PROVN OF SHED FOR STORAGE OF WMR BARRELS NEAR SUGAR SHED AT 43 COY ASC AND CERTAIN MINOR WORKS AT NCC DTE GUJARAT OFFICE COMPLEX UNDER AGE B/R-I UNDER GE (A) AHMEDABAD

Amount

Surface excavation n.exc 30 cm deep & averaging 15 cm deep and getting out in soft /loose soil complete all as specified and directed.

Excavating in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation etc or for shafts, wells,cesspits, man holes, pier holes etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft/ loose soil complete all as specified and directed.

M & L for cement concrete in foundations filling and mass concrete type D2 1:4:8 using 40mm graded aggregate complete all as specified and directed.

M&L for mild steel TMT bar 10 mm dia or above as in rainforcement cut to length bend to shape required and binding with and incl mild steel wire (annealed ) not less than 0.9 mm dia complete all as specified and directed.

All as per item No 4.00 above but 6 to 8mm dia.

M&L for Mild steel TMT bar 5mm dia and over upto and including 10mm dia as in stirrups incl bending and binding with and incl mild steel wire not less than 0.9 mm dia complete all as specified and directed.

M&L for use and waste for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; surface finished rough complete all as specified and directed.

M&L for use and waste for Formwork to sides of pillars, posts, struts, piers, columns and stanchions ,surface rough finished complete all as specified and directed.

M & L for providing reinforced cement concrete 1:1½:3 (Nominal Mix) type A-1, using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc complete all as specified and as directed

M & L for providing reinforced cement concrete 1:1½:3 (Nominal Mix) type A-1, using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts etc complete all as specified and as directed

Returning ,filling in ,including ,spreading , levelling , watering and well ramming in layers n, exc, 15 cm complete all as specified and directed.

Removing excavated material exc1.5 km and n.exc 5.0 KM depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and directed.

Spreading and levelling in layers n exc. 25 cm thick and well ramming including watering complete all as specified and directed.

M & L for brick work with sub class B bricks straight or curved on plan to any radius exc. 6 mtr mean radius in CM 1:6 complete all as specified and directed.

S&F mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F mild steel rolled section as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 290 GdeE-165 complete all as specified and directed.

S&F mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming Fe- 290 Gde -E-165 complete all as specified and directed.

S & F Mild steel screw bolts(machine made) of size 10 to 16 mm dia with hexagonal or square heads at one end and screwed the other, orscrewed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long complete all as specified and directed.

M&L Hard core of gauge n.exc 63mm deposited spread and leveled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100 mm thick plain cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of flooring complete all as specified and directed.

M&L for 150 mm thick plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate finished even and fair without using extra cement complete all as specified and directed.

M&L for Forming Construction joint 100mm deep x 10mm wide filled with sealing compound as specified and directed by Engr-in-Chage.

S&F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an green colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F of pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of green colour having tensile strength of 550 Mpa as in ridge, hips, vally gutters and fixed with self tapping screws complete all as specified and directed.

S&F of mild steel wind ties for roof covering including all necessary drilling, bolting or riveting self tapping screws , etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L rendering 15 mm thick in CM (1:4) on brick work or concrete surfaces mixed with water proofing compound incl chajja, facia etc, finished the surfaces even and smooth without using extra cement complete all as specified.( WPC measured separately)

M&L 15mm thick rendering in cement mortar 1:6 on other than fair face of brick work or concrete surface complete all as specified and directed.

Supply only Integral waterproofing compound as specified.

M&L for new plastered surfaces of walls and applying two coats of cement based paint on over one coat of primer on walls complete all as specified and directed by the Engr-in-Charge

M&L for preparation of new plastered surface and applying three coats of white wash on walls complete all as specified and directed.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for PCC 1:3:6 type C1-(using 20mm graded stone aggregate) as in coping including necessary form work complete all as specified and directed.

M&L, RCC in 1:2:4 type B1 (20 mm graded aggregate) for slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slab and in shelves and the like etc all as specified and as directed by Engineer-in-Charge

M & L for providing reinforced cement concrete 1:1½:3 (Nominal Mix) type A-1, using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed

M&L, flat fair finished surfaces form work to soffits of suspended slab such as roof slabs, floors slabs, landing & similar work not exceeding 200 mm thick (Horizontal or sloping) etc complete all as specified and directed by Engineer-in-Charge

M&L formwork to sides and soffits of floor or roof beams, beam haunch girders, bressummers,lintels, cantilevers, shelves including supports,overhangs etc. also splays between floors and beams, etc complete all as specified and directed.

M&L form work to edges of concrete flats, treads, breaks in floors, window cills, concrete raillings, opening in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specified and directed.

M&L, Brick work with fly ash sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. by Engineer-in-Charge

M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed by Engineer-in-Charge

M & L providing PCC 1:3:6, type C2 (using 40 mm graded aggregate), 75 mm thick, finishing cement concrete surfaces even and fair without using extra cement, as in plinth protection, path etc including necessary form work and provision of bituminous joints mixed with bitumen and sand at intervals not exc 3.00mtr complete all as specified and directed.

M&L for 40 mm thick DPC in cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

Removing excavated material n. exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base of flooring complete all as specified and directed.

M&L, Rendering 10 mm thick on fair faces of brick or concrete surfaces in CM 1:3 on ceilling finished even and smooth complete all as specified and directed by Engineer-in-Charge

M&L, Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 is to be finished even & smooth (without using extra cement) on wall complete all as specified and directed by Engineer-in-Charge

S&F factory made solid panel pvc door shutter 30 mm thick (Style) consisting of frame made out of M.S. frame shall be covered with heat moulded wood grain printed PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of printed sheet & 5 mm thick x 15 mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10 mm x 10 mm (90 degree) complete all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out or 5 mm wood grain printed PVC sheet reinforced with MS square tube & edges painted to match with printed sheet complete all as specified and directed.

S&F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm including necessary channel frame work, including rubber gasket and aluminium beading complete all as specified and directed.

S&F coloured plain/printed glazed tiles of size 300 x 450 x 7 mm, on vertical surfaces such as skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

S&F non skid coloured plain/printed glazed tiles of size 300 x 300 x 7 mm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L, applying 3 coats white washing on ceilling with preparing new plastered surfaces complete all as specified and directed by Engineer-in-Charge

M&L, applying 2 coats of cement paint over a coat of primer on wall & ceilling with preparing new plastered surfaces complete all as specified and directed by Engineer-in-Charge

S&F gun metal or gate valves with iron wheel head screwed both ends for iron pipe and fixed to 20 mm dia complete all as specified and directed.

S&F Ball brass valves, high pressure with polyethylene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to 20 mm dia pipe complete all as specified and directed.

Supplied and fixed stop valve 15 mm dia cast copper alloy CP fancy type with long shank and cup (concealed type) screwed down high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed

S&F, 32 mm dia low density polyethylene (LDPE) pipes of prerssure rating 6 Kgf/Sq cm complete all as specified and directed

S&F 10 litre capacity PVC valveless syphonic action type flushing cistern, low level white with inlet ball valve float and handle including brackets complete all as specified and directed

Supplied and fixed vitreous chinaware EWC padestal type closet with white seat and cover with flat bottom with hinging device complete all as specified and directed

S&F in repair brass CP shower rose 125 mm size with or without swivel joint and fixing to steel pipe complete all as specified and directed

S&F health faucet spray type brass, chromium plated, and 1.5 m long PVC flexible pipe complete all as specified and directed.

S&F, Vitreous China wash basin, white, flat back of size 550 x 400 mm including CI brackets, waste coupling ,waste pipe of 32 mm dia low density polythelene (LDPE) pipes of pressure rating 4 Kgf/Sq cm, brass CP pillar tap 15mm screwed down high pressure , PTMT bottle trap, pvc supply pipe 15mm from stop valve etc complete all as specified & as directed

S&F vitreous china urinal bowl type ( back or corner wall type and fixing plugs beeding urinal against wall in cement mortar 1:2 secure plugs with and 60mm long brass screws, pointing arround urinal back in cement and with grating and union for discharge pipe complete all as specified and directed

S&F GI water tubes of bore 15 mm dia tubes medium grade with all fittings and fixed to walls and ceilling or laid in floors complete all as specified and directed

S&F GI water tubes of bore 20 mm dia tubes medium grade with all fittings and fixed to walls and ceilling or laid in floors complete all as specified and directed

Supplied and fixed CP bib taps cast copper alloy fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed

Supplied and fixed CP Pillar taps cast copper alloy fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed

Supplied and fixed brass chromium plated tubular towel rail, 20 mm dia, D type 60 cm long between flanges complete all as specified and directed

S&F 200 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) complete all as specified and directed

S&F 150 mm long, extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed

S&F PVC connections 600 mm long, 15 mm size with PTMT nuts complete all as specified and directed

S&F PVC (SWR) pipes 75 mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F PVC (SWR) pipe 110mm bore, single socketed in any length with rubber ring joints laid in bends or in floors complete all as specified and directed

All as per item No 73 above but fixed to wall

All as per item No 74 above fixed to wall

S&F PVC (SWR) bends any radius, 75 mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius but 110mm bore complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and directed.

S&F PVC (SWR) vent cowl, 110 mm dia complete all as specified and directed.

S&F 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F for Rotational moulded polyethylene water storage tank of 750 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I

S&F for Rotational moulded polyethylene water storage tank of 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I

M&L Reinforced concrete pipes, class NP2, 150mm dia laid and jointed complete with collars complete all as specified and directed.

S&F stainless steel butt hinges medium weight 100 mm long complete all as specified and directed

M&L Cement concrete 1:4:8 type D2 concrete bed to drain pipe of dia 150 mm including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm size graded stone aggregate as in benching of man holes including making drains and necessary form work finishing even and smooth with using extra cement complete all as specified and directed.

M&L PCC in 1:3:6 type C-1 using 20 mm graded stone aggregate as in coping including weathering round or chamfered and necessary form work required complete all as specified and directed by Engineer in charge

M & L Pre cast reinforced cement concrete 1:2:4 type B1 (Using 20mm graded stone aggregate) set in cement mortar 1:4 for man holes cover slab complete all as specified and directed by Engineer charge

S&F in repair soap dish of 1mm thick stainless steel box type fixed with screws of size 150mmx150mmx100mm complete all as specified and directed.

S&F mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening confirm to Fe-410-w or E -250 quality A... complete all as specified and directed.

S & F mild steel 75 mm Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed.

M&L for Plain, framed, panelled shutters (any number of panels), of 2nd class hardwood 35 mm thick with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed.

S & F anodised Aluminium alloy sections sliding windows with frames Series-C (20mm) and , 3 track sliding shutters duly fitted with neoprene beading, glazing clips, shutters with tinted glass 5mm thick and stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed.

M&L non-skid ceramic tiles 7 to 8 mm thick area of each tile exc 0.18 sqm but not exc 0.38 sqm as in floor set & jointed in neat cement slurry and pointed in white /coloured cement to match the tiles including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No 96 above but on vertical surfaces including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for applying two coats of oil bound distemper on newly plastered surfaces of wall over a coat of approved wall care putty 2mm thick and preparation of wall surfaces complete all as specified and directed.

Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators complete for the following :-

One light point controlled by one switch.

One fan point controlled by one switch.

One socket outlet 6 amp controlled by one switch on the same board with other switches.

One socket outlet 6 amp controlled by one switch on indepdendent board.

S&F angle holder, insulated polycabonate body with back plate complete all as specified and directed.

S&F switch piano flush button single pole one way 6 amp complete all as specified and directed.

S&F ceiling rose 6 amp, 3 plates polycarbonate body complete all as specified and directed.

S&F LED batten (1.2 m) made of Aluminium housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete. Make : Philips cat ref no. ENDURALED BATTEN " BN 108C LED 20S PSU CDL WH " or Havells Lumiline plus / Wipro / Crompton as approved.

S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired for connection with flexible multi stranded copper conductor cable as required all as per Philips cat ref no. WT202W LED6S CW PSU S1 PC or equivalent in Wipro or Crompton or Havells as approved complete all as specified and directed.

S&F MCB distribution board SPN, 240 volts, 4 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

Single pole 6 to 16 amp. Make - Legrand DX3 cat ref no. 408587 to 408592 or equivalent in Schneider or Hager as approved.

Double pole 32 amp. Make - Legrand DX3 cat ref no. 408636 or equivalent in Schneider or Hager as approved.

S&F air ventilation fan 250 mm in toilet in rectangular in shape, PVC body, white colour 230V including louber shutter complete all as specified and directed. Make : Bajaj / Havells / Crompton

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories of following nominal size 2x6 sqmm + 1x6 sqmm earth continuity conductor in 20 mm dia conduit.

S&F steel tubes light grade galvanised with all fittings fixed to walls / floors / poles / road crossing etc of 40 mm bore complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core complete. Make - Havells / Polycab / Finolex as approved.

M&L for sand filling in trenches with clean dry fine sand unwashed including gently punning around cables complete all as specified and directed.

Supplying and laying old size bricks, common burnt clay building bricks sub class 'B' designation 75 laid in trenches over sand for cable protection complete.

Cutting existing steel tubing for alterations or aditions of pipe size 40/50 mm bore and screwing complete all as specified and directed.

M&L for stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 20 mm bore complete all as specified and directed.

M&L for gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe 50 mm bore complete all as specified and directed.

Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting for one 16 amp socket outlet modular type for controlled by one switch on independent board complete.

S&F switch piano flush button single pole one way 16 amp complete.

S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete.

S&F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete.

S&F hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up complete.

nirman construction

Shree Krushna Supply Corporation

yesh construction