Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.6 LAccepted-AOC 18 837 KILIYARAA HOUSE PERUMPADAPPU PALLURUTHY PO KOCHI 682 006 | KOCHI | ERNAKULAM | KERALA | 682006 | L1 | Accepted-AOC LOWEST TENDERER | |
| 2 | L2₹25.6 L+₹98,110 (3.99%)Rejected-Finance 22 1685 ST JACOB CHURCH LANE PAMBAIMOOLA EDACOCHIN ERNAKULAM KERALA 682010 | COCHIN | ERNAKULAM | KERALA | 682010 | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹26.9 L+₹2.3 L (9.17%)Rejected-Finance 40 608A PULLOMPARAMBLI HOUSE MANDAKKARA ROAD KOCHI 682 018 | KOCHI | ERNAKULAM | KERALA | 682018 | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹27.4 L+₹2.8 L (11.4%)Rejected-Finance KATTUPADATH H AZHEEKAL PO VYPEEN 682508 | KOCHI | ERNAKULAM | KERALA | 682508 | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹27.6 L+₹3.0 L (12.3%)Rejected-Finance | L5 | Rejected-Finance Not being lowest |
Tender Value
₹29 L
EMD Value
₹58,000
Closing Date
2 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE FORT KOCHI
GARRISON ENGINEER MILITARY ENGINEER SERVICES GE FORT KOCHI -682 001
PROVISIONING OF ACCESS FOOTPATH, WALKWAY AND CERTAIN OTHER MINOR WORKS AT INS DRONACHARYA.
2022_MES_544963_1
8847/E8/GE_FORT_KOCHI
Open Tender
Civil Works
Item Rate
270 days
FORT KOCHI
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE FORT KOCHI
₹58,000
Yes
29 Oct 2022
12 Aug 2022
5 Sept 2022
12 Aug 2022
2 Sept 2022
19 Aug 2022
Amount
Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft and loose soil, complete all as specified and as directed.
M&L for hardcore of broken stone or boulders of gauge n.exc. 63mm, deposited, spread and leveled in layers n.exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed.
M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base etc, finished even and rough complete all as specified and as directed.
M&L for PCC 100 mm thick, 1:2:4 (Type B-1) using 20 mm graded crushed stone aggregate above sub base finished fair and even including necessary form work complete all as specified and as directed.
Material and labour for screed bed or bedding layer of mortar 20mm thick in cm 1:6 for laying floor finishes, complete all as specified and as directed.
M&L chequered cement concrete tiles 30 cm x30 cm x 20 mm thick set,jointed and pointed in neat cement slurry in floors with grey cement and pigments all as specified and as directed.
Material and labour for 50 mm sand cushioning including spreading, levelling and consolidation under interlocking tiles complete all as specified and as directed.
M&L machine pressed precast concrete interlocking paver block of any shape and size conforming to IS-15658-2006 of 60mm thickness,M-35 grade fixed with grey cement and no pigments, all as specified and as directed.
Forming construction joints 50mm deep, 10 mm wide, filled with bitumastic filling in proportion of bitumen and sand (1:2) complete all as specified and as directed.
Material and labour for pre-cast cement concrete block masonry with solid blocks, type C1(1:3:6) using 20mm graded aggregate, exc. 10 cm in width and setting in mortar 1:6, complete all as specified and directed.
M&L for rendering cement plaster 15mm thick in CM 1:4, and making surfaces even and smooth without using extra cement complete all as specified and directed.
Removing excavated material exc. 250 m but n.exc 500 m ,spreading and levelling in layers n.exc. 25mm thick in floors, complete all as specified and directed.
Demolition of concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed by the Engineer-in Charge.
Rendering 12 mm thick plastering in CM 1:4 on fair faces of brick work or concrete surfaces to be finished even and smooth (without using extra lime or cement) on internal surface etc. complete all as specified and as directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.
M&L for plain cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate as in coping etc including formwork complete all as specified and as directed : Note:-(i) The unit rate include for use of form work (straight or curved). (ii) Reinforcement if any shall be measured and paid separately.
Material and labour for precast RCC cover slab (1:2:4) type B-1 using 20 mm graded stone aggregate as in slab of drains etc; including necessary form work complete all as specified and as directed by Engineer-in-charge. Note:-(i) The unit rate include for use of form work (straight or curved). (ii) Reinforcement shall be measured and paid separately.
Material and labour for mild steel TMT bars 10mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & as directed by Engineer-in-Charge.
S & F for composite fibre Glass Reinforced Polymer (FRP) grating of 30 mm thickness without frame. Load capacity shall be 5 MT of make Thermodrain/KT/POOJA brand OR Equivalent as directed by Engineer in Charge. Material of grating should be resistant to sunlight (UV slabilised), water, chemical water and sewerage water. Density of material shall not less than 2 ton/cubic meter. Material shall have high impact resistance, flexible and not brittle. FRP shall comprise of 55% resin and 45% fibre glass with no filler content. Standard designing confirm to IS 1726 and BS EN 124 for load bearing test and permanent set test. Average wall thickness shall not less than 8 mm. etc complete all as specified and as directed.
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .