WORK OF STOP BOARDS AND RUMBLE STRIPS ETC. UNDER ROAD SAFETY FOR PUBLIC SAFETY AT ACCIDENT PRONE PLACES ON STATE HIGHWAYS/MAJOR DISTRICT ROADS/OTHER DISTRICT ROADS AND RURAL ROADS VIDHAN SABHA-MAHSI

Road Delineator :- Providing and fixing of Standard Metal Delineator as per IRC 79-2019 consisting of minimum retro reflective unit exposed area of 330 square cm in white color, full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC 67 2012 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI table specification. The delineator shall be painted with powder coat of minimum 40 microns thickness, on top of which retro reflective sheeting shall be pasted on both sides. The structure shall be manufactured in roll forming process and shall have height not less than 800 mm above the ground, width not less than 100 mm and shall extend not more than 300mm below the ground while being installed. The front and back faces of the delineator should be curved with a radius of not more than 200 mm and with delta angle (or central angle of curve) lying between 20 degree and 30 degree, to increase the visibility of the delineator for vehicles moving in continuous curves. The delineator shall have grooves across the length to make the reflective sheets vandal-proof. ). The retro reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67:2012 & proof of the same in form of government report shall be uploaded which quoting tender. If somehow tender pre qualification condition do not ask for government report then the report shall be submitted to engineer-in-charge before finalization of bill. The delineator is meant for application on gaps in median, traffic islands, dangerous bends, roundabouts, narrow bridges etc. or as desired by site engineer.

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface.:- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes. in edges and center line.[MORTH Ref. SI No. 8-13 - 803.]

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. (Repeated / Tranvers bar) :- Providing and laying of hot applied thermoplastic compound 5 mm thick including reflectorising glass beads @ 500 gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be level, uniform and free from streaks and holes.

Reflective Raised Pavement Markers (Road Studs / Cat Eye) :- Supply and fixing of reflective raised pavement marker with its body surface made of tough ASA (Acrylic styrene Acrylonitrite) or HIPS (Hi- impact Polystyrene) or acrylonitrile butadiens styrenc (ABS). The marker shall supported a load of 1335 kg tested in accordance with ASTMD 4280 and its reflective panels shall consist of number of lenses containing single or dual prismatic cubes of providing total internal reflection of the light entering the lens face. Retro reflecting surface shall preferably be 35± 50 to base and area of each retro- reflecting surface shall not be less than 13.0 sqcm road studs shall be legibly marked with name trade mark or other means of idenfification of the manufacturer. Dimensions of road studs should not be less than 100 mm x100mm x10mm RPM (without shank) as per ASTM

Retro-reflectorised Traffic sign as per IRC-67-2012 :- providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC :67-2012 made of high intensity grade sheeting vide clause 801.3, friced over aluminium sheeting type-IV 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x45 cmx60 cm, 60 cm below ground level as per approved drawing.The retro reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67:2012 & proof of the same in form of government report shall be uploaded while quoting tender. For Pedestrian Crossing :- 90 cm equilateral tringle with diffinitation plate (20cm X 60cm)

Retro-reflectorised Traffic sign as per IRC-67-2012 :- providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC :67-2012 made of high intensity grade sheeting vide clause 801.3, friced over aluminium sheeting type-IV 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x45 cmx60 cm, 60 cm below ground level as per approved drawing.The retro reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67:2012 & proof of the same in form of government report shall be uploaded while quoting tender. For Speed Breaker :- 90 cm equilateral tringle with diffinitation plate (20cm X 60cm)

Retro-reflectorised Traffic sign as per IRC-67-2012 :- providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC :67-2012 made of high intensity grade sheeting vide clause 801.3, friced over aluminium sheeting type-IV 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x45 cmx60 cm, 60 cm below ground level as per approved drawing.The retro reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67:2012 & proof of the same in form of government report shall be uploaded while quoting tender. For Speed Limit :- 60 cm Circular with diffinitation plate (20cm X 60cm) .

Retro-reflectorised Traffic sign as per IRC-67-2012 :- providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC :67-2012 made of high intensity grade sheeting vide clause 801.3, friced over aluminium sheeting type-IV 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x45 cmx60 cm, 60 cm below ground level as per approved drawing.The retro reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67:2012 & proof of the same in form of government report shall be uploaded while quoting tender. For Stop Sign Board :- 90 cm high octagon

Retro-reflectorised Traffic sign as per IRC-67-2012 :- providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC :67-2012 made of high intensity grade sheeting vide clause 801.3, friced over aluminium sheeting type-IV 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x45 cmx60 cm, 60 cm below ground level as per approved drawing.The retro reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67:2012 & proof of the same in form of government report shall be uploaded while quoting tender. For Hazard Marker :- 30X90 cm (Left/Right) Object Hazard

Direction and place Identification signs up to 0.90 sqm size Board :- Providing and erecting direction and place identification retro-reflectorised sign as per IRC-67 made of high intensity grade sheeting The retro reflective sheeting type-IV shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67:2012 & proof of the same in form of government report shall be uploaded while quoting tender. vide clause. 801.3 fixed over aluminium sheeting ,2 mm thick with area exceeding 0.9 sqm.Supported on a miled steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60 cm.,below ground level as per approved drawing, complete. Facility Information Sings - Resting Place/First Aid Post/Toilet/Filling Station/Hospital/Poilce Station /Accident Prone Zone/ Picnic Site & etc)

Direction and place Identification signs with size more than 0.90 sqm size Board :-Providing and erecting direction and place identification retro-reflectorised sign as per IRC-67 made of high intensity grade sheeting , The retro reflective sheeting type-IV shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67:2012 & proof of the same in form of government report shall be uploaded while quoting tender. vide clause. 801.3 fixed over aluminium sheeting ,2 mm thick with area exceeding 0.9 sqm.Supported on a miled steel single angle iron post 75x75x6 mm, 2 Nos. firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60 cm.,below ground level as per approved drawing,complete. Facility Information Sings - Resting Place/First Aid Post/Toilet/Filling Station/Hospital/Poilce Station /Accident Prone Zone/ Picnic Site & etc)

Tree Plate :- S/F Reflective tree Plate having Size 15 Cm x 15 Cm, Consisting type -XI sheeting over 1.5 mm thick aluminium sheet including labour, material T&P ete for proper completion of the work .

Type - A, "W" : Metal Beam Crash Barrier :- Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810

Please Enable Macros to View BoQ information