S.R. to 42 Commonpool Staff Qtrs (Block - A) Dist. Bharuch (Repairs to Plaster Work, Plumbing Work, Weather Shed & Colour Work).

Name of work : S.R. to 42 Commonpool Staff Qtrs (Block - A) Dist. Bharuch (Repairs

to Plaster Work, Plumbing Work, Weather Shed & Colour Work).

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

1 Removing and scraping of old deteriorated plaster of any 73.00 Sqm 18.94

thickness from wall / R.C.C member including stacking of

serviceable material and disposal of unserviceable from

site of work with all lead and lift.

2 Providing laying and jointing in true line and level 25mm 48.00 Rmt 91.84

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings make as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent,

including cost of all materials.

3 Providing 15mm thick cement plaster in single coat on 39.04 Sqm 212.52

Rough (Similar)side of single or half brick walls for interior

plastering upto floor two level and finished even and

smooth in (i) Cement mortar 1:3 (l-cement:3-sand).

4 Providing and fixing window having extruded 6.00 Sqm 1583.95

aluminum Colour anodized section frame main outer size

95mm x 24mm x 1.17m'm (of jindal section no:2459 @

wt.of 0.738 kg/mt), horizonteal Three track member size

92mm x 31.75mm x 1.30mm ( of jindal Section no :S688

@ wt 1.07 Kg/mt ) vertical member of size 92mm x

31.75mm x 1.50 ( of jindal Section no : 8933 %

wt.1.06.Kg/mt ) with sliding shutters of size 40mm x 18mm

x 1.29 mm (of jindal Section no : 8947 @ wt. of

Kg/mt) vertical member of size 40mm x 18mm x 1.29mm

(of jindal Section no : 8949 @ wt of 0456 Kg/mt/with 5 mm

thick transperent bronze colour tinted float glass with S.S

Jali in One member powder coated aluminum fitting and

fixtures and transparent silicon sealant glass fixing to

frame as per details etc.

5 Applying two coats of Birla or Asian acrylic lapy ( putty) & 562.00 Sqm 40.59

two coats of primer of approved brand and manufacture on

new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping

and other foreign matter and sand papered smooth.

6 Wall painting (two coats) with plastic emulsion paint of 562.00 Sqm 78.90

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

7 Distempering (Two coats) with oil bound distemper of 562.00 Sqm 79.86

approved brand and manufacture and of required shade

on wall surfaces to give an even shade, over and including

a priming coat with distemper primer of approved brand

and manufacture after thoroughly brushing the surface free

from mortar dropping and other foreign matter and also

including preparing the surface even and sand papered

smooth. Extra over Item 44,45 for distempering with oil

bound washable distemper on celling and sloping roofs.

8 Painting two coats (excluding priming coat) on new steel 21.00 Sqm 65.31

grill and other metal surface with synthetic enamel paint,

brushing to give an even shade including cleaning the

surface of all dirt, dust and other foreign matter.

9 Providing and fixing pillar tap, capstan head, screw down 16.00 Each 308.73

high pressure with screws, shanks and back nuts (i) 15mm

10 Providing and fixing screw down bib taps of following 16.00 Each 186.83

size.(A) Brass screw down bib tap polished bright (i) 15mm

11 Providing and fixing chromium plated brass half turn flush 16.00 Each 263.77

cock of approved quality including fixing in pipe line

etc. complete.(ii) 25mm dia.

12 Providing laying and jointing in true line and level 15mm 120.00 Rmt 72.65

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings make as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be conceited as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent,

including cost of all materials.

13 Repairing, Providing and fixing of Ridge flashing for roof 268.00 Sqm 858.67

panel shall be made out of 0.5 mm thick pre coated GI

sheet . The Precoated sheet shall be of minimum 240 mpa

steel grade confirming to IS 14246:1995 and shall have

zinc coating of minimum 120 gsm as per IS:277:1992 , 5-7

microns epoxy primer on both side of the sheet and

polyester top coat 15-18 micron. The PPGI Sheet shall

have plastic protective guard film of minimum 25 microns

to avoid scratches during transportation. The ridge shall

be fixed to the steel members by pop rivet or self

drilling/self stitching fastners (Si maximum 450 mm c/c

along length of capping/flashing etc complete.

14 Steel work, welded in built up sections framed 11.00 Qntl 9047.86

work including cutting, hoisting, fixing in position and

applying a priming coat of read lead paint. (A)In beams

and joists, channels angles Tees, flats, with connecting

plates or angle cleats as in main and cross beams. Hip

and jack rafters, purlins connected to common rafters and

the like (more than 10 ton).

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

15 Providing and laying cement concrete work 1:2:4 3.00 Cum 3835.96

(1-Cement : 2- Coarse sand : 4- graded stone aggregates

20 mm nominal size) and curing complete excluding cost

of formwork and reinforcement for reinforced concrete

work in (D) Columns, Pillars posts and struts upto floor

i.e. Rs. Four Lakh ninety nine thousand twenty two and paise eighty one only.

I/We am/are willing to carry out the work @ ______________ % above/below percent

(Should be written in figures and words) of the estimated rate mentioned above. Amount of

my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.

G.R.: PRC-10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in

R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned in

all the tender.

5. 1% testing charges should be paid by the contractor.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by

me and found order.

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

City (R & B) Sub Division Bharuch (R & B) Division Bharuch (R & B) Division,

Bharuch Bharuch Bharuch