REPAIR/CANNING/POLISHING OF WOODEN FURNITURE HELD AT RAIWALA MIL STN.

Amount

Removing old worn-out unserviceable cane plastic and M&L for recanning of following chairs complete with and including 2mm wide half round white plastic cane superior quality with Godrej pattern complete all as specified and including polishing complete to match with existing parts after finishing complete. (FD-225,FD-229,FD-250,FD-279,FD-280,FD-244,FD-382) (a) Chair dining (b) Chair easy (c) Chair writing (d) Chair CBA Spl with hand rest

CHAIR DINING (FD-279) M&L for replacement of the following existing old/broken/unserviceable parts of chair dining with & including new parts of Ist class hard wood (Shisham) made to shape as per drgs including polishing complete to match with existing parts after finishing complete all as specified and directed. a) Front legs

b) Rear legs

c) Front /Rear rails

d) Side Rails

e) Stiffeners bearer.

CHAIR EASY (FD-229) M&L for replacement of the following existing old/broken/unserviceable parts of chair easy from with & including new parts of Ist class hard wood (Shisham) made to shape as per drgs including polishing complete to match with existing parts after finishing complete all as specified & directed and shown on drgs.a) Front legs

b) Rear legs

c) Side rails

d) Arms

CHAIR WRITING (FD-280) M&L For Replacement of the following existing old/broken/unserviceable parts of chair writing from with & including new parts of Ist class hard wood (Shisham) made to shape as per drawings including polishing complete to match with existing parts after finishing complete all specified and directed and shown on drgs a) Front legs

b) Rear legs

c) Front/Rear Rails

d) Side rails

e) Arms

f) Stiffner

CHAIR VARANDAH (FD-280) Removing old worn-out unserviceable cane plastic complete and provide one coat white synthetic enamel paint and M&L for recanning of chair verandah (seat & back) complete with & including 4mm wide half round white plastic cane superior quality with mat pattern complete all as specified and directed. FD-359 & FD-259

Repair to Chair steel tubular with out Arms FD-75 (M) Removing of unserviceable seat and back of chair steel tubular without Arms, and provide of seat and back as per the existing size and wdn frame duly coated with premier black paint over the coat of wood primer and canned with 2mm wide half round white plastic cane superior quality with Godrej pattern complete all as specified.Supply and fixing on new seat and back with suitable machine screws. a) Seat for chair duly canned

b) Back for chair duly canned

c) Hard PVC shoes for chair with screw

Repair to Chair steel tubular with Arms - FD-75 (M) Removing of unserviceable seat and back of chair steel tubular with Arms, and provide of seat and back as per the existing size and wdn frame duly coated with premier black paint over the coat of wood primer and canned with 2mm wide half round white plastic cane superior quality with Godrej pattern complete all as specified.Supply and fixing on new seat and back with suitable machine screws. a) Seat for chair duly canned

b) Back for chair duly canned

c) Hard wood Shisham Arms for chair

d) Hard PVC shoes for chair with screw

SCHOOL DESK TYPE-II & III (a) Removing of old unserviceable seat of desk type -III and supply and fixing of new one made out of pre-laminated particles board commercial 18mm thick of size 1020 x 250 mm covered with 4mm thick Shisham wood beading fixed with 38 x 8 mm steel screw, all around complete all as specified and directed.

b) Removing of old unserviceable back rest of desk type -III and supply and fixing of new one made out of pre-laminated particles board commercial 18mm thick of size 1020 x 200 mm covered with 4mm thick Shisham wood beading fixed with 38 x 8 mm steel screw, all around complete all as specified and directed.

c) Removing of old unserviceable slope top of desk type -III and supply and fixing of new one made out of pre-laminated particles board commercial 18mm thick of size 1020 x 310 mm covered with 4mm thick Shisham wood beading fixed with 38 x 8 mm steel screw, all around complete all as specified and directed.

d) Removing of old unserviceable slope top of desk type -III and supply and fixing of new one made out of pre-laminated particles board commercial 18mm thick of size 1020 x 160 mm covered with 4mm thick Shisham wood beading fixed with 38 x 8 mm steel screw, all around complete all as specified and directed.

e) Removing of old unserviceable horizantal bottom long rails seat and desk of desk type -III any description and supply and fixing of new 25 mm dia MS square tube 18 gauge 800mm long all as shown in drawing and as directed by Eingineer-in-Charge.

f) Removing of old unserviceable bottom long rails seat and desk of desk type -III any description and supply and fixing of new 25 mm dia MS square tube 18 gauge 900mm long all as shown in drawing and as directed by Eingineer-in-Charge.

g) Removing of old unserviceable stiffner in table of desk type -III any description and supply and fixing of new 25 mm dia MS square tube 18 gauge 380mm long all as shown in drawing and as directed by Eingineer-in-Charge.

h) Removing of old unserviceable legs in bench of desk type -III any description and supply and fixing of new 25 mm dia MS square tube 18 gauge 730mm long all as shown in drawing and as directed by Eingineer-in-Charge.

j) Removing of old unserviceable legs seat of desk type -III any description and supply and fixing of new 25 mm dia MS square tube 18 gauge 150mm long all as shown in drawing and as directed by Eingineer-in-Charge.

a) Removing of old unserviceable seat of desk type -II and supply and fixing of new one made out of pre-laminated particles board commercial 18mm thick of size 1210 x 260 mm covered with 4mm thick Shisham wood beading fixed with 38 x 8 mm steel screw, all around complete all as specified and directed.

b) Removing of old unserviceable back rest of desk type -II and supply and fixing of new one made out of pre-laminated particles board commercial 18mm thick of size 1210 x 200 mm covered with 4mm thick Shisham wood beading fixed with 38 x 8 mm steel screw, all around complete all as specified and directed.

c) Removing of old unserviceable slope top of desk type -II and supply and fixing of new one made out of pre-laminated particles board commercial 18mm thick of size 1020 x 310 mm covered with 4mm thick Shisham wood beading fixed with 38 x 8 mm steel screw, all around complete all as specified and directed.

d) Removing of old unserviceable slope top of desk type -II and supply and fixing of new one made out of pre-laminated particles board commercial 18mm thick of size 1020 x 150 mm covered with 4mm thick Shisham wood beading fixed with 38 x 8 mm steel screw, all around complete all as specified and directed.

e) Removing of old unserviceable planks under of desk type -II and supply and fixing of new one made out of pre-laminated particles board commercial 18mm thick of size 1110 x 260 mm covered with 4mm thick Shisham wood beading fixed with 38 x 8 mm steel screw, all around complete all as specified and directed.

f) Removing of old unserviceable horizantal bottom long rails seat and desk of desk type -II any description and supply and fixing of new 25 mm dia MS square tube 18 gauge 850mm long all as shown in drawing and as directed by Eingineer-in-Charge.

g) Removing of old unserviceable bottom long rails seat and desk of desk type -II any description and supply and fixing of new 25 mm dia MS square tube 18 gauge 1100mm long all as shown in drawing and as directed by Eingineer-in-Charge.

h) Removing of old unserviceable stiffner in table of desk type -II any description and supply and fixing of new 25 mm dia MS square tube 18 gauge 370mm long all as shown in drawing and as directed by Eingineer-in-Charge.

j) Removing of old unserviceable legs in bench of desk type -II any description and supply and fixing of new 25 mm dia MS square tube 18 gauge 820mm long all as shown in drawing and as directed by Eingineer-in-Charge.

k) Removing of old unserviceable legs seat of desk type -II any description and supply and fixing of new 25 mm dia MS square tube 18 gauge 195mm long all as shown in drawing and as directed by Eingineer-in-Charge.

SCHOOL DESK TYPE-II & III M&L for one coat of French polishing to old polished surface of the following articles of any description width or girth including cleaning and preparing the surface rubbing to smoothness with sand paper and dusting including prose in the wood shall be filled with putty/filled for the following articles, complete all as specified and directed (a) Chair Dining (FD-279)

(b) Chair Easy (FD-229)

(c) Chair Writing (FD-280)

M&L for one coat of Synthetic enamel paint (Ist quality) by mechanical sprayer to old steel painted surface complete (internally & externally) of the following steel articles of any description with width or girth including cleaning & preparing the surface rubbing to smoothness with sand paper and dusting complete all as specified and directed (a) Chair Verandah (FD-280)

(b) Chair CB Steel with arms (FD-75)

(c) Chair CB steel without arms(FD-75)

(d) Chair CBA Special with hand rest

(e) School Desk Type II

(f) School Desk Type III

CITIZEN FURNITURE INDUSTRIES

AMARJEET SINGH AND CO.