mm dia Chain For Swing 0.00 120.00 No.

Expl. Providing & Fixing Kada For Swing 0.00 360.00 No.

140 132 Providing and Fixing Hollow steel Sections Framed Work including Cutting,

Hoisting, Welding & Fixing in position Purlin, Main Chord etc. as per Engineer in-

charge.TATA / JINDAL / ASIAN Make

(SOR SMC Pg No. 12 It No. 132)

Cutting out cracks of roof terrace to V- section cleaning out, wetting

grouting with cement and sand slurry 1:3 (1-cement 3-sand )

Expl. Providing & fixing Wooden file storage/divider 7.00' height with all outer surface

laminate finish using 18 mm th vertical,horizontal and shutter , selves commercial

plywood approved make, 01 mm th SF finish laminates,teakwood liping,brass 50.00 407.00 Sq.ft.

hinges, ss handle lock,megnate & necessary hardware materials etc.inside and liping

franch polish finish complete in all respects by Engineer in charge

Expl. Providing & fixing hard drawn wire fabrics 75 mm x 25 mm MESH of weight not

less than 7.75 kg/s.m to windows/ventilators frames etc. at all floor levels including

60 mm x 20 mm bidding of teakwood incuding providing and fixing salwood frames

7 cm x 7 cm size for ventilators etc complete.

For Ventilators all floor. 0.00 1342.00 S.M.

144 Self. Applying polymer modify mortar in proportion at 1:2(one part cement: 2 part white

Expl. sand(sweet water) with chemical(SBR) dosage of minimum 5 litre pe bag of cement.

Also apply bonding agent prior to polymer modify mortar in proportion of (1:1)(1

part SBR : 1 part cement) using Roof, MC and FOSROC

Beam / Columns 0.00 1830.00 S.M.

Ceiling 0.00 1830.00 S.M.

ITEM Qty. Rate Per Amount

145 76 Crack Repairs:-Crack filling using fiber reinforced polymer modified mortar after

openning crack in "V" grove, Making Surface dust free, with a bond coat of polymer 100.00 120.00 R.M.

as per the data sheet for crack repairing cracks less than 8mm

Providing and fixing rebar of following diameter using chemical grout of

Swanchore/Hilti/Fischer or equivalent make including cost of all

equipments, tools, material, labour, etc. Standard procedure as

mentioned in manufacturer's specifications shall be strictly followed, which shall be

submitted and got approved from the authority prior to start of work. The rate shall

also include cost of drilling of hole of required diameter and depth as mentioned in

manufacturer's specification,cleaning the hole with required air blower and other

necessary tools and tackles, positioning, providing and grouting chemical, allied

fixtures and fasteners, etc. but excluding the cost of reinforcing bar etc. complete.

Item includes necessary scaffolding, staging, labour, tools and equipments,etc.

complete as directed by the engineer-in-charge.

(D) 16 mmm dia 0.00 190.00 No.

(E) 20 mmm dia 0.00 340.00 No.

(F) 25 mmm dia 0.00 500.00 No.

(SOR SMC Pg No. 11 It No. 120)

147 126 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,

channels, plates etc., including welding, grinding, buffing, polishing and

making curvature (wherever required) and fitting the same with necessary

stainless steel nuts and bolts complete, i/c fixing the railing with necessary

accessories & stainless steel dash fasteners, stainless steel bolts etc., of

required size, on the top of the floor or the side of waist slab with suitable

arrangement as per approval of Engineer-incharge, (for payment purpose only

weight of stainless steel members shall be considered excluding fixing

accessories such as nuts, bolts, fasteners etc.).

(SOR SMC Pg No. 12 It No. 126)

WATER SUPPLY & SANITARY ITEMS

148 13 Prov.& Fixing water closet squatting pan (Orissa type W.C.pan) at all

floor levels, size 500mm x 400 mm incl. 100 mm size "P'or "S" trap for

water closet squatting pan joining the trap with the pan & soil pipe in

C.M. 1:1 (1cement :1 fine sand) etc. Comp.(A) Vitreous china long

Make- Cera S3010109, Parry ware C0117CS/C0117* , Jaquar, HindWare 20143 25.00 3277.39 No.

(SOR SMC Sanitary Items It No. 13)

Providing and fixing Wash Down Water closet European type W.C. pan with

integral P or S trap with normal closing seat cover L bend including jointing the trap

with soil pipe in cement mortar 1:1 (1 cement : 1 find sand) (A) Viterous china

Make- Cera CONVENTIONAL B1510121 , Parry ware C0297*/ C0278,

HindWare sleek 20011, Jaquar- CNS-WHT-751P180SPPZ

(SOR SMC Sanitary Items It No. 6)

150 69 Providing and fixing plastic seat and cover for wash down water closet with C.P.

brass hinges and rubber buffers (B) Black plastic seat and cover.

(SOR SMC Pg No. 7 It No. 69)

151 8 Providing & fixing white vitreous china urinal of size 450 x325mm as

per IS-2556 (Part-2 ) with C.I. hangers and 15mm dia. C.P.

spreader,32mm dia CP bottle trap and pipe to wall with C.P. flange

complete including cutting and making good the walls and floors

wherever required.

Make- CeraCat. No. S4020103, Parry ware C0501*, Jaquar URS WHT-13261H

HindWare BACK SMALL

(SOR SMC Sanitary Items It No. 8)

152 7 Providing & fixing Wash Hung basin with single hole for pillar tap

Size- 550 x 400 mm at all floor levels, with C.I. or M.S. Brackets

painted white incl. cutting holes & making good the same etc.

complete. For all Floor

Make- Cera Cat. No. S2040121, Parry wareC0434* (CTH), Jaquar

SLS- WHT -6801 ,HindWare10004

(SOR SMC Sanitary Items It No. 7)

Providing & fixing 600 mm.x 450 mm. mirror of superior glass at all floor

levels, mounted on 6 mm. th. A.C. sheet or plywood sheet & fixed to wooden 20.00 859.41 No.

plugs with C.P.brass screws and washers etc. For all Floor

(SOR SMC Pg No. 7 It No. 72)

ITEM Qty. Rate Per Amount

Providing and fixing Towel Ring fabricated from seamless stainless

steel tube 2mm thick in bath room with polished wall flange at end of

bars with heavy duty anchor fasteners & accessories.

Make- Cera F5014115CH, Parry ware F5014115CH, Jaqua ACN 1121N ,HindWare

(SOR SMC Sanitary Items It No.10)

155 11 Providing & fixing S.S.towel rail of 600 mm long approved make

including, providing & fixing C.P. brass screws, making holes in walls

Make- Cera F5015103CH, Parry ware F880005T, Jaquar 1111BSM

,HindWare F880005T

(SOR SMC Sanitary Items It No.11)

Providing & Fixing stainless steel recessed type Soap dish of

approved make. Including providing & fixing screws, washers, cutting

& making good the walls

Make- Cera F5007106, Parry ware T6902A1, Jaquar ACN-1131N

,HindWare F880011

(SOR SMC Sanitary Items It No.12)

157 14 Providing & fixing Health Faucet ABS Body with wall Hook & 1 Meter Chrome

plated PVC Hose Pipe.

Make- Cera F8030106AB, Parry ware T9874A1, Jaquar ALD-587

,HindWare F160109

(SOR SMC Sanitary Items It No.14)

158 73 Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M 1:5)chamber

& water tight C.I. cover with frame of 300mmx300mm size (inside) with weight to

be not less than 4.53kg, includ. plastering smooth inside & outside 15mm. th' in

C.M.1:3 etc. comp. (i) Square mouth traps---

(A) 100mm x 100mm Size -P type 20.00 1292.19 No.

(B) 150mm x 100mm Size- P Type 20.00 1246.92 No.

(SOR SMC Pg No. 7 It No. 73)

159 74 Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M 1:5)chamber

& water tight Pre cast R.C.C. cover of 300mmx300mm size (inside) includ.

plastering smooth inside & outside 15mm. th' in C.M.1:3 etc. comp. (i) Square mouth

(A) 300mm x 300mm Size -P type 20.00 1098.05 No.

(B) 150mm x 100mm Size- P Type 20.00 1052.77 No.

(SOR SMC Pg No. 7 It No. 74)

160 75 Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside dimension ,455 x

mm & 450 mm deep sewer trap chamber with 23 cm th' B.B. masonary walls in

C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3 inside & outside to exposed

faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone aggregate

20mm size) ,Foundation concrete 1:5:10 & fixing C.I. cover with frame to be not

less than 38 kg. On top etc. comp. for single pipe.

.(A).Same as above but Precast RCC heavy duty Cover instead of C.I. Cover 3.00 2915.61 No.

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 2.00 233.85 Each

(SOR SMC Pg No. 7 It No. 75)

Providing & construction simple chamber of 23 cm. th' B.B. Masonary in C.M 1:5

with cement plaster 15 mm th' in C.M. 1:3 inside & outside to exposed faces, R.C.C.

top slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone aggregate 20mm size) 10.00 2932.93 No.

,Foundation concrete 1:5:10 & fixing C.I. cover with frame to be not less than 38 kg.

On top etc. comp. Inside dimension,455 x 610 mm &450 mm deep for single pipe

.(A).Same as above but Precast RCC heavy duty Cover instead of C.I. Cover 10.00 2681.76 No.

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 5.00 242.39 Each

(SOR SMC Pg No. 7 It No. 76)

Providing, Lowering & laying joining R.C.C. NP2 CLASS Pipe In C.M. 1:1 of

following nominal internal diameters incl. Testing of pipes and joints etc. Comp

(SOR SMC Pg No. 7 It No. 77)

163 78 Providing & laying in trenches galvanised mild steel tubes(medium grade) TATA /

ZENITH / ASIAN / JINDAL MAKE of the following nominal bore & tube fittings

(SOR SMC Pg No. 7 It No. 78)

ITEM Qty. Rate Per Amount

164 79 Providing & Fixing to wall, ceiling floor at all floor levels, galvanised mild steel

tubes(medium grade) TATA / ZENITH / ASIAN / JINDAL MAKE of the

following nominal bore, tube, fittings & clamps incl. making good the wall ceiling

and floor etc. complete.

(SOR SMC Pg No. 7 It No. 79)

Providing and fixing 15mm Dia bib tap with wall Flange at all floor levels,polished

bright etc. Comp.

Make- Cera F2013151 BIB COCK, Parry wareG3104A1, HindWare

F280002 BIB COCK, Jaquar FLR-5047 N BIB COCK

(SOR SMC Sanitary Items It No.2)

166 80 Providing & Fixing gun metal check or non return full way wheel valve at all

floors levels, etc. complete.

(SOR SMC Pg No. 7 It No. 80)

Providing and fixing Screw down stop taps (a) 15 mm. dia. 35.00 241.39 No.

168 Self. Providing & fixing Metropole flush valve with wall flange 25mm with lever Knob at

Expl. all floor levels, of approved quality incl. Fixing in pipe line etc. Comp

Make -Cera,Parry ware, Jaquar, Hindware 20.00 1690.00 No

169 80 Providing & Fixing C.P. Brass screw down bib tap at all floor levels, polished

bright etc. comp.-(A) 15mm dia. For all Floors

(SOR SMC Pg No. 7 It No. 80)

Providing Flush Cock consisting lever, cartridge sleeve & flange & concealed part

Make- Cera EXPOSED PART F2013751 &Concealed part F4060101

Parry ware T9824A1&T9823A1, Jaquar FLR 5083 KN , CONCEALED

BODY ALD-081,HindWare F280052 & CONCEALED STOP COCK

(SOR SMC Sanitary Items It No.4)

171 5 Providing & fixing 15mm C.P. Brass angle valve (stop cock) with C.P. Copper

connecting pipe 450mm long and nuts, washer and brass flange complete, including

cutting and making good the wall where required.

Make- Cera F1020362, Parry ware T0712A1, HindWare Cat. No.:

F440020 F850094, jaquar CON 053 KN

(SOR SMC Sanitary Items It No.5)

172 1 Providing and fixing C.P. Brass pillar cock with copper connection ,C.P. Brass

screws complete

Make- Cera F2013101, Parry ware Cat. No.: G3102A1, HindWare Cat.

No.: F650003, Jaquar FLR-5011N

(SOR SMC Sanitary Items It No.1)

Expl. Providing and fixing waste Pipe for Washbasin or sink (A ) 32 mm Dia 150.00 99.08 No.

Expl. Providing and fixing Supply Pipe for Washbasin or sink 150.00 80.00 No.

Expl. Providing and fixing Jet Sprey Cock at all floor level etc. complete. 50.00 500.00 No.

176 101 Providing and fixing

(A) 40 mm thick RCC cover for simple chamber,s.w.trap & tank Top 50.00 400.00 No.

(B) PVC water tank cover upto 2000 Lit. 50.00 200.00 No.

177 Self. Supplying and fixing C.I. cover 300 mm X 300mm. without frame for gully trap

Expl. (standard pattern) the weight of cover to be not less than 4.53 Kg.

178 83 Providing and fixing C.I. Manhole cover 0.60 x 0.45 mt. Size having weight not

less than 35 Kg. etc. complete.

(SOR SMC Pg No. 8 It No. 83)

Providing & Fixing U-PVC pipe (SWR) confirming to IS no. 13592 (Type "B")

of Prince/Supreme/Jain/Astral/Tulsi/Finolex make for soil and waste

discharge system at all floor levels incl. All fixtures like bends, tees, shoe etc.

jointed with resin of approved brand & manufacture etc. comp. (M.R.)

ITEM Qty. Rate Per Amount

(SOR SMC Pg No. 8 It No. 84)

180 85 Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type "A") of

Prince/Supreme/Jain/Astral/ Tulsi/Finolex make for rain water at all floor

levels incl. fixtures like bends, tees, shoe etc joined with resin of approved

brand & manufacture etc. comp. (M.R.)

(SOR SMC Pg No. 8 It No. 85)

Providing, Laying and jointing on true line and level UPVC pipe (SCH-40) line

of Prince/Supreme/Jain/Astral/ Tulsi/Finolex make including fittings make

or equivalent as approved by angineer-in-charge. Pipe shall be fixed on the

wall the help of clamp at every two meter C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all materials.

(SOR SMC Pg No. 8 It No. 86)

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/ Astral/

Tulsi/Finolex make for water supply line at all floor levels incl. fixtures like bends,

tees, shoe etc joined with resin of approved brand & manufacture etc. comp. Pipe

shall be fixed on the wall the help of clamp at every two meter C/C or shall be

concealed as directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all materials.

(SOR SMC Pg No. 8 It No. 87)

183 88 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 110x110 mm

diameter with jali of the following nominal diameter of self cleaning design with

C.I. scread down or hinged grating including the cost of cutting and making 20.00 586.27 No.

good the walls.

(SOR SMC Pg No. 8 It No. 88)

Expl. Providing and fixing 100x 100 mm Size P.V.C /C.I Greting (Jali ) for Nani Trap. 20.00 43.63 No.

185 89 Providing & Fixing in position PVC Cowl vent to pipes of

Prince/Supreme/Jain/Astral/Tulsi/Finolex make etc.Comp.

(SOR SMC Pg No. 8 It No. 89)

186 90 Providing & fixing M.S. Holder Bat clamps at all floor levels of approved design to

C.I. Or S.C.I pipes including the cost of cutting holes & making good the wall etc. 20.00 30.00 No.

Complete - 100 mm. dia. (M.R.)

(SOR SMC Pg No. 8 It No. 90)

187 91 Providing & fixing G.I./Aluminum Patti clamps at all floor levels of approved

design to C.I. Or S.C.I pipes including the cost of cutting holes & making good the 50.00 20.00 No.

wall etc. Complete - 100 mm. dia. (M.R.)

(SOR SMC Pg No. 8 It No. 91)

188 93 Providing & Fixing Kathi around the vertical PVC drainage pipes for concealing

with cement plaster 20 mm avg thickness(CM 1:3 [1 cement :3 coarse sand])

finishing as per instruction given by Eng. incharge. for

(A) 75 mm PVC PIPE 50.00 173.00 R.M.

(B) 100 mm /110 mm PVC PIPE 50.00 180.00 R.M.

(SOR SMC Pg No. 8 It No. 93)

189 92 Providing erecting and fixing double coated Syntex/Super/Reno PVC (ISI) mark

water tank of required capacity each with all necessary fittings & connection etc. 1000.00 3.95 Lit.

complete on terrace.

(SOR SMC Pg No. 8 It No. 92)

Expl. Providing & construction Septic tank as per the drawing clear size 4.0 mt.x

1.40mt.x1.60 mt. incl. Necessary excavation & refilling & disposing the surplus

excavated earth within 50 mt. lead incl. bedding of 25cm th' brick masonary in

C.M.1:6 & partition wall in C.M. 1:4 incl. 10mm th' cement plaster in C.M.1:4 to

brick wall & 15 cm. th'. R.C.C slab on the top using 1:2:4 C.C excluding

reinforcement as per the structural design with fixing C.I cover of 0.60mt.x

0.45mt.size & wt. Not less than 35 Kg. & providing necessary fittings as per drawing

or as directed by Engineer in charge etc. comp. ( Steel- 84.21 Kg.)

ITEM Qty. Rate Per Amount

Expl. Providing & construction Septic tank as per the drawing clear size 8.0 mt.x

2.6mt.x1.34 mt. incl. Necessary excavation & refilling & disposing the surplus

excavated earth within 50 mt. lead incl. bedding of 25cm th' brick masonary in

C.M.1:6 & partition wall in C.M. 1:4 incl. 10mm th' cement plaster in C.M.1:4 to

brick wall & 15 cm. th'. R.C.C slab on the top using 1:2:4 C.C excluding

reinforcement as per the structural design with fixing C.I cover of 0.60mt.x

0.45mt.size & wt. Not less than 35 Kg. & providing necessary fittings as per drawing

or as directed by Engineer in charge etc. comp.. ( Steel- 315.0 Kg.)

192 Self. Providing & constructing soak pit as per drawing clear size 2.0 mt. dia. &

Expl. 6mt.depth with necessary excavation,refilling&disposing of surplus excavated earth

within 50 mt. lead, constructing 23 cm th.masonary in C.M. 1:6 for 3.0mt below G.L,

incl.10 cm th. R.C.C slab on top using C.C. 1:2:4 excluding the reinf. As per the 0.00 21582.69 No.

structural design with fixing C.I. cover 0.6mt. x 0.45mt.size weight not less than

Kg. & pro. Necessary filling as per drawing or as directed by Engineer-in-charge

etc. ( Steel- 31.5 Kg.)

Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work incl. boxing, centering,

vibrating, curing & mixed with approved water proofing cement compound or

"CEMWET"or"PIDICRETE LW"integral water proofing admixture as water

proofing agent to be mixed with 50 kg. cement bag shall be as recommended by the

manufacture of the water proofing material, concrete work for top, bottom slab &

side pardi for Under ground Tank & Item incl. Necessary excavation & refilling the

available earth, 15 cm th' C.C 1:4:8 for bedding concrete, Half B.M. in C.M. 1:4

outside wall, inside R.C.C. pardi as per design, 10mm.th. water proofing cement

plaster in C.M. 1:3 with smooth finishing,watering etc.Comp.to all inner face &

bottom of tank curing etc. comp. incl. Locking arrangement, outlet, inlet, overflow &

wash out pipe arrangement as necessary & C.I. Cover 0.60 x .045 weight not less

then 35kg. etc. com. as per structural drawing excluding Steel & as directed by

Engineer-in-charge

Underground tank 0.00 6.87 Lit.

(SOR SMC Pg No. 6 It No. 60)

Providing & Laying Commercial Quality white glazed tiles 6mm. th. in flooring

laid on a bed of 20 mm. Av. Th.C.M.1:3(1cement :3 sand ) & on wall Of R.C.C.

Tank with necessary cement paste for fixing and joined with white cement slurry etc.

complete. finished with flush pointing in white cement etc.com.

197 61 Providing and filling in depressions of Bath and W.C. At all floor levels, after

completing plumbing work of pans, pipes,traps etc.with cinder or fly ash as 5.00 500.00 C.M.

directed by Engineer in charge etc. comp..

(SOR SMC Pg No. 6 It No. 61)

198 62 NOTE :- (1) The whole work is to be executed through specialized agency with a

guarantee of 10 (Ten) years given on a prescribed proforma duly stamped (2) The

rate shall include for work at all floors & conducting water proof test as directed.

(A) Providing and laying water proofing treatment to vertical and horizontal

surfaces of depressed portions of W.C.,kitchen and the like consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing

compound conforming to IS : 2645 in recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with water proofing compound

confirming to IS:2645 about 25 mm. th' in the floor of the depression & about 18mm

th' On the side walls of the depression up to the floor level, water proofing plaster 250.00 296.00 S.M.

about 18 mm. th' be continued on the walls above the floor level for a height of

mm. with surface suitable to receive further treatment

(c) Finishing top with stone aggregate 10mm to 12mm nominal size spreading

@0.008 C.M./S.M., thoroughly embedad in plaster layer.

as per specifications & instructions of Engineer in charge (Cement consumption

0.316 Bags / S.M.)

(B) Providing and laying integral cement based water proofing treatment including

preparation of surface as required for treatment of roofs, balconies, terraces etc.

consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement

admixed with proprietary water proofing compound comforming to IS:2645 over the

R.C.C. slab including cleaning the surface before tratment.

(b) Laying cement concrete using broken bricks/brick bats 25 mm to 100 mm size

with 50% of cement mortar 1:5 (1 Cement : 5 Coarse sand) admixed with proprietary

water proofing compound conforming to IS:2645 ,brick bats is finally covered by

jointless cement plaster 20mm th. in C.M. 1:4 added with special water proofing

compound confirming to IS:2645 & top smooth finished with trowel with false

chequered marking of 300 mm.size.The treatment is carried along the vertical surface

of the parapet & other adjoining wall up to height of about 300 mm in a shape of

quarter round vata Incl. curing etc. Comp. With average thickness of 120 mm and

minimum thickness at khurra as 65 mm.

ITEM Qty. Rate Per Amount

(c) The whole terrace so finished shall be flooded with water for a minimum period

of two weeks for curing and for final test. All above operations to be down in order

and as directed and specified by the engineer-in-charge. With average thickness of 150.00 511.00 S.M.

120 mm and minimum thickness at khurra as 65 mm. (Cement consumption

(SOR SMC Pg No. 6 It No. 62)

Proiding & laying water proofing treatment to vertical and horizontal surfaces like

consisting of (a) I course of applying cement slurry 4.4 kg per sq.mt. mixed with

water proofing compound confirming to IS:2645 in rcommended proportions. (b) II

corse of 20mm cement plaster 1:3 mixed with water proofing compound in

recommended proportion (c) III course of applying blown or / resideal bitumen

applied hot at 1.7 kg per sqm of area. (d) IV course of 400mm micron th. PVC sheet.

(Overlaps at joints of PVC sheet should be 200mm wide and pasted to each other

with bitumen about 1.7 kg./ sqm.)

(SOR SMC Pg No. 6 It No. 63)

200 133 Providing cement vata (10 cm x 10 cm size) quarter round in cement mortar 1:1

including neat cement finishing, watering etc. complete

(SOR SMC Pg No. 12 It No. 133)

201 64 Providing & fixing G.I. Rain water spout of 50 mm.dia & 30 cm length etc. 75.00 101.91 No.

(SOR SMC Pg No. 6 It No. 64)

67 Prov.& Fixing water closet squatting pan (Indian type W.C.pan) at all floor

levels, size 580mm incl. 100 mm size "P'or "S" trap for water closet squatting

202 pan joining the trap with the pan & soil pipe in C.M. 1:1 (1cement :1 fine 15.00 1471.41 No.

sand) etc. Comp.(A) Vitreous china long pattern of approved colour For all

(SOR SMC Pg No. 7 It No. 67)

Providing and fixing Wash Down Water closet European type W.C. pan with

integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (1

cement : 1 find sand) (seat and cover to be measured and paid for separately) (A)

Viterous china pattern - I (i) in approved colour

(SOR SMC Pg No. 7 It No. 68)

Providing & fixing wash basin with single hole for pillar tap at all floor levels, with

C.I. or M.S. Brackets painted white incl. cutting holes & making good the same incl.

fittings such as pillar tap, capstan head screw down high pressure with screws,

shanks & back nuts, C.P. Brass waste trap, screw down stop tap 15 mm. dia. etc.

complete. (A) Vitreous china flat back wash basin 550 mm.x 400 mm. size in

approved colour For all Floor

(SOR SMC Pg No. 7 It No. 70)

71 Providing & fixing Urinal or approved quality including conecting the Urinal with

205 waste pipe, tap etc. complete. (A) White earthenware flat back or corner type size 25.00 1074.86 No.

(SOR SMC Pg No. 7 It No. 71)

81 Providing & Fixing chromium plated brass half turn flush cock at all floor levels, of

approved quality incl. fixing in pipe line etc. Comp.-- 25 mm dia.

(SOR SMC Pg No. 8 It No. 81)

Providing & Fixing abonite ball cock of approved qualities directed etc. comp. (A)

(SOR SMC Pg No. 8 It No. 82)

208 113 Providing & fixing Green board on walls of 1.8mt.x1.2mt size made up to

18 mm th.ply (using IS 710 Marin ply) with 1 mm thick outside green

board & 0.8mm backside white laminate & with good Quality of adhesive

with appropriate fittings of Alluminium fittings or teak wood bedding

mmx 50mm size, rubbing & sanding comp., as per instruction of Engineer

in charge (M.R.)

(SOR SMC Pg No. 10 It No. 113)

209 114 Providing & fixing White board on walls of 1.8mt.x1.2mt size of 12mm

thick with appropriate fittings and Alluminium fittings comp., as per 0.00 4230.00 No.

instruction of Engineer in charge (M.R.)

(SOR SMC Pg No. 10 It No. 114)

210 117 Providing & Fixing simple 12mm thick commercial plywood (Brand

Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) Rack of size 6'

x4' and depth 1'-6" 5 Nos. horizontal partition, supported 2" x 1" framing with

necessary french polish hardware labour etc. as per site incharge instruction

and as per drawing.

(SOR SMC Pg No. 11 It No. 117)

Providing & Fixing fitting commercial 8mm thick plywood (Brand

Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) magazine

stand of Size 6' x 4' with 3" x 11/2" vertical supporting and adjustable lag

support and horizontal simple 2" x 1" teakwood patti for magazine support

with necessary french polish hardware labour etc.as per site in charges

instruction and as per drawing.

(SOR SMC Pg No. 11 It No. 118)

Welding Charge 50.00 606.00 R.M

ITEM Qty. Rate Per Amount

Providing and fixing 150 mm wide, approved quality chicken wire mesh (FRP

/ PVC)at junction of brick work and RCC work or two dissimilar surfaces, at

all heights fixed by nails, rowal plugs or tag by cement mortar 1:3 before applying the

plaster, including curing, scaffolding all complete as directed.

(SOR SMC Pg No. 11 It No. 124)

214 125 Providing and filling Epoxy grout of approved or suggested brand by

consultant / Engineer in charge in 4mm to 6mm thick tiles joint including spacer 10.00 40.00 R.M

with cleaning of joint by vacuum or blower etc

(SOR SMC Pg No. 11 It No. 125)

215 13 Cutting of Groove 5 to 7 mm thick in VDS for depth 1/3 of total thickness

with filling of epoxy sealent as directed by engineer in charge

(SOR SMC GROUND DEVELOPMENT WORK It No. 13)

216 Part -B WATER BORING

A Self. Labour charges for 6" Dia. Drilling in all Kind of soil up to required depth with

Expl. necessary gravel packing etc,all comp.

B Self. Providing & Erecting 5"inch P.V.C. plain CS pipe of standard make

Expl. (Finolex,Sumolex,Ashirwad) to be erected as casing pipe in bore etc.comp.

C Self. Providing & Erecting 5"inch P.V.C.stainer of standard make

Expl. (Finolex,Sumolex,Ashirwad) to be erected as casing pipe in bore etc.comp. 0.00 426.40 R.M

D Self. Providing & Lowering 40" Dia, H.D.P.E. Std. pipe of standard make (Gindal) with

Expl. required fitting etc. comp. as directed 0.00 80.36 R.M

E Self. Providing & Lowering 25" Dia, G.I.Std. pipe of standard make with required fitting

Expl. etc. comp. as directed 0.00 321.44 R.M

Providing & fixing bend, Coupling, M.S. clamp, Adaptor Set with Required 0.00 3000.00 No.

G Self. Providing & Lowering of standard make pump set with necessary ISI cable,SD

Expl. starter switch all Required, Pump set having capacity of 106 LPM at 40 mtr. head 0.00 21500.00 No.

capacity 2HP all comp.

TOTAL AMOUNT RS.

TOTAL AMOUNT RS.

EXECUTIVE ENGINEER

SURAT MUNICIPAL CORPORATION