SPL REPAIR TO BLDG NO T-118, T-209 AND T-90, SPL REPAIR TO DRAIN AT VARIOUS LOCATIONS AND SPL REPAIR OF BER REFERIGERATOR AND DEEP FREEZER AT MIL STN DHARCHULA.

Amount

DESCRIPTION OF ITEMS

Demolition of cement concrete in ground floor,paving nexc 15cm thick(below or above GL) complete all as specified and directed.

Demolition of brick work, stone/boulder masonary built in cement mortar complete all as specified and directed.

M&L precast cement concrete block masonry with solid blocks of plain cement concrete 1:3:6 type C1 (using 20mm graded crushed stone aggregate) exc 10 cm in width and setting in CM 1:6 complete all as specified and directed.

M & L cement concrete 1:2:4 type B1 (20mm aggregate) in coping complete all as specified and directed.

M & L cement concrete 1:2:4 type B2 (20mm aggregate) in surface channel complete all as specified and directed.

M & L Rendring 15mm thick in cement mortar 1:4 on block masonry surface or other than fair faces of brick work finished even and smooth without using extra cement complete all as specified and directed.

Demolition reinforced cement concrete in any description and in any position complete all as specified and directed.

M&L for Precast RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in drain cover slabs, size required at site include necessary formwork complete all as specified and directed.

M & L Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.

M&L for Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc.Fe-410-0 Gde E-250 Quality A complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware,AC or Reinfoced concrete),150 mm dia, set in cement mortar,including excavation and making good complete all as specified and directed.

S&F reinforced concrete pipes, class NP3,150mm dla laid and jointed complete with collars, complete all as specified and directed.

M&L for concrete bed 1:4:8 type D-2 (Using 40 mm graded stone aggregate) as in drain pipes including packing under, and haunching against the side of pipes after the are laid and tested for 150 mm bore pipe, complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and no pigment complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L for 75mm thick PCC 1:3:6, type C-2, as in Plinth protection etc finished even & smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metre and at change in direction complete all as specified & directed.

M&L for brick work with sub class 'B' brick old size bricks, straight or curved on plan exc 6 m mean radius, built in cement mortor 1:6 complete all as spfd & directed.

Taking down cement plaster on brick or stone walls, of any description including raking out joints, hacking for key, scrubbing down with water, etc complete all as spfd and directed.

M&L 10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces including finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L three coats of white wash on wall surfaces including prepration of new plastered surfaces complete all as specified and directed

Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 sqm but nexc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

S&F for powder coated anodised aluminium frame for doors, windows ventilator with one or more rebates including joining cleat for fixing etc , screws, hinges, brackets, dash fastners/rawl plugs etc. complete all as specified and directed

S&F powder coated aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary jointing cleats glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed.

S&F powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified and directed.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard sectionand fixed to the existing window frame with C.P. brass/ stainless,steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge complete all as specified and directed.

M&L for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floors 150mm long all as specified and as directed.

S&F brass 4 levers Mortice lock,vertical type,size 100 mm complete all as specified and directed.

S&F 4.80 mm thick sheet glass ordinary quality and glazing with rubber packing and beading in square exc 0.50 sqm in each panels complete all as specified and directed.

S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Dismantling mild steel work of any description and in any position complete all as specified and as directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and gastenings and heavy brackets framing (beam, tee, angle channel or flat sections) (Fe-290 Gde E-165) inicluding distance pieces, cleats etc. complete all as specified and directed.

S & F in repair Harrison rails/curtain rods, mild steel, chromium plated with brackets,stops, rollers etc fancy type as approved complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets,fittings etc. as specified and directed.

M&L for 6mm thick Plywood, grade BWR, type BB, fixed in ceiling and walling with screws to timber frame work complete all as sfd and directed.

M&L II nd class hard wood plain fillets square or rectangular in section cleansawn but bullnosed chamfared or rounded on one edge or face sectional area exc 3 sqcm and nexc 6 sqcm secured in nails complete all as specified and directed.

Dismantling of timber scantling 40 sqcm and over in section in any position for unframed works complete all as specified and directed.

M&L for 2nd class hard wood as in scantling clean sawn framed & fixed complete all spfd & directed.

Dismantling of timber scantling 40 Sqcm under in section in any position, fixed with nails unframed work complete all as spfd & directed.

M&L for II nd class hard wood plain fillets squaree or rectangular in section clean sawn secured with nails sectional area exc 13 sqcm and n.exc 25 sqcm complete all as specified and directed.

M&L for one coat of creasote oil to wooden surfaces new or old of any description including prepration of surfaces complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting of any guage/thickness in roof covering/wall clading complete all as specified and directed.

S&F 0.63 mm th galvanised corrugated mild steel sheeting with two corrugation side lap fixed with 'L' type or 'J' type or cranked hook bolts fixed to roof covering/cladding to wall complete all as specified and directed.

S&F 0.63 mm th galvanised corrugated mild steel sheeting with two corrugation side lap fixed with 'L' type or 'J' type or cranked hook bolts fixed to roof covering/cladding to wall except sheeting complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for two coat of synthetic enamel paint over a coat of pink primer to new wooden surface of any description exc 10 cm girth or width including prepration of new wooden surfaces complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer to steel surfaces of any description over 10 cm in width or girth incl preparation of new steel surfaces complete all as spfd and directed.

M & L preparing old previously treated surfaces of steel surface as in corrugated/plain sheets as in roof covering /wall or other surfaces over 10 cm girth or width by cleaning straightening if any removing rust and making good where required and applying Two coat of synthetic enamel paint on old steel surfaces complete all as specified and directed.

M & L for 40mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) finished even and smooth using extra cement incl dividing strips complete all as specified & directed.

S&F Pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

M&L Cement concrete type C1 1:3:6 (20 mm graded stone aggreagte) as in filling inside pressed steel chowkhats complete all as specified and directed.

S&F 35 mm th Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for 2nd class hardwood, 35 mm thick glazed and skelton shutter, open rebated and prepared to receive glass, gauge, etc. devided into squares, with plain, chamfered or rounded , mitred and rebated shash bars any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass etc; size of members of shutter as specified in SSR Part I, Sectioin 8 clause 8.24(a); supplied and fitted to chowkhat complete all as specified and directed.

S&F Steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

-ditto- all as sl no. 55 above but without glazing bar

S & F MS work as in window guard bars,holdfasts etc., plain, let in and fixed independently in wooden frames etc, and similar articles conforming to Fe 290 Gde E 165 complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each panels complete all as specified and directed.

S&F 150 mm aluminium handles, cast type anodised complete all as specified and directed.

S&F150 mm aluminium anodised barrel tower bolts extruded section complete all as specified and directed.

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 100 mm Mild Steel barrel tower bolts, stove enamelled, black with bright bolts complete all as specified and directed.

S&F 375mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F False Ceiling Horizontal level regular edge grid 600 x 600 mm form work using hot dip sections and fixing tiles vinyl laminated MPL gypsum panels size 595x595x6 to 8mm thick after lamination, suspended the grid with grid hangers to Roof Truss / RCC Slab all as spfd and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Roughening surfaces of old concrete floor by picking ,sweeping clean and washing down with water to remove dust etc.complete all as specified and directed.

M/L for non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm and not exceeding 0.18 sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified and directed.

M/L for non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm and not exceeding 0.18 sqm, in skirting over and including 10mm thick screed in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc and making good disturbed surfaces of walls, floors etc all as specified.

M&L point wiring with 1.5 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor FRLS cable in open/ surface PVC conduit of suitable size, complete with all accessories/fitting and heavy duty PVC terminal switch board for mounting switches, sockets, regulators of suitable size with plastic module surface sheet top cover open recessed on all and brass screw and washer including unsheathed single core PVC insulated cable green in colour 1.5 Sqmm multistranded copper conductor as contineous earth wire and connecting to earth dolly complete all as specified for one light point/fan point controlled by one way switch of 5/6 Amps complete all as specified and directed.

-ditto- all as per item No. 72 above but for one 3/5 pin socket outlet point on same board controlled by one way switch of 5 Amps

-ditto- all as per item No. 72 above but for one 3/5 pin socket outlet point on independent board controlled by one way switch of 5 Amps

M&L power point wiring with 2.5 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor cable in open/surface PVC conduit of suitable size, complete with all accessories /fitting and heavy duty PVC terminal switch board for mounting switches, sockets of suitable size with plastic module sheet top cover open recessed on all and brass screw and washer including unsheathed single core PVC insulated cable green in colour 2.5 Sqmm multistranded copper conductor cable as earth wire and connecting to earth dolly complete all as specified and directed for 3/5 pin, 15/16 Amps power socket controlled by one no, one way switch of 15/16 Amps complete all as specified.

S&F switch piano flush button single pole one way 5 Amps complete all as specified.

S&F switch piano flush button single pole one way 15 Amps complete all as specified.

S&F socket out let 3 pin 5/6 Amps flush type complete all as specified.

S&F socket out let two in one 3 pin 5/6 Amps and 3 pin 15/16 Amps, flush type, non shutters, non interlocking complete all as specified.

S&F ceiling rose, surface bakelite, AC, 60x30mm, 3 terminals complete all as specified.

S&F lamp holder PVC /poly carbonated type with back plate suitable for batten fittings complete all as specified.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified.

Supply and fixing in replacement sheet metal enclosure for DB SPN 8 way with 200 Amps rated busbar 240 Volts, double door suitable for housing MCBs and isolators complete all as specified.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of sinlge poles of current carrying capacity 6 to 40 Amps, in the MCB DB complete with connection testing and commissiong all as specified.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of sinlge poles and neutral of current carrying capacity 32 Amps, in the MCB DB complete with connection testing and commissiong all as specified.

S&F in replacement LED tube light 4' long along with all fixtures and fittings, internally pre wired and including connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size, 20 watt complete all as specified.

S&F LED bulb 12 watts, natural white, surge protection range 7-10KV, voltage protection range upto 400 V AC , system efficiency more than 120 Lm/watt complete all as specified.

S&F in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified.

S&F 1x35 watt LED building security light fitting, with and including GI bracket made out of 1.5 mtr GI pipe bent to shape light grade of 40mm dia, bracket clamps nut bolts and washers etc and making electric connection with 3 core 1.5 sqmm PVC insulated copper conductor cable incl taking down old/unsv bldg sec light fitting complete all as specified.

Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and blades and depositing to MES store complete all as specified.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick, buried directly in ground (earth pit not less then 2.25 metres deep below ground level) with top edge of the plate not less then 1.5 metres below normal ground level, conneted to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, cheek nuts and washers of galvanised or iron protected by 15 mm bore GI pipe (medium grade) and connected to main switch board as directed including concrete pit in PCC (1:3:6) type C1 precast RCC (1:2:4) type B1 cover slab 40x40 Cm x 6Cm reinforced with 8 mm dia deformed bar @ 5 cm c/c with one handle for lifitting made out of 8 mm dia MS bar, funnle, wire mesh, 20 mm bore GI pipe (medium grade) for watering including charcoal and salt in alternative layers necessary excavation and earth work in any type of soil and testing complete all as shown on electrical plate No-3 of SSR part-I, 2009.

S&F fan hook, made of Fe-290 Gde E-165 iron round bar 10mm in size for hanging ceiling fan as per site requirement complete all as specified.

Supplying and fixing 1100 volts grade heavy duty 10 sqmm cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable circular complete all as specified.

Supply and fix changover switch 4 pole, 63 Amp conform to IEC 60947-3, IS/IEC 60947-3, manual changeover in sheet steel (SS) enclosure and suitable for verical mounting incl making necessary connection complete all as specified.

Supply and fix Automatic changeover switch with current limiter, CO, single phase with current ratings of 30 A on main side as well as 30 A on DG side and conforming to IEC 60947-6, IEC 60947-3 complete all as specified.

Supply, install and commissioning of metal top Deep freezer, single phase 240 volts 50 Hz, hard top 300 litre capacity having single door/double door complete all as specified and directed.

Supply and fix single door refrigerator, electric driven (single phase), of capacity 292 ltrs 4 Star rated with invertor compressor type complete all as specified.

Supply and fix single door refrigerator, electric driven (single phase), of capacity 200 ltrs 5 Star rated with invertor compressor type complete all as specified.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 1 KVA complete all as specified and directed.

Note : Tenderers may note that amount of credit Rs 94,900.32 will be deducted from the total amount arrived, at the time of Acceptance of contract.

m/s vishnu kumar agarwal (BID ID -3131263)

M/S M K CONSTRUCTION (BID ID -3131155)