Work of erection of 66KV equipment, structures, control wiring, yard Lighting, Control-Room & Staff-Quarter Electrification etc at 66 KV Hathrol Sub Sation with Mesh earthing and furniture & 66 KV Hathrol LILO line from existing 66 kV Rupal-Punsari line.

Erection of 66KV Breaker (Any type / Make)

including supporting structure & fixing all its

accessories, fittings, connections etc.

complete as per owner's/supplier's manual

and instruction of E.I.C. including individual &

1 interpole wiring of operating box and that 4 5535

with M.K.Box. with assisting to the erection

engineer Erection without crane is permitted.

Rates are inclusive of

dragging/loading/unloading of same from site

store to erection site.

Erection of 66KV CT/PT (all type make) on its

erected structure including complete

2 dragging/ loading/ unloading of same from site Phase 18 623

store to erection site and fixing of required

clamps, connectors as per instructions of E.I.C.

Erection of 66KV LA (All type/make) on its

erected structure including complete

dragging/loading/ unloading of the same from

3 site store to erection site and fixing of required Phase 12 415

clamps, connectors, corona rings, surge

counter and other accessories etc. as per inst.

Erection of 66KV Centre Break Isolator (All

make) with earth blade on its erected

structure consisting of 3 base channels with

porcelain/solid core insulator including

interconnected piping with operating Set of

mechanism and accessories with final pole

adjustment for simultaneous operating &

closing. The rates are inclusive of dragging /

loading / unloading of the same from site store

to erection site as per instruction of E.I.C.

- - DO - - as above but without earth blade Set of

complete. pole

Erection of 66KV Poly cone/Solid Core/Bus

Post Insulator on its erected structure

including minor required fabrication &

complete fixing of accessories and shifting of

same including loading/ unloading from its site

store to erection site.

Laying of any size of 11KV XLPE cable including

excavation of trench 300mm wide & 600mm

deep including laying and filling up sand of

100mm layer from bottom & bricks on three

side of cable & refilling the trench with

7 Murram/soil & ramming etc. Required bricks, Mtr 150 138

sand, etc. will have to be supplied by the

contractor. Rates are inclusive of shifting of

cable drum to the site from S/S site store.

Drum should be handled only by jacking to

avoid damage to cables.

Laying of any size of 11KV XLPE cable in ready

made cable trench or in open space. Rates are

8 inclusive of shifting of cable drum to the site Mtr 600 63

from S/S site store. Drum should be handled

only by jacking to avoid damage to cables.

Erection of Structure for Equipment/Lighting

Mast/ VHF Mast including punching of nut

bolts. Rates are inclusive of minor required

fabrication and shifting of same up to erection

site from its s/s Store. including Stub Setting as

per instruction of EIC..

Erection of 66/11KV, class Power

Transformer with complete mounting of all

the accessories i.e. bushings, radiators,

conservator tank etc. including laying of cable

between all accessories/mounted on the

transformer/ marshalling KIOSK, painting of

10 rail and neutral supporting channels, filling

and filtration of oil with filter machine as per

direction of E.I.C. manufacturer Engineer or

as per instruction manual. Filter machine

shall be arranged by the contractor.

(a)15 MVA No 2 24905

(b)20 MVA No 0 31754.00

Stringing of Single ACSR Zebra Bus complete in

all respect with fixing of all fitting, insulators Rmtr Per

and all accessories as per the instruction of phase

Preparing and fixing of required length of

Jumpers of Single ACSR Panther/ Dog type

conductor in the switchyard on respective Bus Rmtr Per

& equipments, tensioning, Compressing & phase

dressing of jumpers complete as per

instruction of E.I.C.

Installation of Earthing Strips / MS Round Bar

as shown below including digging of 600 mm

Deep and 450 mm Wide Trench in any kind of

soil expects Rocky(HR/SR) / Fixing on

Structures as per attached drawing including

fixing arrangement with Two Bolt

13 Arrangement , Jointing with Nut Bolts and Lap

Welding and applying Zinc Rich Paint on

welded joints including supply of GI Nut &

Bolts as per specification and approved Earth

Mat Lay Put.

(a)75X10 mm GI Strip Mtr 0 52

(b)50 X 6 mm GI Strip Mtr 3500 43

Installation of Earthing Strips / MS Round Bar

as shown below including digging of 600 mm

Deep and 450 mm Wide Trench in Rocky soil

(HR/SR) / Fixing on Structures as per attached

drawing including fixing arrangement with

Two Bolt Arrangement , Jointing with Nut

14 Bolts and Lap Welding and applying Zinc Rich

Paint on welded joints including supply of GI

Nut & Bolts as per specification and approved

Earth Mat Lay Put.

(a)75X10 mm GI Strip Mtr 0 174

(b)50 X 6 mm GI Strip Mtr 0 164

Excavation in Hard Rock for excavation of

earthing pits/trenches Yard lighting poles, etc.

Providing & fixing, Testing and

Commissioning of Maintenance Free Treated

Earth Electrodes suitable for Normal soil as per

drawing no GETCO /E/P-021(1 OF 2) R2 DT

04.06.2015 and technical specification

GETCO/E/TS-maintenance free earth pits/R1

dated 04.06.2015 for 66/11 kv substation with

ground enhancement material/back

fill/grounding compound as per IEEE 80-2000

CLAUS 14.5(d) and as per part 7 of IEC

using copper bounded earth electrode(with

250 micron copper coating)having 24 mm

(mim) and 3000 mm length which shall be

capable of handling STC of 25 KA-1 sec work

also include Providing BB masonry inspection

chamber(man hole) incl. light type CI cover

Supply ,Installation Testing and

Commissioning of Maintenances Free Treated

Earth Electrodes suitable for Rocky Soil as per

drawing no GETCO /E/P-021(2 OF 2) R2 DT

04.06.2015 and technical specification

GETCO/E/TS-maintenance free earth pits/R1

dated 04.06.2015 for 66/11 kv substation with

ground enhancement material/back

fill/grounding compound as per IEEE 80-2000

CLAUS 14.5(d) and as per part 7 of IEC

using copper bounded earth electrode(with

micron copper coating)having 24 mm (mim) and

3000 mm length which shall be capable of

handling STC of 25 KA-1 sec work also include

Providing BB masonry inspection chamber(man

hole) incl. light type CI cover

Installation of 20/32/40 mm dia., 3 mtr. Long

18 vertical spike for mesh type earthing in Normal No 0 871

Installation of 20/32/40 mm dia. 3 mtr long

vertical spike for mesh type earthing

Erection of 66KV Control Panel, Relay panel or

C/R Panel or RTCC Panel including grouting of

panel, jointing with adjoining panels with

providing required B/N including required

fabrication for joining panels & entry of control

cables and complete vermin proofing.

Erection of 11 kV CB Panel of any make

including grouting, jointing with adjoining

panel and Horizontal , Vertical levelling

including required fabrication for entry of

Power Cable, Control Cable and complete

vermin proofing, job includes required bolts /

nuts etc and shifting of panel from SS Site store

to work site.

-DO- but Erection of LT panel Board & Battery

Charger (01 each) of any make as per

manufacturers instruction manual including

grouting, vermin proofing etc.

Erection of 250 / 100AH, 110 Volt D.C. Battery

Set on wooden/FRP stand as per instruction

manual of supplier, including first filling of

battery electrolyte, proper connection of cells

and applying, charging/discharging cycles as

per manufacturer's instruction manual and

instruction of EIC. applying charging/ dis

charging cycles as per manufacture/

instruction of engineer in charges ( 100 AH,

110 volt DC)

Erection of station transformer of 22KV or

11KV/430V, 63/100KVA on its plinth/DP

Structure ,grouting of foundation bolts, fixing

of channels.., D.O. fuse by fabricating str.& its

painting, danger board etc. including

connection with power cable/LV cable

terminations including shifting of all types of

materials and equipments as per EIC.

Minor Fabrication for erection of any

Equipment /Structure /Panel or anywhere in

25 L.S. (Max) 2 4992

sub stations as well as at opposite end

substation also Inst. Of E.I.C.

Erection of support structure for 11kv Power

cable termination at 11kv bushing for 15/20

MVA power transformer as per DRG No

GETCO/E/06S-STD/11KVSTR-A2-02. Job also

include minor fabrication if required as per

instruction of E.I.C.

Erection of supporting structure for Station

transformer as per drawing no : GETCO/E/06S-

STD/11KV STR A3-03. Job also include erection

27 of required 11kV LA and D.O fuse and minor No 1 998

fabrication if required as per instruction of

E.I.C.11kV LA and D.O Fuse will be provided by

GETCO free of cost.

Providing & fixing of Set of following Items on

11KV support structure for termination of

power cable to LV Bushings of Power

Transformer as per Drawing and instruction of

EIC. 1) 03 Nos. of

Alluminium Alloy Bus Bar of size 75X20 X

2) 11KV Post Insulator of PCD 127 mm - 12 No

3) 03 Nos. Copper laminated fusion welded

flexible jumper of size 75 X 10 X 600 mm having

2000 Amp capacity. Job also includes fixing of

03 Power cables& 03 Flexible Jumpers to Bus

with fabrication and providing Good Quality

Stainless Stell Nut Bolt of appropriate Size.

Erection of 11KV D.P. Structure (Girder/PSC

Pole) including required fabrication in Top

Channel, Cross Bracing, Level Piece etc with

providing required b/n. Works also includes

painting with one coat of Red Oxide, Two coat

of approved make alluminium paint. job also

includes erection of 11KV LAs. All the items will

be provided by GETCO free of cost.

Erection of 11KV D.P. Structure (Includes fixing

of 11KV A.B switches, 11kv pin insulators , and

jumpering 11kv cable to A.B switch & A.B

switch to 11kv Bus between D.P structure &

Cross Boundry). job also includes erection of

11KV LA and minor fabrication for fixing of

above items. All the items will be provided by

GETCO free of cost.

Providing of M15 Grade Concrete for various

equipment structure, Guy, 11kv DP, M.K. Box,

Neutral channels, cable support channel,

grouting of Pole/ Flood light structure with

cement, sand & metal in proportion of 1:2:4

respectively. The rates are inclusive of supply

of sand, metal, water & cement ,Muffing and

with smooth cement mortar (1:6) finish.

Loading, Transporting & Unloading of all SS

material like SS Structure, indoor & out door

32 SS Equipments, DP Structure, earthing Job 1 51720

materials etc.for SS & opposite end feeder bay

-Store to SS Site

Supply & laying of 1 Core X 25mm2,

Armroured Copper Cable/multi-strand

flexible of approved make ISI marked in ready

made trench or PVC pipe from Battery Charger

to Battery Set including termination at both

side as per inst. of EIC.

Providing and fixing of various type of sign

Board, sticker, Big Sign Board, earthing pit

board, earthing pit Board & Single line diagram

etc as per instruction of IEC. Sticker of red,

white, black Letters are to be utilised for

various sign board.

Earthing Pit Board Size:- 6" x 6" -30 Nos.

Safety Slogan Board, Hard Sheet board size 2'

x 2'and 4mm thick (Gujarati Language)- 2 Nos.

34 Safety Slogan Board, Hard Sheet board size 3' Job 1 24957.00

x 2'and 4mm thick (Gujarati Language) with

red and Yellow colour.-03 Nos.

Single line diagram size 5' x 3' Digital with

Alluminium frame with fitting and as per

approved diagram given by IEC.-01 No.

Big sign board size 5' x 4' and 2mm thickness

indicating sub station name digital with S.S.

rod with hole & as per approved symbol with

fitting charge.- 01 No.

Switch yard sign Board 12" X 6" with 2 mm

Thickness black & white Gujarati language.25

Safety Slogan Board size 2" x 6" in side control

room.-05 Nos.

Various type of control room equipment

sticker size-24 cms x 5cms.--18 Nos.

Safety picture board size :- 3' x 3' (Laminated

for O/D use)-03 Nos.

Name plate board of transformer size :- 2' x 1'-

Cable marker size:- 6" x 6", Radium, fixed on

750mm long M.S.Rod for fixing arrengement.-

P & F radium stiker for outdoor & indoor

equipment identification like LA ,Isolater, Circuit

35 Sq. inch 500 2

breaker ,Transformer, CT, PT, MK Box , CR panel

,11 kv Panel etc..

Providing and Fixing of fire stand from 75mm

Gl pipe B Class ISI mark heavy duty having 5ft

width and 4ft height as per inst of Engr. In

charge work includes cutting,drilling, welding

of pipe as required. Fabrication and supply of

16mm dia meter hook required size for

buckets. 4 Nos.of fire buckets are to be

provided fire stand should grouted with

excavation of pit size 300mm x 300mm-2 Nos.

of 600mm depth with 1:3:6 mix muffing

300mm in height including leveling of stand.

The fire stand is to be painted with post box

red colour of approval quality as per

instruction of EIC. All required approved

material including cement, sand, metal etc are

to be provided by contractor.

Providing, Fabrication and erection of VHF SET

Anteena support pipe on control room by

providing 25mm dia. B Class GI pipe of length

37 20 feet.including providing & fixing of 4 nos. of Job 1 1496

guy from GI wire 10 SWG. This job includes

painting of GI pipe by good quality paint white

and red alternatively

Labour charge for fixing of 11KV XLPE Indoor

38 / outdoor cable kit of any make for size 95 to No 24 748

300mm2. Cable kit provided by GETCO.

Providing & Fixing of

RAYCEM/MSEAL/CABSEAL make heat

shrinkable type 11KV XLPE Outdoor cable

Termination kit suitable for 11KV, 3C x

39 sqmm to 300 sq.mm XLPE power cable by No 6 6139

using Long Barrel Alluminium Lugs of

adequate capacity of Reputed Brand like

Jainson, Hex etc. Job also includes providing

of Bimatallic Square washer of proper size.

Providing & Fixing of Total Revival Type

Water R.O. Plant including Commissioning &

Testing and also with required peripherals for

installation of plant as per site condition

(1) Dimension: 320 X 275 X 410 mm

(2) Weight : 8 KG

(3) Water flow : 8 to 12 LPH (4) Input

power : 230V AC

(5) RO membrence : TFC spiral

RO Plant shall have guarantee for the

Providing and fixing of ISI marked Insulating

Mattysheet Suitable for 11KV Class As per

following specification. Reference IS:15652-

2006 with latest amendment. Suitable for

Voltage Class :B

Max Use Voltage : 11KV

AC proof voltage : 22KV

Dielectric strength : 45KV

Leakage current : < 10 micro ampere

41 Colur RED/BLUE sq.mtr 17 4492

Make : Vardhman or equivalent (

Rubberhouse India) Width :1 mtr.

Thickness :2.5 mm.

Surface :Chequred on one side and other side

plain. NOTE: Contractor has to supply Rubber

Matty strictly as per IS:15652-2006 with latest

amendment specification and shall submit

test certificate for routine test as per relevant

Providing & fixing of reputed make ISI marked

(with latest amendment) 9 KG Capacity Dry

42 Chemical Powder Type Fire Extinguisher. No 2 6301

Note: Contractor shall submit Test certificate

for routine test as per relevant IS.

43 - Do - but CO2 Type : 6.5 Kg No 2 7047

44 - Do - but CO2 Type : 22.5 Kg No 2 17817

- Do - but Mechanical Foam Type : 50 LTRs

TOTAL: SCHEDULE B - 1 Amount

SCHEDULE B - 2 : CONTROL WIRING

Description of work/Supply Unit S/S Qty Rate Amount

Preparing of complete schedule of wiring for

line/ transformer bay for 66KV bays in

46 triplicate. necessary drawing will be provided Bay 4 1996

by the GETCO. Schedule should be approved

by EE. or DE in charge.

Laying of Control Cable Up to 7 Core, 1.1KV

PVC, armored copper/ aluminum control

cable in readymade cable trench and inside

Hume pipe including binding / clamping of

47 cable with GI wire or saddles as per the Mtr 2000 6

requirement including the supply and fixing of

identification tags at both ends in between if

required to following size (Cable will be

supplied by GETCO at free of cost)

48 As above but for, Above 7 Core Control Cable Mtr 2000 10

Laying of Control Cable Up to 7 Core, 1.1 KV

PVC armored copper /aluminum cable in

ground by digging trench of suitable width and

450 mm depth in any type of soil including

supply and fixing of identification tag on both

end and at distance every 100 mtrs for

50 As above but for, Above 7 Core Control Cable Mtr 150 26

Providing and fixing 'B' class G.I. pipes of

following size for cable protection including

fixing with the structures.( Non SOR) including

required 'L' & 'T' band, coupling for CT,PT,

51 Transformer, M.K.Box cabling on structure

including required fabrication.(weight of pipe-

25kg/meter)

{a} 40mm dia Mtr 150 255

{b} 50mm dia Mtr 80 284

Termination of Control Cable at Panel / M.K./

Equipments including supply of required size

52 of brass cable glands, lugs, ferrules, PVC End 150 199

Binding Tape, Buttons etc. Up to 7 Core

Control Cable.

53 As above but Above 7 Core Control Cable., End 100 349

Providing & Installation and Commissioning of

Remote Control switch Board for ON/OFF

control of all 11kv Panel from operator's table

with supply of good quality metal sheet box (

18 SWG )size 450 x 450 x 125 mm with door,

20 nos standard ISI make and rating industrial

push botton,indication lamp(LED)with

54 installing accept/reset arrangement with Job 1 6489

required ISI marked copper flexible wire size

2.5 Sq. mm including complete wiring in PVC

pipe and fixing on wall or on floor as per inst.

of EIC.only 19/27 core x 2.5 sqmm cable supply

by GETCO.Job includes Supply of required nos.

of Disconnecting Type Terminal for wiring at

11 kV Panel Board end

Providing and fixing of all weather proof, cold

rolled sheet steel Junction Box for CVT & PT, CT

terminations with 30 Nos. of disconnecting

55 type, 'Elmex' make CATDM 4 or equivalent No 6 21549

type connectors and required no of fuses, links

etc.as per instruction of Engineer-in-charge

and as per drawing enclosed here with

TOTAL - 2 ( SCHEDULE B - 2 )

SCHEDULE B - 3 : YARD LIGHTING Amount

Description of work/Supply Unit S/S Qty Rate

Providing & fixing of all weather proof, cold

rolled sheet steel AC Panel - 2 for Yard-

Lighting, AC supply having (1) 63 A ,4P

MCB : 01 NO (2) MCX-12A Contactor :

01 NO (3) Digital timer : 01 NO (4) 20 A,TPN

MCB : 06 NOs (5) Indication Lamps,

NOS ( R , Y , B ) (6) Push Buttons : 02 Each

( Red & Green) (7)Terminal Connectorsas per

site requirement and other detail as per drg.

enclosed including grouting & necessary

fabrication of GI Angle or fixing on GI Structure

and earthing with main grid as per instruction

of EIC as per drawing enclosed.(1 to be utilised

for YArd lighting & 1 to be utilised as

LTDB(Main LT Distribution Board for StationX-

mer as per instru. & Modification of EIC))

Providing & fixing of all weather proof, cold

rolled steel sheet floor mounted fixed type

single door grey color Main AC Dist box having

size 900x600x250 MM with door closing

arrangement and necessary rubber gasket.

Contractor has to supply following materials

with box along with necessary mounting and

(1) L&T/Anchor/Havells Make 100A,4P MCCB -

(2) L&T/Anchor/Havells Make 63A,4P MCB -

(3) 100 A Copper Bus-Bar Link - length 6 inch

size & 25 x 3 MM - 4 Nos.

(4) Tinned Earth Bus 25 x 3 MM Length -

Inch - 1No.

(5) 25 & 16 sqmm Cu. flexible cable - 4 &

Meter respectively.

(6) Required Nos. of Cu. Lugs , etc. as per

instruction of EIC.

Supplying & laying of 3.5 Core x 50 mm2

Alluminium Armoured Control/L.T power

cable from distribution X'mer to Main

Distribution Board near dist. X'mer and from

MDB to indoor LT panel board (LTPB) - both

Runs. in readymade cable trench or by

excavating in any type of soil cable trench size

1 ft. wide 2.5 ft. depth and refilling the same

as per the direction of EIC. Item Includes the

cable laying upto termination box with clamps

& proper clamping of cable on gantries by GI

pipe & glands as per direction. Item includes

providing & supply of bircks, sand as per

requirement. The L.T power cable to be

provided by contractor shall be as per ISI

(Part-I).

Supplying & laying of 4 Core x 25 mm2

Aluminum Armored Cable from LT panel

board (LTPB) to Yard Light AC MK (AC Panel-

2)., AC Panel 1 in C.R. and yard AC Box

Control/L.T power cable of FINOLEX or

equivalent ISI make in readymade cable trench

or by excavating in any type of soil cable trench

size 300mm wide and 600mm depth and

58 refilling the same as per the direction of EIC. Mtr 150 175

Item Includes the cable laying up to

termination box with clamps & proper

clamping of cable on gantries by GI pipe &

glands as per direction. Item includes

providing & fixing of bricks, sand as per

requirement to protect cables .The L.T power

cable to be provided by contractor as under

:As per ISI 1554 (Part-I).

Laying of 4C x 4mm2 Copper cable - Armoured,

from yard-light AC panel-2 to all yard-light

fixture junction boxes on LM & street light

pole & Station transformer to Colony & LT

panel to watchman cabin.(Only laying. Cable

will be supplied by GETCO)

Laying of 4C x 2.5mm2 Copper cable -

Armoured, from yard-light AC panel-2 to all

junction boxes on post top lantern (Only

laying. Cable will be supplied by GETCO)

Providing & fixing of 'B' class ISI marked GI.

Pipe of 32/40mm dia for cable looping & road

crossing with necessary elbow/band for each

61 pole & J.Box for yard lighting & for Mtr 60 180

controlroom flud lights wiring work with fixing

on wall with shadles if required as per inst. Of

Providing & erection of 7.0 Mtr. long swaged

type welded GI tubular street light pole on the

foundation in any type of soil as per inst. of

E.I.C. confirming to relevent IS and as per

atached Drawing No. GETCO/E/STD/LTG.POLE

Providing & erection of 4.5 Mtr. long swaged

type welded GI tubular post top lantern pole

on the foundation in any type of soil as per

inst. of E.I.C. confirming to relevent IS and as

per atached Drawing No.

GETCO/E/STD/LTG.POLE -R2, DT-24-12-2019

Supply and fixing of Pole/Wall/Structure

mounted FRP junction box standard make of

required size with clamp, providing 1 SPN MCB

G class of 16 A having short ckt breaking

capacity of 10KA peak of standard ISI make like

L&T/ANCHOR/MDS /HAVELLS & 2 Nos. of stud

type connector of standard make like

Connectwell. The cable glands & lugs are

ncluded for both incoming & out going cables.

MCBs shall be of standard make like

MDS/HAVELLS & 2 Nos. of stud type connector

of standard make like Connectwell. The cable

glands & lugs are also included for both

incoming & out going cables.

Earthing to tubular pole/luminaries,by coil

type earthing of 10 SWG GI wire in earth pit of

1.5 mtr. Depth in any type of solil by using salt/

coke (charcole) 16 kgs each & remaining filling

with BC soil & clamping the earth wire with

pole & Junction box.

Providing and fixing of Single Piece Cast

Alluminium full frame with Acrylic Cover

integrated Energy Efficient flood light

luminaries on swaged pole / GI structure by

providing required fabrications, of

66 Philips/CGL/Bajaj/GE/Osram make, suitable No 13 7487

for 1 x 250 Watt HPSV/T with allied accessories

such as Capacitor Ignitor, Ballast, Control Gear

Box etc, 4 core 2.5 sq mm double insulated

flexible stranded wire should be used from

control gear fitting to junction box.

Providing & Fixing of LED Street Light Fixtures

(1X120W) (CGL Cat No. LSTO120/CDL 120W or

equivalent under Cat-II or above as per R&B

67 SOR), 4-core 2.5mm2 double insulated flexible No 8 9593

strended wire should be used from control

gear fittings to approved SMC type junction

box as per inst. of E.I.C.

Providing & fixing of 1x40W LED Post Top

Lantern fixtures (CGL Cat No. LPTO-40/CDL

40W or equivalent under Cat-II or above as per

R&B SOR) complete fitting in all respect and

68 core x 2.5 mm2 double insulated PVC flexible No 7 7556

copper cable from control gear fitting to SMC

junction box as per instruction of E.I.C. ( 4 No.

are to be provided on Main gate & 3 No. are to

be provided on 4.5Mtr Tubular pole)

TOTAL - 3 ( SCHEDULE B - 3 )

SCHEDULE B - 4 : CONTROL ROOM INDUSTRIAL ELECTRIFICATION

Description of work/Supply Unit S/S Qty Rate Amount

Providing and fixing of DBS as AC Panel - 1 for

CR of ISI marked Powder coated Pearl DBS of

ivory color , wall mounting, Double door

Distribution board of L&T, Heggar or higher

make fitted with 63Amp Phase Bus bar, Earth

/ Neutral Bars and inter connecting wires

with removable bottom gland plates for all

power cable entry from bottom with DIN

Channel ,incoming contact and 1No - 63Amp

TPN MCB 'C' Series ,6Nos-20A SP MCB 'C'

Series and 13No -10A SP MCB 'C' Series All

MCBs are L&T, Anchor or Higher make only.

Complete in all respect and as per instruction

Supplying & laying of following size

Control/L.T power cable of FINOLEX or

equivalent ISI make in readymade cable

trench or by excavating in any type of soil

cable trench size 300mm wide and 600mm

depth and refilling the same as per the

direction of EIC. Item Includes the cable laying

up to termination box with clamps & proper

clamping of cable on gantries by GI pipe &

glands as per direction. Item includes

providing & fixing of bricks, sand as per

requirement to protect cables . The L.T power

cable to be provided by contractor as under

:As per ISI 1554 (Part-I). 4 Core x 25 mm2

Aluminum cable -Armored, from LT panel

board (LTPB) to AC Panel-1 in Control Room.

Supplying & Laying Sub-main lines of 3X2.5

mm2 ( two for P & N and one for

Earthing)copper PVC insulated wier of ISI

brand in suitable standard make steel conduit

71 pipe having minimum 1.5 mm thickness of Rmtr 150 125

approved brand with ISI brand with clmpes

with it's associated accessories for various

circuits amanating from AC panel 1.as per

inst. of E.I.C.

Point wiring for control room tube lights,

fans, exhaust fans, fency lights, water tight

bulck head lights with PVC insulated 660 V

grade standard copper wire in ISI make GI

conduct pipe 20 mm dia and 1.6 mm wall

thickness size fitted with sadles on the

wall/ceiling. Size of wire shall be with 3C x

sq.mm PVC insulated copper wire for phase

and neutral and earth wire [ Green] and

Amp Anchor Roma or any equivalent switch

72 as per specification with 16 guage M.S. box. Point 60 1298

The box shall be covered with 3 mm thick

decorative mat finish hylum sheet. The work

is all inclusive of supply and fixing of required

materials as afore said [ like M.S.conduct

pipe , sadles , swithces , M.S. box , ceiling

Rose , flexible copper wire etc] to complete

point wiring with each fixture to be earthed

by SWG-12 stranded copper conductor having

green color as per direction and instructions

Providing, fixing & termination for emergency

D.C. supply arrangement. This job includes

supply & laying of 2C x 2.5 mm2 Copper

arrmoured cable from battery charges to

SBDC, fixing & providing SBDC & complete

wiring with supply of wire & D.C. lamp (110V

D.C., 100 watt-4 Nos.) in standard steel

conduit pipe as per drawing No:

GETCO/EE/6S-standard/S-015 as per inst. of

Providing and Fixing point wiring in GI.

Conduit pipe size 20 mm dia and 1.6 mm wall

thickness with single PVC insulated 2.5 Sqmm.

copper wire of ISI standard good quality using

1.5mm thick suitable size ISI mark ( 2+3 pin in

socket ) Anchor brand 15 Amp. 250 Volt plug

74 socket as separate plug point with shock Point 8 1213

proof accessories incl. indication lamp ;

erected on separate decorative mat finish

hylum sheet board on wall with providing

adequate green earthing wire as per

specification and instruction ofEngineer

---- Do ---- as above but with singal PVC

insulated 3Cx1.5 sq. mm.copper wire of ISI

75 mark plug socket for 5A domestic use Point 8 814

separate plug points per direction and

instruction of E.I.C.

---- Do ---- as above but looped on same board

i.e. no separate board, plug socket for 5A

76 Point 11 199

domestic use as per direction and instruction

Providing & Fixing of Ceiling Fan (CBLD) of

1400mm sweep Bajaj/Crompton / Orient/

usha / Cinni make (ISI approved). Fan is to be

purchased from authorised dealer. Flexible

wiring using twin core double PVC 48/0.2 mm

77 copper flexible cord of suitable & approved No 8 3000

make and size from ceiling rose upto fan

terminal & supply and fixing of energy saver

regulators, extra GI pipe of required size and

length for lowering of fan if required as per

instruction of EIC.

Providing and fixing of 41.5W LED Lighting

Fixture (CGL Cat No. LPFC-36-CDL 41.5W or

equivalent under Cat-II or above as per R&B

SOR) as per instruction of EIC.

Providing and fixing of 40W (1X4) LED Lighting

fixtures as per drawing (in office area & Porch

79 Area) (CGL Cat No. LCTLSN-40-CDL (1X4) 40W No 10 3417

or equivalent under Cat-II or above as per R&B

SOR) as per instruction of EIC.

Providing & fixing of 30W LED Street Light

Bulkhead (CGL Cat No. LSTO-30-CDL 30W or

equivalent under Cat-II or above as per R&B

SOR) on out side C/R building and inside cable

trench in C/R including wiring from ceiling rose

to fixture with suitable size of PVC insulated ISI

marked copper wire only as per Instruction of

Providing and fixing of approved make 40w

LED lighting fixtures as per drawing (in porch

81 area) (CGL cat no LCTLSN-40-CDL- (1X4) 40W No 2 3417

or equivalent under cat- II or above as per R &

B SOR as per instruction of Engineer in charge

Providing & fixing of industrial 30W LED street

light bulkhead (CGL Cat No LSTO - 30CDL-30W

or Equivalent under Cat - II or above as per R &

82 B SOR) including wiring from ceiling rose to No 12 2678

fixture with suitable size of PVC insulated ISI

marked copper wire only as per Instruction of

Providing and fixing of heavy duty exhaust fan

in battery room size 18" of Make

83 GEC/KHAITAN/ CROMPTON/ BAJAJ incl. M.S. No 1 3494

lourex shutter of Fan & necessary wall finishing

works and applying bird proof net on

Installation of C. I. Plate ( 10 KG) type

earthing for Control Room Installations with

laying of 10SWG Copper wire to be laid inside

2Mtr. Long heavy duty 19mm PVC pipe .This

84 work include preparation of earth pit of size No 3 499

0.5M x 1.5M depth and back filling by using

Solt, Charcoal 16 Kg. Each, and black cotton

soil with as per Inst. of EIC. Required all

material shall be supplied by contractor.

Same as item No.1 but with Fixing of Electric

bell with bell switch near officer's table. All

materials must be ISI mark and approved by

Engineer I/C

Providing and fixing of18W LED Lighting

fixture(CGL Cat No LCTL - CDL 18W or

86 Equivalent under Cat - II or above as per R & B No 3 1281

SOR) of any standard ISI make and as per

instruction of EIC

TOTAL - 4 ( SCHEDULE B - 4 )

SCHEDULE B - 5 : QUARTER RESIDENTIAL Furniture

Description of work/Supply Unit S/S Qty Rate Amount

P & F Steel chair 'S' type, Over hanging arm

99 with cushion with cane seat/back 1" X 16" No 2 8750

gauge round pipe frame.

P & F Steel rack of size 30" X 36" X 15" with

three partition, prepared with 20 gauges

P & F Steel table of size 54"X30"X30", one side

101 three drawars, one side shelf 1 X 18 gauge No 1 4600

square pipe with Nova pan pre lamination top

P & F Computer table made from pre

lamination Board size with Key Board facility

102 and drawer with continues printer out facility No 1 7200

and mouse tray and also with special tray CPU

and UPS having I.D. 4 X 21 inch C 2.5 F.T.

P & F Steel revolving chair, revolving & titing,

low back high type seat with foam rubber 3" in

seat 2" in back with good quality raxine cover,

five legs, Chromium plated frame

P & F Steel cup board of size 78"X36"X19" four

partition, door and shelves 20 gauge, body

gauge, color olive green as per drawing

TOTAL - 5 ( SCHEDULE B - 5 )

Description of work/Supply Unit S/S Qty Rate Amount

1 Check Survey. 0.50 Km 9277.00

Excavation excluding back filling, but including

shoring, shuttering, dewatering, free cutting

2 for tower footings etc.for :-

a) Normal soil either dry or wet / Sandy soil 17.72 Cu.m 307.00

b) Black cotton soil either dry or wet 105.13 Cu.m 614.00

Installation of steel reinforcement in concrete

foundation including supply of M.S. bars,

binding wire & their cutting, bending, binding

and laying in position as per drawing.

Stub-setting upto including back-filling but

excluding excavation and concreting etc. for all

types of towers / extensions except special

towers. (Weight of stub, cleat & template with

4 Bolt & Nuts of stub & template shall be

a) up to 6 Mtr.Extn. 1.76 MT 8206.00

b) up to 9 to 21 mtr 0.00 Mt 9918.00

Concreting of foundation by M20/M15/M25

mixure including shoring, shuttering,

dewatering etc. for normal tower / tower with

extension upto 21 mtr. (Rates are with

5 cement)

a)M15 (1:2:4) Mixture 0.00 Cu.m 10306.00

b)M20( 1:1.5:3) Mixture 15.00 Cu.m 12246.00

Grounding of towers with pipe type earthing

including excavation and back filling and

6 supply of all material like 32mm dia heavy duty 2.00 Set. 8985.00

3 mtr. Long G.I. Pipe & 50 X 6 mm G.I.flat, bolt-

nuts, salt, coal / charcoal etc. as per drawing.

Erection of super structure upto 6 meter

extention including free cutting, fixing of

tower accessories, attachments except ACD /

DP / NP / CIP / PP and excluding tack welding

of bolts. This includes tacking delivery of tower 11.00 MT 10076.00

7 materials and bolt-nuts from Board's stores

etc. for normal, extension & special towers at

destination and keeping them in safe custody

and transporting the same to erection site.

Same as above but erection of 9/12/15/21 mtr

extension portion only

Fixing of ACD (Anti climbing device ) including

supply of bared wire. (except special tower)

a) 66 Kv 2.00 Loc. 2596.00

Providing & fixing of DP / NP / PP / CIP

including supply of plates and supply of

G.I.bolts & nuts and tack welding as per

Tack welding of nuts upto approx. 10 mtrs.

Height OR two bottom-most panel from

10 ground level at three places on nuts 1200.00 15.00

diametrically and applying zinc rich paint

immediately after tack welding.

Stringing of ONE ground wire inculding Laying

Jointing tentioning, Clamping with

11 Accessories, Jimpering & sister wire, Vibrating 0.00 RouteKm. 16843.00

damper earth bond etc & inculding tree

Stringing of ACSR / AAAC 6 (SIX) conductor for

Single circuit including laying, jointing,

tensioning, clamping with armour rods,

hoisting of insulator string, fixing of jumpers,

12 dampers etc.&with required tree cutting on

entire length for edequate clearances / safe

charging line.

b) For Panther 0.50 112928.00

Painting of Name of line, location

number,colour code & telephone number on

Tower for information of concerned

substation including supply of paints etc…

Erection of stay set complete with stay clamp,

14 turn buckle, eye bolt, anchor rod & binding 12.00 Set 802.00

with 7/8 or 7/10 SWG earth wire.

providing concrete for "H" Frame structure

with M15(1:2:4 ) mix. Including stay sets with

supply of materials like cement of 43 grade,

sand, metal etc. with muffing (400mm

Dia.x300mm Ht.) above ground level for all the

structures.

Conversion of 'A' type 'H' frame structure into

'B' type 'H' frame structure in existing line by

replaceing necessary channels etc.and Job

14 termination and restringing of Dog or Panther 2.00 work(Per 34042.00

3 conductors for making LILO arrangement Loc.)

with existing line or change over of line during

availibilty of specified outage period

Dismantling of ‘A’ & ‘B’ type ‘H’ frame

structure by breaking of muffing upto 450 mm

depth from ground level and cutting the

girders from 450 mm depth from ground level

by gas cutting & crediting the material to

GETCO Store or Substation including

transportation as instructed by Engineer

in-charge.

Dismantling of all three conductors and line

materials such as insulators, hardwares etc.

and crediting to the GETCO’s Store or

16 Substation including transporation as per 0.50 RKM 16136.00

instruction of Engineer in-charge with

submission of pole wise inventory for

preparing C.R.note.

TOTAL - 6 ( SCHEDULE B - 6 )

Total of Schedule (1 to 6) Rs

Total Amount

Total Amount

In words, Thirty-Nine Lakh Fourty-four Thousands Five hundred and Eighty-Eight Rs. only

CERTIFICATE

I we am / are willing to carry out the above work at_______________________________________ % above / below (percentage)

should be written in figures and words. ___________________________________________________________Percentage above /

below the tender amount work out Rs. ______________________________________________Rupees in

words____________________________________________________________________________

Signature of Contractor,