CONSTRUCTION OF HARDCORE CELL FOR 06 NOS PRISONER, SUBEDAR ROOM AND VAKIL WAITING ROOM AT SABARMATI MAHILA JAIL AHMEDABAD. (INCLUDING ELECTRIFICATION.) (First attempt)

ITEM QUANTITY Unit RATE IN RATE IN WORD

DESCRIPTION Amount

Excavation for foundation in loose or soft soil upto 1.5 m. depth including sorting out and Rs. Two Hundred One & Paise

1 stacking of useful materials and disposing of the excavated stuff upto any Lead and lift. 450.00 CMT 201.81 Eighty One Only 90

(By Manual Labour)

Excavation for foundation in Dense or hard soil 1.5 m. to 3.0 mt depth including sorting Rs. Two Hundred Fifty Nine &

2 out and stacking of useful materials and disposing of the excavated stuff upto any Lead 243.00 CMT 259.14 Paise Fourteen Only 62

Providing and laying cement concrete 1:3:6 ( 1 cement ; 3 coarse sand; 6 crushed stone Rs. Two Thousand Nine Hundred

3 aggregates 40mm nominal size) and curing complete excluding cost of form work in 82.00 CMT 2976.00 Seventy Six Only 2 44

Foundation and plinth.

Providing and laying cement concrete 1:4:8 ( 1 cement ; 4 coarse sand; 8 crushed stone Rs. Two Thousand Six Hundred

4 aggregates 40mm nominal size) and curing complete excluding cost of form work in 62.00 CMT 2653.67 Fifty Three & Paise Sixty Seven 1 64

Foundation and plinth. Only

Rs. Three Thousand Nine Hundred

Providing and laying controlled cement concrete M.150 for curing complete excluding cost Twenty Three & Paise Twenty

5 of formwork and reinforcement for reinforced concreteworkin(A)Foundations, 63.00 CMT 3923.27 Seven Only 2 47

footings,Baseof columns and Mass concrete.Rates are Inclusive of Providing and Mixing

Plasticiser of Approved Make & In Proportion As Per Mix Design.

Providing & laying Controlled CEMENT CONCRETE M-250 and curing complete including Rs. Four Thousand Five Hundred

cost of formworkof plywood only with fair finish & proping must be of steel only so as to Ninety Five & Paise Fifty One Only

6 give a fair finish but excluding the cost of reinforcement in column FOOTING base of 95.00 CMT 4595.51 4 36

columns and Mass concrete. Rates are Inclusive of Providing and Mixing Plasticiser of

Approved Make & In Proportion As Per Mix Design.

Providing & laying Controlled CEMENT CONCRETE M-250 and curing complete including Rs. Nine Thousand Fourteen &

cost of formworkof plywood only with fair finish & proping must be of steel only so as to Paise Twelve Only

7 give a fair finishbut excluding the cost of reinforcement in column UP TO PLINTH Rates 38.00 CMT 9014.12 3 42

are Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion As Per

ITEM QUANTITY Unit RATE IN RATE IN WORD

DESCRIPTION Amount

Rs. Ten Thousand Four Hundred

Provinding and laying Controlled cement concrete M-250 and finishing smooth with curing

Four & Paise Twenty Two Only

etc. complete including the cost form work of plywood only with fair finish & proping must

8 be of steel only so as to give a fair finishbut excluding the cost of reinforcement for RCC 49.75 CMT 10404.22 5 17

work in COLUMN FOR Ground floor .Rates are Inclusive of Providing and Mixing

Plasticiser of Approved Make & In Proportion As Per Mix Design.

Provinding and laying Controlled cement concrete M-250 and finishing smooth with curing Rs. Ten Thousand Four Hundred

etc. complete including the cost form work of plywood only with fair finish & proping must Forty Four & Paise Seven Only

be of steel only so as to give a fair finishbut excluding the cost of reinforcement for RCC

work in COLUMN FOR First floor .Rates are Inclusive of Providing and Mixing Plasticiser

of Approved Make & In Proportion As Per Mix Design.

Providing and laying Controlled cement concrete M-250 and finishing smooth with curing Rs. Seven Thousand Fifty Two &

etc.. complete including the cost of formwork of plywood only with fair finish & proping must Paise Ninety Three Only

10 be of steel only so as to give a fair finish but exculding the cost of reinforcement for 83.00 CMT 7052.93 5 85

PLINTH BEAMS.Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make

& In Proportion As Per Mix Design.

Rs. Eight Thousand Seven

Providing and laying Controlled cement concrete M-250 and finishing smooth with curing

Hundred Fifty Nine & Paise Thirty

etc.. complete including the cost of formwork of plywood only with fair finish & proping must

11 be of steel only so as to give a fair finish but exculding the cost of reinforcement for 49.75 CMT 8759.31 4 35

BEAMS having any cross sectional area for GROUND FLOOR.Rates are Inclusive of

Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design

Rs. Eight Thousand Seven

Providing and laying Controlled cement concrete M-250 and finishing smooth with curing

Hundred Ninety Nine & Paise

etc.. complete including the cost of formwork of plywood only with fair finish & proping must

12 be of steel only so as to give a fair finish but exculding the cost of reinforcement for 10.00 CMT 8799.16 87

BEAMS having any cross sectional area for FIRST FLOOR.Rates are Inclusive of

Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design

Providing & laying control cement concrete M 250 including finishing smooth with curing Rs. Five Thousand Nine Hundred

complete including cost of formwork of plywood only with fair finish & proping must be of Fifty & Paise Forty Eight Only

13 steel only so as to give a fair finishbut excluding the cost of reinforcement in COPING 23.00 CMT 5950.48 1 36

Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make & In Proportion

As Per Mix Desig

Rs. Four Thousand Forty Two &

Providing and laying Controlled cement concrete M-200 and finishing smooth with curing

Paise Twenty Nine Only

etc.. complete EXCLUDING the cost of formwork with fair finish & proping must be of steel

14 only so as to give a fair finish but exculding the cost of reinforcement for GRID SLAB 51.00 CMT 4042.29 2 06

having any cross sectional area for FOUNDATION AND PLINTH.Rates are Inclusive of

Providing and Mixing Plasticiser of Approved Make & In Proportion As Per Mix Design

ITEM QUANTITY Unit RATE IN RATE IN WORD

DESCRIPTION Amount

Rs. Eight Thousand One Hundred

Provinding and Laying controlled cement concrete M-250 Finishing smooth with curing

Twenty Six & Paise Fifty Only

etc.comp including the cost of formwork of plywood only with fair finish & proping must be

of steel only so as to give a fair finish but excluding the cost of reinforcement for RCC work

in SLAB having thickness of 10cm upto 13cm for Ground floor

Rs. Eight Thousand One Hundred

Provinding and Laying controlled cement concrete M-250 Finishing smooth with curing

Sixty Six & Paise Thirty Five Only

etc.comp including the cost of formwork of plywood only with fair finish & proping must be

of steel only so as to give a fair finish but excluding the cost of reinforcement for RCC work

in SLAB having thickness of 10cm upto 13cm for First floor

Provinding and Laying controlled cement concrete M-250 and with curing etc.complete. Rs. Eight Thousand Four Hundred

Including the cost of formwork of plywood only with fair finish & proping must be of steel Forty Eight & Paise Eighty Seven

only so as to give a fair finish but excluding the cost of reinforcement for R.C.C work in Only

Lintel. At Ground floor

Provinding and Laying controlled cement concrete M-250 for reinforced conerete Rs. Nine Thousand Four Hundred

CHHAJJAS not exceeding 10cm thickness up to floor two level including finishing the Thirty Six & Paise Nine Only

18 exposed surface with cement mortar 1:3 ( 1 cement : 3 fine sand) to give a smooth surface 5.00 CMT 9436.09 47

,centering and formwork and curing complete. excluding cost of reinforcement for ALL

Provinding and Laying controlled cement concrete M-250 and with curing etc.complete. Rs. Nine Thousand Five Hundred

including cost of formwork of plywood only with fair finish & proping must be of steel only Fifty Five & Paise Forty Only

so as to give a fair finish but excluding the cost of reinforcement for R.C.C work in

WALLS heving any cross section area of Wall

Provinding and Laying controlled cement concrete M-200 and with curing etc.complete. Rs. Nine Thousand Five Hundred

including cost of formwork of plywood only with fair finish & proping must be of steel only Sixteen & Paise Twelve Only

20 so as to give a fair finish but excluding the cost of reinforcement for R.C.C work in 25.00 CMT 9516.12 2 37

WALLS heving any cross section area of Wall FOR ANY HEIGHT FLOOR

BRICK WORK using common burnt clay building bricks having crushing strength not less Rs. Three Thousand Nine Hundred

21 than 35 Kgs. / Sq. cm. In FOUNDATION AND PLINTH LEVEL Conventional bricks in 136.00 CMT 3981.21 Eighty One & Paise Twenty One 5 41

Cement Mortar (1:6) (1 Cement : 6 coarse sand) Only

Filling avaliable excavate earth ( excluding rock). In trenches, plinth sides of foundations Rs. One Hundred Twenty Nine &

22 etc. in layers not exceeding 20 cms. In depth consolidation each deposited layer by 626.00 CMT 129.10 Paise Ten Only 80

ramming and watering.

Filling In Foundation & Plinth With Murrum Or Selected Soil In Layers Of 20Cms Th. Rs. Two Hundred Eighty Six &

Inclu.. Watering , Ramming & Consolidating Etc.. Complete Paise Twenty Only

FILLING in plinth with SAND under floors including watering, raming consolidating and Rs. Four Hundred Fifty Five &

dressing etc. complete. Paise Sixty Three Only

Rs. Eighty Eight & Paise Forty Only

Applying general insecticide pest control treatment to floors, cupboards etc including labour

material etc. complete. Using Imidacloprid 30.5 SCas as Per 6313part -II (0.075 %

concentration by mass) is recommended 10.5 ml chemical diluted with 5 litres of water

application 0.5 litre chemical/Sqm if surface is recommended as per I.S.

ITEM QUANTITY Unit RATE IN RATE IN WORD

DESCRIPTION Amount

Providing T.M.T. Fe-500D Steel reinforcement for RCC work including cutting, bending, Rs. Seventy Five & Paise Forty Six

binding and placing in position etc. complete for all floors. Only

Brick work using common burnt clay building bricks having crushing strength not less than Rs. Four Thousand Two Hundred

27 35 Kg/Sq.cm.in superstructure above plinth up to floor two level in conventional bricks in 524.00 CMT 4253.46 Fifty Three & Paise Forty Six Only 22 28

cement mortar 1:6(1-cement;6-fine sand) for Ground Floor.

Brick work using common burnt clay building bricks having crushing strength not less than Rs. Four Thousand Two Hundred

28 35 Kg/Sq.cm.in superstructure above plinth up to floor two level in conventional bricks in 65.00 CMT 4293.25 Ninety Three & Paise Twenty Five 2 79

cement mortar 1:6(1-cement;6-fine sand) for First Floor. Only

HALF BRICK masonary in common brunt clay building bricks having crusing strength NOt Rs. Six Hundred Forty Six & Paise

29 less than 35 kg./sq.cm.in cement mortar 1:4 (1 cement : 4 coarse sand ) (conventional 45.00 SMT 646.70 Seventy Only 29

bricks for GROUND FLOOR)

Provinding 10 mm thick cement PLASTER in single coat on CEILING for interior plastering Rs. One Hundred Ninety Nine &

30 and finished even and smooth in C.M. 1:3 ( 1 cement : 3 sand ) including finishing with 259.00 SMT 199.88 Paise Eighty Eight Only 51

floating coat of neat cement at Ground Floor.

Provinding 10 mm thick cement PLASTER in single coat on CEILING for interior plastering Rs. Two Hundred Twenty Five &

31 and finished even and smooth in C.M. 1:3 ( 1 cement : 3 sand ) including finishing with 88.00 SMT 225.69 Paise Sixty Nine Only 19

floating coat of neat cement at First Floor.

Rs. Two Hundred Three & Paise

Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall

Thirty Four Only

32 for interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) 1080.00 SMT 203.34 2 19

including finishing with floating coat of neat cement slurry at GROUND FLOOR.

Rs. Two Hundred Thirty One &

Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall

Paise Twenty Only

33 for interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) 166.00 SMT 231.20 38

including finishing with floating coat of neat cement slurry at FIRST FLOOR.

Provinding 20 mm thick SAND FACED cement PLASTER on walls above ground level Rs. Two Hundred Ninety Seven &

consisting 12 mm thick backing coat of C.M. 1: 3 ( 1 cement : 3 sand ) and 8mm thock Paise Sixty Eight Only

finishing coat of C.M. 1:1 ( 1 cement : 1 sand ) etc. Complete for any height.

Providing CEMENT VATA ( 10cm x 10cm )size quarter round in cement mortar 1 : 1 Rs. Twenty Three & Paise Forty

including neat cement finishing, watering etc. Complete. Five Only

Synthetic Texture Plaster with Double Coat Smooth plaster : Providing 20mm thick cement Rs. Four Hundred Sixty Three &

plaster in single coat plastering upto for Outside and finished even and smooth in (i) Paise Twenty Six Only

Cement mortar 1:3 (1-cement : 3-sand) as Base Coat and providing 2-3 mm thick

36 synthetic texture plaster of approved texture including cost of all rate are materials, labour, 894.00 SMT 463.26 4 14

conveyance, loading and unloading, taxes, royalties, scaffolding, watering etc.complete for

any Height as per Drawing and instructions of Engineer -in -Charge.(Material Shall be Used

as Approved By GSPHCL Only )

ITEM QUANTITY Unit RATE IN RATE IN WORD

DESCRIPTION Amount

Providing and fixing Alluminium section window having extruded Aluminum Colour Rs. One Thousand Nine Hundred

anodized section frame, horizontal Three track member size 92mm x 31.75mm x Two & Paise Fifty Only

1.30mm,@ Wt. 1.07 Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm ,@ Wt.

1.06 Kg/mt) with sliding shutters of horizontal member size 40 mmx18mm x1.29mm ,@

37 wtof 0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm ,@ wt.of 0.456Kg/mt/ 9.00 SMT 1902.50 17

with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant glass fixing to frame as per details

including one mosquitoe jali shutter With Both Side Locking Arrangment.

Providing and fixing standard extruded of alluminium section of size 63 * 38.10 * 1.2 Rs. One Thousand One Hundred

38 mm,@Wt 0.643 Kg/RMT )with colour aNOdized alluminium frame for ventilation with 5 mm 4.00 SMT 1163.92 Sixty Three & Paise Ninety Two 4

thick frosted glass as details etc complete FOR VENTILATION Only

Providing, Supplying and Fixing of 32mm (Total) Thick Single Flush Door Shutter with Rs. Eight Thousand Nine Hundred

1mm Thick Laminates on Both Side of Shutter. Making / Construction of Flush Door is with Seventy Six & Paise Forty One

Pine or southern Yellow Pine Filler and 2.5mm core veneer Both Side and 0.4mm Face Only

Veneer on Both Side with Lock rail on Center. Flush Door Provide with Teak wood beading

patti (32mm X 12mm) on Peripheries of Flush Door with Door Frame of Non Teak Solid

Wood of size 120mm x 65mm with Chemically Treated and Seasoned Including Paint

39 Matching with Laminates. Frame & Flush door shutter having 5 year warranty against 9.00 SMT 8976.41 80

attack of biological agent like termite, borers, decay, fungi and harmful insects also

warranty against seasoning related issues like crack, bending, twisting, warping. Laminates

on shutter shall be press by cold press method. Shutter shall be brought to site in packed

PVC bags & pvc coating shall be removed on completion of work in such a way that shutter

& Frame is free from nail mark & any damages etc.

Rs. Four Thousand Five Hundred

Providing and fixing Solid PVC Flush Door Shutters 24mm thick made fro Co- Extruded

THREE LAYER RIGID PVC Foam Sheet (Single extruded) with density not less than

Kg / cbm. Outer Layer (0.8-1mm) thick should be of Rigid PVC with Density not less than

1400 kg/cbm including Providing & Fixing WPC Door Frame Uperline Patti of 24mm x 6mm

40 Size. Door should be Water proof, Termite proof, Fire Retardant & having good screw 18.00 SMT 4513.00 81

holding capacity. Providing & Fixing 100% Solid Wood Plastic Composit (WPC) Door

Frame 90mm x 45mm made from Wood Plastic Composite (Single extruded Process)

material with dencity 780kg / cbm All as per specifications & drawings etc. complete as per

direction of Engineer-in-charge, .

Providing, erecting, fabricating the M.S. structure as per requirement of site as per Rs. Seventy Four & Paise Ninety

structure design Including proper size approved by EIC of M.S. angles, flats, bars, square Two Only

pipe, channels, sections (Tata,Zindal,Asian,Jsi Make) complete with cutting, welding,

grinding and finishing duly painted with Asian/Nerolac make premium quality oil paint and

true care red oxide metal primer,asian paint make with erection on site as per direction of

engineer in charge with necessary grouting cementing, plastering and finishing complete.

All hole opening of square pipe end must be closed with M.S plate welding. Payment will

be done on KG as per Actual weight.

ITEM QUANTITY Unit RATE IN RATE IN WORD

DESCRIPTION Amount

Rs. Four Thousand One Hundred

S.S. Railing Providing and fixing of stainless steel 304 grade pipe railing 0.90m height.

Thirty & Paise Thirty Four Only

Top round pipe (Baluster) of 2" dia. Vertical balustrade 1.5" x 1.5" at every max. 0.90m

c/c and intermediate 4 nos. runners pipe midrail of 1" dia and SS base plate of 100 x 8mm.

The railing system shall be floor mounted with anchor fastener and base plate of 100mm

size having 8mm thickness completed as per detailed drawing & as directed by engineer in

charge. Rate are inclusive of all material, labour, taxes & polishing.

Rs. Eight Hundred Fifty Five &

Providing & Laying integrated cement based proprietary water proofing treatment of

Paise Eleven Only

required thickness over the roof including 10mm thick cement mortar 1:3 and CHINA

MOSAIC fitting and finally finishing the surface with white cement slurry and sloping out

terrace slabs withFollowing specification laid to required slope not flatter than 1:80 ( the

43 thickness of water proofing treatment near rainwater outlet or the lowest point of the 391.00 SMT 855.11 3 34

finished slope shell not to be less than 45 mm. Including treating the vertical surface of the

parapet wall up to 20 cm. height above finished level of terracing including finishing top

with joint less water proofing plaster curing testing etc, completed.

Rate is Including 10 years performance of guarantee bond to be given on stamp paper ( no

extra shall be paid for increase in thickness for proper slope ). (A) Applying & grounting a

slurry coat of neat cement using 2.75 kg/smt. of cement admixed with proprietary water

proofing compound confirming to IS 2645 and 10mm. Thick water proofing cement plaster

in cement mortar in 1:3.over the RCC slab including cleaning the surface before

treatments. (B) Laying cement concrete using broken brick bat using 25 mm to 40 mm size

with 50% of cement mortar 1:4 ( 1 cement : 4 corse sand )over 10mm. thick water proofing

cement plaster in cement mortar in 1:3 admixed with proprietary water proofing compound

conforming to IS 2645 required slope and treating similarly the adjoining walls up to

mm height including rounding of junction of walls.

(C) After two days of proper curing applying a second coat of cement slurry .(D) Finishing

the surface with china mosaic peices laid on 10 mm thick joint less cement mortar of mix

1:3 ( 1 cement : 3 sand) admixed with proprietary water proofing compound confirming to

IS 2645 and finally finishing the surface with trowel

with neat cement slurry .(E) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing for final test. All above operation to be done in

order and as directed and specified by the engineer in charge

Providing and laying 24" x 24" Double Charge vitrified 8 to 10 mm thick tile flooring over 20 Rs. One Thousand Four Hundred

mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new Forty & Paise Twenty Only

surface orfixing on existing flooring by adhesive including dismentaling of existing flooring

and material jointed with color cement slurry including finised with flush pointing

& cleaning the surface etc. complete for light shade

ITEM QUANTITY Unit RATE IN RATE IN WORD

DESCRIPTION Amount

Providing and laying 24" x 24" Double Charge vitrified 8 to 10 mm thick tile for Rs. One Thousand Three Hundred

skirting,risers of steps and dedo over 20 mm (average) base of cement mortar 1:6 ( 1 Ninety Two & Paise Twenty Only

cement: 6 coarse sand) on new surface orfixing on existing flooring by adhesive including

dismentaling of existing flooring and material jointed with color cement slurry including

finised with flush pointing & cleaning the surface etc. complete for light shade

Providing and laying Anti skid Ceramic tiles (Non Skiding) 8 mm to 10mm thick in Rs. Nine Hundred Sixty & Paise

Floorings, treads of steps and landing laid on a bed of 20 mm thick cement mortar 1:3 (1 - Forty Seven Only

46 cement: 3- coarse sand) finished with flush pointing in the colour as specified etc. complete 39.00 SMT 960.47 37

in white cement for All Floors. Size and shade shall be as per the instruction of Engineer -

Provinding & laying Coloured GLAZED TILES 8 mm to 10 mm thick in skirting, risers of Rs. One Thousand Four Hundred

steps and DADO on 10mm thick cement plaster 1: 3 ( 1 cement : 3 coarse sand ) finishing Twenty Six & Paise Ninety Five

47 with flush pointing in the colour as specified etc.completion white cement for all floors size 145.00 SMT 1426.95 Only 2 06

and shape shall be as per the instruction of engg.incharge the tile size shall be 600 mm x

Provinding and Laying 18 mm thick Granite Stone Slab Flooring over 20mm thick average Rs. Two Thousand One Hundred

48 base of C.M. 1:6 (1cement : 6 coarse sand) laid and jointed with grey cement slury 23.00 SMT 2131.98 Thirty One & Paise Ninety Eight 49

including Rubbing and Polishing etc. Complete for All Floors. Only

Provinding and Laying 18 mm thick Granite stone slab in Skirting / Dado over 10mm thick Rs. Two Thousand Three Hundred

49 average base of C.M. 1:3 (1:cement :3 coarse sand) laid and jointed with grey cement slury 8.00 SMT 2325.18 Twenty Five & Paise Eighteen Only 18

including Rubbing and Polishing etc. Complete for All Floors.

Providing and Fixing Granite Telephonic Black Colour 15 to 18mm thick for jambs and sills Rs. Two Thousand Four Hundred

of doors & windows using neat cement slurry laid over 20 mm average base of cement Twenty Eight Only

mortar 1:1(1 cement:1 Coarse Sand) and jointed with grey cement slurry including

racking(Tancha Work) rubbing and polishing,scaffoldings,tools and tackles,scaffolding etc.

complete(with base of neat cement) as per direction of Engineer in charge including

rounding the exposed edges as directed.

MOULDING OF KOTA STONE/GRANITE STAIR TRADE COMPLETE AS PER Rs. One Hundred Twenty Nine &

DIRECTION OF ENGINEER IN CHARGE Paise Ninety Five Only

PROVIDING 3 NOS GROOVE 3 MM X 3 MM DEEP IN TOTAL LENGTH OF STAIRCASE Rs. Eighty Two & Paise Eighty Only

TREAD OF SIZE 10MM*10MM FINISHED SMOOTH IN PARALLEL LINE , EQUALLY

SPACED AS PER DIRECTION OF ENGINEER IN-CHARGE IN ALL TYPE OF FLOORING

, ETC. COMPLETE

Finishing Ceilling/Slop Surface with Plastic Emulsion Paint on Ceilling/Slop Surface (two Rs. One Hundred Eighty Six &

coats) to give an required shap even shade after throughly brushing the surface to remove Paise Seventy Three Only

all dirt and remains of loose poweder material etc. complete. Rate are inclusive of applying

53 two coat of lapy (Putty) and one coat of primer on new Ceilling/Slop Surface to give and 347.00 SMT 186.73 64

even shade including thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth. putty , primer and paint make as per the

approved list of GSPHCL.

ITEM QUANTITY Unit RATE IN RATE IN WORD

DESCRIPTION Amount

Rs. One Hundred Seventy Six &

Finishing Wall with Plastic Emulsion Paint on Wall Surface (two coats) to give an required

Paise Thirty Three Only

shap even shade after throughly brushing the surface to remove all dirt and remains of

loose poweder material etc. complete. Rate are inclusive of applying two coat of lapy

(Putty) and one coat of primer on new wall surface to give and even shade including

thoroughly brushing the surface free from mortar dropping and other foreign matter and

sand papered smooth. putty , primer and paint make as per the approved list of GSPHCL.

Rs. One Hundred Forty Seven &

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) over

Paise Sixty Eight Only

and above applying One Coat Of Primer to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of loose powdered

materials.etc complete. primer and paint make as per the approved list of GSPHCL

Rs. Sixty Four & Paise Six Only

Providing and fixing chicken wire mesh jali of 20 guage with necessary screws and nails at

56 joints or crackes of brick work or RCC work, as per drawing, spicification and direction of 230.00 SMT 64.06 14

Engineer in charge.wire-mesh jali shall confirm to relevant IS specification

Painting Numbers or name on Acrylic plate Size 750 mm x 450 mm as Directed by Rs. One Thousand Five Hundred

Engineer in Charge. Only

Painting Numbers or name on Acrylic plate Size 180 mm x 40 mm as Directed by Engineer Rs. One Hundred Twenty Five Only

Providing I.S.I. Mark 7 levers three keys brass pad lock of Navtal (Godrej) make 65mm dia Rs. Two Hundred Eleven & Paise

on completion of project. Eighty Six Only

Provinding and fixing water Closet Squatting (ORRISSA TYPE W.C. PAN ) size 580mm Rs. One Thousand Three Hundred

60 first quality including necessary "P" or "S" trap, including jointing the trap with pan & soil 6.00 NO 1321.52 Twenty One & Paise Fifty Two Only 7

pipe in viterous chine white colour, Joints shall be pipe sealent.

Providing & Fixing Wall Hung with PVC Flush Tank, Soft Seat Cover & intergal "P" or "S" Rs. Five Thousand Four Hundred

Trap including Jointing the Trap with Pan and Soil pipe. Wall hung shall be fixed on S.S Seventy & Paise Ninety Only

heavy duty rack bolt having 16mm dia, 165mm length using Plastic sleeve Make by Using

61 Drill Bitt Only. Rate are inclusive of all materials, Labour & Necessary Fittings etc. 3.00 NO 5470.90 16

Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer

In charge. The Model & Make of Wall Hung & Flush Tank Shall be as per the Approved

Make List of GSPHCL.

Rs. Four Hundred Ninety Five &

Providing and fixing to wall, ceiling and floor SWR/UPVC soil waste pipe 110 mm dia. Of

Paise Ninety One Only

ISI13592/92 . Rate inclusive of all fittings like single or double 'Y' with door,

62 reducer, coupler single T with door bend, pipe clip on z patti etc. complete and making 60.00 RMT 495.91 29

good the wall, ceiling and Floor. Including Z-patti G.I Sloated Min 1.6 Mm Thick

Rs. Two Hundred Sixty Four &

Providing and fixing to wall, ceiling and floor SWR/UPVC soil waste pipe 75 mm dia. Of

Paise Ninety Seven Only

ISI13592/92 . Rate inclusive of all fittings like single or double 'Y' with door,

63 reducer, coupler single T with door bend, pipe clip on z patti etc. complete and making 77.00 RMT 264.97 20

good the wall, ceiling and Floor. Including Z-patti G.I Sloated Min 1.6 Mm Thick

ITEM QUANTITY Unit RATE IN RATE IN WORD

DESCRIPTION Amount

Rs. Sixteen & Paise Forty Seven

64 Providing and fixing in position UPVC/SWR cowel vent to pipe 75mm dia as directed. 10.00 NO 16.47

Rs. Twenty Eight & Paise Sixteen

65 Providing and fixing in position UPVC/SWR cowel vent to pipe 110mm dia as directed. 9.00 NO 28.16

Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm. length. Rs. One Hundred & Paise Ninety

Providing & Fixing to Wall Ceilling and Floor SWR (Type B) Rain Water pipe as Per IS- Rs. Three Hundred Twenty Three &

13592 of 90mm Dia. Complete with Special Flings, vent cowl, Compressor type Paise Fifteen Only

Fittings like G.I. Slotted Z patti of 16 Gauge (minimum1.60mm thick) and minimum 6mm

dia. U Clamp with Washer Nut at every 1.50mt. vertical distance including All Labour

Charges etc. complete including making good the Ceilings, Floors and on terrace. Rain

water pipe shall be 90 mm Dia. SWR horizontal pipe and vertical pipe and 90mm bend at

the end near by Ground level. Rate are Inclusive of all Necessary Fittings required for ALL

Rs. Two Hundred Two & Paise

Providing and Fixing concealed centre point to wall ceiling and floor CPVC ( SDR 13.5)

Ninety Seven Only

poipe having National sanitation foundation ( NSF) seal for potable water of following dia.

68 Nominal bore tube fittings and clamps including, making good the wall,ceiling and floor etc 40.00 RMT 202.97 8

complete. Pipe shall be concealed or open as per mentioned in tender description. Pipe

shall be approved make of GSPHCL list (20 mm inside dia)

Rs. Two Hundred Forty Seven &

Providing and Fixing concealed centre point to wall ceiling and floor CPVC ( SDR 13.5)

Paise Twenty Five Only

poipe having National sanitation foundation ( NSF) seal for potable water of following dia.

69 Nominal bore tube fittings and clamps including, making good the wall,ceiling and floor etc 39.00 RMT 247.25 9

complete. Pipe shall be concealed or open as per mentioned in tender description. Pipe

shall be approved make of GSPHCL list (25 mm inside dia).

Providing and fixing concealed or open center point to wall ceiling & floor CPVC (SDR Rs. Three Hundred Thirty & Paise

13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following Thirty Six Only

dia. nominal bore tube fittingswith Z patti (Minimum 1.6mm thick) with 6mm Dia U Clamp

with washer for Vertical water supply pipe. Pipe shall be concealed or open as mention in

tender description. Pipe shall be as per approved make of GSPHCL make list (32 mm

Providing and fixing concealed or open center point to wall ceiling & floor CPVC (SDR 437.66 Rs. Four Hundred Thirty Seven &

13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following Paise Sixty Six Only

dia. nominal bore tube fittingswith Z patti (Minimum 1.6mm thick) with 6mm Dia U Clamp

with washer for Vertical water supply pipe. Pipe shall be concealed or open as mention in

tender description. Pipe shall be as per approved make of GSPHCL make list (40 mm

ITEM QUANTITY Unit RATE IN RATE IN WORD

DESCRIPTION Amount

Rs. Two Hundred Twenty Nine

Providing, supplying and Fixing Corrugated DWC HDPE Pipes of Class SN8 Structured

Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing

ring) with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double

Wall) for non-pressure underground Sewerage & Drainage application as per EN:13476-3

including all transportation, freight charges, octroi, inspection charges, loading, unloading,

conveyance etc. complete. (100mm ID Dia) Including Lowering, laying and jointing of class

SN 8 structured wall ( External Annular Corrugated & Smooth Internal surface)

72 Polyethylene Piping and fittings with the help of coupler ( on line / off line ) attached with 75.00 RMT 229.00 17

one end of pipes, sliding over the elastomeric sealing rubber ring placed on the specified

valley of the corrugation at the spigot end, lowering the same into the trench, laying on the

lower bedding (constructed at bottom of trenches) at prescribed gradient,depth & alignment

,testing the water tightness of the joints, ensuring the continuity tests of specified pipe

segments etc. complete as per drawing,specifications & detailed engineering, including

carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of

Engineer-in-charge

Rs. Three Hundred Ninety Six Only

Providing, supplying and fixing Corrugated DWC HDPE Pipes of Class SN8 Structured

Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing

ring) with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double

Wall) for non-pressure underground Sewerage & Drainage application as per EN:13476-3

including all transportation, freight charges, octroi, inspection charges, loading, unloading,

conveyance etc. complete. (150 mm ID Dia) Including Lowering, laying and jointing of

class SN 8 structured wall ( External Annular Corrugated & Smooth Internal surface)

73 Polyethylene Piping and fittings with the help of coupler ( on line / off line ) attached with 180.00 RMT 396.00 71

one end of pipes, sliding over the elastomeric sealing rubber ring placed on the specified

valley of the corrugation at the spigot end, lowering the same into the trench, laying on the

lower bedding (constructed at bottom of trenches) at prescribed gradient,depth & alignment

,testing the water tightness of the joints, ensuring the continuity tests of specified pipe

segments etc. complete as per drawing,specifications & detailed engineering, including

carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of

Engineer-in-charge

Rs. Six Hundred Fifty Six & Paise

Provinding and fixing gun metal check or non return full way WHEEL / HANDLE VALVE

Eighty Six Only

mm dia. Rate are inclusive of all materials, Labour & Necessary Fittings etc. Complete as

per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. All

material used as per approved make list by GSPHCL. 40 mm dia.

Providing & Fixing 15mm One way Bib Tap with WAll Flange. Rate are inclusive of All Rs. Nine Hundred Ninety & Paise

matreials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Sixty One Only

Specifications and as per the Instruction of Engineer In charge. The Model & Make of Bib

Tap ShAll be as per the Approved Make List of GSPHCL.

ITEM QUANTITY Unit RATE IN RATE IN WORD

DESCRIPTION Amount

Providing & Fixing Single Hole Wash Basin with C.I or M.S. brackete & M. I. fisher union, Rs. Three Thousand Nine Hundred

P.V.C water pipe with Connection from Stop Cock to Pillar Tap, PVC Bottle Trap with Thirty Five & Paise Thirty Three

Connection 32mm dia. C.P. brassa waste coupling etc. Complete. Rate are inclusive of all Only

76 matreials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings, 3.00 NO 3935.33 11

Specifications and as per the Instruction of Engineer In charge. The Model & Make of

Wash Basin Shall be as per the Approved Make List of GSPHCL. including pillar cock,

angel cock, bottale trap

Providing & Fixing Towel Rod. Rate are inclusive of all materials, Labour & Necessary Rs. One Thousand Seventy Eight &

Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction Paise Seventy Only

of Engineer In charge. The Model & Make of Towel Rod Shall be as per the Approved

Make List of GSPHCL

Providing & Fixing Towel Ring. Rate are inclusive of all materials, Labour & Necessary Rs. Nine Hundred Nine & Paise

Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction Eight Only

of Engineer In charge. The Model & Make of Towel Ring Shall be as per the Approved

Make List of GSPHC

Provinding and fixing 600mm x 450mm bevelled edge MIRROR or superior glass mounted Rs. Eight Hundred Twenty Five &

79 on 6mm thick A.C. sheet of plywood sheet fixed to wooden plugs with C.P. brass screws & 3.00 NO 825.48 Paise Forty Eight Only 2

Rs. One Thousand One Hundred

Providing & fixing PVC SWR MULTY NANHI TRAP IS:14735 for drain -100mm dia. With

Twenty Two & Paise Twenty Six

jali of following nominal dia. of self cleansing design with C.I. Screwed down or Hinged

grating including the cost of cutting and making good the walls. Providing & Fixing Floor

drain jali (Glossy Finish) (on N.T.) of 6" X 6"size made of Stainless Steel Grade 304 Floor

Drain 3 Piece (Cover/Jali/Grating) With Anti Cockroach Bowl on N.T. Rate are inclusive of

all necessary fittings, material, labour etc.complete as per direction of Engineer In charge.

Providing and fixing S.W. Gully trap with C.I. grating brick masonry chamber & water-tight Rs. One Thousand One Hundred

81 C.I. cover with frame of 300mm x 300mm size (inside) with standard weight. [I] Square 10.00 NO 1176.94 Seventy Six & Paise Ninety Four 11

mouth trap (B) 150mm x 100mm size P or R type. Only

Rs. Three Thousand Seven

Construction of BRICK MASONRY CHAMBER for under Ground C.I. inspection chamber Hundred Ninety Three & Paise

and bends with bricks having crushing strength not less than 35 Kg / Cm2 in Eighteen Only

Cement Mortar (1:5) with RCC top slab with CC (1:2:4) mix ( 1 cement : 2 corse sand :

gradded aggregate 20 mm nominal size) with 8mm. dia. TMT steel at 15 cm. c/c

both ways & providing and fixing precast r.c.c cover size .60 x .45 x .07 mt. with angle

82 frame fixed with C.C (1:2:4) Foundation concrete 1:5:10, inside plaster 15 mm thick 22.00 NO 3793.18 83

with C:M (1:3) finished smooth with a floating coat of neat cement slurry on walls &

bedconcrete etc, complete. Inside dimension of chamber 455 mm x 610 mm x 450 mm

deep for match proposed pipe line. Rate are also inclusive of out side plaster 15mm. th. in

c:m 1:3 from top of the chamber & all side up to 15 mm. deep below ground

Extra above item for addi. depth 0.10 mt. or part three of beyond 450 mm depth for brick Rs. Two Hundred Thirty Nine &

masonry chamber 455 mm x 610 mm. Paise Ninety Nine Only

ITEM QUANTITY Unit RATE IN RATE IN WORD

DESCRIPTION Amount

Rs. Three & Paise Ninety One Only

Providing and fixing in position PVC water tank of approved quality and size on terrace

including making inlet and outlet, over flow and washout arrangement with G.I. Connection

84 including using necessary material and labour for connection etc. complete with closed 8000.00 LITER 3.91 31

cover as per drawing and specification. Rate inclusive of Providing & applying two coats of

oil paint on outside of water tank Joint shall be sealted by Pipe sealent.

Dismentaling RCC work including stacking of serviceable materilas and disposal of Rs. One Thousand Forty Seven &

unserviceable materials with all lead and lift. Paise Thirty Eight Only

Providing & Fixing Urinal with P.V.C water pipe, 32mm dia. C.P. brassa waste coupling Rs. Two Thousand Ninety Eight &

with Connection 32mm dia waste Pipe etc. Complete. Rate are inclusive of all materials, Paise Ninety Eight Only

86 Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and 2.00 NO 2098.98 4

as per the Instruction of Engineer In charge. The Model & Make of Urinal Shall be as per

the Approved Make List of GSPHCL

Providing and fixing both side polished machine cut Granite Shelves / Partitions 18mm Rs. Two Thousand One Hundred

thick embaded in to wall at support including racking and finishing smooth the surface Fifteen & Paise Forty Only

including cutting the stone as and where required etc. complete including rounding of

exposed edges etc. complete.

Provding and fixing pre-cast Rubber Dye/Steel dye inter locking concrete block 60 mm Rs. Six Hundred Eighty & Paise

thick with grade of concrete M-300 pnumatic compressed/vibrated mechanically and as per Ten Only

88 approved design Comfirming to IS 15658:2006 including 35 mm Sand layer for levelling 46.00 SMT 680.10 31

and filling the joint with sand in proper line and level as per guidelines IRC : SP 63-2018

Providing and fixing Precast Concrete Kerb Stone of Grey Cement Based Concrete Block Rs. Three Hundred Fifty Eight &

size of 30 cm Length, 30 cm Height and 15 cm thick of M-250 Grade Concrete as per Paise Six Only

approved design and Including Excavation For Fixing In proper Line And Level, Filling The

Joint C:M 1:3 (1 Cement : 3 Fine Sand) etc. Complete.

Providing laying and fixing 25 mm thick expansion joint by hydro cell semi rigid UV Rs. Seven Hundred Thirty Eight &

90 resistance with high performance laminated closed cell polythene foam joint filler in sheet 8.00 SMT 738.13 Paise Thirteen Only 5

foam as directed, etc. complte.

Box cutting the road surface to proper slope and camber for making a base for road work Rs. One Hundred One & Paise

91 including removing the excavated stuff and disposing on the road side slope as directed up 39.00 CMT 101.91 Ninety One Only 3

Construction of Granular Sub base by Providing Couarse graded material Spreading in Rs. One Thousand Four Hundred

uniform Layers With motor grader on prepared surface mixing by mix in place method with Forty One & Paise Twenty Eight

rotavator at OMC and Compacting with Vibratory roller to achieve the desired density Only

complete as per table 400-2

Suppliying of graded stone aggregate of following sizes (for W.B.M. Road) ( 3) Crushed Rs. Eight Hundred Twenty Six &

stone aggregate for Hard Quality up to 63 mm stze Paise Twenty One Only

Spreading the stone aggregate for rolling and W.B.M. including filling the interstices to Rs. Two Hundred Forty Seven &

94 required camber and gradient (excluding spreading of Blindage) (ii) 40mm to 63mm size 9.00 CMT 247.28 Paise Twenty Eight Only 2

aggreagates (H.B.)

Supplying of murum on W.B.M surface etc. complete Rs. Two Hundred Ninety Two &

95 11.00 CMT 292.40 Paise Forty Only 3

ITEM QUANTITY Unit RATE IN RATE IN WORD

DESCRIPTION Amount

Spreding blidage or road crust filling the gaps in metal and leveling to cambert and gradient Rs. One Hundred Forty Six & Paise

as directed .(i)Murrum One Only

Rolling & consolidation water bound macadam (except laterite and kankar) including Rs. Twenty & Paise Seventy Nine

watering not exceeding 150mm thk. (Main layer incl. binding materials) includining filling in Only

depression which occurs during the process. (A)with Power roller exceeding 8 tonne and

not exceeding 12 tonne.

Providing and Laying Controlled Cement Concrete M-300 and curing complete. Including Rs. Four Thousand Five Hundred

the cost of formwork and excluding the cost of Reinforcement for Foundation and Plinth Twenty Six & Paise Twenty Four

for Trimix ROAD Only

Providing Groove cutting in C.C. Road incluing cleaning etc.complete as per direction of Rs. Thirty Six & Paise Eighty Only

99 Engineer incharge 60.00 RMT 36.80 2

Providing & Laying sand & Bitumine filler in joints 10 & 25 mm Rs. Eleven & Paise Fifty Only

Dismentaling of Brick Work including stacking of serviceable materilas and disposal of Rs. Five Hundred Forty Four &

101 unserviceable materials with all lead and lift. 30.00 CMT 544.95 Paise Ninety Five Only 16

Dismentaling of G.I Sheet Carefully dismantling and removing existing G.I. ( Galvanized Rs. Forty Seven & Paise Twenty

iron ) sheet roofing/cladding of any profile, thickness and size including removing existing Five Only

accessories, carefully lowering the dismantled sheet and materials from the existing

structure without causing damage to adjoining structural members or property sorting and

102 stacking serviceable materials at the location directed by the Engineer-in-charge and 155.00 SMT 47.25 7

removing and disposing of unserviceable materials/debris to an approved location including

necessary scaffolding safety arragements labour etc. complete as directed by the Engineer

Dismentaling of Existing M.S Grill Carefully dismantling and removing existing M.S Rs. Three & Paise Sixty Three Only

grill/grill work of any size and pattern including cutting/ removing existing welded or fixed

arrangments without causing unnecessary damage to adjoining masonry,RCC Plaster or

other finished surfaces, including lowering, sorting and stacking the accessories, carefully

lowering the dismantled sheet and materials from the existing structure without causing

damage to adjoining structural members or property sorting and stacking the dismantled

serviceable material at the place directed by the Engineer-in-charge and disposing of

unserviceable materials/debris complete with all labour safety arragements etc. complete

as directed by the Engineer in charge

Dismentaling tiledof stone floors laid inmortar including stacking of serviceable materilas Rs. Forty Seven & Paise Twenty

104 and disposal of unserviceable materials with all lead and lift. 208.00 SMT 47.25 Five Only 9

ITEM QUANTITY Unit RATE IN RATE IN WORD

DESCRIPTION Amount

Credit value of old ms grill Credit for the value of old dismantled M.S grill/structural steel (-)Rs. Thirty Only

material, including M.S flats bars angles and other integral steel components obtained from

105 dismantling work considered as scrap / unserviceable material and taken over by the 927.00 KG -30.00 - 27

contractor including loading transportation and removal from site etc. completede as

directed by the Engineer in Charge.

Credit value of Dismantled old G.I Sheet Credit for the value of old dismantled G.I (-)Rs. Thirty Only

sheets, including associated G.I/M.S fixing accessories considered as scrap obtained from

dismantling work and declared unserviceable by the Engineer in charge including taking

over the material by the contractor loading handling transportation and removal from site

etc. completed as directed by Engineer in charge

Credit value of Dismantled old Kota stone Credit for the value of old dismantled Kota (-)Rs. One Hundred Fifty Only

stone slabs obtained from dismantling of existing flooring/skirting and declared

107 unserviceable by the Engineer in charge including taking over the material by the 187.00 SMT -150.00 - 28

contractor loading handling transportation and removal from site etc. completed as directed

by Engineer in charge

Credit value of Dismantled old Paver blocks Credit for the value of old dismantled (-)Rs. One Hundred Fifty Only

cement concrete/ interlocking paver blocks of any shape size and thickness obtained from

dismentaling of existing paving and declared unserviceable for departmental use by the

Engineer in charge including taking over the material by the contractor loading handling

transportation and removal from site etc. completed as directed by Engineer in charge

ITEM QUANTITY Unit RATE IN RATE IN WORD

DESCRIPTION Amount

ELECTRICAL WORK

109a Providing and erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. mm copper 70.00 Point 580.00 RS: Five Hundred Eighty

PVC insulted FRLSH wire with 1.5 sq. mm (green) copper PVC insulated FRLSH wire for only

earth continuity in FIA approved ISI mark medium class white colour 20/25 mm dia.

embossed rigid PVC pipe with PVC fitting fixed with adhesive solution erected on/in Brick

Wall / slab along with continuous G.I. fish wire to draw wires and laid in approved manner

zari for PVC pipe and boxes shall be filled with cement mortar and finishing the surface to

match the wall / ceiling complete with approved make 5/6 Amp. ISI make modular type

switch and accessories mounted in 20 G. G.I. company fabricated metallic box covered

with appropriate front plate modules erected flushed with wall / ceiling with necessary

modular lamp holder / modular ceiling rose / HD Connector (make & model approved by

EIC and matching colur with switches accessories) (Deep Junction box 75mm depth if

required) as directed for concealed wiring. Light point. Cat.-II. Necessary sheet / tape /

polythene / sand must be erected or filled in all box to prevent mortar going into the box.

Length of point wiring must not increase than 10 mtr. For that necessary switch boards and

their locations must be finalised before execution by agency otherwise payment will not be

done for extra long point. (For future extention, if required, agency has to erect one higher

size metal box and modular plate as per instruction of EIC. Cost of blank plate shall be paid

as per tender item) [This item include cleaning (inside/outside) of all G.I. switch boards,

electric point box, fan box, MCBDB & box cutting plaster finishing for modular plate without

any gap] [conductor resistance should be as per IS:8130/1984]

109b For Secondary Light Point Cat.-II 20.00 Point 208.00 RS: Two Hundred Eight

109c For Fan Point.(with 6A Modular type switch and Two Module hum free 5/6 step EME step 17.00 Point 815.00 RS: Eight Hundred Fifteen

type Electronic fan regulator both having ISI Make ) Cat-II only

109d For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) Cat. II 11.00 Point 616.00 RS: Six Hundred Sixteen

109e For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) 23.00 Point 281.00 RS: Two Hundred Eighty One

ITEM QUANTITY Unit RATE IN RATE IN WORD

DESCRIPTION Amount

110 Providing and fixing Plug Point wiring with 1.1 KV grade ISI marked approved make 2 x 2.5 12.00 Point 897.00 RS: Eight Hundred Ninty

sq.mm copper PVC insulated FRLSH wire with 1.5 sq.mm (green) copper PVC insulated Seven only

FRLSH wire for earth continuity in FIA approved ISI mark white colour medium class

20/25 mm dia. embossed rigid PVC pipe with PVC fitting fixed with adhesive solution

erected in wall/slab along with continuous G. I. fish wire to draw wires and laid in approved

manner zari for PVC pipe & boxes shall be filled with cement mortar & finishing the surface

to match the wall / ceiling complete with 16 Amp Modular type Swich and accessories

mounted in 20 G. GI company fabricated metallic box covered with appropriate front plate

modules erected flushed with wall. For 16 Amp. Indicator switch & 1 No. 6/16 A universal

socket white colour suitable for 3/5 pin top duly both having ISI mark. (Necessary sheet /

tape / polythene / sand must be erected or filled in all box To Prevent Mortor Going In To

The Box) Cat.-II. (Conductor resistance should be as per IS:8130/1984)

111 Providing & Erecting Plug Point wiring with approved ISI marked 1.1 kv grade 2 x 4.0 3.00 Point 1061.00 RS: One Thousand Sixty One

sq.mm copper PVC insulated FRLSH wire with 2.5 sq.mm (green) copper PVC insulated only

FRLSH wire for earth continuity in FIA approved ISI mark white colour medium class

mm dia. embossed rigid PVC pipe with PVC fitting fixed with adhesive solution erected in

wall / slab along with continuous G.I. fish wire to draw wires and laid in approved manner.

zari for PVC pipe & boxes shall be filled with cement mortar & finishing the surface to

match the wall / ceiling complete with approved make 20 Amp. Modular type indicator

switch and accessories mounted in 20 SWG GI company fabricated metallic box covered

with appropriate front plate modules erected flushed with wall / ceiling. (a) 20 Amp Indicator

switch & 1 No. 20 A universal socket white colour suitable for 3 pin top duly both having

ISI mark (A.C POINT ONLY) CAT II (Necessary sheet / tape / polythene / sand must be

erected or filled in all box to Prevent Mortor Going In to The Box)

112a Providing and laying Mains with FRLSH PVC Insulated wire ISI marked 1.1 KV grade with 550.00 Mtr. 81.00 RS: Eighty One only

FIA approved ISI mark white colour medium class 20/25/32 mm dia. embossed rigid PVC

pipe with PVC fitting fixed with adhesive solution to be erected on/in brick wall / slab along

with continuous G. I. fish wire to draw mains laid in approved manner with plastering by

cement mortar & finishing the surface to match the wall / ceiling complete with FRLSH PVC

insulated wire for earth continuity. (Approved ISI make only) For 2 x 1.5 sq.mm. FRLSH

copper multi stranded conductor mains with 1.5 sq.mm. FRLSH copper multi stranded

conductor for earthing as per standard colour code. [conductor resistance should be as per

ITEM QUANTITY Unit RATE IN RATE IN WORD

DESCRIPTION Amount

112b For 2 x 2.5 sq.mm. FRLSH copper multi stranded conductor mains with 1.5 sq.mm. FRLSH 300.00 Mtr. 108.00 RS: One Hundred Eight

copper multi stranded conductor for earthing as per standard colour code. (Conductor only

resistance should be as per IS:8130/1984)

112c For 2 x 4.0 sq.mm. FRLSH copper multi stranded conductor mains with 2.5 sq.mm. FRLSH 150.00 Mtr. 145.00 RS: One Hundred Forty Five

copper multi stranded conductor for earthing as per standard colour code. [conductor only

resistance should be as per IS:8130/1984]

112d For 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. FRLS 200.00 Mtr. 192.00 RS: One Hundred Ninty Two

copper multi stranded conductor for earthing as per standard colour code. (with 25 mm dia. only

PVC pipe) (Conductor resistance should be as per IS:8130/1984 )

113 Providing & fixing 20 mm. dia. PVC insulated G.I. Corrugated Flexible pipe with necessary 150.00 Mtr. 31.00 RS: Thirty One only

socket, PVC bushes saddle, Check-nuts etc. complete of following sizes.

114 Providing & fixing 25 mm. dia. PVC insulated G.I. Corrugated Flexible pipe with necessary 150.00 Mtr. 37.00 RS: Thirty Seven only

socket, PVC bushes saddle, Check-nuts etc. complete of following sizes.

115 Providing following type of Modular Type Accessories mounted with 20 G company 40.00 Each 16.00 RS: Sixteen only

fabricated metalic box, single mounting base frame covered with textured / metallic front

plate, modules erected with necessary connection. As desired by Engineer in charge. For

Blank Plate Single Cat.-II

116a Providing and erecting Medium Class FIA approved and ISI mark white colour (embossed) 650.00 Mtr. 24.00 RS: Twenty Four only

RIGID PVC PIPES of following size complete erected with necessary PVC fittings &

Junction boxes fixed with adhesive solution & clamps on / in wall / ceiling along with

continuous fish wire to draw mains with necessary fittings and junction boxes for following

dia.For 20 mm. dia.

ITEM QUANTITY Unit RATE IN RATE IN WORD

DESCRIPTION Amount

116b For 25mm dia. 900.00 Mtr. 33.00 RS: Thirty Three only

117 Supplying & erecting M.S./ G.I metal Box having 16 Gauge painted with red oxide be 1500.00 Sq. 5.94 RS: Five and Paise Ninty

concealed in wall with necessary plastering & finishing covered with 3mm thick Laminated Inch Four only

sheet with grooving as directed of following depth. 3" Depth

118 Supplying & erecting & finishing covered with 3mm thick Polycarbonate (PC) sheet with 500.00 Sq. 3.00 RS: Three only

grooving as directed Inch

119 Supply, Installation, Testing and Commissioning of 1200mm sweep, BEE 5 Star rated, 17.00 Each 2603.00 RS: Two Thousand Six

Max. 30Watt Ceiling fan with Brush Less Direct Current (BLDC) permanent ferrite magnet Hundred Three only

Motor, class of insulation: B/E, Double ball bearings, Rust free 3 nos.Aluminium blades,

nos. canopies, shackle kit with earthing provision, copper winding, Power factor not < 0.9,

Service Value (CMM/W) minimum 7.5, Air delivery minimum 220 CMM, Minimum

RPM,230v (tolerance as per IS : 374-2019), THD < 10%, compitible with electronic

regulator unit for Five Speed Control and all remaining accessories like Down Road up to

1.0 m or as per site requirement other accessories including safety pin, nut bolts, washers,

temperature rise = 75 degree C (Max.), suitable for 140 to 285 Voltage and rectifier circuit

with surge, over current and overload protection , 50 Hz, Single phase AC Supply, earthing

etc. Complete as required.[ Make shall be approved by Engineer in Charge] (A) 1200 mm

Sweep (48") ( Make - Havells Efficiencia Dx , Bajaj Energos 28 & Crompton make & model

approved by EIC suject to above specification )

120 Supplying & Erecting Fan Hook Of 10 mm M.S Round bar bounded to the RCC bars up to 17.00 Each 125.00 RS: One Hundred Twenty Five

50 mm Length each side & piereced through 18 Gauge G.I Box having 125 mm dia depth only

of 75 mm complete erected concealed in ceiling with necessary modular plate / sheet

ITEM QUANTITY Unit RATE IN RATE IN WORD

DESCRIPTION Amount

121 Supplying and erecting 19 / 20 mm. nominal bore "B" Class G.I Pipe /M.S. Pipe down rod 12.00 Rn. 107.00 RS: One Hundred Seven

erected duly painted for fan complete with necessary 24/0.2 flat 3 core flexible cable with Mtr. only

earthing.The Down rod thickness,hole,locking arrangement,construction,power

coating,colour shed should be same as original down rod brought with ceiling fan.For that

agency has to give original down road sample to fabricator and one sample down rod

should be approved with EIC .After approval given by EIC agency can use the down rod as

per approved sample.If without approval down rod will be erect on site,agency has to

replace them with own cost

122 Supplying and erecting approved make Cabin fan of 230V. A.C. 50 Cy/s. 400 mm. sweep 10.00 Each 1527.00 RS: One Thousand Five

oscillating type complete erected with lead wires as directed.cat-ii [as per make and Model Hundred Twenty Seven only

approved by EIC]

123 Supplying and erecting approved make 200mm sweep low noise decorative exhaust fan 12.00 Each 1353.00 RS: One Thousand Three

having Aerodynamically designed and Blanced Blade, Blade finish Opaque,body colour Hundred Fifty Three only

White , finish Glossy , Rated Speed 1350/1800 revolution per minute ,air delivery 500m³ /

hr , noise level 50 dB , Power Consumption 35 W, ,Rated Voltage 230 V , no. of blades

7 , guard 18 Louvers , square frame ABS body with inbuilt lowers and square frame.(

Havell s Make Ventilair LX or Bajaj, Usha, Crompton and Equivalent Model Approved by

EIC subject to Above Specification )

ITEM QUANTITY Unit RATE IN RATE IN WORD

DESCRIPTION Amount

124 Supplying and Erecting LED indoor fitting having 1100mm long with LED of wattage 25.00 Each 370.00 RS: Three Hundred Seventy

Mashroom shape 0.2W to 0.5W assemble on single MCPCB with housing use as a heat only

sink shall be made from white powder coating Aluminum extrusion having enough strength

(sample must be approved by EIC)with polycarbonate diffuser with following specification:

(A) Company mark/name on the fitting.

(B) Rated input voltage and frequency: 220V to 240 VAC ; 50Hz.

(C) Rated input wattage: max. 24w

(D) Rated input current : 0.2 Amp

(E) Power Factor : Min.

(F) ATHD :Max. 15%

(G) Rated Luminous flux: Min. 2420 lm

(I) CRI: Min. 80Ra

(J) Driver Efficiency: Min. 80%

(K) LED life span: Min. 50000 Hrs @ L70 (Certificate shall be attached)

(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.

(M) Surge protection : Min. 2KV (N) IP rating: IP

(O) IK rating : IK

(P) Short circuit , Open circuit & Reverse Polarity Protection must be provided

(Q) Fixing Clamp min.12mm wide heavy duty design & strength should be sufficient to hold

the fitting erected on wall or ceiling (R)

core x 1.0 Sqmm copper wire with min. 1ft (300mm) earthing connector.

(Note:-The manufacturer/ authorized Channel partner of the manufacturer has to submit

5 yrs free replacement Guarantee for complete Fixture) [Approval will be given strictly

subject to item specification]

ITEM QUANTITY Unit RATE IN RATE IN WORD

DESCRIPTION Amount

125 SITC of Indoor Commercial recess/surface mounted (IP20) Max. 18 w Cool/warm white 44.00 Each 1027.00 RS: One Thousand Twenty

Color LED Down lighter office Lighting Luminaire with external separate driver having BIS Seven only

certification with fully die cast aluminium alloy housing without any PVC/Plastic part with

corrosion resistant powder coated finish as a heat sink with Poly Carbonet diffuser LED

complete (only from Philips Lumileds, CREE, BridgLux, Seoul, Nichia & Osram CRI >

CCT 5600K (5400 to 5800K bin). The led's should be mounted on Metal core based PCB

for better heat conduction and long life of LED. (LM 79 for complete fixture, LM80 for

individual LED Report mustbe submitted) The fixture should have extra protection of driver

like over/under voltage, THD<15%, P.F.>0.90, for 18 w fixture wide voltage range from

to 270 V, 50/60 HZ, 4 KV surge protection. Fixure must have Min. 1620 Lumens light

output. Fixture Efficacy should be>=100 Lumens/watt. (L70 @ 30,000 Hrs) The Fixture

should be able to easily mount on POP/Grid False cieling. The Luminiare should be tested

as per IP20 standards and following test reports should be submittedat the time of

approval. Model Approved By EIC as per Specification only (Note:- The

manufacturer/authorized Channel partner/dealer of the manufacturer has to give a 5 yrs.

free replcement Guarantee for complete Fixture)

126 Supplying and erecting 8 W LED lamps with following wattage capacity of 220 to 240 15.00 Each 111.00 RS: One Hundred Eleven

voltage, minimum 15000 burning hours life, 500 V in built-surge protection,Polycarbonate only

diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps

integral type, with PC diffuser suitable LAMP holder

127 Providing and erecting max. 10 watt LED battern having main housing having powder 5.00 Each 309.00 RS: Three Hundred Nine

coated aluminium extruded & mashroom shape polycarbonate diffuser. Electrically & only

photomatry parameters are as undr: 240 V, 50 Hz, System wattage 10 w ± 10 %, PF ≥

0.95, system luments min. 1000, CCT- 3000K to 6500K, CRI ≥ 80, THD ≤ 15%, delivery

efficiency ≥ 85%, L80 Certified LED, 30000 hrs. @ L70, Electronic CC driver, 3 core

insulated copper wire for internal wiring, IP20, operating voltage: 160 to 270 V, Surge -

KV, Fixing Clamp min.12mm wide heavy duty design & strength should be sufficient to hold

the fitting erected on wall or ceiling,Length of fitting should be min.600mm,3 core x

Sqmm copper wire with min. 1ft (300mm) & earthing connector.

ITEM QUANTITY Unit RATE IN RATE IN WORD

DESCRIPTION Amount

128 Providing ad erecting approved make single phase Double Door metal clad D.B. as per 3.00 Each 6254.00 RS: Six Thousand Two

relevant indian standards ammended upto date. Supplying and fixing following way single Hundred Fifty Four only

phase MCB distrubution board of company fabricated with sheet box with powder coated

inside and outside after apply seven tank chemical process of 1.2mm thick CRCA sheet

cover (Door, Back side & body of MCBDB) complete with suitable integral single piece

construction tinned copper busbar and link with all necessary interconnection and with

necessary size MS frame for mounting MCBDB.Manufacturer must be provided (1) IP

and as per IS:8623 1 & 3, IEC 61439 1 & 3 having D type PU gasket. (2) Seven tank

Powder coating Certificate (3) Tinned Copper/Brass make neutral & Earthing link with

isolation & Protecting Cover for 240 Volts on surface / recess complete with loose wire box,

terminal connectors for all incoming and outgoing circuits, with suitable size FRLS PVC

insulated copper conductor up to terminal blocks and internal connection, tinned coppper

bus bar, 1 no. tinned copper neutral link, tinned copper earth bar, din bar, detachable gland

plate, interconnections, powder painted including earthing etc. Single phase incoming and

horizontal single phase outgoing. For 16 Way MCBDB: Including 40 Amp. 30 mA double

pole ELCB (ELCB confirming to IS:12640/1988 having sensitivity of 30 mA and breaking

capacity of 10 KA), MCB 40 Amp. double pole switch (C curve confirms to IS:8828 having

breaking capacity of 10 KA) and S.P. MCB of rating 6 to 32 Amp. with NL suitable to

operate on 240 Volt A.C. power. (6 to 25 Amp 12 Nos.) (The DBs should be used of same

company of MCB / ELCB to be used) (MCBDB must be erected in line & level with spirit

level and finish the external edge with box cutting plaster) (Same colour MCB(SP/DP)

should be used as same as MCBDB) [Including Necessary numbering / marking on box

done with red colour radium sticker as per site requirement and instructions given by EIC

on site. Font / number size given by EIC on site as per requirement] Single phase incoming

and horizontal single phase outgoing.

ITEM QUANTITY Unit RATE IN RATE IN WORD

DESCRIPTION Amount

129 Providing ad erecting approved make 8 Way single phase Double Door metal clad D.B. as 1.00 Each 4651.00 RS: Four Thousand Six

per relevant indian standards ammended upto date. Supplying and fixing following way Hundred Fifty One only

single phase MCB distrubution board of company fabricated with sheet box with powder

coated inside and outside after apply seven tank chemical process of 1.2mm thick CRCA

sheet ( Door, Back side and body )cover complete with suitable integral single piece

construction tinned copper busbar and link with all necessary interconnection and with

necessary size MS frame for mounting MCBDB. Manufacturer must be provided (1) IP

and as per IS:8623 1 and 3, IEC 61439 1 and 3 having D type PU gasket. (2) Seven tank

Powder coating Certificate (3) Tinned Copper/Brass make neutral and Earthing link with

isolation and Protecting Cover for 240 Volts on surface / recess complete with loose wire

box, terminal connectors for all incoming and outgoing circuits, with suitable size FRLS

PVC insulated copper conductor up to terminal blocks and internal connection, tinned

coppper bus bar, 1 no. tinned copper neutral link, tinned copper earth bar, din bar,

detachable gland plate, interconnections, powder painted including earthing etc. Single

phase incoming and horizontal single phase outgoing.. For 8 Way MCBDB: Including

Amp. 30 mA double pole ELCB (ELCB confirming to IS:12640/1988 having sensitivity of

mA and breaking capacity of 10 KA), MCB 40 Amp. double pole switch (C curve confirms

to IS:8828 having breaking capacity of 10 KA) and S.P. MCB of rating 6 to 32 Amp. with NL

suitable to operate on 240 Volt A.C. power. (6 Amp:- 2 Nos., 16 Amp:- 2 Nos. )Cat.-III (The

DBs should be used of same company of MCB / ELCB to be used) (MCBDB must be

erected in line & level with spirit level and finish the external edge with box cutting plaster)

(Same colour MCB(SP/DP) should be used as same as MCBDB) [Including Necessary

numbering / marking on box done with red colour radium sticker as per site requirement

and instructions given by EIC on site. Font / number size given by EIC on site as per

ITEM QUANTITY Unit RATE IN RATE IN WORD

DESCRIPTION Amount

130a Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of 225 mm dia 3.00 Each 6000.00 RS: Six Thousand only

in soft soil. Suitable for doing pipe-in-pipe technology earthing.Earth electric rod must be

made from Corrosion free Hot dip galvanizing pipes having following specification.

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B ' Class ISI mark of

Reputed Brand, Inner pipe:- 42 mm minimum O.D., Pipe B Class ISI mark reputed Brand

Terminal Size: 70mm X 100mm length, Terminal Should be made from inner pipe for that

pipe must be pressed and give rectangular shape so its work as a terminal.The hot deep

galvanising must be done after above process.Galvanised thickness must be minimum

micron any where. SS Nut bolt:- 2 no.with washer suitable for 14mm dia. hole must be

provided at terminal. total minimum Weight(approx.) of earth electrodewith inside

conductive material minimum should be 26 kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to retain moisture for long

time Back Filling Compound weight is 25 Kg.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only] [OEM has to

submit all detail & sample for approved before supplying]

[Water must be poured in bore before starting earthing. Earthing value must be measured

with earth tester. Agency has to bring the earth resistance to at least 02 ohms & voltage

between neutral & Earthing upto 02 volt. Agency has to maintain earthing & its value for

one year. Earthing must be done in the presence of A.E. (GSPHCL)]

130b Providing & Erecting Earthing Chamber and cover:- Earthing chamber should heavy duty 3.00 Each 1025.00 RS: One Thousand Twenty

PVC/CC/brick masonary be size of 400 mm X 400 mm X 400 mm depth and Cover should Five only

be heavy duty cast iron with required size of 300 mm X 300 mm X 4 mm thick. Necessary

test report must be submitted.

130c For above earthing additional charges for boring in hard rock soil/ semi hard rock soil (by 3.00 Each 325.00 RS: Three Hundred Twenty

breaker) & filling soft soil in earth pit (certificate for soil have to given by DEE / AE along Five only

with photographs)

ITEM QUANTITY Unit RATE IN RATE IN WORD

DESCRIPTION Amount

131 Providing and erecting FRLS XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper 400.00 Mtr. 451.00 RS: Four Hundred Fifty One

conductor for 1.1 KV. to be laid on wall with necessary clamps 1.00 mm thick to be laid 90 only

cms underground with 1.00 mm thick G.I heavy duty grade or in existing trench / pipe at

road crossing or floor of following size of cables.For 4 core 4 Sq. mm

132 Providing & erecting FRLS XLPE (IS : 7098) (I)-88 ISI marked armoured Copper cable for 150.00 Mtr. 266.00 RS: Two Hundred Sixty Six

1100 volt to be laid 90 cms. Under ground or to be laid on wall with suitable G.I. heavy only

guage 1.6mm thick cable clamp or in existing DWC pipe underground or road crossing or

floor. For 3 core x 2.5 sq.mm.

133 Providing & fixing Double compressed heavy duty flange type brass cable gland with 12.00 Each 43.00 RS: Forty Three only

rubber ring for P V C insulated armoured cable complete with outgoing tails, insulating tape

etc. For following size cables. For 2 to 4 core x 2.5 to 4.0 Sq. mm (Sigma, MCI, Comet,

134 Providing & fixing Solderless crimping type Aluminium lugs conforming to IS suitable for 98.00 Each 6.00 RS: Six only

cable of following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner. For 1.5/2.5 to

Sq.mm Allumium Cable

135 Providing & fixing Solderless crimping type Copper lugs conforming to IS suitable for cable 98.00 Each 8.00 RS: Eight only

of following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner. for 1.5/2.5 to

136 Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked 190.00 Mtr. 58.00 RS: Fifty Eight only

copper wires of following size to be erected as directed. 3 core 1.5 sq.mm. PVC insulated

round copper wire ISI mark.

137a Providing & Erecting Mains with ISI marked, 1.1 KV grade electrolyte multi stranded, 180.00 Mtr. 70.00 RS: Seventy only

annealed copper conductor with heat resistant PVC insulated conforms to IS:694, IEC -

227 erected in existing pipe of following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of copper lugs, nuts and

bolts if required. For One Wire 6.00 sqmm

137b For One wire 10.00 sq. mm 150.00 Mtr. 114.00 RS: One Hundred Fourteen

ITEM QUANTITY Unit RATE IN RATE IN WORD

DESCRIPTION Amount

137c For One wire 16.00 sq. mm 150.00 Mtr. 176.00 RS: One Hundred Seventy Six

138a Providing & laying HDPE Double walled corrugated pipes (DWC) (conforming to IS: 16205 620.00 Mtr. 117.00 RS: One Hundred Seventeen

(part 24) 2018)) with minimum load required of 450N capacity with anti rodent and ultra only

violet material properties with necessary connecting accessories of same material at

required depth to be laid 90 cms. under ground for laying of cable below ground / road

surface for enclosing cable and back filling the same to make ground as per original. For

Outer dia. 50 mm and Inner dia. 38 mm. ) (Test Certificate to be Submitted)

138b For Outer dia. 90 mm and Inner dia. 75 mm. (Test Certificate to be Submitted) 160.00 Mtr. 150.00 RS: One Hundred Fifty

139a Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, 150.00 Mtr. 275.00 RS: Two Hundred Seventy

chloride rigid material with ignition free & flame proof confirming BS with necessary end Five only

caps Internal and external bend, flat bends, coupler, tee etc. All necessary accessories and

measuring of following sizes.For 75 mm x 50 mm trunking (MK / Legrand/OBO Make Only)

139b For 100 mm x 50 mm trunking (MK / Legrand/OBO Make Only) 150.00 Mtr. 424.00 RS: Four Hundred Twenty

140 Providing, erecting, fabricating the M.S. structure as per requirement of site as per 90.00 kg 77.00 RS: Seventy Seven only

structure design Including proper size approved by EIC of M.S. angles, flats, bars, square

pipe, channels, sections (Tata,Zindal,Asian,Jsi Make) complete with cutting, welding,

grinding and finishing duly painted with Asian/Nerolac make premium quality oil paint and

true care red oxide metal primer,asian paint make with erection on site as per direction of

engineer in charge with necessary grouting cementing, plastering and finishing complete.

All hole opening of square pipe end must be closed with M.S plate welding. Payment will

be done on KG as per Actual weight.

141 Supplying & erecting 12 mm thick backelite sheet of approved make and grade on 25 x 25 5.00 Sq. 2289.00 RS: Two Thousand Two

x 3 mm red oxide painted angle iron frame suitable for fixing ICDP SWITCH and energy Mtr. Hundred Eighty Nine only

meter (contractor shall make approved drawing of Bakelite sheet To arrange required No.

of Energy meter & ICDP switch -busbar etc. as per Actual space available in electrical

ITEM QUANTITY Unit RATE IN RATE IN WORD

DESCRIPTION Amount

142 Providing and erecting Steel cover as per drawing using 16 SWG M.S.sheet of following 12.00 Sq. 2535.00 RS: Two Thousand Five

depth, to house the switch gear etc. complete with locking arrangement and lock with Mtr. Hundred Thirty Five only

duplicate keys per cupboard and door handles erected with necessary support and

painting. [One coat red oxide and two coat enamel paint] Without angle iron frame For

SITC of Outdoor aesthetically designed LED Street Light Luminaire with total consumption 13.00 Each 4406.00 RS: Four Thousand Four

of max. 55 Watts with single piece heavy duty & sufficient size of die cast aluminium Hundred Six only

housing to accommodate driver, both SPD and necessary wiring and terminal easily inside

the housing. High power LEDs wattage of 5 Watt (Driving current of LED should be max.

80% of Rated current) shall be mounted on high quality metal core PCB with extremely

precison designed heat sink complete with IP66 protection. LED lense are covered with

thoughened glass / premium cluster Lens for better light distribution. The fixture should be

suitable for pole/bracket mounting. The fixture should be complied with both LM79 and LM

80 certified. LED module should be tested L70 at 50,000 hrs ( All Test Certificate must be

submitted with RA bill). LED fitting provided with high quality potted driver with Metal

143 housing and protection against high and low Voltage cut Off, Protection against 440V.

Driver should have protection like over current, over voltage, short circuit and operational in

the temperature range of 0 deg to 50 deg and humidity range of 10% to 90% RH. THD of

driver should be less than 10% and P.F > 0.95. The Fixture should meet the technical

criterias like Operating Voltage range 180 to 270 V, total lumens of fitting not less than

7500, CCT> 4K/6K as per site requirement & decided by EIC, CRI > 65, beam angle

deg, surge immunity level at least 4 KV integral and 10 KV non integral. (Note:- The

manufacturer / authorized Channel partner of the manufacturer has to submit 5 yrs free

replacement Guarantee for complete Fixture)

ITEM QUANTITY Unit RATE IN RATE IN WORD

DESCRIPTION Amount

SITC of Outdoor aesthetically designed LED Flood Light Luminaire with total consumption 6.00 Each 5324.00 RS: Five Thousand Three

of Max.75 watts with single piece heavy duty & sufficient size of die cast aluminium Hundred Twenty Four only

housing to accommodate driver, both SPD and necessary wiring and terminal easily inside

the housing. High power LEDs of 5 Watt (Driving current of LED should be max. 80% of

Rated current ) shall be mounted on high quality metal core based PCB with extremely

precised designed heat sink, complete with IP66 protection. LED lense are covered with

toughened glass / premium cluster Lens for better light distribution. The fixture should be

suitable for pole/bracket mounting. The fixture should be complied both LM79 and LM

certified. LED module should be tested L70 at 50,000 hrs ( All Test Certificate must be

submitted with RA bill). LED fitting provided with high quality potted driver with Metal

144 housing and protection against high and low Voltage cut Off, Protection against 440V.

Driver should have protection like over current, over voltage, short circuit and operational in

the temperature range of 0 deg to 50 deg and humidity range of 10% to 90% RH. THD of

driver should be less than 10% and P.F > 0.95. The Fixture should meet the technical

criterias like Operating Voltage range 180 to 270 V, total lumens of fitting not less then

11250, CCT > 4K/6K as per site requirement & decided by EIC, CRI > 65, beam angle

deg, surge immunity level at least 4 KV integral and 10 KV non integral. (Note:- The

manufacturer / authorized Channel partner of the manufacturer has to submit 5 yrs free

replacement Guarantee for complete Fixture)

145 Supplying and erecting Fabricating terminal box for street light pole made from 16 SWG 35.00 Each 702.00 RS: Seven Hundred Two

M.S. sheet having following size complete with fixing arrangement for terminal board, with only

necessary hole for wire entry and exit from the box. The box shall be provided with cover

and hinges on one side and bolting at other end The box shall be fixed by clamps

fabricated from 25mm x 6mm flat.The box shall be painted with one coat of red oxide and

two coats of paint having following box size 330 mm x 260 mm x 140 mm (depth).

Providing and fixing Terminal board of size 5.0 x 127 x 152.4 mm.bakelite sheet with

Amp. kitkat pattern porcelain fuse unit with suitable brass studs with nuts, washers and

clamps of size 25 mm x 3 mm suitable for pole painted with one coat of red lead paint.

146 Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop- 9.00 Each 890.00 RS: Eight Hundred Ninty

out approx. 2mm thick box complete with Bakelite connector strip 5way(3P+N+E), DIN rail only

for mounting mob & hinged doors as per requirement having locking arrangements with

mounting clamp with nuts, bolts & washers suitable for erection on pole with cable clamps&

earth bolt of following size of box. for 300mm x 200mm x 100mm

ITEM QUANTITY Unit RATE IN RATE IN WORD

DESCRIPTION Amount

147a Providing & erecting bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm outside 14.00 Each 487.00 RS: Four Hundred Eighty

diameter complete with suitable G.I. Sleeve tubing of 2 mm. thick and required size and Seven only

length suitable for 76.5 / 80 mm. required size of pole top or pipe in pipe surface for terrace

as per instruction of EIC or wall bracket as per instruction of EIC having nuts and bolts for

fixing the brackets and having spread of Upto 0.50 mtr. length with suitable rise as per site

condition and suitable welded stiffner reducer and nipple with check nut complete painted

with one coat of yellow zinc and two coats of alluminium paint for Single arm bracket

suitable for pole or terrace as per design given by EIC. For single arm bracket. (Jindal /

Asian / Tata / Surya Prakash make Only) (Fabricators:- Bajaj, Valmont, Transrail, Ambica,

RR Ispat Only) (Test certificate to be submitted)

147b For Double arm bracket. (Jindal / Asian / Tata / Surya Prakash make Only) (Fabricators:- 3.00 Each 616.00 RS: Six Hundred Sixteen

Bajaj, Valmont, Transrail, Ambica, RR Ispat Only) (Test certificate to be submitted) only

148 Providing & Erecting Universal Astro 5 KVA intelligent streetlight control system insu with 2.00 Each 18406.00 RS: Eighteen Thousand Four

weather proof box for outdoor application. (As per specification attached separately) (Make Hundred Six only

and model approved by EIC)

149 Drilling the road without breaking the road surface (Asphalt) for laying of cable for feeding 20.00 Mtr. 610.00 RS: Six Hundred Ten only

power supply by making up to following size of holes at both ends complete. Up to 150 mm

150 Providing and fixing of ABC Type Store Pressure Fire Extinguisher Having capacity 6 kg 5.00 Each 1991.00 RS: One Thousand Nine

Filled with Mono Ammonium Phosphate Powder 50% confirms to IS 4308, Stored Pressure Hundred Ninty One only

Type, UGTS Pressure Gauge, Can Height 530 mm, Diameter 150 ± 10mm, Discharge

Time 24 Sec, Controllable discharge mechanism, Jet Range 5 Meters, Average Discharge

is 92%, applicable on Class A,B & C and electrically started Fire, Fire Rating 4A:144B, Can

Construction : Deep drawn & CO2 Mig welded, EPDM(Ethylene Propylene Diene

Monomer) Rubber Hose with both end Aluminum clamped, Internal Coating - Epoxy

Powder coating, External Coating - Pure Polyester Powder coating (UV Resistant),Brass

forged CE Marked valves with NRV & Auto Safety Release with safety Pin is of SS

material, Made up from 1.6mm thick sheet, Extinguishers confirmed to IS 15683:2018

and ISI marked. Referance Weight:-Gross Weight 8.9 Kg, Empty Weight 2.9 Kg,

Necessary certificate & and guarantee must be attached, 2. OEM has to provide wall

mounting heavy duty bracket/clamp, screw, hardware for installation. 3.Following printed

marking Manufacturing Date and Expiry Date must be mention on Extinguisher 4. Refilling

period must be of 3 Years. Following Printed marking on equipment must be required:-

Model No, Capacity, Gross Weight, Content, Fire Rating, Batch No, Serial no, Mfg Month,

Refilling Due. [with necessary numbering / marking with oil paint by painter as instructions

given by G.S.P.H.C.L engineer] (Make: KANEX, MINIMAX,CEASEFIRE)

ITEM QUANTITY Unit RATE IN RATE IN WORD

DESCRIPTION Amount

151 Providing and fixing of CO2 type High Pressure Portable 4.5 kg Fire Extinguisher, filled 5.00 Each 6526.00 RS: Six Thousand Five

with Co2 Gas as per IS 15222, Control discharge mechanism fitted with 1 Meter Wire Hundred Twenty Six only

Braided Hose & Electrical non-conductor Polyethylene Flat Horn with Diffuser Nozzle for

dispersed discharge of CO2, Discharge Time 12 Sec, Average Discharge is 95%,

Applicable on Class B, C and electrically started Fire, Fire Rating 55B, Internal coating is

not applicable & External coating is of enamel spray painting, Powder Coated Handle,

Valve Confirm to IS 3224 ISI Marked, CO2 Cylinder construction: hot spinning by seamless

pipes & bearing ISI mark, Body confirms to IS 7285 and PESO ( Petroleum and Explosives

Safety Organization) APPROVED, Minimum Wall Thickness 4 to 4.2 mm, Extinguishers

confirmed to IS 15683:2018 and ISI marked. Referance Weight:-Gross Weight 16.4, empty

weight 11.9 Kg, 1. Necessary certificate & and guarantee must be attached, 2. OEM has

to provide wall mounting heavy duty bracket/clamp, screw, hardware for installation.

3.Following printed marking Manufacturing Date and Expiry Date must be mention on

Extinguisher 4. Refilling period must be of 5 Years. Following Printed marking on

equipment must be required:- Model No, Capacity, Gross Weight, Content, Fire Rating,

Batch No, Serial no, Mfg Month, Refilling Due. [with necessary numbering / marking with

oil paint by painter as instructions given by G.S.P.H.C.L engineer] (Make: KANEX,

MINIMAX,CEASEFIRE)

TOTAL CIVIL (A) 1 60 17

TOTAL ELECTRICAL COST(B)

TOTAL COST(A+B) 1 72 50

Sing. Of contractor DY.Executive Engineer Executive Engineer

Ahmedabad. Ahmedabad.