REPAIRS AND MAINTENANCE OF INTERNAL ELECTRIFICATION AND CONNECTED WORK AT OTM AND CGRA AT DHQ 7 PARADIP UNDER GE I CG BHUBANESWAR

Amount

Taking down carefully ceiling fan of any size by disconnecting the wire and dismantling blades and including the rates of carriage & transporting the same to contractors workshop for re-winding/painting of the same including refixing or depositing E/M store yard as directed by Engr-in-charge after Servicing/oiling, greasing and overhauling of ceiling fans of any size/type at site by using appropriate grade of oil/Grease and cleaning all parts of fan internally and externally and applying greasing, oiling of bushes or bearings including replacement of all worn out parts such as bush/ bearing, split pin, rubber reel, nuts and bolts, fan condenser, plastic canopy, blade, outer cover, rotor,stator ,replacement of copper flexible twin core of suitable length including reassembling for fixing the same complete all as specified and directed. Note:(i) Parts /components will be measured and paid separately underappropriate item as supply only. (ii) Electrician with helper along with T&P and Ladder will be provided by the contractor and rate quoted are inclusive of same. (iii) Minor consumable items like (MS nut bolt ,washer , split pin) if replaced , rates are quoted inclusive of the same items. (iv) Unserviceable items shall be the property of contractor as schedule credit.

Taking down carefully Exhaust fan /wall mounted fan of any size or any sweep by disconnecting the wire and dismantling blades and including the rates of carriage & transporting the same to contractors workshop for re-winding/painting of the same including refixing or depositing E/M store yard as directed by Engr-in-charge after Servicing/oiling, greasing and overhauling of ceiling fans of any size/type at site by using appropriate grade of oil/Grease and cleaning all parts of fan internally and externally and applying greasing, oiling of bushes or bearings including replacement of all worn out parts such as bush/ bearing, split pin, nuts and bolts, fan condenser, blade, outer cover, replacement of copper flexible twin core of suitable length including reassembling for fixing the same complete all as specified and directed. Note:(i) Parts /components will be measured and paid separately underappropriate item as supply only. (ii) Electrician with helper along with T&P and Ladder will be provided by the contractor and rate quoted are inclusive of same. (iii) Minor consumable items like (MS nut bolt ,washer , split pin) if replaced , rates are quoted inclusive of the same items. (iv) Unserviceable items shall be the property of contractor as schedule credit.

supply only celling fan stator size (48 inch) ,for 1200 mm sweep including copper winding ( running/Auxliary both) with insulation paper and proper connected with shaft(axel) complete all as specified and directed.

supply only exhaust fan motor for size 300 mm sweep, 220 V ,single phase , copper winding ISI marked complete all as specified and directed.

Rewinding of motor of AC ceiling fan, of any make/type and size (1200mm sweep) with super enamelled copper wire of appropriate gauge as existing to obtain the specified and satisfactory RPM as per manufactures specification, including replacement of all insulation materials, varnishing, heating, drying and also including lubricating, reassembling of state/rotor, connection & testing complete all as specified and directed. Note:- Fan will be issued from AGE E/M store yard through gate pass after entering in ledger

All as per item No 5 here-in-before but for exhaust fan of size from 450 MM sweep.

All as per item No 5 here-in-before but for exhaust fan of size from 300 MM sweep.

All as per item No 5 here-in-before but for exhaust fan of size from 200 MM sweep.

All as per item No 5 here-in-before but for wall mounted fan of 400 mm sweep.

supply only for Replacement of defective ball bearing (ISI marked) for ceiling/table/pedestal/Air-circulators fan of any size complete all as specified and directed. (Bearing make/size SKF-6201/6202/6203/6204 or equivalent make of NBC )

Supply only for Replacement of gun mental bush suitable for any type/model/size of fans complete all as specified and directed. Make:- As per sample/ Existing.

Supply only for Replacement of defective capacitor of size 0.75/2.5 /3.15 mfd for any type of fans suitable for 250 V including making connection complete all as specified and directed. Make:- (USHA/Havells/Tibcon)

Supply only for Replacement of defective capacitor of size 4 mfd for any type of fans suitable for 250 V including making connection complete all as specified and directed. Make:- (USHA/Havells/Tibcon)

Supply only for replacement of PVC insulated twin twisted copper conductor cable 1100 V grade of size 0.75 Sqmm, fixed in repair, complete all as specified and directed.

M&L for painting of fan (ceiling fan / exhaust fan/wall mounted fan ) any sweep with applying one coat of synthetic enamel paint (Ceiling Fan -White Paint and Exhaust fan - Gray Paint ) by spray machine , filling of cavity by filler with and including writing of MES No. of fan as per existing with permanent marker complete all as specified and directed.

Supply only for Replacement of ceiling fan blade set 1200 mm sweep for ceiling fan colour - white of any make and model aero dynamically balanced including screws for fixing with fan complete all as specified and directed. Make: BAJAJ/USHA/ Havells/ Crompton.

Supply only for Replacement of rigid aluminium as per Sample obtain from site. fan blade for exhaust of capacity 300/450mm including locking nut complete all as specified and directed.

Supply only for Replacement of PVC canopy suitable for 1200mm sweep ceiling fan complete all as specified and directed.

Supply only for Replacement of PVC connector 4 way 6 amps with PVC clamp for holding capicitor with connection screw, nuts of any type and size complete all as specified and directed.

Supply and Fix in replacement of louver shutter (with Mosquito net made out Aluminium wire cloth 0.36 mm nominal dia ) made out GI sheet (Thickness of louver shutter Body 1mm ,shutter Fins 0.5 mm fixed with 3 mm GI wire ) for Exhaust fan 300 mm sweep including proper fixed with screw in wall at existing Hole complete all as specified and directed.

S & F in repair electronic fan regulator,100W ,230V ,50Hz type electronic fan regulator flush type on the existing phenolic laminated sheet, etc. as required complete all as specified and directed. Make- Anchor/Leader/Standard

S&F in replacement switch piano type, 5 Amp. SP, one way complete all as specified and directed. Make- Anchor/ Havells/Bajaj/ CG as approved by GE.

S&F in replacementSwitch socket combination 2 in 1, 5 Amp flush type complete all as specified and directed. Make- legrand/Anchor/ Havells/ as approved by GE.

S&F in replacement Socket outlet 3 pin, 5 Amp, flush type complete all as specified and directed. Make- legrand/Anchor/ Havells/ as approved by GE.

S&F in replacement Switch socket combination 5A/16A, 5 in 1 flush type complete all as specified and directed. Make- Anchor/ Havells/Bajaj/ CG as approved by GE.

S&F in replacement switch bell push, flush type, 5 Amp complete all as specified and directed. Make- Anchor/ Havells/Bajaj/ CG as approved by GE.

S&F in replacement bell, AC, 230 V, Single Pole, complete all as specified and directed. Make Anchor/leader/ Bajaj as approved by GE.

S&F in replacement bell, AC, 230 V, multi music type, complete all as specified and directed. Make Anchor/leader/ Bajaj as approved by GE.

S&F in replacement, modular switch flush type, 6 Amp. SP, one way ,1 module complete all as specified and directed. Make- Anchor/ Havells/Bajaj/ CG as approved by GE.

S&F in replacement, modular switch flush type, 16 Amp. SP, one way ,1 module complete all as specified and directed. Make- Anchor/ Havells/Bajaj/ CG as approved by GE.

S&F in replacement modular socket outlet,Socket, 6A-2/3 pin combined 2 module complete all as specified and directed. Make- Anchor/ Havells/Bajaj/ CG as approved by GE.

S&F in replacement modular socket outlet,Socket, 6A/16A-2/3 pin combined 2 module module complete all as specified and directed. Make- Anchor/ Havells/Bajaj/ CG as approved by GE.

S&F in repair modular bell push, flush type, 5 Amp,1 module complete all as specified and directed. Make- Anchor/ Havells/Bajaj/ CG as approved by GE.

S&F of Ceiling rose 3 phase, PVC/ Polycarbonate body complete all as specified and directed.

S & F Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), SPN, 240 volt, 8 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete and including taking down old unserviceable DB's and all disturbed surfaces of wall shall be made good to match the existing wall finishes complete all as specified and directed. Make- L&T/Havells/C&S/legrand/hager.

S & F Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), SPN, 240 volt, 4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete and including taking down old unserviceable DB's and all disturbed surfaces of wall shall be made good to match the existing wall finishes complete all as specified and directed. Make- L&T/Havells/C&S/legrand/hager.

S & F Power line vertical type DB double door 4 way suitable for MCCB 100 amps sheet steel enclouser with detachable gland plates for flush / surface mounting with bus bar neutral link and Earth Bar in concealed and including taking down old unserviceable DB's and all disturbed surfaces of wall shall be made good to match the existing wall finishes complete all as specified and directed. Make- L&T/Havells/C&S/legrand/hager.

S & F in replacement MCB SP 6 to 32 Amp,C series , 230 Volts and including taking down old unserviceable /broken MCB complete all as specified and directed. Make - L&T/Havells/C&S/legrand/hager.

S & F MCB SPN 6 to 32 Amps, C series, 230 Volts and including taking down old unserviceable /broken MCB complete all as specified and directed. Make - Standard/ Havells/ C&S

S & F MCB SPN 40 Amps, C series, 230 Volts and including taking down old unserviceable /broken MCB complete all as specified and directed. Make - Standard/Havells/C&S

S & F MCB TPN 63 A "C" series 415 Volt and including taking down old unserviceable /broken TPN complete all as specified and directed. Make : C&S/Standard/Havells

S & F MCB TPN 40 A "C" series 415 Volt and including taking down old unserviceable /broken TPN complete all as specified and directed. Make : C&S/Standard/Havells

S & F MCCB 4 Pole 415V Fixed type 100A with breaking capicity 16 KA 415 Volt and including taking down old unserviceable /broken MCCB complete all as specified and directed.

taking down down the existing unserviceable wires of any type from concealed wiring carefully of aluminium/copper point wiring (light, fan, bell, socket, power point etc.) with or without conduit, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator,sunken box etc complete all as specified and directed.

Taking out sub main wiring only any size of aluminium conductor cable PVC insulated with or without condiut complete all as specified and directed.

M&L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor FR PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through existing conduit including provn of 1.5 sqmm single core multistranded copper conductor FR PVC insulated and unsheathed as earth wire continuity with new plastic laminated white coloured top sheet cover 3.0 mm thick on new sunken box including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition) complete all as specified and directed.

One light point/Fan point controlled by one, one way switch single pole piano type

One 3 pin 5 Amp socket outlet on the same board .

One 3 pin 5 Amps socket out let on independent board

One bell point controlled by one bell push

One light point controlled by two, two way switches.

Point wiring 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board complete all as specified and directed.

S&F switch piano type, 5 Amp. SP, one way complete all as specified and directed. Make- Anchor/ Havells/Bajaj/ CG as approved by GE.

S&F switch socket outlet, 5 pin, 5 Amp, piano type complete all as specified and directed. Make- legrand/Anchor/ Havells/ as approved by GE.

S&F switch socket combination 2 in 1, 6 pin 5 and 15 Amp flush type universal complete all as specified and directed. Make- Anchor/ Havells/Bajaj/ CG as approved by GE.

M&L for sub main wiring with two run of 4.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 4 Sq mm drawn through PVC conduit and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition), complete all as specified and directed. Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length.

All as per item No 52.00 hereinbefore but 2x6.0 sqmm + 1x6.0sqmm earth wire

Supply only single phase Electronic tamper proof energy meters with LCD display of 5-30A capacity 230V AC 50Hz conforming to IS:13779 / IEC:1036 / CBIP88 ISI marked with suitable lead wire and connecting up incomming and outgoing cable connetions to meter including earthing of meter including testing and commisioning complete all as specified and directed. Make: L&T /HPL

Supply only Three phase smart Electronic tamper proof energy meters with LCD display of 10-60A capacity 230V AC 50Hz conforming to IS:13779 / IEC:1036 / CBIP88 ISI marked and celing the meter(Top & Bottom covers) with suitable lead wire and connecting up incomming and outgoing cable connetions to meter including earthing of meter including testing and commisioning complete all as specified and directed.Make: L&T /HPL

Supply and fix in repairs Heating element of 1500 watts suitable for 25 ltrs capacity water heater complete all as specified and directed. Make - Universal/Bajaj

Supply and fix in repairs Thermostat element suitable for 25 Ltrs water heater complete all as specified and directed. Make - Universal/Denfoss/Shiram.

Supply and fix LED light fitting of 20 watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down of U/S LED fittings and deposite to E/M store yard complete all as specified and directed. Note: Unserviceable items shall be the property of contractor as schedule credit.

Supply and fix LED light fitting of 10 watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down of U/S LED fittings and deposite to E/M store yard complete all as specified and directed. Note :- Unserviceable items shall be the property of contractor as schedule credit.

A P ENTERPRISES

PABITRA MOHAN PARIDA

M/S T.N.CONSTRUCTION