Annual Maintenance of Electric Works at Head Office, Ward offices, Rental Housing Building, Transit Camp

Amount

Description

1-3-1(Item No.1) Supplying & erecting mains with 2 x 1.5 sq.mm F.R. solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No. WG-MA/BW

1-3-4 (Item No.2) Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided coduit / trunking/ inside pole/Bus bars or any other places. as per specification No: WGMA/ BW

1-6-4 (Item No.3) Supplying & erecting mains with 2x2.5 sq.mm. and earth wire 1.5 sq.mm FRLSH PVC copper wire in HMS PVC conduit min. 20mm dia. as per specification No: WG-MA/PC.

1-6-6 (Item No.4) Supplying & erecting mains with 2x4 sq.mm. and earth wire 2.5 sq.mm FRLSH PVC copper wire in HMS PVC conduit min. 20mm dia, as per specification No: WG-MA/PC.

1-7-2 (Item No.5) Supplying and erecting One/Two way piano type switch 6A./bell push erected on filled polypropylene board or double polished wooden board/ folded or screwed board with top of either wooden/ 3 mm thick hylam sheet/ 4mm thick plywood pasted with 1.5 mm thick laminate with S M screws and duly connected.

1-7-5 (Item No.6) Supplying and erecting shockproof 3 pin plug socket 6A with porcelain base / flush type erected on filled polypropylene board or polished thick varnished double wooden block /folded or screwed board with top of either wooden / 3 mm thick hylam sheet/ 4mm thick plywood pasted with 1.5 mm thick Laminate with S M screws and duly connected.

1-7-7 (Item No.7) Supplying & erecting ISI mark ceiling rose / batten holder / slanting holder / pendent holder bakelite base 6 A. erected on filled polypropylene ISI marked board or polished double wooden block / ISI marked board or polished double wooden block / ISI mark PVC junction box.

1-7-8 (Item No.8) Supplying adaptor for lamp holder 230 V.A.C. Supply.

1-7-12 (Item No.9) Supplying and erecting flush type, shockproof plug socket 6 pin 6A and 16A with switch 16A combined unit erected on filled polypropylene board or double wooden block / 3mm thick hylam sheet / 4mm thick plywood pasted with 1.5 mm thick sunmica with S M screws and duly connected.

1-7-14 (Item No.10) Supplying and erecting shockproof bell push on filled polypropylene board or wooden block covered with sunmica with 2 core (TRS type) PVC insulated copper wire of size 0.5 sqmm 5 m length connected to the point.

1-7-17 (Item No.11) Supplying 16 amp. 3 pin plug Top bakelite type of 230 V. A.C supply.

1-8-1 (Item No.12) Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

1-8-2 (Item No.13) Supplying and erecting ISI mark modular type switch 16A duly erected on provided plate and box with wiring connections complete.

1-8-11 (Item No.14) Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

1-8-16 (Item No.15) Supplying and erecting ISI mark modular type telephone socket two gang with safety shutter, duly erected on provided plate and box with wiring connections complete.

1-8-17 (Item No.16) Supplying and erecting ISI mark modular type computer jack RJ 45 with safety shutter, duly erected on provided plate and box with wiring connections complete.

1-8-20 (Item No.17) Supplying and erecting modular type electronic dimmer 400/ 450 W one module ISI mark approved make duly erected on provided plate and box with wiring connections complete.

1-8-26 (Item No.18) Supplying and erecting PVC surface modular switch box with double mounting plate for 1 module complete duly erected.

1-8-27 (Item No.19) Supplying and erecting PVC surface modular switch box with double mounting plate for 2 module complete duly erected.

1-8-29 (Item No.20) Supplying and erecting PVC surface modular switch box with double mounting plate for 4 module complete duly erected.

1-8-30 (Item No.21) Supplying and erecting PVC surface modular switch box with double mounting plate for 6 module complete duly erected.

1-8-31 (Item No.22) Supplying and erecting PVC surface modular switch box with double mounting plate for 18module complete duly erected.

1-8-38 (Item No.23) Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

1-8-39 (Item No.24) Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

1-8-40 (Item No.25) Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

1-8-41 (Item No.26) Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 16 / 18 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

1-8-50 (Item No.27) Supplying and erecting PVC Surface modular double mounting plate 6 modules complete duly erected.

1-8-51 (Item No.28) Supplying and erecting PVC Surface modular double mounting plate 8 modules complete duly erected.

1-8-52 (Item No.29) Supplying and erecting PVC Surface modular double mounting plate 12 modules complete duly erected.

1-8-53 (Item No.30) Supplying and erecting PVC Surface modular double mounting plate 18 modules complete duly erected.

1-9-9 (Item No.31) Point wiring for light/fan/bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW

1-9-10 (Item No.32) Supplying and drawing of 2x1.5 sq.mm. FR grade copper wires with 1.5 sq.mm earth wire in provided concealed pipes for concealed type light/fan/bell point wiring and terminating on modular accessories in box for point wiring for light/fan/bell as per specification No: WG-PW/CW

1-9-11 (Item No.33) Point wiring for independent plug, concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm (2+1E) FR grade copper wires, modular type switch and socket, earthing and required accessories as per specification No WGPW/ SW

1-9-12 (Item No.34) Supplying and drawing of 2x1.5 sq.mm. FR grade copper wires with 1.5 sq.mm earth wire in provided concealed pipes and terminating on modular accessories in box for point wiring for independent plug as per specification No WG-PW/SW

1-9-15 (Item No.35) Point wiring for light/fan/bell hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW

1-9-17 (Item No.36) Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories as per specification No: WGPW/ SW

1-9-19 (Item No.37) Point wiring for independent plug in PVC trunking (casingcapping) with 1.5 sq.mm FRLSH grade copper wire, flush type switch, earthing and required accessories as per specification No: WG-PW/SW

1-9-26 (Item No.38) Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW

1-9-28 (Item No.39) Point wiring for independent plug in PVC trunking (casingcapping) with 1.5 sq.mm (2+1E )FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW

1-10-1 (Item No.40) Supplying & erecting Telephone cable 2 pair with 0.5 mm die. Laid in provided PVC casing/ conduit as per specification No:WG-TW

1-10-4 (Item No.41) Supplying & erecting telephone copper cable 5 pair with 0.5 mm dia. laid in provided PVC casing capping / conduit as per specification No. WG-TW

1-10-5 (Item No.42) Supplying & erecting telephone copper cable 10 pair with 0.5 mm dia. laid in provided PVC casing capping / conduit as per specification No. WG-TW

1-11-30 (Item No.43) Supplying, installing, testing & commissioning push button telephone instrument desk top/wall mount unit as per specification complete

1-11-31 (Item No.44) Supplying, installing, testing & commissioning push button telephone instrument desk top/wall mount with caller ID unit as per specification complete.

1-12-7 (Item No.45) Supplying & installing UTP networking cat-6 armoured cable suitable for LAN / WAN Computer net-working as per specification No. WG-COC/NC

2-1-2 (Item No.46) Supplying and erecting LED square / circular 5 to 8W down lighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete.

2-1-3 (Item No.47) Supplying and erecting LED square / circular 9 to 12W down lighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete.

2-1-4 (Item No.48) Supplying and erecting LED square / circular 13 to 15W down lighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete.

2-1-8 (Item No.49) Supplying and erecting square / round shaped CRCA /die-cast aluminium powder coated housing LED panel ( slim edge-lit) light suitable for 13W to18W with provision for plane front frame with translucent cover fixed to the housing complete.

2-1-9 (Item No.50) Supplying and erecting square / round shaped CRCA /die-cast aluminium powder coated housing LED panel ( slim edge-lit) light suitable for 19W to24W with provision for plane front frame with translucent cover fixed to the housing complete.

2-1-10 (Item No.51) Supplying and erecting square / round shaped CRCA /die-cast aluminium powder coated housing LED panel ( slim edge-lit) light suitable for 25W to 32W with provision for plane front frame with translucent cover fixed to the housing complete.

2-1-11 (Item No.52) Supplying and erecting square shaped CRCA /die-cast aluminium powder coated housing LED panel light slim edge-lit) 600x600mm suitable for 36 W-40W with rovision forplane front frame with translucent cover fixed to the housing complete.

2-1-13 (Item No.53) Supplying and erecting LED flexible strip light 5m length upto 25W conforming IP 65 of any colour with driver complete

2-1-21 (Item No.54) Supplying and erecting decorative oval bulk head edge-lit 10W LED luminaire comprising of high brightness LED Fitting on provided PVC block / wooden board.

2-1-23 (Item No.55) Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete.

2-2-7 (Item No.56) Supplying and erecting 1 light wall bracket Aluminium body & arm anodised / powder coated with decorative glass shade fixed on wall.

2-2-8 (Item No.57) Supplying and erecting 2 light wall bracket Aluminium body & arm anodised / powder coated complete with lamp holder and decorative glass shade suitably erected on polished wooden board / plywood pasted with laminate.

2-2-9 (Item No.58) Supplying and erecting 1 light fancy wall bracket with arm fabricated from brass duly lacquered with suitable holder and fancy glass shade duly wired erected on wall with suitable size of polished wooden / laminated board

2-2-10 (Item No.59) Supplying and erecting 2 light fancy wall bracket with arm fabricated from brass duly lacquered with suitable holder and fancy glass shade duly wired erected on wall with suitable size of polished wooden / laminated board.

2-3-1 (Item No.60) Supplying and erecting 2 x 36 / 40W FTL corrosion proof capsule type in non-corrosive polycarbonate housing and prismatic polycarbonate cover with individual high power electronic ballast saving Power factor >0.9 and working voltage range of 170 - 270V AC, IP 65 protection suitable for cold storage areas to be fixed in false ceiling or at ceiling or on wall complete.

2-4-2 (Item No.61) Supplying and erecting low watt loss vaccum impregnated copper choke (VPIT) suitable for FTL from 24 to 40 W as per specification No. FG/AS1

2-4-3 (Item No.62) Supplying and erecting electronic ballast, pf > 0.9 or transformer suitable for T5 lamp upto 28 W as per specification No. FG-FG/AS1

2-4-4 (Item No.63) Supplying and erecting electronic ballast, pf > 0.9 or transformer suitable for FTL upto 40 W as per specification No. FG-FG/AS1

2-4-5 (Item No.64) Supplying 18 / 20 /36 / 40 W tube starter 230V as per specification No. FG-FG/AS11

2-4-6 (Item No.65) Supplying and erecting double suspension heavy duty lacquered iron chain with hooks for erecting fluo. tube light fitting(for erecting various fixtures like FTL, LED, etc) with necessary shielded copper flexible wire three core of 1 sq mm for connecting leads. (for measurements half of the actual length used)

2-4-7 (Item No.66) Supplying and erecting double suspension pipe rod of 16 gauge 20mm.dia H.G. conduit duly threaded and painted with two coats of enamel paint for erection of fluo. tube light fitting with necessary check nuts and shielded copper flexible wire three core of 1 sq mm for connecting leads (for measurements half of the actual length both pipes used)

2-4-9 (Item No.67) Providing and erecting clamps for box type / industrial type fittings with provided suspension down rod of 20 mm dia. H.G. conduit, the clamp shall be made of 25 x 3 (mm) MS flat with cutting, bending, drilling erected properly with necessary nut bolt as per direction.

2-4-14 (Item No.68) Supplying and erecting luminous / modular type call bell indicator with plastic body, heavy duty coil and indicator lamp working on 230V A.C. supply with resetting arrangement complete erected on double wooden/ sunmica board

2-4-15 (Item No.69) Supplying and erecting Electronic Type cordless call bell erected on T.W. board having portable bell push working on 9V D.C. battery and (effective range upto 45 meter) bell on 250 V A.C. supply.

2-4-21 (Item No.70) Supplying and erecting electronic type driver for indoor LED upto 19W-24W fixtures suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD<10%.

2-5-2 (Item No.71) Supplying & erecting LED street light fitting for 20 to 25W, with PF > 0.95, class IP 65 or above. Housing of pressure die cast alluminium alloy and heat sink extruded aluminium as per specification no. FG-ODF/FLS2

2-5-3 (Item No.72) Supplying & erecting LED street light fitting for 26 to 36W, with PF > 0.95, class IP 65 or above. Housing of pressure die cast alluminium alloy and heat sink extruded aluminium as per specification no. FG-ODF/FLS2

2-5-4 (Item No.73) Supplying & erecting LED street light fitting for 40 to 48W, with PF > 0.95, class IP 65 or above. Housing of pressure die cast alluminium alloy and heat sink extruded aluminium as per specification no. FG-ODF/FLS2

2-5-5 (Item No.74) Supplying & erecting LED street light fitting for 60W, with PF > 0.95, class IP 65 or above. Housing of pressure die cast alluminium alloy and heat sink extruded aluminium as per specification no. FG-ODF/FLS2

2-5-7 (Item No.75) Supplying & erecting LED street light fitting for 75 to 90W, with PF > 0.95, class IP 65 or above. Housing of pressure die cast alluminium alloy and heat sink extruded aluminium as per specification no. FG-ODF/FLS2

2-5-8 (Item No.76) Supplying & erecting LED street light fitting for 100W, with PF > 0.95, class IP 65 or above. Housing of pressure die cast alluminium alloy and heat sink extruded aluminium as per specification no. FG-ODF/FLS2

2-5-12 (Item No.77) Supplying & erecting LED Flood light fitting of 30-40W including lamp with PF > 0.95, class IP 65 or above. Housing of pressure die cast alluminium alloy and heat sink extruded aluminium as per specification no. FG-ODF/FLS2

2-5-13 (Item No.78) Supplying & erecting LED Flood light fitting of 50W including lamp with PF > 0.95, class IP 65 or above. Housing of pressure die cast alluminium alloy and heat sink extruded aluminium as per specification no. FG-ODF/FLS2

2-5-14 (Item No.79) Supplying & erecting LED Flood light fitting of 70-80W including lamp with PF > 0.95, class IP 65 or above. Housing of pressure die cast alluminium alloy and heat sink extruded aluminium as per specification no. FG-ODF/FLS2

2-5-15 (Item No.80) Supplying & erecting LED Flood light fitting of 90-100W including lamp with PF > 0.95, class IP 65 or above. Housing of pressure die cast alluminium alloy and heat sink extruded aluminium as per specification no. FG-ODF/FLS2

2-5-16 (Item No.81) Supplying & erecting LED Flood light fitting of 120W including lamp with PF > 0.95, class IP 65 or above. Housing of pressure die cast alluminium alloy and heat sink extruded aluminium as per specification no. FG-ODF/FLS2

2-5-17 (Item No.82) Supplying & erecting LED Flood light fitting of 150W including lamp with PF > 0.95, class IP 65 or above. Housing of pressure die cast alluminium alloy and heat sink extruded aluminium as per specification no. FG-ODF/FLS2

2-5-23 (Item No.83) Supplying and erecting 15W LED series PAR lights by making necessary arrangement/ recess in wall to make it flush with surface.

2-5-25 (Item No.84) Supplying and erecting mushroom shaped integral 12W-16W LED decorative bollard upto 680mm with IP65 protection on provided foundation complete.

2-5-26 (Item No.85) Supplying and erecting 40W LED post top made in cast aluminium spigot housing with decorative clear opal acrylic diffuser and IP65 protection on provided pole/ bracket.

MR (Item No.86) Supplying and erecting Integral Focus light luminaire, black powder coated housing, suitable for 3×1W / 3×3W green /white / warm white LEDs. Enclosed with glass cover in frame. Mounting bracket and spike provided for aiming the objects.

2-6-2 (Item No.87) Supplying and erecting Gate/garden light fitting with 300mm dia. glass bowl suitable for upto 12W LED lamp on provided pipe as per specification No. FG-ODF/GLT

2-6-3 (Item No.88) Supplying & erecting integral post top lantern fixtures (mushroom type) suitable for LED lamp upto 12 W consisting of clear acrylic top cover, cast aluminium pole cap complete with accessories on provided pole /bracket as per specification no. FGODF/ PTL

2-8-1 (Item No.89) Supplying and erecting street light fitting suitable for 70W H.P.S.V. lamp with accessories complete on provided bracket as per specification no. FG-ODF

2-8-3 (Item No.90) Supplying and erecting street light fitting suitable for 250W H.P.S.V. lamp complete with accessories on provided bracket as per specification no. FG-ODF

2-8-5 (Item No.91) Supplying and erecting street light fitting suitable for 70W metal halide lamp complete with accessories on provided bracket as per specification no. FG-ODF

2-8-6 (Item No.92) Supplying and erecting street light fitting suitable for 150W metal halide lamp complete with accessories on provided bracket as per specification no. FG-ODF

2-8-7 (Item No.93) Supplying and erecting street light fitting suitable for 250W metal halide lamp complete with accessories on provided bracket as per specification no. FG-ODF

2-9-1 (Item No.94) Supplying and erecting Street light bracket made from 25 mm. dia ‘B’ class G.I. Pipe, 0.6 m in length along with pole cap of 300 mm length and 80 mm dia duly welded with provided leads as per specification no. FG-BKT/BPC

2-9-2 (Item No.95) Supplying and erecting Street light bracket made from 40 mm. dia ‘B’ class G.I. Pipe, 0.6m. in length along with pole cap of 300 mm length and 80 mm dia duly welded with provided leads as per specification no. FG-BKT/BPC

2-9-6 (Item No.96) Supplying and erecting Street light bracket for erection of Double fitting made from 40 mm. dia ‘B’ class G.I. pipe 1.0 m in length along with pole cap of 300 mm length 100 mm dia duly welded as per specification no. FG-BKT/BPC

2-9-16 (Item No.97) Supplying and erecting condenser for MV/SV/MH lamp 250W,230V as per specification no. FG-FG/AS7

2-9-17 (Item No.98) Supplying and erecting condenser for MV/SV/MH lamp 400W,230V as per specification no. FG-FG/AS7

2-9-18 (Item No.99) Supplying and erecting ignitor suitable for 230V HPSV lamp 70/ 150 /250/ 400W as specification no. FG-G/AS6

2-9-19 (Item No.100) Supplying and erecting electronic ignitor suitable for 230V metal halide lamp 70/150/250/400W (integral or non-integral type luminaries as specification no. FG-FG/AS6

2-9-20 (Item No.101) Supplying and erecting VPIT heavy duty copper wound ballast 230Vfor 80-150W HPSV/MV/MH as per specification no. FGFG/ AS5.

2-9-21 (Item No.102) Supplying and erecting VPIT heavy duty copper wound ballast 230Vfor 250W HPSV/MV/MH as per specification no. FGFG/ AS5.

2-9-22 (Item No.103) Supplying and erecting VPIT heavy duty copper wound ballast 230Vfor 400W HPSV/MV/MH as per specification no. FGFG/ AS5.

2-9-26 (Item No.104) Supplying and erecting electronic type Driver for Outdoor LED fittings upto 76W-100W suitable to operate on 230V A.C. 50 Hz. having pf>0.95 and THD<10%.

2-10-2 (Item No.105) Supplying and erecting T8 Fluorescent tube day light 1200mm 36 W

2-10-6 (Item No.106) Supplying and erecting T5 28 W energy efficient fluorescent tube.

2-10-9 (Item No.107) Supplying & erecting 3W, 230V integral type LED Lamp suitable for B-22/E-27 base.

2-10-10 (Item No.108) Supplying & erecting 5W-7W, 230V integral type LED Lamp suitable for B-22/E-27 base.

2-10-11 (Item No.109) Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base.

2-10-19 (Item No.110) Supplying and erecting HPSV lamp 3 pin BC/Screwed cap head /pin type 230V,70 W SON-T-type.

2-10-20 (Item No.111) Supplying and erecting HPSV lamp 3 pin BC/Screwed cap head /pin type 230V,150 W SON-T-type.

2-10-21 (Item No.112) Supplying and erecting HPSV lamp 3 pin BC/Screwed cap head /pin type 230V,250 W SON-T-type.

2-10-23 (Item No.113) Supplying and erecting Metal Halide lamp double ended 230V, 70 W .

2-10-24 (Item No.114) Supplying and erecting Metal Halide lamp double ended 230V, 150 W .

2-10-25 (Item No.115) Supplying and erecting Metal Halide lamp single ended 230V, 250 W .

2-10-26 (Item No.116) Supplying and erecting Metal Halide lamp single ended 230V, 400 W .

2-12-3 (Item No.117) Supplying and erecting regular/ standard model ceiling fan of 1200mm. sweep complete erected in position as per specification no. FG-FN/CF

2-12-4 (Item No.118) Providing and erecting bracket fan 400 mm. sweep A. C. 230 volts 50 cycles 1350 R.P.M. Oscillating type, plastic or metal blades chrome plated guard with regulator and moisture proof treatment to winding and with ‘E’ class insulation.

2-12-5 (Item No.119) Providing and erecting air circulator 450 mm. sweep oscillating type, wall mounting 1440 RPM without speed regulator, overheat protection unit, totally enclosed, flame proof motor suitable for230/250 Volts single phase, 50 cycles A.C. supply, with one metre of 3core lead wire and with moisture proof treatment to winding and with ‘E’ class insulation.

2-12-15 (Item No.120) Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation.

2-12-16 (Item No.121) Supplying and erecting exhaust fan heavy duty 230 V, A.C. 50 cycles 375/380 mm. 900 RPM complete erected in position as per specification no.FG-FN/EXF

2-13-1 (Item No.122) Supplying and erecting condenser 2.5 micro farad for ceiling fan

2-13-2 (Item No.123) Supplying & fixing anchor type fastener fan hook, with 2 nos. of 10 mm dia x 75 mm long with necessary materials for ceiling fan.

2-13-3 (Item No.124) Supplying and erecting fan clamp of 30 x 5 mm. M.S. flat of required length and 10 mm. M.S. bolt and nuts erected with necessary hook of 10 mm. M.S. round bar and painted.

2-13-4 (Item No.125) Supplying and erecting fan hook of 10 mm. M.S. round bar grouted in RCC slab with making the site as original.

2-13-6 (Item No.126) Supplying and erecting ‘B’ grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.

2-13-9 (Item No.127) Supplying and erecting electronic type step regulator for ceiling fan 600/ 900/ 1200/ 1400 mm. sweep, complete erected on provided switch board.

2-13-14 (Item No.128) Supplying & erecting 22 SWG G.I sheet metal cawl sector shaped with 25 x 25 x 3 (mm) angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 300 mm as per specification no FG-FAS/MSC

3-1-1 (Item No.129) Supplying and erecting storage type horizontal / vertical water heater 15 litres capacity with BEE 5 star rating high impact resistance engineering plastic body on wall / loft complete duly tested and marking sr. no. and date of erection. specification no. AP-WH/STWH

5-1-6 (Item No.130) Supplying and erecting triple pole metal clad switch and fuse 415V, 32A on iron / GI frame as per specification no. SWSWR/ MTP.

5-1-7 (Item No.131) Supplying and erecting triple pole metal clad switch and fuse 415V, 63A on iron / GI frame as per specification no. SWSWR/ MTP.

5-2-1 (Item No.132) Supplying and erecting metal clad distribution board approved make 250V. 2 way,16A. per way & neutral bar connector complete erected on iron frame/ wooden plank or Board as per specification no. SW-SWR/MDB

5-2-3 (Item No.133) Supplying and erecting metal clad distribution board approved make 250V. 4 way,16A. per way & neutral bar connector complete erected on iron frame/ wooden plank or Board as per specification no. SW-SWR/MDB

5-2-4 (Item No.134) Supplying and erecting metal clad distribution board approved make 250V. 6 way,16A. per way & neutral bar connector complete erected on iron frame/ wooden plank or Board as per specification no. SW-SWR/MDB

5-2-5 (Item No.135) Supplying and erecting metal clad distribution board approved make 250V. 8 way,16A. per way & neutral bar connector complete erected on iron frame/ wooden plank or Board as per specification no. SW-SWR/MDB

5-2-11 (Item No.136) Supplying and erecting metal clad distribution board approved make 415/500V. 4 way,32A. per way & neutral bar connector complete erected on iron frame/ wooden plank or Board as per specification no. SW-SWR/MDB

5-2-12 (Item No.137) Supplying and erecting metal clad distribution board approved make 415/500V. 6 way,32A. per way & neutral bar connector complete erected on iron frame/ wooden plank or Board as per specification no. SW-SWR/MDB

5-2-13 (Item No.138) Supplying and erecting metal clad distribution board approved make 415/500V. 8 way,32A. per way & neutral bar connector complete erected on iron frame/ wooden plank or Board as per specification no. SW-SWR/MDB

5-3-3 (Item No.139) Supplying erecting & marking SPMCB 6A to 32 A B - series in provided distibution board as per specification no.SW - SWR / MCB

5-3-5 (Item No.140) Supplying erecting & marking SPMCB 40A to 63 A B - series in provided distibution board as per specification no.SW - SWR / MCB

5-3-7 (Item No.141) Supplying, erecting & marking DPMCB 6 A to 32 A, B-series in provided distibution board as per specification no. SW - SWR / MCB

5-3-15 (Item No.142) Supplying, erecting & marking TPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB

5-3-17 (Item No.143) Supplying, erecting & marking FPMCB 40 A to 63 A in provided distribution board as per specification no. SW - SWR / MCB

5-3-18 (Item No.144) Supplying, erecting & marking TPN MCB 6A to 32A in provided distribution board as per specification no. SW - SWR / MCB

5-3-19 (Item No.145) Supplying, erecting & marking TPN MCB 40A to 63A in provided distribution board as per specification no. SW - SWR / MCB

5-3-21 (Item No.146) Supplying, erecting & marking Tripal pole isolator only switch version of miniature circuit breaker of 40A with required wiring connections and lugs etc in provided distribution board.

5-3-22 (Item No.147) Supplying, erecting & marking Tripal pole isolator only switch version of miniature circuit breaker of 63A with required wiring connections and lugs etc in provided distribution board.

5-3-23 (Item No.148) Supplying, erecting & marking Tripal pole isolator only switch version of miniature circuit breaker of 100A with required wiring connections and lugs etc in provided distribution board.

5-3-30 (Item No.149) Supplying, fixing and commissioning MCB type change over switch 4 pole, 25A with 3 positions (I-O-II) with centre off position as per specification no. SW-SWR/MCBCOS

5-3-31 (Item No.150) Supplying, fixing and commissioning MCB type change over switch 4 pole, 40A with 3 positions (I-O-II) with centre off position as per specification no. SW-SWR/MCBCOS

5-3-32 (Item No.151) Supplying, fixing and commissioning MCB type change over switch 4 pole, 63A with 3 positions (I-O-II) with centre off position as per specification no. SW-SWR/MCBCOS

5-4-4 (Item No.152) Supplying and erecting triple pole and neutral distribution board (TPNDB) surface/ flush mounted SP /TP MCBs of 12 ways on iron / GI frame (vertical busbar type) as per specification no. SW-SWR/ MCBDB

5-4-5 (Item No.153) Supplying and erecting triple pole and neutral distribution board (TPNDB) surface/ flush mounted SP / TP of 24 ways on iron / GI frame (vertical busbar type) as per specification no. SWSWR/ MCBDB

5-5-1 (Item No.154) Providing and erecting 3 Pole MCCB upto 100A, 415V capacity with S.C. rating 25 kA, thermal and magnetic setting with provided leads on iron frame as per specification no. SW-SWR/MCCB.

5-5-2 (Item No.155) Providing and erecting 3 Pole MCCB of 200A, 415V capacity with S.C. rating 25 kA, thermal and magnetic setting with provided leads on iron frame as per specification no. SW-SWR/MCCB.

5-6-5 (Item No.156) Providing, erecting and commissioning 4 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 40A complete as per specification no. SW-RCCB/RCCB

5-7-1 (Item No.157) Providing and erecting floor/ wall mounting, MCCB Panel Board suitable for 4 core incoming 250A, 2 way four pole outgoing on provided iron frame, as per specification no. SWR/MCCBPB.

5-10-2 (Item No.158) Supplying and erecting iron clad cut out HC type 415V 32A erected on polished wooden block complete.

5-10-3 (Item No.159) Supplying and erecting iron clad cut out HC type 415V 63A erected on polished wooden block complete.

5-10-23 (Item No.160) Supplying & erecting 415V 32A porcelain base neutral link complete erected in provided MS box complete.

5-10-24 (Item No.161) Supplying & erecting 415V 63A porcelain base neutral link complete erected in provided MS box complete..

6-1-1 (Item No.162) Supplying and erecting metal work in CRCA sheet with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.

6-1-14 (Item No.163) Supplying and erecting marine plywood 18/19 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners, supports, nut bolts etc. complete.

6-3-2 (Item No.164) Supplying and erecting static energy meter with 240V 50 Hz. AC supply 10 to 60 A, ISI mark, accuracy class 1.0 with backlit LCD display, (measuring and display kWh, V, I, kW, six month history of energy and MD in kVA ) with transparent hinge type box complete erected on polished teak wood board duly wired with required size of weather proof PVC wires duly tested by electric supply company.

6-3-4 (Item No.165) Supplying and erecting static energy meter 440 V 50 Hz. 100A ISI mark meter AC 3 phase 4 wires LCD/LED display complete erected on polished teak wood board duly wired with required size of weather proof PVC wires duly tested for class II accuracy by electric supply company.

7-1-29 (Item No166) Supplying, erecting & terminating XPLE armoured cable 4 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

7-1-30 (Item No.167) Supplying, erecting & terminating XLPE armoured cable 4 core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

7-1-31 (Item No.168) Supplying, erecting & terminating XLPE armoured cable 4 core 35 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

7-1-32 (Item No.169) Supplying, erecting & terminating XLPE armoured cable 4 core 50 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

7-2-8 (Item No.170) Supplying, erecting & terminating XLPE armoured cable 2 core 2.5 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

7-2-9 (Item No.171) Supplying, erecting & terminating XLPE armoured cable 2 core 4 sq mm copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

7-2-31 (Item No.172) Supplying, erecting & terminating XLPE armoured cable 4 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

7-2-32 ( Item No.173) Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

7-2-33 (Item No.174) Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

7-2-35 (Item No.175) Supplying, erecting & terminating XLPE armoured cable 4 core 25 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

7-4-1 (Item No.176) Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 2.5 to 16 sq. mm. cable, with necessary material as per specification no. CB-JT/LT

7-4-2 (Item No.177) Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 25 to 50 sq. mm. cable, with necessary material as per specification no. CB-JT/LT

7-7-2 (Item No.178) Supplying & erecting Siemens type brass cable glands for 3 to 4 core 6 sq. mm. /2 to 4 core 10 sq. mm. for XLPE armoured cable as per specification No. CB-GL

7-7-3 (Item No.179) Supplying & erecting Siemens type brass cable glands for 3 to 4 core 16 sq. mm. /3 to 4 core 25 sq. mm. /3 core 35 sq. mm. for XLPE armoured cable as per specification no. CB-GL

7-8-5 (Item No.180) Supplying & erecting water tight terminal box of cast iron of size 200 x 150 x 150 mm complete on pole as per specification no. CBSB

7-8-8 (Item No.181) Supplying & erecting FRP box of size 300 x 200 x 125 mm, 2.7 mm thick complete on pole/wall as per specification no. CB-SB

7-9-1 (Item No.182) Supplying & erecting crimping type copper lugs for cable up to 16 sq. mm. complete as per specification no. CB-CL/CU

7-9-2 (Item No.183) Supplying & erecting crimping type copper lugs for cable 25 sq. mm. complete as per specification no. CB-CL/CU

7-9-3 (Item No.184) Supplying & erecting crimping type copper lugs for cable 35 sq. mm. complete as per specification no. CB-CL/CU

7-11-8 (Item No.185) Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.

7-11-9 (Item No.186) Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 400 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.

8-1-1 (Item No.187) Supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm. dia with 4.5x3.65x3.25 mm thickness (4.5 + 1.75 + 1.75 m) length respectively and total 8 m long with pole cap, base plate in provided foundation.(weight 101 kg.) as per specification no.OH-PL/STP

8-1-3 (Item No.188) Supplying and erecting steel tubular swaged pole 165.1 x 139.7 x 114.3 mm. dia with 4.5 x 4.5 x 3.65 mm thickness ( 5 + 2 + 2 m ) length respectively and total 9 m long with pole cap, base plate in provided foundation.

8-1-16 (Item No.189) Supplying and erecting ISI mark G.I. pipe pole ‘B’ grade 80 mm dia 6 m long with pole cap, base plate in provided foundation as per specification no. OH-PL/GIP

8-3-3 (Item No.190) Supplying and erecting 16 m (clear height) High Mast (Top-150mm, Bottom- 360mm) with lowering and raising motorized unit, lantern carriage assembly suitable for max. 8 nos. luminaries and its control gear box, lightning finial arrangement for fixing aviation light and foundation bolts on provided foundation as per specification no. OH-PL/HM (excluding luminaries).

8-3-5 (Item No.191) Supplying and erecting 20 m (clear height) High Mast (Top-150mm, Bottom- 460mm) with lowering and raising motorized unit, lantern carriage assembly suitable for max. 8 nos. luminaries and its control gear box, lightning finial arrangement for fixing aviation light and foundation bolts on provided foundation as per specification no. OH-PL/HM (excluding luminaries).

8-3-8 (Item No.192) Supplying and erecting 9m (clear height) fixed type High Mast (Top- 100mm, Bottom- 200mm) with hexagonal/round bracket and foundation bolts suitable for max. 4 nos floodlight fixtures on provided foundation as per specification no. OH-PL/OPL (excluding luminaries).

8-3-33 (Item No.193) Supplying and erecting Outdoor Stand Mounted Feeder Pillar for highmast of the same manufacturer with 63A TPN MCB incomer, single dial timer switch, 45A TP contactor for automatic switching of luminaries, 2 nos 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables erected in min. 14 SWG CRCA sheet box powder coated with supporting angles, self-lock, gasket and slanting top erected with CC foundation complete .

8-8-2 (Item No.194) Dismantling the existing pole above 6 m height with brackets,clamps, insulators, stay from the cement concrete foundation and making the site clear by refilling the pits with excavated materials and bringing it to the ground level.

9-1-3 (Item No.195) Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP

9-1-4 (Item No.196) Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EAEP

9-2-3 (Item No.197) Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP.

9-2-5 (Item No.198) Supplying and erecting GI earth wire of high purity of different sizes used for earthing or any other purposes on wall with necessary G.I. Clamps fixed on wall/cable/ conduit with screws in an approved manner.

12-1-2 (Item No.199) Supplying and erecting Centrifugal water pump (Monoblock), 230V, Single phase 50 cycles A.C. supply of 0.75 KW/1 HP with discharge 1.6/2.9 Litres per second (LPS) for head of 9/22 m & 40 mm suction/ 40 mm delivery pipe on provided C.C. foundation as per specification no. WP-CGP

12-1-4 (Item No.200) Supplying and erecting Centrifugal water pump (Monoblock), 230V, Single phase 50 cycles A.C. supply of 1.5 KW/2 HP with discharge 7.16/4.16 Litres per second (LPS) for head of 12/21 m & 50 mm suction/ 50 mm delivery pipe on provided C.C. foundation as per specification no. WP-CGP

12-1-6 (Item No.201) Supplying and erecting Centrifugal water pump (Monoblock), 415V, three phase 50 cycles A.C. supply of 2.25 KW/ 3 HP with discharge 2/4.9 Litres per second (LPS) for head of 14/36 m and 50 mm suction/ 40 mm delivery pipe on provided C.C. foundation as per specification no. WP-CGP

12-1-10 (Item No.202) Supplying and erecting Centrifugal water pump (Monoblock), 415 V, three phase 50 cycles A.C. supply of 3.75 KW/5 HP with discharge 5.8/8.5 Litres per second (LPS) for head of 20/36 m and 65 mm suction/ 50 mm delivery pipe on provided C.C. foundation as per specification no. WP-CGP

12-3-1 (Item No.203) Supplying and erecting submersible pump set suitable for erection on open well of 2.25 KW/3 HP with 415 V 50 c/s.A.C. supply, having delivery head from 21 to 7 m and discharge from 200 to 800 Itrs. per minute (Max efficiency at 16 m head & 500 Itr discharge) & pipe of Suction 50mm /Delivery 50 mm diameter erected with necessary H type clamps as per specification no. WP-OSP

12-3-2 (Item No.204) Supplying and erecting submersible pump set suitable for erection on open well of 3.75 KW/5 HP with 415 V 50 c/s.A.C. supply, having delivery head from 24 to 13m. and discharge from 400 to 1000 Itrs. per minute (Max efficiency at 21m head & 680 Itr discharge) & pipe of Suction 50mm / Delivery 50 mm diameter rected with necessary H type clamps as per specification no. WP-OSP

12-3-4 (Item No.205) Supplying and erecting submersible pump set suitable for erection on open well of 5.625 KW/7.5 HP with 415 V 50 c/s.A.C. supply, having delivery head from 36 to 18m. and discharge from 400 to 1000 Itrs. per minute (Max efficiency at 29m head & 680 Itr discharge) & pipe of Suction 75mm / Delivery 50 mm diameter rected with necessary H type clamps as per specification no. WP-OSP

12-3-5 (Item No.206) Supplying and erecting 1 phase, 230 V, 50 Hz, submersible pump set of 0.75 KW/1HP for erection on open well, pump having discharge 35 / 270L.P.M., head 30 / 15 m & pipe of Suction 32 mm/Delivery 25 mm diameter erected with with necessary H type clamps as per specification no. WP-OSP

12-3-6 (Item No.207) Supplying and erecting 1 phase, 230 V, 50 Hz, submersible pump set of 1.5 KW/2HP suitable for erection on open well, pump having discharge 130 / 475 L.P.M., head 21 / 9 m & pipe of Suction 50 mm /Delivery 50 mm diameter erected with necessary H type clamps as per specification no. WP-OSP

12-4-1 (Item No.208) Supplying and erecting D. O. L. Starter suitable for 250V. Single phase, 50 cycles with overload element with necessary materials and connected to supply upto 3 H.P.

12-4-2 (Item No.209) Supplying and erecting D.O.L. Starter 400V. 3 phase, 50 cycles with no volt coil and overload element with necessary materials and connected to supply upto 7.5 H.P.

12-4-5 (Item No.210) Supplying and erecting fully automatic star / delta starter suitable for above 15 HP to 25 HP sqirrel cage motor totally enclosed withoverload andno volt relaycomplete erected onprovided angle frame.

12-4-7 (Item No.211) Supplying and erecting pump protection relay comprising current sensing phase failure and UV+OV relay with dry run and overload protection suitable for 3 phase pumps.

12-4-8 (Item No.212) Supplying and erecting flat flexible 3 core 2.5 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

12-4-9 (Item No.213) Supplying and erecting flat flexible 3 core 4 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

12-4-26 (Item No.214) Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c.Submersible/centrifugal pump set upto 10 HP consisting of Star Delta starter having relay range 6-10 Amp, S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc.

12-4-28 (Item No.215) Supplying & erecting Float sensor switch for water level controller working on 250V & rated current 8A, with 2 mtr. wire & High quality of wire & plastic body.

12-6-1 (Item No.216) Supplying & erecting Pressure Booster Pump, single phase, 50C/s, A.C. supply of 0.375 KW/ 0.5 H.P., for Domestic Pressure boosting applications in bungalows, apartments, hotels etc for constant pressure for Bathrooms.

12-6-2 (Item No.217) Supplying & erecting Pressure Booster Pump, single phase, 50C/s, A.C. supply of 0.375 KW/ 1 H.P., for Domestic Pressure boosting applications in bungalows, apartments, hotels etc for constant pressure for Bathrooms.

12-7-7 (Item No.218) Attending breakdown of water pump and associated accessories for fault finding including minor repairs & put in working condition & submit the report of inspection to the engineer in-charge.

13-6-27 (Item No.219) Supplying & erecting gun metal gate valve of size 20 mm dia complete as per specification no. FF-VL/GV

13-6-28 (Item No.220) Supplying & erecting gun metal gate valve of size 25 mm dia complete as per specification no. FF-VL/GV

13-7-5 (Item No.221) Supplying & erecting high pressure poly propylene hose pipe 19 mm dia complete as per specification no. FF-FFA/HOP

13-7-9 (Item No.222) Supplying & erecting gun metal chrome plated nozzle, 19 mm dia complete as per specification no. FF-FFA /NZ

16-1-1 (Item No.223) Making trench of suitable width and depth in soft soil for laying provided LT cable up to and including 16 sq.mm complete as per specification no. CW-EXN-CTR

16-1-2 (Item No.224) Making trench of suitable width and depth in hard murum / tar road for laying provided LT cable up to and including 16 sq. mm complete as per specification no. CW-EXN-CTR

16-3-2 (Item No.225) Making cement concrete foundation including excavation ( 45 x 45 x 120 ) cm deep in 1:3:6 cement concrete, 20 to 25 mm stone metal, (45 x 45 x 45) cm / 45 cm dia. x 45 cm height plinth duly plastered, with necessary curing and finishing complete. (for 6 m pole)

16-3-4 (Item No.226) Making cement concrete foundation including excavation (60 x 60) cm x deep 1/6 of pole length in 1:3:6 cement concrete 20 x 25 mm stone metal, 45 cm x 45 cm x 45 cm /45 cm dia. x 45 cm. height plinth duly plastered, with necessary curing and finishing complete. (for 9 m poles)

16-3-5 (Item No.227) Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for pumps).

16-3-14 (Item No.228) Making M- 20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 20 m raising lowering high mast) .

16-4-2 (Item No.229) Painting of pipe pole upto 6 m length along with street light / pole brackets / clamps etc by scrapping the existing paint complete. Specification no CW -PTG/PTP.

16-4-3 (Item No.230) Painting of steel tubular / rail / RSJ pole above 6.0 m length along with street light pole brackets, clamps etc by scrapping the existing paint complete. Specification no CW -PTG/PTP.

16-5-2 (Item No.231) Supplying and erecting ISI mark GI pipe 20 mm. dia. ‘B’ class at position with accessories complete. Specification no. CW-PLB/GP.

16-5-3 (Item No.232) Supplying and erecting ISI mark GI pipe 25 mm. dia. ‘B’ class at position with accessories complete. Specification no. CW-PLB/GP.

16-5-4 (Item No.233) Supplying and erecting ISI mark G.I. pipe 32 mm dia. ‘B’ class at position with accessories as per specification no. CW-PLB/GP

16-5-5 (Item No.234) Supplying and erecting ISI mark G.I. pipe 40 mm dia. ‘B’ class at position with accessories as per specification no. CW-PLB/GP

16-5-6 (Item No.235) Supplying and erecting ISI mark G.I. pipe 50 mm dia. ‘B’ class at position with accessories as per specification no. CW-PLB/GP

16-5-10 (Item No.236) Supplying and erecting ISI mark G.I. pipe 32 mm dia. ‘C’ class at position with accessories as per specification no. CW-PLB/GP

16-5-11 (Item No.237) Supplying and erecting ISI mark G.I. pipe 40 mm dia. ‘C’ class at position with accessories as per specification no. CW-PLB/GP

16-5-12 (Item No.238) Supplying and erecting ISI mark G.I. pipe 50 mm dia. ‘C’ class at position with accessories as per specification no. CW-PLB/GP

16-5-13 (Item No.239) Supplying and erecting ISI mark G.I. pipe 65 mm dia. ‘C’ class at position with accessories as per specification no. CW-PLB/GP

16-5-14 (Item No.240) Supplying and erecting ISI mark G.I. pipe 75/80 mm dia. ‘C’ class at position with accessories as per specification no. CW-PLB/GP

16-5-17 (Item No.241) Supplying and erecting high density polythene pipe ISI mark 40 mm dia. suitable for pressure of 6 kg/cm2 connected to jet/submersible pump with required material complete.

16-5-18 (Item No.242) Supplying and erecting high density polythene pipe ISI mark 50 mm. dia. suitable for pressure of 6 kg. / cm2 connected to jet/submersible pump with required material complete

16-6-1 (Item No.243) Supplying and erecting 25 mm dia. Gun metal foot valve at position with necessary materials.

16-6-2 (Item No.244) Supplying and erecting 40 mm dia. Gun metal foot valve at position with necessary materials.

16-6-3 (Item No.245) Supplying and erecting 50 mm dia. Gun metal foot valve at position with necessary materials.

16-6-8 (Item No.246) Supplying and erecting 40mm dia. cast iron foot valve at position with necessary materials

16-6-9 (Item No.247) Supplying and erecting 50mm dia. cast iron footvalve at position with necessary materials.

16-6-11 (Item No.248) Supplying and erecting 75/80mm dia. cast iron footvalve at position with necessary materials.

16-6-13 (Item No.249) Supplying & Erecting 25 mm gun metal sluice valve at position with necessary materials.

16-6-19 (Item No.250) Supplying and erecting non return valve 25 mm dia in position made of gun metal complete.

16-6-20 (Item No.251) Supplying & Erecting 40 mm gun metal sluice valve at position with necessary materials.

16-6-21 (Item No.252) Supplying & Erecting 50 mm gun metal sluice valve at position with necessary materials.

16-6-25 (Item No.253) Supplying and erecting C.I. flange 25mm dia with necessary nuts bolts and washers with rubber seal in position.

16-6-26 (Item No.254) Supplying and erecting C.I. flange 40mm dia with necessary nuts bolts and washers with rubber seal in position.

16-6-27 (Item No.255) Supplying and erecting C.I. flange 50mm dia with necessary nuts bolts and washers with rubber seal in position.

16-6-29 (Item No.256) Supplying and erecting C.I. flange 75/80mm dia with necessary nuts bolts and washers with rubber seal in position.

18-1-1 (Item No.257) Rewinding motor of table / pedestal / wall bracket / cabin fans including minor repairs lubricating of ball bearings & bush bearing, and replacing condenser, screws etc. Testing of fan for original speed and consumption with guarantee for 1 year including transportation from site to workshop and back.

18-1-3 (Item No.258) Rewinding motor of the 1200/1400 mm ceiling fan and over hauling including minor repairs lubricating of ball bearings & bush bearing, and replacing condenser, screws etc. Testing of fan for original speed and consumption with guarantee for one year.

18-1-7 (Item No.259) Rewinding of electric motor upto 1 H.P. single phase upto 1400 RPM with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing condenser, screws etc. Testing the motor for original speed and no load consumption with guarantee for one year.

18-1-9 (Item No.260) Rewinding of electric motor above 1 HP and upto 2 HP, three phase upto 1400 RPM with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load consumption with guarantee for one year

18-1-10 (Item No.261) Rewinding of electric motor above 2 HP and upto 3 HP, three phase upto 1400 RPM with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load consumption with guarantee for one year

18-1-11 (Item No.262) Rewinding of electric motor above 3 HP and upto 5 HP, three phase upto 1400 RPM with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load consumption with guarantee for one year

18-1-19 (Item No.263) Rewinding of submersible pump motor in borewell of all types and makes upto and including 5 HP with coated copper wires & overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed, H.P. and no load consumption & guarantee for one year.

18-1-20 (Item No.264) Rewinding of submersible pump motor in borewell of all types and makes above 5 H.P. upto 25 HP with coated copper wires & overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed, H.P. and no load consumption & guarantee for one year.

18-3-3 (Item No.265) Supplying and erecting No-Volt-Coil for motor having DOL starters upto 7.5 H.P.

18-3-4 (Item No.266) Supplying and erecting No-Volt-Coil for motor having DOL starters from 7.5 H.P. to 10 H.P.

18-3-11 (Itam No.267) Supplying and erecting thermal Overload Relay for motor starter suitable for up to 12.5 HP.

MR (Item No.268) Supplying and erecting 25 mm Tee, bend, union & elbow etc for supporting of plumbing work.

MR (Item No.269) Supplying and erecting of water out put stand with at position with necessary materials.

MR (Item No.270) Repairing of electric motor pump of all type and makes above 1 HP to 2 HPwith replacing ball bearing, bush bearing, screws etc

MR (Item No.271) Repairing of electric motor pump of all type and makes above 3 HP to 5 HPwith replacing ball bearing, bush bearing, screws etc.

MR (Item No.272) Repairing of submersible motor pump of all type and makes above 1 HP to 5 HPwith replacing ball bearing, bush bearing, screws etc.

MR (Item No.273) Supplying and fixing PVC Neppal.

MR (Item No.274) Providing & fixing the PVC beg etc protected by steel net with the support of iron frame water proof ply wood in the pond with all needed materials & labour.

MR (Item No.275) Supplying and fixing PVC Pipe Clamp.

MR (Item No.276) Supplying and fixing Union dia. 50 mm with all necessary materials.

MR (Item No.277) Supplying and fixing Coplin dia. 50 mm with all necessary materials

MR (Item No.278) Supplying and fixing Bend dia. 50 mm with all necessary materials

MR (Item No.279) Supplying and fixing Albo dia. 50 mm with all necessary materials

MR (Item No.280) Supplying and erecting C.I. cover 75/80 mm dia mtr. with necessary material as per site requirement.

MR (Item No.281) Supplying and erecting C.I. Bend 75/80 mm dia mtr. with necessary material as per site requirement.

MR (Item No.282) Supplying and fixing 65mm PVC flexible Pipe.

MR (Item No.283) Supplying and fixing 80mm PVC flexible Pipe.

MR (Item No.284) Supplying and fixing 110mm PVC flexible Pipe.

MR (Item No.285) Supplying and fixing 40mm PVC Pipe.

MR (Item No.286) Supplying and fixing 25mm PVC Pipe.

MR (Item No.287) Removing the Submersible motor pump from the water and cleaning the sunction line and repairs other minor problem of electrical part of the site.

MR (Item No.288) Removing the sunction pipe line and cleaning the footvalve and minor repairs of electrical part of the site.

MR (Item No.289) Providing Cement concrete work for cable trunch size 100 cm x 40 cm x 10cm with necessary curing and finishing in an appvd manner on the top.

MR (Item No.290) Providing cement concrete foundation including excavation for the poles (45 cms. x 45 cms x 1.2 Mtr.) deep in 1:3:6 cement concrete ( 20 to 25 mm stone metal) and 45 cm x 45 cm. x 45 cm. / 45 cm dia. x 45 cm. height plinth duly plastered and with necessary curing and finishing in an approved manner. (for 8.5 to 9 Mtr. pole)

MR (Item No.291) Supplying and erecting G.I. foundation bolt size 3000 mm x 25 mm with base plate.

MR (Item No.292) Erection the 9 meter long pole with 4 way decorative bracket and 4 Light fitting set in instruction of site Engineer.

MR (Item No.293) Supplying of Decorative Street light bracket suitable for 4 x 250 W HPSV/ LED Street light set with all necessary materials as per site requirement.

MR (Item No.294) Scrapping the existing paint & painting of decorative street light bracket completely as per site requirement.

MR (Item No.295) Supplying and fixing of the holder of gate lamp / street light set with wiring.

MR (Item No.296) Supplying & erecting bracket suitable for single Integral bollard fitting & walkover two way light made from 50 mm. dia B class G.I pipe with necessary MS plate etc.

MR (Item No.297) Supplying & erecting MS bracket suitable for Under water light fitting with all needed material.

MR (Item No.298) Supplying & erecting MS bracket suitable for Wall light fitting with all needed material.

MR (Item No.299) Making the structure suitable for path finder by chipping, cutting of RCC with all necessary material and labour charges.

MR (Item No.300) Supplying and erecting Hotdeep galvanised strip of size 25 mm. x 3 mm. mark clamp use for fixing of J/box and cable with all charges.

MR (Item No.301) Supplying and erecting garden light fitting with 450 mm. dia clear acrylic bowl suitable for upto 11 w CFL lamp on provided pipe as perspecification no. FG - OD F/GLT

MR (Item No.302) Suppling and erecting garden light fitting with 600 mm. dia Opal acrylic Diamond Shape with bollard suitable for one 9/ 11 w CFL lamp on provided pipe as per specification

MR (Item No.303) Supplying and fixing meter box for single phase with removing the damaged box with all necessary materials

MR (Item No.304) Supplying and fixing meter box for three phase with removing the damaged box with all necessary materials

MR (Item No.305) Supplying and fixing of the street light PVC cover fixing on the top at the site with all attachment.

MR (Item No.306) Shifting of fans, tube light & boards with all needed materials including all charges.

MR (Item No.307) Cleaning of ceilling fan

MR (Item No.308) To remove the gate lamp after disconnection of electricity & cleaning by surf water then refixing the same as per site requirement.

MR (Item No.309) Supplying and erecting pipe post made from ISI mark G.I. pipe 50 mm. dia 3 meter overal length, with two bends, fixed to pipe at the top / round bended, complete erected with M.S. flat welded wall with necessary clamps, nuts and bolts etc. duly painted with two coats of aluminium paint complete.

MR (Item No.310) Supplying and erecting pipe post for street light made from ISI mark G.I. pipe 75 mm. dia 3meter over all length, complete erected with M.S. flat welded wall with necessary clamps, nuts and bolts etc. duly painted with two coats of aluminium paint complete.

MR (Item No.311) Attending the complaint & minor fault repairs.

MR (Item No.312) Supplying and erecting ISI mark midget type 3.0 Ltr Instant type water heater of ABS plastic body 3 KW comling IS3412 heating element 230/250 V 50 cycle A.C. supply with inlet & outlet

MR (Item No.313) Supplying and erecting storage type vertical water heater flow rate 1.8 to 10 ltr / min, 5500 W 230 V, 50 Hz AC and size 360mm X 120mm X 260mm with high impact resistance body on wall.

MR (Item No.314) Supplying and erecting Street light bracket for erection of Tripal fitting made from 40 mm. dia ‘B’ class G.I. pipe 0.6 m in length along with pole cap of 300 mm length 100 mm dia duly welded.

MR (Item No.315) Supplying & erecting Street light bracket suitable for Alu. street light with all necessary materials as per site requirement.

MR (Item No.316) Supplying & erecting bracket for single fitting made from 25 mm. dia B class G.I pipe duly welded as with MS structures.

MR (Item No.317) Meter Liationing charges

MR (Item No.318) Supplying and erecting Timmer switch.

MR (Item No.319) Supplying and erecting 32A Single pole 230 VAC contactor

MR (Item No.320) Supplying and erecting 63 A 4 pole 415 VAC contactor

MR (Item No.321) Supplying and erecting 100A 4 pole 415VAC contactor

MR (Item No.322) Supplying and erecting PVC Water tank 1000 ltr on suitable foundation.

MR (Item No.323) Make the provision in the window frame and remove the glass and fix the 18 mm waterproff ply suitable for exasust fan

MR (Item No.324) Supplying and erecting of plumbing work inlet connection with outlet connection for vertical water heater with stop cork, pipe, nipple, Tee, bend, connector clamp etc.

MR (Item No.325) Removing the 20 HP submersible motor pump after vacant water tank with help of other motor pump and refixing the same motor with help of chain and man power.

MR (Item No.326) Repairing of autometic control panel for 3 Ph, 415 volt, A. c. Submersible/Centrifugal pump set upto 20 HP with relay range 26-42 AMP, S.P.P., Combined ammeter/ voltmeter, phase indicating lamp including labour charges.

MR (Item No.327) Supply of 150 bar Portable pressure washer, 230V, single phase 50 cycle A.C. supply of 1 HP of specified discharge 9.6 LPM suction capacity.

MR (Item No.328) Supply of High Pressure water Spray Gun.

MR (Item No.329) Supplying & erecting approved make white stove enamelled/ powder coated CRCA sheet not less than 0.7 mm thick chalk board type fluo fitting of 2 x 28W T5 with Electronic ballast,having pf > 0.9 fixed in false ceiling or on wall as per specification No. FG-IDF/MOP

MR (Item No. 330) Supply and Installation for IP 2MP Bullet Outdoor Camera as per the Technical Specifications

MR (Item No. 331) Supply and Installation for 16 channel NVR

MR (Item No. 332) Supply and Installation 4TB Interna; SATA Hard Drive

MR (Item No. 333) Supplying and erecting 8 Port OOE switch

MR (Item No. 334) Supplying and erecting 32" inch LED TV

MR (Item No. 335) Supplying and erecting outdoor weatherproof box for switch

MR (Item No. 336) Yearly Supply of Security cum Operator cum Electrician at Shahid Bhagat Singh subway near Jessal park in MBMC area. (Total Operator per day are 3, and total days 365) 3 X 365 days = 1095 units