Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.7 LAccepted-AOC PARACKAT HOUSE KAPRASSERY NEDUMBASSERY PO | L1 | Accepted-AOC L1 | |
| 2 | L2₹5.2 L+₹50,902.71 (10.9%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹5.2 L+₹57,659.80 (12.4%)Rejected-Finance | L3 | Rejected-Finance L3 | |
| 4 | Rejected-Technical KOICKAL H POICKATTUSSERY CHENGAMANADU KERALA | ERNAKULAM | KERALA | 683572 | - | Rejected-Technical L5 | |
| 5 | Not Admitted-Fee/PreQual/Technical/Finance PANAPILLY HOUSE KUTTAMASSERY THOTTUMUGHAM P O ALUVA 5 ERNAKULAM | ERNAKULAM | KERALA | 680667 | - | Not Admitted-Fee/PreQual/Technical/Finance Others-SBD and license were not uploaded |
| Sl No | Description | Qty | Unit | Alan Pauly L3 | C P ABOOBACKER L2 | ITTEERA K.I. L5 | Varghese Antony L4 | SUJITH BHASKARAN L1 |
|---|---|---|---|---|---|---|---|---|
| 1.00Estimate | ||||||||
| 1.00 | 15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet | 120 | sqm | 145.62 ₹17,474.4 | 143.75 ₹17,250 | 161.82 ₹19,418.4 | 146.61 ₹17,593.2 | 100 ₹12,000 Lowest |
| 1.00 | 15.14.1:Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead:Of sectional area 40 square centimetres and above | 0.82 | cum | 3,935.1 ₹3,218.91 | 3,884.42 ₹3,177.46 | 4,372.85 ₹3,576.99 | 3,961.83 ₹3,240.78 | 3,500 ₹2,863 Lowest |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 120.4 | sqm | 719.19 ₹86,590.48 | 709.92 ₹85,474.37 | 799.19 ₹96,222.48 | 724.07 ₹87,178.03 | 700 ₹84,280 Lowest |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 685 | kg | 197.21 ₹1,35,088.85 | 194.67 ₹1,33,348.95 | 219.15 ₹1,50,117.75 | 198.55 ₹1,36,006.75 | 185 ₹1,26,725 Lowest |
| 1.00 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 32 | metre | 482.55 ₹15,441.6 | 476.34 ₹15,242.88 Lowest | 536.23 ₹17,159.36 | 485.83 ₹15,546.56 | 500 ₹16,000 |
| 1.01 | 50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 1.2 | cum | 6,216.29 ₹7,459.55 | 6,136.22 ₹7,363.46 Lowest | 6,907.8 ₹8,289.36 | 6,258.51 ₹7,510.21 | 7,000 ₹8,400 |
| 1.01 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 34.4 | sqm | 315.78 ₹10,862.83 | 311.71 ₹10,722.82 Lowest | 350.9 ₹12,070.96 | 317.92 ₹10,936.45 | 350 ₹12,040 |
| 1.01 | 21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ). | 52.2 | kg | 722.43 ₹37,710.85 | 713.13 ₹37,225.39 | 802.8 ₹41,906.16 | 727.34 ₹37,967.15 | 700 ₹36,540 Lowest |
| 1.01 | 50.12.4.2:Providing and fixing false ceiling with 7.5 mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately) | 34.43 | sqm | 869.03 ₹29,920.7 | 857.84 ₹29,535.43 | 965.7 ₹33,249.05 | 874.93 ₹30,123.84 | 700 ₹24,101 Lowest |
Tender Value
₹6.1 L
EMD Value
₹15,355
Closing Date
7 Aug 2026, 11:00 amClosed
Assistant Executive Engineer
O/O Assistant Executive EngineerBuildings Sub division Aluva.
Reroofing existing GI sheet Repair to plaster Scraping Painting with acrylic emulsion paint Repair of Ceramic floor wall tile for toilets windows and doors repair PVC pipes for toilets RR masonry for compound wall
2026_PWD_862919_1
PWD/BLDG/TR/9335/2025_5_1_1/1
Open Tender
Civil Works - Buildings
Item Rate
120 days
Aluva
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,355
₹15,355
Yes
25 Sept 2026
28 Jul 2026
10 Aug 2026
28 Jul 2026
7 Aug 2026
28 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Estimate | |||||
| 1.001 | 15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet | - | sqm | - | - |
| 1.002 | 15.14.1:Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead:Of sectional area 40 square centimetres and above | - | cum | - | - |
| 1.003 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | - | sqm | - | - |
| 1.004 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | - | kg | - | - |
| 1.005 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | - | metre | - | - |
| 1.006 | 50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 1 | cum | - | - |
| 1.007 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 1 | sqm | - | - |
| 1.008 | 21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ). | - | kg | - | - |
| 1.009 | 50.12.4.2:Providing and fixing false ceiling with 7.5 mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately) | 1 | sqm | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.05 MB
formoftender.pdf
Tender Documents • 0.36 MB
instruction.pdf
Tender Documents • 0.45 MB
affidavit-1.pdf
Tender Documents • 0.17 MB
Preagt.pdf
Tender Documents • 0.43 MB
SBD.pdf
Other Document • 1.64 MB
BOQ_1459593.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .