Renovation and modification of SLDC Control room for SCADA upgradation at Kalamassery

Renovation and Modification of SLDC Control room for SCADA upgradation at Kalamassery.

Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge

Engaging labours for the shifting of almirahs ,files,furniture and other office equipment to the location specified by the Engineer in charge

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking with in 50 metres lead:Upto 10 mm thick

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

Dismantling Access Floor panel of 600x600x32 mm, with modular framework, pedestals made out of GI tube, stringer system etc. including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer in-charge.

Dismantling Access Floor panel of 600x600x32 mm, including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer in charge.

Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below

Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area 3 sq. metes and below

Dismantling of flushing cistern of all types (C.I. / PVC/ Vitrous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in:Cement mortar 1:6 (1 cement : 6 coarse sand)

Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15⁰ landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more

Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.32 mm nominal outer dia pipes

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc 63 mm pipe 4 kgf/ cm2

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC Solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 110 mm pipe 4 kgf/cm2

Providing and fixing required Stainless Steel long body tap of approved quality and preferable brand, including all materials, fittings and conveyance charges as per direction of Engineer-in-charge.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.GI Metal Ceiling Lay in perforated Tegular global white color tiles of size 595x595 mm and 0.5mm thick with 8 mm drop; made of GI sheet having glavanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyster powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.

Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.12.5 mm thick fully Perforated Gypsum Board tile made from plaster board having glass fibre conforming to IS: 2095 Part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with centre borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side , having as NRC ( Noise Reduction Co efficient) of 0.79, with 50 mm resin bonded glass wool backing.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum fire resistant board conforming to IS; 2095-Part I

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer,in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 1000x1000 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 1200x600mm

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.<br>Size of Tile 1200x600mm

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing superior quality factory made Fibre door with Shutter and frame of suitable size including hinges with SS screws, tower bolts, handles, latch etc all fittings. As per the standard specification and direction of Engineer in charge

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

Finishing walls with textured exterior paint of required shade :Old work (One or more coats) applied @ 1.82 ltr/10 sqm.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

Urinal ceramic hollow partition of size750mm depth ,350mm top width,150mm bottom width, 100mm thick at wall side and 50mm at end. the rate shall include all fitting and conveyance charges.

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre /8 litres), including seat cover, and cistern fittings, nuts bolts and gasket etc complete.

Providing and fixing white vitreous china water closet squatting pan ( Indian type):Long pattern W.C. pan of size 580 mm

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink without drain board610x510 mm bowl depth 200 mm

Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

Providing and fixing C.P brass stop cock ( concealed) of standard design and of approved make conforming to IS: 893115 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately)

Providing and fixing 12mm thick frameless sliding Toughened glass door including S.S sliding door (DORMA PT Series) packages, transportation, loading and unloading charges etc all complete as per the direction of Engineer in-charge.

Providing and fixing stainless steel good quality tubular handle bar 32 mm outer dia., 3.0 mm thick ,1000 mm long with SS screws etc. complete as per direction of Engineer-in-Charge.

Providing and fixing best make approved quality stainless steel door lock for the glass<br>door including transportation and fixing etc complete.

Mirror polishing on marble work/ granite work/stone work where ever required to give high gloss finish complete.

Providing and fixing Access Floor panel of 600x600x32 mm medium grade.Filled Steel anti static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64 welds in each dome and 20 welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyro grip noncombustible Portland cementitious core mixed with lightweight foaming compound. SUB HEAD : 11- FLOORING access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology upto 1mm thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer-in-charge. All specification must be printed on the side of the panel to ensure the quality of the product. 300 mm Finished Floor Height (FFH)

Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of: a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on the G.I. Base plate of size 100mmx100mmx3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5mm welded with GI fully threaded stud 16 mm outer diameter with two GI check nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug. b) Stringers system in all steel construction hot dipped galvanized of rectangular size 570x20x30x0.80 mm thick having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in-charge. c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel Guages: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64 welds in each dome and 20 welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with light weight foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology upto 1mm thickness for superior adhesion and Surface flatness within 0.75mm. The panel is to withstand a Concentrated Load of 363 Kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50 kg all complete as per the approved manufacturers specification and as per the direction of Engineer-in-charge. All specification must be printed on the side of the panel to ensure the quality of the product.300 mm Finished Floor Height (FFH).

Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of: a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on the G.I. Base plate of size 100mmx100mmx3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5mm welded with GI fully threaded stud 16 mm outer diameter with two GI check nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug. b) Stringers system in all steel construction hot dipped galvanized of rectangular size 570x20x30x0.80 mm thick having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in-charge. c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel Guages: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64 welds in each dome and 20 welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with light weight foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology upto 1mm thickness for superior adhesion and Surface flatness within 0.75mm. The panel is to withstand a Concentrated Load of 363 Kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50 kg all complete as per the approved manufacturers specification and as per the direction of Engineer-in-charge. All specification must be printed on the side of the panel to ensure the quality of the product.450 mm Finished Floor Height (FFH).

Providing and fixing removable raised/false access flooring with system and its components of departmental materials for different plenum height with possible height adjustment upto 50 mm, G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as specified and as directed by Engineer-in-charge consisting of: (a) Providing at required spacing to form modular framework with epartmental materials for pedestals for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug.<br>(b) Stringers system at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in-charge.

Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof.The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured.

Providing and fixing aluminium work for sliding windows with extruded built up standard tubular appropriate sections of approved make conforming to IS : 733 and IS: 1285 with powder coated aluminium section, fixing with dash fasteners of required dia. and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing, stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge, including Glazing with 4mm thick glass panes, dash fasteners, labour & transportation

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty :Float glass panes of thickness 4 mm

Refixing old glass panes with putty and nails .

Providing and fixing sticker blinds over glass partition as per approved design. The cost included all fixing and cutting as per the direction of Engineer in charge cost also include material and conveyance charge etc.

Providing and fixing shelves of suitable size of breadth 400mm, using good quality MDF board of Pr-laminated with decorative lamination on both sides exterior grade-1 of 18mm confirming to IS:14587 ( Brand- Action tesa, Green panelmax, Jacwud or equivalent) for shelves, support and doors and 12mm thick multiwood for backing; 2mm thick PVC edge band on all door edges and 0.45mm on all cutting edges. The rate shall be included cost of providing, SS auto close (soft type) hinges, SS multi purpose locks, SS fancy handle, L clamp etc.(Preferable brands Ebco/Hafele/Hettich). as per drawing and specification and also include all fittings and all conveyance charge etc. complete. For the purpose of payment actual elevation area of the shelf shall be measured.

Providing and fixing Showcase of suitable size of breadth 300mm, using good quality MDF board of Pr-laminated with decorative lamination on both sides exterior grade-1 of 18mm confirming to IS:14587 ( Brand- Action tesa, Green panelmax, Jacwud or equivalent) for shelves, support and doors and 12mm thick multiwood for backing; 2mm thick PVC edge band on all cutting edges. The rate shall be included cost of providing L clamp, SS Screws etc.(Preferable brands Ebco/Hafele/Hettich). as per drawing and specification and also include all fittings and all conveyance charge etc. complete. For the purpose of payment actual elevation area of the shelf shall be measured.

Providing and fixing cabinet below the slab at pantry with Thomson Multi wood or equivalent make board exterior grade 18 mm thick pre laminated with decorative on both side with screws and fittings wherever required. Edges to be painted with polyurethane primer. The rate shall be included cost of providing, SS auto close (soft type) hinges, SS multi purpose locks, SS fancy handle, L clamp and all other fittings. (Preferable brands Ebco/Hafele/Hettich). as per drawing and specification and also include all fittings and all conveyance charge etc. complete. For the purpose of payment actual elevation area of the shelf shall be measured.

Providing and fixing shelves of suitable size of breadth 300mm, using good quality MDF board of Pr-laminated with decorative lamination on both sides exterior grade-1 of 18mm confirming to IS:14587 ( Brand- Action tesa, Green panelmax, Jacwud or equivalent) for shelves, support and doors and 12mm thick multiwood for backing; 2mm thick PVC edge band on all door edges and 0.45mm on all cutting edges. The rate shall be included cost of providing, SS auto close (soft type) hinges, SS multi purpose locks, SS fancy handle, L clamp etc.(Preferable brands Ebco/Hafele/Hettich). as per drawing and specification and also include all fittings and all conveyance charge etc. complete. For the purpose of payment actual elevation area of the shelf shall be measured.

Providing and fixing modular L shaped work station of size 1500mmx1500mm in length, and width of 750mm( front side 600mm+150mm projection ) and 600 mm other side, 750mm height up to writing platform( including bush of 40mm thick) using good quality MDF board of Pr-laminated with decorative lamination on both sides exterior grade-1 of 18 mm thick confirming to IS:14587(Preferable brands Action tesa/green panelmax),have to provide three drawer(2 no-400mmx139mm and 1 no-400mmx360mm)using 18mm thick MDF,SS telescopic drawer,SS fancy handle(Ebco/ Hafele/Hettich),Auto close hing,Multi purpose lock(Ebco/ Hafele/Hettich) above the working platform a partition wall as pin up board of same material at a height of 450mm at one side with respect to the orientation of workstation, with a file rack (size of partition 300mmx300mm)of capacity to hold four numbers of file in vertical at one end to be provide, cumulative height of 1200mm up to top of pinup board. Use 2mm and 0.45mm thick PVC edge band on exposed edge surface. Provide a foot rest of full length in front side only using MS Rectangular section of c/s -100mm x 50mm with proper support. Raceway are to be provided at desired position on the frame(below and above work surface) for switching the switch, sockets, data cables. The rate shall be included cost of providing three drawers, Foot rest, key board tray, CPU holder, etc. as per drawing and specification and also include all fittings and all conveyance charge etc.

Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm

Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

Providing, Supplying and laying 6mm thick clear heat strengthened glass (toughened glass) including all labour charge and transportation. For payment, only the actual area of glass on face 1 of the glass panels (excluding the areas of the grooves and silicone sealant) provided and fixed in position, shall be measured in sqm.

Providing and fixing plain lining with necessary screws/nuts/& bolts/nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in-charge ( Frame work shall be paid for separately)12 mm thick commercial ply conforming to IS: 1328 BWR type

Providing and fixing decorative lamination of approved manufacture of thickness 1mm for conference table top, wall panelling etc.

Providing & fixing in position SPC ( stone plastic composite) Flooring with Matt finish planks of suitable sizes in approved quality, colour, texture and finish. The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded polyethylene foam sheets, over prepared surface all complete as per the standard specification and also include all fittings and all conveyance charge etc. as per the Engineer incharge.

Providing and fixing partition wall of 50mm thick with rectangular section of an aluminium frame 40mmx20mmx2mm [email protected]/m dual side covered by aluminium composite panel cladding in approved shapes in any colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick).The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF /Lumiflon based fluoropolymer resin coating of approved colour and shade on face1 and polymer (Service) coating on face 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, silicone sealant, backer rods etc. The rate shall be as per drawing and specification and also include all fittings and all conveyance charge etc complete as per the direction of Engineer in-charge.

Providing and fixing fabric polyester Zebra blinds including all fittings and conveyance<br>charges as per the direction of Engineer in charge

PART 2- Electrical

Part A Electrical wiring

Dismantling of 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker

Dismantling four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Dismantling existing distribution boxes

Dismantling of ceiling fan, including wiring the down rods of standard<br>length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc.<br>as required.

Dismantling pre - wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Dismantling metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front <br>

Dismantling of exhaust fan in the existing opening, including making good the damage connection testing, commissioning etc. as required.<br>Upto 450 mm sweep

Dismantling medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.

Supply, Errection, testing and commissioning of cubicle type, dust & vermin proof, free standing,floor mounting front operated, powder coated panel boards Complete with all inter connection, control wiring, earthbus of adequate capacity &double earthing to all switches etc. as per Electrical Inspectorate standards including .1 No. 100A 4P isolator ,4 Nos.40A TPN MCB, 2 Nos.20A TPN MCB, 7Nos.16A SPN MCB, 1 No.40A TPN MCB as spare.

Supply and installation of 12-way,SPN, Metal type, Double Door A/C indoor unit Distribution Board, surface / flush mounted on wall, interconnected wiring complete with earthing lugs, including I/C-32 A DP MCB, 40A 30mA DP RCCB. Outgoings 8 Numbers 6/10/16 AMP SP MCB<br>wiring dressing with ferruling, termination of circuits with ping type copper lugs, blank plates, etc.

Supply and installation of 12 ways VTPN DB, Metal type, Double Door (UPS) surface / flush mounted on wall, with<br>,Copper Bus bar,, all accessories complete, interconnected wiring complete with earthing lugs, including DB wiring dressing with ferruling, termination of circuits with ping type copper lugs, blank plates, etc. 40A "C" curve type TPN MCB and 40A 30 mA HPi type FP RCCB as incomer 36 nos 10/16/20/25 A MCBs as outgoings.

Supply and installation of 12-way,SPN, Metal type, Double Door UPS Light Distribution Board, surface / flush mounted on wall, interconnected wiring complete with earthing lugs, including I/C-32 A DP MCB, 40A 30mA DP RCCB. Outgoings 4 Numbers 10/16 AMP SP MCB<br>wiring dressing with ferruling, termination of circuits with ping type copper lugs, blank plates, etc.

Supply, Errection, testing and commissioning of cubicle type, dust & vermin proof, free standing,floor mounting front operated, powder coated panel boards Complete with all inter connection, control wiring, earthbus of adequate capacity &double earthing to all switches etc. as per Electrical Inspectorate standards. including 1 No. 63A 4P ,isolator 6 Nos.40A TPN MCB

Supply installation testing and commissioning 8 WAY TPN DD DB with the following: Incomer: 1 No.40A, FP MCB and 40 A 30 mA RCCB with neutral & earth links, Outgoings 24 number 10 /16 /20 A SP MCB's

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)4 way (4 + 12), Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

Supply & Installation of concealed / ressessed circuit wiring using 660V copper conductor PVC insulated wires (with proper R,Y,B color code) in PVC conduit through wall/ceiling/table partition including 3R (P+N+E) circuit wires from the relevant DB as required.<br>4 run 16 Sq.mm Copper Flexible cable with 2 runs of 6 sq mm wire in pvc conduit

Supply & Installation of concealed / ressessed circuit wiring using 660V copper conductor PVC insulated wires (with proper R,Y,B color code) in PVC conduit through wall/ceiling/table partition including 3R (P+N+E) circuit wires from the relevant DB as required.<br>4 run 6 Sq.mm Copper Flexible cable with 2 runs of 2.5 sq mm wire

Supply & Installation of concealed / ressessed circuit wiring using 660V copper conductor PVC insulated wires (with proper R,Y,B color code) in PVC conduit through wall/ceiling/table partition including 3R (P+N+E) circuit wires from the relevant DB as required.th wire<br>2 run 4 Sq.mm Copper Flexible cable with 1 run of 2.5 sq mm wire

Supply & Installation of concealed / ressessed circuit wiring using 660V copper conductor PVC insulated wires (with proper R,Y,B color code) in PVC conduit through wall/ceiling/table partition including 3R (P+N+E) circuit wires from the relevant DB as required.<br>3 run 1.5 Sq.mm Copper Flexible wire

Supply & Installation of concealed / ressessed circuit wiring using 660V copper conductor PVC insulated wires (with proper R,Y,B color code) in PVC conduit through wall/ceiling/table partition including 3R (P+N+E) circuit wires from the relevant DB as required.<br>2 run 2.5 Sq.mm Copper Flexible cable with 1 run of 1.5 sq mm wire

Supply, Laying & commissioning of XLPE armoured Aluminium Cables of the following sizes, laying in built up trench, racks, risers truss,walls,pulling through pipes, including all minor civil works such as fixing of brackets, excavation of earth, chipping of floors chasing of walls etc. as directed complete.<br>3.5 x 70 sqmm 1.1KV XLPE AL. Cable

Supply, Laying & commissioning of XLPE armoured Aluminium Cables of the following sizes, laying in built up trench, racks, risers truss,walls,pulling through pipes, including all minor civil works such as fixing of brackets, excavation of earth, chipping of floors chasing of walls etc. as directed complete. 3.5 x 50 sqmm 1.1KV XLPE AL. Cable

Supply & Carrying out cable end termination using brass compression type cable glands, Aluminum crimping lugs gland earthing of adequate size etc. complete. <br>3.5 x 70 sqmm 1.1KV XLPE AL. Cable

Supply & Carrying out cable end termination using brass compression type cable glands, Aluminum crimping lugs gland earthing of adequate size etc. complete. <br>3.5 x 50 sqmm 1.1KV XLPE AL. Cable

Supply , installation and termination of Raw power sockets consisting of 1 no of 16A switch, 1 nos 16A 3 pin socket placed below the table /on wall/ on partitions.

Supply , installation and termination of UPS work station consisting of 2 nos of 6A switches, 2 nos 3 pin sockets placed below the table. <br>

Supply , installation and termination of Raw power sockets consisting of 1 no of 6A switch, 1 nos 6A 3 pin socket placed on table /on wall/ on partitions combined with light switches

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm)

Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required2 run of Cable

Supply & Installation of concealed / ressessed / surface light point wiring using 2.5 sq mm 660V FRLS grade 3R (P+N+E) copper conductor PVC insulated wires (with proper R,Y,B color code) pulled through medium gauge PVC conduits laid concealed / over false ceiling or in wall chases or on the ceiling and approved make modular type switch plate, switches, MS concealed back box, etc. as required. (The item rate shall include switch board to the first light point / primary point / full point) Primary light points upto

Supply & Installation of concealed / ressessed / surface light point wiring using 660V FRLS grade 3R (P+N+E) x 1.5 Sq.mm copper conductor PVC insulated wires (with proper R,Y,B color code) pulled through medium gauge PVC conduits laid concealed / over false ceiling or in wall chases or on the ceiling and approved make modular type switch plate, switches, MS concealed back box, etc. as required. (The item rate shall include switch board to the first light point /primary point / full point )Primary light points

Supply , Laying and fixing of earthing conductor of copper flat including necessary accessories in trenches , walls , pulling through pipes etc. Cu. Flat 25 x5 mm

Supply & Installation of 10 W LED Tube light / flush mounted Light fixture , wall mounted with all accessories for toilet area.<br>

Supply & Installation of 15 W LED Spotlight/Down light flush mounted Light fixture , making cutouts in false ceiling with all accessories.<br>

Supply and Fixing LED Tube Light (White, 18 Watts) 1200mm,240V

Supply & Installation of 30W square, full lit panel type LED Lightfixture.The fitting shall be suitable for plain ceiling with necessary accessories<br>

Supply & Installation of 40W 2' X 2' full lit panel type LED Lightfixture.The fitting shall be suitable for grid / plain ceiling with necessary accessories<br>

Supply & Installation of LED strip light warm white in colour, 12W/ mtr, mounted in false ceiling cove with all accessories and suitable Drives<br>

Supply Installation, testing and commissioning of 400 mm sweep Wall Mounting fan

Supplying & fixing of 2mm thick G.I. ladder type cable Trays . The cable tray shall be fixed to the ceiling / wall with 8 mm threaded rod support with 35mmx2mm thick GI slotted 'C' channel patti at an interval of 1 meter or the MS angle iron fabricated support depending upon the location. The rate shall include the cost of Supports, hardware & accessories, etc. complete as required.<br>Cable Tray :- 600 mm wide x 50 mm height x 2mm thick

<br>Supplying & fixing of 2mm thick G.I. ladder type cable Trays . The cable tray shall be fixed to the ceiling / wall with 8 mm threaded rod support with 35mmx2mm thick GI slotted 'C' channel patti at an interval of 1 meter or the MS angle iron fabricated support depending upon the location. The rate shall include the cost of Supports, hardware & accessories, etc. complete as required.<br>Cable Tray :- 300 mm wide x 50 mm height x 1.6 mm thick.

PART- B Air Conditioning

Supply of 11 Tr Inverter Ductable Ac unit with DC Inverter Compressor and corded remote controller with all standard fittings ,safety devices suitable to work till 50 deg ambient , Rated Power : IDU: 230 +/- 10% / 50/ 1 & ODU: 400 +/- 10% /50/3 - Refrigerant should be R410a

Supply of 4.0 Tr inverter Ductable Ac unit with energy efficient Scroll Compressor and corded remote controller with all standard fittings ,safety devices suitable to work till 50 deg ambient , Rated Power : IDU: 230 +/- 10% / 50/ 1 & ODU: 400 +/- 10% /50/3 – Refrigerant should be R410a

Supply of the 2 TR capacity 3 star rated Non Inverter split type Air conditioner unit fitted with rotary compressor operating on refrigerant R32/410a for high wall mounting, capable of performing Cooling, Air circulating ,Filtering etc. with 3 RMT Copper Pipe, cordless remote controller, vacumising,nitrogen pressure testing etc, suitable to work on 230v,50Hz single phase AC power as required.

Supply of the 1.5 TR capacity 3 star rated Non Inverter split type Air conditioner unit fitted with rotary compressor operating on refrigerant R32/410a for high wall mounting, capable of performing Cooling, Air circulating ,Filtering etc. with 3 RMT Copper Pipe, cordless remote controller, vacumising,nitrogen pressure testing etc, suitable to work on 230v,50Hz single phase AC power as required.

Supply of Precision Air conditioner with Digital Scroll Compressor with Capacity of 9 Tr capable of providing precision cooling for Server Room to maintain adequate temperature and humidity with Air flow configuration Down flow up and Refrigerant R410a

Installation, testing and commissioning of 11 Tr Inverter Ductable Ac unit

Installation, testing and commissioning of 4 Tr Inverter Ductable Ac unit

Installation, testing and commissioning of the 2 TR capacity 3 star rated Non Inverter split type Air conditioner

Installation, testing and commissioning of the 1.5 TR capacity 3 star rated Non Inverter split type Air conditioner

Installation,testing and commissioning of Precision Air conditioner with Digital Scroll Compressor with Capacity of 9 Tr

Supply and Installation of Refrigerant piping including supply and installation of insulated 13 mm thick nitrile rubber insulation between the Condensing unit and the Indoor unit, with Hard drawn Copper pipes with brazed joints for both supply and return .The running meter shown in the quantity is the total of Liquid and Discharge lines. (11 TR DX units)

Supply and Installation of Refrigerant piping including supply and installation of insulated 13 mm thick nitrile rubber insulation between the Condensing unit and the Indoor unit, with Soft drawn Copper pipes with brazed joints for both Liquid & Discharge line. ( 1.5TR /2.0 TR Hi wall Split units)

Supply and Installation of Refrigerant piping including supply and installation of insulated 13 mm thick nitrile rubber insulation between the Condensing unit and the Indoor unit, with Soft drawn Copper pipes with brazed joints for both Liquid & Discharge line. (For 4.0TR Ductable

Supply and Installation of Communication & Control 3 core Sheathed 1.5 Sq mm cable between Condensing unit and Evaporative units with supports and PVC conduits

Supply and Installation of Communication & Control 4 Core 1.5 Sq mm flexible copper cable between Condensing unit and Evaporative units with supports and PVC conduits.

Drain pipe for Condensate drain to the nearest drain point with 25 – 32 mm PVC pipe insulated using 9mm thick Nitrile Rubber tubing as per Client/Engineers instruction

Supply,installation, testing and commissioning of 24 Hour programmable Timer including NONC contactors, Over load relay, Indicators and ON/OFF Switch

Dismantling the air conditioner in the control room and conference hall and relocating it to a new location as per Client/Engineer

Lifting , Shifting and positioning of indoor and outdoor units

Supply, fabrication, installation and testing of flexible connection for each ductable unit

Supply and Erection of Drain pipe for condensate drain to the nearest drain point with 25 – 32 mm CPVC pipe insulated using 9mm thick Nitrile Rubber tubing.

Supply and erection of 2.5 Sq.mm 3 Core Power cable for evaporative units with supports and PVC conduits

Supply and erection of Communication CAT6 cable between condensing unit and evaporative units with supports and PVC conduits.

Supply and charging refrigerant gas (R410A) for the refrigeration system

Supply and Installation of efficient,Corrosion-resistant,Leak-proof and durable Refrigerant piping for 9TR precision air conditioner

Supply and Installation of Extruded Aluminium powder coated M S Collar Dampe

Supply and Installation of Extruded Aluminium powder coated Non return Dampers for Duct mouth connection

Supply and Installation of Extruded Aluminium powder coated Return Air Grills.

Supply and Installation of Extruded Aluminium powder coated Supply Air Grills

Supply and installation of Return air Floor Grills along with reinforced arrangements without VCD

Supply and installation of air Floor Grills along with reinforced arrangements with VCD

Supply, erection testing and commissioning of Factory fabricated Ducting of size 24 SWG complete with flanges in accordance with the approved shop drawing as per SMACNA standards

Supply, erection testing and commissioning of Factory fabricated Ducting of size 22 SWG complete with flanges in accordance with the approved shop drawing as per SMACNA standards.

Supply and Installation Acoustic Insulation, open cell 10 mm Nitrile Rubber - Class O insulation S 140kg/m3 insulation using recommended adhessive

Supply and Installation of Thermal Insulation, closed cell 9 mm Nitrile Rubber - Class O insulation using recommended adhesive.

Supply and installation of Floor insulation with Thermal Insulation 19 mm Class 0 closed cell pasted on the floor

Part-C SMOKE DETECTOR INSTALLATION

Dismantling of existing control panel of 11 zones capacity

Dismantling two core cable , detectors ,alarms,manual call points etc with all<br>accessories in surface/recess including cutting the wall of the existing smoke detector system

Supply, installation, testing and commissioning of flush mounted / semi-flush mounted Manual push button Station to initiate audio alarm resettable, conventional type complete as required.UL listed

upplying, installation, testing and commissioning of conventional Multi sensor Smoke Detector having drift compensation feature etc complete with inbuilt turbo isolator and twist lockable removal base including connections as per specifications complete as required UL listed

Supply, installation, testing and commissioning of conventional type fire alarm hooter suitable for wall/ ceiling mounting complete as required.UL listed

Supplying, installation, testing and commissioning of Main Fire alarm control panel of 12 zones capacity, with visual LED indicators for fire/ fault alarms, signals and should have stage alarm facility with maintenance free battery back up for 24 hour normal operation and 15 minutes alarm operation. The panel shall be fabricated by M.S. sheet and powder coated both inside & out side, door stall be glass fronted type with locking arrangement, as per specification.UL listed

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.1 x 1.5 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

Supply Installation, testing and commissioning of 12V 7 Ah Battery for Panel

Providing and fixing of Fire Extinguisher STORED PRESSURE ABC type fire extinguisher, ISI mark and certified , 6 kg capacity.with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal unkm discharge system, wall mounting bracket etc. complete.

Supply and installation of Co2 type fire extinguisher of 2 kg. Capacity complete with initial charges and installation brackets.

PAN PACIFIC ENGINEERING SERVICES PRIVATE LIMITED