PROVN OF TECH STORE 20FT X 40 FT WITH STORAGE SHELVES AND LIGHTING CONDUCTOR AND OTHER SR/MINOR WORKS AT NAA UNDER GE (N) TEZPUR

Amount

Note 1: (Applicable for all parts/items) : The biidders/contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep geeting out in soft/loose soil.

Excavating in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth; for foundation, etc. and getting out in soft/loose soil complete in all respect as specified and directed

M&L for PCC (1:4:8) type D2 (using 40mm crushed and graded stone aggregate) as in foundaion and mass filling complete in all respect as specified and directed

Providing and laying for reinforced cement concrete type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; complete in all respect as specifified and directed.

Providing and laying for reinforced cement concrete type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) in columns, posts, struts etc. complete in all respect as specifified and directed.

Providing and laying for reinforced cement concrete type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) in beams, lintels, etc.; complete in all respect as specifified and directed.

Providing and laying for reinforced cement concrete type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like ; complete in all respect as specifified and directed.

M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter in rough finished flat surface of concrete complete in all respect as specifified and directed.

M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions in rough finished flat surface of concrete complete in all respect as specifified and directed.

M & L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. in rough finished flat surface of concrete complete in all respect as specifified and directed.

M & L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc. 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work in rough finished flat surface of concrete complete in all respect as specifified and directed.

M & L for deformed TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete in all respect as specifified and directed.

M & L for deformed TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete in all respect as specifified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, tubular/hollow section, channel or flat sections) including distance pieces, cleats etc. using FE-410W (Grade E-250 quality "A") complete all as specified and directed.

S&F plate girder or single stanchions, built up of one beam or channel section with flange plates, caps bases, splices, agnle brackets cleats and other connection confirming to Fe-410-W (Gde-E-250) quality-A complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. Note-The measurement shall be carried out as in plain

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in eves covering or of similar type, fixed with self tapping screws including necessary mild steel flats and screws for fixing with framed structure complete all as specified and directed.

Supply and Fix exposed GI powder coated snap grid frame work for false ceiling in flat or in sloping , of grid size 600x600mm comprising of wall/cleat angle of size 25x25x0.35mm and cross tee of size 24x38x0.70mm with 4mm dia GI wire as suspender and including 4mm thick decorative pre -painted non asbestos board (E-Board) in false ceiling including fixing arrangement from steel/wooden truss of any type including dismantalling of existing false ceiling complete all as specified and directed. (Make: Eternit, Everest or equivalent)

S&F coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,in vertical surfaces such as skirting/dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour complete all as specified and directed.

Spreading and levelling to under flooring, in layers n. exc. 25 cm thick and well ramming including watering as required of excavated loose soil, as retreived against respective excavation item complete in all respect as specifified and directed.

Providing and laying 40mm thick damp proof course to horizontal or vertical surfaces including necessary formwork using type B-0, 1:2:4 concrete (using 12.5mm nominal size crushed and graded stone aggregate) mixed with water proofing compound complete in all respect as specifified and directed. (Water proofing compound shall be measured & paid separately under supply only item)

Providing and laying 75mm thick cement concrete type C-2, 1:3:6 (using 40mm nominal size crushed and graded stone aggregate) and finished even and fair in base concrete complete in all respect as specifified and directed.

M&L for 18-20mm thick machine cut kota stone slab flooring of size not less than 500X500mm over 20mm thick cement mortar (1:6) cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L for 18-20mm thick machine cut kota stone slab of size not less than 500X500mm in riser of steps, skirting , dado and pillar over 15mm thick cement mortar (1:4) cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L brick work with sub-class "B" old size bricks of class designation 75, straight or curved on plan exc. 6m mean radius built in CM (1:6) complete in all respect as specified and directed.

M & L for half brick work with old size sub- class ‘B’ bricks of CD 75, straight or curved on plan exc. 6m mean radius, built in cement mortar 1:4 complete in all respect as specifified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete in all respect as specified and directed.

Removing excavated material n. exc. 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete in all respect as specified and directed.

M & L 15mm thick plastering on brick/stone/concrete surafces of wall in cement mortar (1:4) finished even and smooth without using extra cement complete in all respect as specifified and directed.

M & L 15mm thick plastering on brick/stone/concrete surafces of wall in cement mortar (1:6) finished even and smooth without using extra cement complete in all respect as specifified and directed.

M & L 10mm thick plastering on brick/stone/concrete surafces of ceiling in cement mortar (1:3) finished even and smooth without using extra cement complete in all respect as specifified and directed.

Supply only water proofing compound complete in all respect as specifified and directed.

M & L for Broken stone or boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete in all respect as specified and directed

S & F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; and similar work conforming to Fe. 290, Gde-E-165 complete in all respect as specifified and directed.

M & L for mild steel iron frame for door , window using joist, channel, angle, tee, tubes, flat sections, fixed independently, without connecting plates, etc. conforming to Fe. 290., Gde-E-165 complete in all respect as specifified and directed.(MS hinge shall be paid under supply only item)

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges steel peg stay complete all as specifid and directed.

S & F 4mm sheet glass, ordinary quality and glazing with oil putty(if required) in square n. exc 0.5 Sqm in each pane complete in all respect as specifified and directed.

M & L for preparation of new plastered surface of wall and applying two coats of weather coat over two coat of home shield over 3mm thick (in two layers), wall care putty over a coat of primer complete in all respect as specifified and directed.

M&L for preparation of newly undecorated plastered surface of wall and applying two coats of oil bound distemper finished with spunge roller over a coat of alkali resistant priming paint over 3mm thick (in two layers), wall care putty complete in all respect as specifified and directed.

M&L for Preparation of undecorated plastered or unplastered surface of ceiling and applying two coats of white wash complete all as specified and directed.

S & F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete in all respect as specified and directed.

S &F aluminium anodised sliding door bolts with hasp and staple (bolt type) 12mm dia bolt 250mm long, with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete in all respect as specified and directed.

Supply and fixed 100mm size of butt hinges medium weight, cold rolled mild steel complete in all respect as specified and directed.

S&F Aluminium handle cast type anodised 150 mm size complete in all respect as specified and directed.

S & F aluminium anodised, barrel tower bolts of extruded section and fixed 200mm size complete in all respect as specified and directed.

M & L for writing letters or figures (block roman, Italic or Indian) through synthetic enamel paint of 30cm high upto 12m height building over square or round base painting and necessary scafolding arrangement complete in all respect as specified and directed.

Providing and laying for cement concrete in coping, hold fasts using type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) or of similar work, etc. including necessary form work complete in all respect as specifified and directed.

M&L for preparation of new undecorated painted wooden surface of any description not otherwise described,over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for preparation of new undecorated painted steel surface of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete in all respect as specified and directed.

Demolition of Cement concrete (unreinforced) not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

Material and labour for Dark shade Vitrified Ceramic tiles 10mm thick (Square / rectangular ) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for screed bed or bedding layer of mortar 15 mm thick in CM 1:4, for laying floor finishes complete in all respect as specified and directed.

Material and labour for preparation of new undecorated painted steel surface of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete in all respect as specified and directed.

M&L for sand filling under floor or below paver blocks incl. watering and consolidation complete in all respect as specified and directed.

M & L for grey cement with pigment coloured glazed Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete in all respect as specified and directed.

M & L for grey cement with pigment coloured glazed Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade complete in all respect as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C2 (using 40mm crushed and graded stone aggregate) as in plinth protection and finished surface even and smooth without using extra cement including necessary expansion joint and filling compound in it complete in all respect as specifified and directed.

Material and labour for preparation of newly undecorated plastered surface of wall and applying three coats of cement based paint over one coat of alkali resistant priming paint including filling of voids/surface with wall care putty on plastered surface complete in all respect as specified and directed.

Dismantling asbestos cement sheet, metal/non-metal ridge (corrugated, semicorrugated, plain etc.) in roof covering, wall etc. or of similar types complete in all respect as specified and directed.

S & F coloured 0.50mm thick pre- painted galvalume aluminium zinc coating GI based trapezoid profile steel sheet having tensile strength of 550 Mpa as in ridge, valley gutter or of similar type, fixed with self tapping screws alongwith bitumen washer complete in all respect as specifified and directed.

Dismantling of timber scanttlings 40 Sqcm & over in section, in any position for framed work complete in all respect as specifified and directed.

S&F 2nd class Hard wood scanttlings, wrought in any position for framed work including jointing wirh nails, screws, nut bolt etc. and necessary supports to existing truss complete all as specified and directed.

Supply and Fix exposed GI powder coated snap grid frame work for false ceiling in flat or in sloping , of grid size 600x600mm comprising of wall/cleat angle of size 25x25x0.35mm and cross tee of size 24x38x0.70mm with 2mm dia GI wire as suspender and including 3.5-4mm thick decorative, pre -painted, non asbestos board (E-Board) in false ceiling including fixing arrangement from steel/wooden truss of any type including dismantaling of existing false ceiling complete in all respect as specified and directed (Make: Eternit, Everest or equivalent)

Taking down and demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete in all respect as specified and directed.

Material and labour for 15mm thick plastering on brick/stone/concrete surafces of wall in CM (1:6) finished even and smooth without using extra cement on other side of lathing complete in all respect as specified and directed.

Material and labour for 15mm thick plastering on brick/stone/concrete surafces of wall in CM (1:4) finished even and smooth without using extra cement on fair side of lathing complete in all respect as specified and directed.

S & F GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste

Taking down cement plaster of any thickness and description on brick/concrete/stone walls, ceilings, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete in all respect as specifified and directed.

Supply only water proofing compound complete, in all respect as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Providing and laying coloured Vitrified tiles (square/ rectangular) area of each tile not exceeding 0.36 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white cement with pigment to match the tile colour over 15mm thick screed bed in cement mortar (1:4) complete in all respect as specifified and directed.

Providing and laying coloured Vitrified tiles (square/ rectangular) area of each tile not exceeding 0.36 Sqm in skirting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour over 10mm thick rendering in cement mortar (1:4) complete in all respect as specifified and directed.

Providing and laying coloured ceramic tiles (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white cement with pigment to match the tile colour over 15mm thick screed bed in cement mortar (1:4) complete in all respect as specifified and directed.

Demolition of cement concrete (unreinforced) in ground floors of any description (below or above ground level) complete in all respect as specified and directed.

Providing and laying plinth protection of 75mm thick cement concrete, using type C-1, (1:3:6) (using 20mm nominal size crushed and graded stone aggregate), laid in alternate penals/bays and finished the surafce even and smooth without using extra cement complete in all respect as specifified and directed.

S & F for coloured glazed pre coated chequered cement concrete tiles of any shape and size, 20-25mm thick with grey cement with pigment,; set jointed and pointed in neat cement slurry with pigment in floors including over 15mm thick screed bed in CM 1:4 and dismantalling of existing tiling with screed bedding complete in all respect as specified and directed.

Taking down chowkhats or frames with shutters without taking off shutters from the frames not exceeding 1.5 Sqm each complete in all respect as specifified and directed.

Taking down chowkhats or frames with shutters without taking off shutters from the frames exceeding 1.5 Sqm & not exceeding 4Sqm each complete in all respect as specifified and directed.

S & F second class HW plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete in all respect as specified and directed

Supplied and fixed 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete in all respect as specified and directed.

S & F 30mm thick glazed and skeleton in 2nd class hardwood with sash bars for window,ventilators as per SSR Part I , section 8 clause 8.24(b) complete in all respect as specified and directed

S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixing with beads in door/window/ventilator/fixed glazing shutters complete in all respect as specified and directed

Supplied and fixed in the frame at site, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification & drawing complete in all respect as specified and directed.

Supplied and fixed in opening, solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, as per specification & drawing complete in all respect as specified and directed.

Supply and fixed 75mm size stainless steel butt hinge complete in all respect as specified and directed.

Supplied and fixed 125mm length of bolt, Aluminium anodised, barrel tower bolt of extruded section and fixed complete in all respect as specified and directed.

Supplied and fixed 125 mm size, Aluminium handle cast type anodised complete in all respect as specified and directed.

S & F aluminium anodised sliding door bolts with hasp and staple (boil type) 12mm dia bolt 300 mm long complete in all respect as specified and directed

S & F powder coated aluminium sliding windows shutters without sash bars, aluminium sections weighing (side and top section not less than @ 0.634Kg/m, bottom @ 0.606 Kg/m, locking section @ 0.734 Kg/m) including necessary jointing cleats, galzing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings like locking arrangments and suitable handles for sliding purpose, 4mm thick plain glass and stainless steel wire mesh of dia 0.36mm and average width of aperature 1.40mm, wheels etc. including three track anodized aluminium frame complete in all respect as specified and directed.

S & F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. or for window grill of appd size and shapeincluding fixing with aluminium "U" shape section for fixing etc. complete in all respect as specified and directed. (Powder coating shall be min 50micron) (Note: all external members to be joined at 45 degree angle at corner)

S7 F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S & F aluminium (extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S&F 5.5 mm thick plain glass, and glazing with oil putty in square n.exc 0.5 sqm in each pane, complete in all respect as specified and directed.

S&F in repair wash hand basins (WHB), vitreous china of size 550x400 mm (flat back or angle back type), including cutting for and pinning in ends of brackets over new angle iron erecting stand embedded in PCC (1:2:4) block including 32 mm dia bore waste fittings cast copper alloy chromium plated with long screwed shanks and flynuts flange and beded in redlead cement, PVC waste pipe including 15 mm bore dia fancy type CP finish pillar tap, cast copper alloy with capstand heads, screw down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts, screw for iron pipes complete in all respect as specified and directed.

Supply and fixed in repairs vitreous china wash down water closet Pan (pedastal pattern) white including plastic water closet seat, white, closed pattern with flat bottom, new CI/UPVC/PVC, 'P' or 'S' type trap and mild steel chromium plated hinging device (exclusive flushing cistern and flush pipe) complete in all respect as specified and directed.

S&F 75 mm dia of outlet, PVC (SWR) nahani trap, plain with SS grating of size 150mmX150mm, 0.75mm thick openable at center including jointing with solvent cement, complete in all respect as specified and directed.

S & F in repair PVC valveless, syphonic action type, low level dual flush cistern, 10 liter capacity , white, with inlet ball valve, float and handle including brackets for fixing & flush pipe of polyethylene of required length complete in all respect as specified and directed.

S & F in repairs 15 mm bore fancy type CP finished angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repairs long body bib taps of 15mm bore, fancy type CP finish cast copper alloy with crutch handle screwed down for iron pipes complete in all respect as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, PVC, AC or Reinforced concrete) set in cement mortar of upto 110mm dia

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm bore including necessary MS pipe clamp, complete in all respect as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75mm bore including necessary MS pipe clamp, complete in all respect as specified and directed.

S&F PVC (SWR) pipes single sockedted in any length with rubber ring joints laying in trenches 110 mm bore, complete in all respect as specified and directed.

S&F PVC (SWR) pipes single sockedted in any length with rubber ring joints laying in trenches 75 mm bore, complete in all respect as specified and directed.

S&F PVC (SWR) bends with access door of any radius 110 mm bore, complete in all respect as specified and directed.

S&F PVC (SWR) bends with access door of any radius 75 mm bore, complete in all respect as specified and directed.

S&F PVC (SWR) single (single 'T') equal or unequal 110mm bore pipe with access door, complete in all respect as specified and directed.

S&F PVC (SWR) single (single 'T') equal or unequal 75mm bore pipe with access door, complete in all respect as specified and directed.

S&F 15mm bore of tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down including necessary cutting, chauging etc. complete in all respect as specified and directed.

S&F 20 mm bore of tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down including necessary cutting, chauging etc. complete in all respect as specified and directed.

Supply and fixed Joist, flats, beams, channel, angle, hollow steel tubes or tee sections, fixed vertically independently connecting plates, etc. using Fe 410 -W (Gde- E- 250) quality-A for wind tie, door chowkhats etc., complete in all respect as specified and directed.

Material and labour for preparation of old wooden surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as directed and specified.

Material and labour for preparation of old or new wooden surfaces of any description not otherwise described, over 10cm width or girth and treated with two coats of creosote oil complete all as directed and specified.

Material and labour for preparation of old painted steel surface of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint complete in all respect as specified and directed.

Material and labour for complete removal of old decorated plastered surface of wall and applying two coats of cement based paint over one coat of alkali resistant priming paint complete in all respect as specified and directed.

Material and labour for preparation of newly undecorated plastered surface of wall and applying two coats of cement based paint over one coat of alkali resistant priming paint complete in all respect as specified and directed.

Preparaing old decorated plastered or unplastered surface of wall and apply two coats of white wash including scrapping down of existing treatment complete in all respect as specified and directed.

Preparaing new un- decorated plastered or unplastered surface of wall and apply two coats of white wash complete in all respect as specified and directed.

Providing and laying for reinforced cement concrete type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) in Chajja etc.; complete in all respect as specifified and directed.

S & F in repair of full stall size Vitreous China urinals, full stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including 40mm PVC waste pipe and 40mm dia CP copper alloy waste fitting fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe

S&F PVC (SWR) vent cowl 110 mm dia bore, complete in all respect as specified and directed.

S&F PVC (SWR) vent cowl 75 mm dia bore, complete in all respect as specified and directed.

E/M Portion

.Air termination single pointed ,copper rod 12 mm dia and 300mm long including necessary fixing arrangement using MS clamps ,nuts & bolts complete all as directed and specified.

M & L for base plate for air termination of size 85 x 85 x 20 mm (Suitable size at site) with hole drilled and threaded at centre suitable for insertion of 12 mm dia air termination rod, suitable grouted at the roof of building with 4 No foundation bolts & fixing arrengement complete all as per specified & directed at site.

S & F test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 Nos 9 mm dia 25 mm long hex head screw.

S & F Thermoplastic junction box of size 155 mm x 210 mm x 92 mm , IP 66 , for test point terminal box , halogen free and weather proof with locking arrangement and necessary mounting arrangement on wall with MS clamp , nut , bolt ,washer , for out door installation complete complete all as specified and directed . Make:- Hensel Cat No-KF1600H or equivelent in Sintex / C&S as approved by GE.

M & L for earth continuity conductor or main earthing lead including insulator fixed to wall/roof or batten or recess or chases or buried in ground or drawn in conduit pipe or fixed to poles or any other indicated situation for loop earthing etc as required 20 x 3 mm copper strip complete all as specified

M&L earthing complete with copper earth plate electrode 600mm x 600mm x 3.15 mm thick burried directr in ground (Earth pit not less than 3.25 m deep below ground level) with top edge of the plate not less than 2.5 m below ground level connected to copper strip 20 X 3 mm as earth lead by means of bolts nuts, check nuts and washers of glavanised iron and as shown in electrical plate No 3 connected to earth test point including necessary excavation any type of soil, RCC chamber cover plate, wire mess, funnel, test point, 50 mm dia GI protection pipe medium grade and watering etc complete and testing on completion. The electrode and lead shall be of copper all as specified and directed by Engr-in-charge (Copper strip upto 7.5 RM will be included in the item rate and copper strip beyond 7.5 RM will be measured seperately.

Material and labour for sand cushioning with a layer of sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches for protection of cables complete all as specified and directed.

M & L for point wiring with 1.5 Sqmm multi stranded copper conductor 1100 V grade, ISI marked , PVC insulated unsheathed cable (with approved colour code) FRLS cable drawn in & including PVC casing caping of 25 mm wide, with double locking type, including all accessories casing caping as approved by EIC, with PVC 1.5 mm multi stranded insulated unsheathed copper wire, ISI marked of green colour for continous earth, PVC terminal box and PVC board making good disturbed surface to match with the existing surface light/fan/exhaust fan/bell point complete all as specified and directed.

All as per item No. 133 here-in- before but for 3 pin 5 Amps switch socket combination on independent board with 1.5 sq mm copper cable.

All as per item No. 133 here-in- before but for 3 pin 15 Amps switch socket combination on independent board with 2.5 sq mm copper cable

All as per item No. 133 here - in - before but for 5 Amps socket point on the same board controlled by one switch.

S&F socket out let only, 5 pin 5 Amps flush type controlled by another 5 Amps switch.

M&L for sheet metal double door enclosure MCB DBs TPN 4 way 415 V, complete flush mounted all as specified and as directed.

M&L for Isolator/MCB single pole 6 to 32 Amps, 240 volts complete all as specified and directed.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 450 mm sweep , 1440 rpm with louver including making suitable hole in wall for fixing complete all as specified and directed.

Supply & fix ceiling fan 230 volts AC , 50 Hz single phase 1200 mm sweep with suitable fixing arrangement at site complete all as specified and directed.

Supply and fixing LED luminaires, 20 watts, lumen output not lessthan 2000 (4 feet), made of anodised extruded aluminium housng, wit high transmissivity diffuser, high lumen output, with suitable electronic driver, and operated in single phase, 230 volts, 50HZ, all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable of size 23/0.0076, from conector and ceiling rose, complete all as specified and directed.

Supply & Fix LED wall security lights 25W with necessary brackets (made out of suitable size of GI pipe light grade appx 0.6 meter long bend to shape)clamp , nuts, bolts, etc fixed on walls complete all as specified and directed.

Taking down carefully aluminium / copper point wiring for one light , fan, socket power point or buzzer controlled by one switch complete including fitting / fixtures such as switches, ceiling roses, holder, socket, light fitting etc; and making good disturbed surfaces of walls, ceilings etc all as specified.

Taking down old burnt/unserviceable main switches and DB's including MCB SP/SPN/TPN of any make and any size, wooden board, junction box and making good distrubed surfaces of wall all as directed.

M & L for point wiring with 1.5 Sqmm multi stranded copper conductor 1100 V grade, ISI marked , PVC insulated unsheathed cable (with approved colour code) FRLS cable drawn in & including PVC casing caping of 25 mm wide, with double locking type, including all accessories casing caping as approved , with PVC 1.5 mm multi stranded insulated unsheathed copper wire, ISI marked of green colour for continous earth, PVC terminal box and PVC board making good disturbed surface to match with the existing surface for light/fan/exhaust fan/bell point complete all as directed

All as per item 143 above but for 5/6 Amps Socket point on independent board with 1.5 sq mm copper cable & 1.5 sqmm earth cable complete all as specified and directed.

All as per item 143 above but for 15/16 Amps Socket point on independent board with 2.5 sq mm copper cable & 2.5 sqmm earth cablecomplete all as specified and directed.

All as per item 143 above but for 15/16 Amps Socket point on independent board with 4 sq mm copper cable & 4 sqmm earth cable complete all as specified and directed.

M&L for switch piano (flush button type) single pole, one way, 5 Amps complete all as specified and directed.

M&L for switch socket combination 2 in one, 5/6 Amps 240 volts flush type complete all as specified and directed.

M&L for switch socket combination 2 in one, 6 pin 6 Amps and 16 Amps flush type complete all as specified and directed.

S&F bell ding dong type,AC, 230 volts, single pole on PVC box : Make : Anchor / L& T/ Havells

S&F bell push switch flush type SP 5 Amp : Make : Anchor / L& T/ Havells

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps 10 KA 'C' Curve complete all as specifed and directed.

S & F step type electronic fan regulator 120 watt complete all as specified

S&F ceiling rose Polycarbonate type two to three terminals complete all as specified and directed.

Supply and fixing lamp holder , PVC/Poly carbonate type with back plate suitable for batten fittings to be fixed on PVC box including supply and fixing 11 watt LED lamp complete all as specified and directed.

S&F sheet metal enclosure for MCB DB VTPN 6 way , double door with 63 Amp , IP 54 metal door, 25 KA,TPN MCCB complete all as directed.

M&L for Isolator/MCB TPN 63 Amps, 415 volts complete all as specified and directed.

M&L for Isolator/MCB single pole 5 to 40 Amps, 240 volts complete all as specified and directed.

M&L for Isolator/MCB DP 32/40 Amps, 240 volts complete all as specified and directed.

Taking down Ceiling fan any type/size from hook and dismantling cable and blades and bring out side workshop for repair and hanging ceiling fan in position after winding , minor repair , greasing etc. complete all as specified and directed.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louve complete all as specified and directed.

Supply and fixing LED 20 watts tube light fitting, lumen output not lessthan 2000 (4 feet), made of anodised extruded aluminium housng, wit high transmissivity diffuser, high lumen output, with suitable electronic driver, and operated in single phase, 230 volts, 50HZ, all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable of size 23/0.0076, from conector and ceiling rose, complete all as specified and directed.

S&F in of Recess/surface mounted 2' x 2' LED flat light 36W luminaire with comfortable glare free soft illimination not less than 5700K complete all as specified and as directed

S&F of mirror light 10W luminaire with comfortable glare free soft illimination complete all as specified and as directed

Supply and Fixing LED street/ security light, made of pressure die-cast housing with toughned glass and induvidual high power LEDs with secondary optics, IP65 protection and impact resistance of IK07 with driver etc, of capacity 25 W LED and including suitable GI bracket & clamp its connection with 3 core 2.5 sqmm stranded PVC Insulated and PVC sheathed Al conductor wire from junction box to street light fitting or over head conductor complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metre below ground level) with top edge of the earth plate not less than 1.5 metre below ground level, connected to GI earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part I connected to earth test point all as specified including excavation and connected earth work, in soft/loose soil, removing soil upto 50m, PCC 1:3:6 type C1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 15mm bore GI medium grade earth lead protection pipe, 50mm thick RCC 1:2:4 type B1 cover slab of earth pit reinforced with 8 mm dia TMT Bars @ 10cm C/C both ways and with handle made out of 12mm dia bars, funnel, strainer, alternate layer of charcoal dust and common salt and testing on completion, complete all as specified and directed.

Supply, laying, jointing and testing LT cable in trenches or on poles/walls, XLPE insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm, 4 core complete all as specified and directed.

Excavation in trenches in any type of soil not exceeding 1.5 mtr wide and n.exe 1.5 mtr depth including getting out all as specified and directed.

Returning filling in including spreading, leveling ,and well ramming, in layers not exceeding 25 cm each layer of any kind of soil.

Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point.

M & L sand filling in-trenches with clean dry sand unwashed including gently pruning around cables complete all as specified.

M & L for horizontal boring up to 80 mm under roads for insertion of cable by manual drilling complete all as specified and directed.

Material and labour for fly ash brick laid flat in trenches over sand cushioning for cable protection complete all as specified and directed.

Supply & fixing GI Pipe light grade 40 mm dia, ISI marked, of required length for protection of cables complete including necessary MS clamps, nuts, bolts and washers etc fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Anil Kumar Sarmah

M/S Inder SINGH SABARWALL

M/S Barua Enterprise

North Eastern Builders

M/S Bharat Construction Co.

M/S Deep-Jeet

D G Corporation