Item 3 Remaining Associated Works for Completion of Jodhpur Chaupati Sector 22 Near Ashok Udhyan Chaupasani Housing Board Jodhpur

Amount

Providing & Fixing of IP40 LED Surface/ Recessed / suspended mounting Mid power SMD type LED Light fixture made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non - yellowish diffuser for uniform light distribution. High efficiency with 2.5 KV internal/external surge protection BIS certified isolated driver having efficiency > 85% , with Short & Open circuit protection and in compliance to IEC standards (Integral with light fixture). System lumen efficacy of ≥ 120 lm/Watt ,THD < 10 % , p.f.≥0.95,CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate / Report from OEM shall be submitted. All as per pre approved by engineer in charge . foe additional technical parameters of product/ work, refer Annexure "A" attacheded with this BSR.

Recessed Mounting

36W LED light fixture 2'x2' with acrylic / prismatic front cover.

Providing & Fixing of IK07 IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum LM6/ ADC12 material with heat dissipation fins on housing with UV stabilized PC/Toughened Glass cover (UV stablzation report submitted for UV cover ) and secondary lens on each LED & should be SMD type . The System level Luminaire efficacy >=120 lm/ wt with High Power LEDs is to be used and potted driver must be potted & has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety ,Input Frequency 50Hz±3% Power Factor >0.95 driver Efficiency >85% ,THD(I) <10% Humidity 10% to 90% RH Working Temp -5C to 45C . driver current <1000mA shown in LM79 report. The luminaire shall be BIS certified and T.C. certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened ,color Rendering Index >70 and CCT 5700K+355K. Surge protection shall be min ≥ 4 KV internal and min 10 KV external. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced. OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A"attached with this BSR .

120 watt LED Street Light fixture

Providing and installation Water Chiller unit of make SKODA and equivalent with 500 ltr tank capacity and 400-500 LPH Cooling Capacity, complete in all respect as per standard specification.

Providing and installation R.O. Plant of make Innoteck/Lubi of 1 HP Power and capacity of discharge 2 cum per Hour including multi-grade media filter, activated carbon filter and micron filter as per standard specification including High pressure pump of 2 HP, R.O. Stream and interconnecting pipe etc. complete and required instruments like ROTA Meter, Pressure gauge , labour controller, UV Disinfection System, with electronic control panel, complete in all respect as per standard specification, running and maintenance up to 1 Year.

Providing and Fixing Commercial Signage’s of Size 1.00 x 2.00, frame to be made of 65 mm Depth aluminium Section with Acp Sheet / GI Sheet on the back , Led modules powered by samsung + Water proof power Supply + wiring etc….. All Electrical items. and to be fixed on Wall with all necessary Civil, fabrication and Installation process, as per drawing and design, complete in all respect as per directed by Engineer in Charge.

Bidder Name

Amount

Raj Electricals(GSTN-08AGBPS1419A1ZV)