Annual Plan-Lighting provision for foot overbridge Neharu trophy ward Alappuzha ,under Alappuzha Municipality.-General Electrical Work

90.2.1.1:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single Control light point with 6A, plate ceiling rose - Short point

90.2.1.6:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Combined plug point with 6 A, 5 pin plug socket controlled by 6 A, switch in the same switch board as that of light points

OD231038/2025-2026:Supply & fitting K.lite .code No. 4983 27 W. LED .TR. light house midi post top lantern or it's equivalent make on the existing post & giving connection as required.

90.3.17.3:Supply, conveyance and erection of the following sizes of 'B' class GI pipe in single section for post top lantern of all types on concrete base (excluding charges for concrete base and excavation) and painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer etc. as required.50 mm dia GI pipe

OD202870/2025-2026:Supply,conveyance,installation, testing & commisssioning of 20W LED flood light out put greater than 105 lumen/W 4000-6000 k with IP 66 protetion chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load,internal surge protection up to 8 KV and Alu. pressure die -cast powder coated housing acrylic cover complete with THD less thaaaaaaaaan 10% ,power factor greater than 0.98.ROHS compliant, duly wired up for use on 230 v, AC supply.Driver compartment should be separatly ccessible for maintenance(LM 79&80 certificates from NABL accreted. Third party lab to be produced mentioning chip manufacture.

90.15.4.5:Supply Conveyance, installation, testing and commissioning of 40W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

OD231035/2025-2026:Supply & fitting Hensel make (cat No. KFo4o4 G with terminal connectors ) out door connection box with terminal connectors size 104 x 104 x 70 mm. as required.

OD230913/2025-2026:Supply & clamping LED strip out door type 12w/mtr.length on existing 150mmdia/200mm dia GI pipe using suitable size GI saddles with steel screws etc. in position as required. Philips/crompton/Oasis/equivalent.

OD230970/2025-2026:Supply & fitting LED strip connector / adapter in position as required.