Construction and redevelop of various types of civil and Electrical Works of Shri Madanlal Dhingra Udhyan at F.P.No. 35 in T.P.Scheme No. 21 (Bhestan) in South Zone- A (Udhana), Surat.

Name of Work :- Construction and redevelop of various types of civil, and Electrical Works of "Shri

Madanlal Dhingra Udhyan" at F.P.No. 35 in T.P.Scheme No. 21 (Bhestan) in South Zone- A (Udhana),

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

PART - I (CIVIL WORKS )

Excavation for foundation including sorting out and stacking

of useful materials and disposing of the excavated stuff up to

50 mt. lead and all lift, watering etc. complete.

(A) Loose or soft soil with manual labour

(1) Upto 1.5 Mt. Depth 220.00 117.26 C. M.

SMC SOR 23-24, ITEM NO.-

Boring holes 2.5 mt. deep in ordinary soil (for cast in situ

piles) and disposal of surplus excavated soil as directed

within a lead of 50 mt. for following diameter of piles.

SMC SOR 23-24, COMPUND WALL & OTHER MISC ITEM NO.-

Providing and laying cement concrete 1:4:8 (1 cement :

sand : 8 graded stone aggregates 40 nominal size) and curing

3 complete including cost of form work but excluding the cost 20.00 2680.21 C. M.

of reinforcement etc. complete in foundation and plinth.

SMC SOR 23-24, ITEM NO.-

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5

sand:3 graded stone agg. 20 mm nominal size) & curing

comp. Includ.cost of form work but exclu. Cost of

reinforcement for reinforced concrete work in :

(a) Foundation, footing,base of columns & mass concrete. 19.00 4146.15 C. M.

SMC SOR 23-24, ITEM NO.-

Providing and laying ordinary cement concrete 1:1.5:3

( 1 cement, 1.5 sand, 3 graded stone aggregates 20 mm

5 nominal size ) finishing smooth curing etc. complete

including cost of form work but excluding cost of

reinforcement for reinforced concrete work (R.C.C.) in :

(1) Having cross section area upto 0.08 sq.mt Ground Floor

(2) Having cross section area more than 0.08 sq.mt and upto

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

(1) Having cross section area upto 0.08 sq.mt 19.00 9102.61 C. M.

(2) Having c/s area more than 0.08 s.m. & upto 0.12 s.m 0.00 8174.41 C. M. -

(3) Having cross section area more than 0.12 sq.mt. 0.00 7086.88 C. M. -

SMC SOR 23-24, ITEM NO.-

Providing and laying cement concrete 1:3:6 (1 cement :

coarse sand : 6 crushed stone aggregates 20mm nominal

size) and curing complete including cost of form work etc.

complete in wall caps/ copings.

SMC SOR 23-24, ITEM NO.-97

Providing & fixing IS Mark TMT Bar FE 500 / FE 500D

7 reinforcement for R.C.C. work incl. bending, binding & 8348.00 76.21 Kg

placing in position etc. comp. Upto G.L./P.L.

SMC SOR 23-24, ITEM NO.-

Filling in trenches with available excavated soil in layers not

8 exceeding 20 cm. in depth consolidating each deposited 356.00 130.39 C. M.

layer by ramming and watering etc. complete.

SMC SOR 23-24, ITEM NO.-

Providing & construction brick work using Fly Ash bricks

having crushing strength not less than 70 Kg./sq.cm. in

foundation & plinth in C.M. 1:6 (1 cement:6 sand ) etc.

comp. - Ground Floor

SMC SOR 23-24, ITEM NO.-

Providing and applying 20mm. thick sand faced cement

plaster on walls or similar surfaces at all floor levels

consisting of 12 mm. average thick backing coat of cement

mortar 1:3 (1 cement : 3 sand) and 8 mm. thick finishing coat

of cement mortar 1:1 (1 cement : 1 sand) etc.comp

SMC SOR 23-24, ITEM NO.-

Providing 20 mm. deep finished groove in plaster in line and

level etc. complete (M.R.)

SMC SOR 23-24, ITEM NO.- 30(MR)

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

Providing and applying two coats of weathershield max

paint (3 coats may be required in case of darker colours) of

ICI Dulux or Apex Ultima of Asian paint including applying

exterior acrylic primer coat as per manufacturers

specification and directions in shade and colour approved by

architects, on exterior surfaces of the building including

scaffolding, preparing the surface, watering, curing etc.

complete and as directed by the architects and

12 Surface preparation:

Surface is thoroughly clean, dry and free from all loose dirt,

chalk, grease, funfi, algae and flaking paint. This can be

achieved by brushing with a wire / stiff coir brush, followed

by water jetting if required. Fill up all minor cracks and

defects with white cement and sand mixture in the ratio 1:3.

For application on previously painted wall, previous coatings

of paint must be thoroughly scraped off and clean the

surface thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to

dry for 4-5 hours. application of putty is not recommended. 663.00 82.00 S.M.

Minimum 4-6 hours duration is required between each coat

of weather shield max paint.

SMC SOR 23-24, COLOR WORK ITEM NO.-

Providing & fixing M.S.Grills of required pattern to wooden

frames of windows etc. At all floor levels with M.S. flats at

required spacing & frame around square or round bars with

round headed bolts and nuts or by screws incl. Priming coat

of Red lead paint etc.comp. (A) Plain grill For all Floors

SMC SOR 23-24, ITEM NO.-

Providing and Fixing Hollow steel Sections Framed Work including

Cutting, Hoisting, Welding & Fixing in position Purlin, Main Chord

etc. as per Engineer in-charge.TATA / JINDAL / ASIAN Make for

Main entry gate etc.

SMC SOR 23-24, ITEM NO.-132 450.00 126.00 Kg.

Applying Priming coat over new steel and other metal

surface after over and including preparing the surface by

throughly cleaning oil, grease dirt and other foreign matter

and scoured with brushed fine steel wool, scrapers and sand

paper with ready mixed priming paint brushing red lead.

SMC SOR 23-24, COLOR WORK ITEM NO.-

Painting one coat (excluding priming coat) on Previously

Painted steel and other metal surface with synthetic enemal

16 paint, burshing to give an even shade including cleaning the 200.00 38.03 S.M.

surface of all dirt, dust and other foreign matters.

SMC SOR 23-24, COLOR WORK ITEM NO.-

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

Painting two coat (excluding priming coat) on new steel and

other metal surface with synthetic enemal paint, burshing to

give an even shade including cleaning the surface of all dirt,

dust and other foreign matters.

SMC SOR 23-24, COLOR WORK ITEM NO.-

Steel work welded in built up sections,frame work including

18 cutting, hoisting, fixing in position and applying apriming

coat of red lead paint :-

(A) In beams and joists channels angles, tees, flats with

connection plats or angle cleats as in main and cross beams,

hip and trussed purlins connected to common raffers and

SMC SOR 23-24, ITEM NO.-98 10.00 9047.86 QUINTAL

Demolition including stacking of serviceable materials with

all lead and lift. (i)) RCC Work

SMC SOR 23-24, ITEM NO.- 1, Demolition items,Pg -18

Demolition of brick work and stone masonry including

stacking of serviceable materials and disposal of

unserviceable materials with all lead and lift. (i) On Cement

SMC SOR 23-24, ITEM NO.- 2, Demolition items,Pg -18

Removing and scraping of old deteriorated plaster of any

thickness from wall / RCC member including stacking of

serviceable material and disposal of unserviceable from site

of work with all lead and lift.

SMC SOR 23-24, ITEM NO.- 3, Demolition items,Pg -18

TOTAL FOR PART A - COMPOUND WALL

GROUND DEVELOPMENT WORKS

Clearing and grubbing road land including uprooting rank

vegetation grass bushes,shrubs,sapling and trees girth up to

1 300 mm removal of stumps of trees cut earlier and disposal 1.11 108824.63 Hectare

of unserviceable materials (B) By manual in area of thorny

R&B SOR 23-24, ITEM CODE.- 26117B, ITEM NO.-

Providing & filling in plinth with murum/yellow soil or

2 selected soil (Garden soil) in layers of 20 cm. Th'. Incl. 339.00 289.06 C.M.

watering, ramming & consolidation etc. complete.

SMC SOR 23-24, ITEM NO.-

Providing & filling with Mix soil in layers of 20 cm. Th'. Incl.

watering, ramming & consolidation etc. complete.

SMC SOR 23-24, GROUND DEVELOPMENT WORK ITEM NO.

Excavation for foundation including sorting out and stacking

of useful materials and disposing of the excavated stuff up to

50 mt. lead and all lift, watering etc. complete.

(A) Loose or soft soil with manual labour

(1) Upto 1.5 Mt. Depth 0.00 117.26 C. M. -

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

SMC SOR 23-24, ITEM NO.-

Demolition including stacking of serviceable materials with

all lead and lift. (i)) RCC Work

SMC SOR 23-24, ITEM NO.- 1, Demolition items,Pg -18

Demolition of brick work and stone masonry including

stacking of serviceable materials and disposal of

unserviceable materials with all lead and lift. (i) On Cement

SMC SOR 23-24, ITEM NO.- 2, Demolition items,Pg -18

Removing and scraping of old deteriorated plaster of any

thickness from wall / RCC member including stacking of

serviceable material and disposal of unserviceable from site

of work with all lead and lift.

SMC SOR 23-24, ITEM NO.- 3, Demolition items,Pg -18

Dismentaling tiled of stone floors laid in mortar including

stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.-Kota Stone

flooring/Tiles flooring / Dedo

SMC SOR 23-24, ITEM NO.- 10, Demolition items,Pg -18

Preparation of subgrade with Compacting, Levelling and

consolidation of subgrade with miniroller /plate vibrator

9 machine including watering and filling in depressions which 1133.00 4.93 S.M.

occur during the process as directed by engineer in charge

SMC SOR 23-24, GROUND DEVELOPMENT WORK ITEM NO.-

Providing & laying Granular sub base (GSB) confirming to

Grading-II of Table 400.0 of compacted thick of 150mm with

specified graded stone metal and sand mixed in place and

laid with mechanical means spreading with motor grader

10 and compacting with vibratory roller having minimum 80- 170.00 1418.04 C.M.

100 KN static weight to achieve desired density of 98% of

MDD including all material, labour, machinery with all leads

and lift etc. complete.

SMC SOR 23-24, GROUND DEVELOPMENT WORK ITEM NO.-

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6

Crushed stone agg 20m.m Nominal size)&curing comp. excl.

cost of form work in :(a) foundation & Plinth

SMC SOR 23-24, ITEM NO.-

Providing & laying ordinary cement con.1:1.5:3(1cement :1.5

sand : 3 graded graded stone agg. 20 mm nominal size)

12 finishing smooth curing etc. comp. Incl.. Cost of form work

but excl. Cost of reinforcement for R.C.C. Work in :

(B) Vertical and horizontal fins 0.00 10831.75 C. M. -

SMC SOR 23-24, ITEM NO.-

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

Providing & laying cement concrete Pavement using 1:1.5:3

(1 cement:1.5 sand:3 graded stone agg. 20 mm nominal size)

13 & Vaccuum Dewatering technique including floating surface 170.00 5981.00 C. M.

with a skim powder floater, curing etc.

SMC SOR 23-24, GROUND DEVELOPMENT WORK ITEM NO.-

Providing and laying 200 micron plastic sheet on prepared

sub base For V.D.S Concrete

SMC SOR 23-24, GROUND DEVELOPMENT WORK ITEM NO.-

Cutting of Groove 5 to 7 mm thick in VDS for depth 1/3 of

15 total thickness with filling of epoxy sealent as directed by 1000.00 50.00 R. M.

engineer in charge

SMC SOR 23-24, GROUND DEVELOPMENT WORK ITEM NO.-

Providing & fixing IS Mark TMT Bar FE 500 / FE 500D

16 reinforcement for R.C.C. work incl. bending, binding & 9660.00 76.21 Kg

placing in position etc. comp. Upto G.L./P.L.

SMC SOR 23-24, ITEM NO.-

Supplying & filling fine sand(pana) in 75 mm/100 mm/150

mm compacted thickness over the base including necessary

17 compaction, watering etc. complete. Item includes leveling 85.00 413.09 C. M.

by using vibratory plates compacted machine and as

directed by engineer in charge.

SMC SOR 23-24, GROUND DEVELOPMENT WORK ITEM NO.-

Providing interlocking type Rubber moulded cement

concrete paver block of approved shape, design & colour

having 60mm thickness (M-35) purchased from SMC's

approved paverblock manufacturer only & fixing of fine sand

bedding. Item includes levelling by using vibratory plates

compacted machine. Item also includes all materials, labour,

equipments, tools, plants, watering, cleaning etc. complete.

with color 150.00 524.00 S.M.

without color 150.00 524.00 S.M.

SMC SOR 23-24, GROUND DEVELOPMENT WORK ITEM NO.-

Removing and resetting Existing paver block, including all

watering leveling, cleaning, labour & Equipments chagres

etc. complete as per details in tender specification & as

directed by engineer in charge.

with color 617.50 102.00 S.M.

without color 617.50 102.00 S.M.

SMC SOR ROAD 23-24, ROAD WORK ITEM NO.-

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

Providing and fixing precast Concrete GRASS PAVER block

60mm thick with grade of concrete M250 pnumatic

19 compressed by Mechanically pressed and as per 50.00 1081.00 S.M.

approved design including filling the joint with sand in

proper line & level etc.

RA-2-GRASS PAVER

Supplying & filling white sand compacted thickness over the

base including necessary compaction, watering etc.

20 complete. Item includes levelling by using vibratory plates 428.00 413.09 C.M.

compacted machine and as directed by Engineer in charge.

SMC SOR 23-24, GROUND DEVELOPMENT WORK ITEM NO.

Providing & fixing M.S.Grills of required pattern to wooden

frames of windows etc. At all floor levels with M.S. flats at

required spacing & frame around square or round bars with

round headed bolts and nuts or by screws incl. Priming coat

of Red lead paint etc.comp. (A) Plain grill For all Floors

SMC SOR 23-24, ITEM NO.-

Painting two coat (excluding priming coat) on new steel and

other metal surface with synthetic enemal paint, burshing to

give an even shade including cleaning the surface of all dirt,

dust and other foreign matters.

SMC SOR 23-24, COLOR WORK ITEM NO.-

Providing and fixing rebar of following diameter using

chemical grout of Swanchore/Hilti/Fischer or equivalent

make including cost of all equipments, tools, material,

labour, etc. Standard procedure as mentioned in

manufacturer's specifications shall be strictly followed,

which shall be submitted and got approved from the

authority prior to start of work. The rate shall also include

cost of drilling of hole of required diameter and depth as

23 mentioned in manufacturer's specification, cleaning the hole

with required air blower and other necessary tools and

tackles, positioning, providing and grouting chemical, allied

fixtures and fasteners, etc. but excluding the cost of

reinforcing bar etc. complete. Item includes necessary

scaffolding, staging, labour, tools and equipments, etc.

complete as directed by the engineer-in charge.

TOTAL FOR PART B - GROUND DEVELOPMENT WORKS

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

STORM WATER PIPE LINE

Excavation for pipe line trenches for water supply, sewerage

line, manhole-machinehole etc. all with shoring and struting

if required as per required gradient and line including safety

1 provisions using site rails and stacking excavated stuff

including up to all required lead cleaning the site etc.

complete for all lifts and strata as specified. A) In all sorts of

soil and soft murrum

(1) Up to 1.5 Mt. Depth 90.00 102.35 C.M.

SMC STORM DRG.SOR -2022-23

Providing, Lowering & laying joining R.C.C. NP2 CLASS Pipe In

C.M. 1:1 of following nominal internal diameters incl. Testing

of pipes and joints etc. Comp.

SMC SOR 23-24, ITEM NO-77

Providing, supplying, Carting, conveying, stacking, lowering,

laying and jointing NP3 Class ISI standard RCC pipes (of

sulphate resisting cement) in standard lengths of following

class and diameter suitable for either collar joints or spigot

socket rubber ring joints in proper position, grade and

alignment at all level including all taxes, insurance,

transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance from stores to site of work,

3 labour, giving hydraulic testing as per ISI code

etc.complete(IS 458/1989), as directed by engineer incharge.

Note:- one collar should be supplied with each full length

plain ended RCC pipe,cost included in rates below. Incase of

rubber ring should be supplied with each full length socketed

pipe,cost included in rates below. the pipe shall be place in

such a way that the another pipe can be pushed in

systematic manner so as to achieve the leak proof joint by

using rubber ring as per relevant IS.

For 250mm dia. Line 0.00 638.55 R.M -

For 300mm dia. Line 0.00 891.85 R.M -

For 450mm dia. Line (NP3) 150.00 1557.65 R.M

SMC STORM DRG.SOR -2022-23

Providing & construction simple chamber of 23 cm. th' B.B.

Masonary in C.M 1:5 with cement plaster 15 mm th' in C.M.

1:3 inside & outside to exposed faces, R.C.C. top slab with

1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone aggregate

20mm size) , Foundation concrete 1:5:10 & fixing C.I. cover

with frame to be not less than 38 kg. On top etc. comp.

Inside dimension 455 x 610 mm &450 mm deep for single

(A) Same as above but Precast RCC heavy duty cover instead

Extra for every additional depth of 0.1 mt. beyond 0.45 mt.

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

SMC SOR 23-24, ITEM NO-76

Providing and constructing manhole as per the type and design

with necessary excavation, P.C.C. 1:4:8,benching in 1:2:4, Flyash

lime brick masonary in CM 1:4, 12 mm thick inside cement plaster

5 in CM 1:3, 150 mm thick R.C.C. Slab 1:1.5:3,providing and fixing

polyproplene steps, providing heavy duty RCC pre-cast (M-20

grade) MH frame cover and fixing in CC 1:2:4 refilling trenches,

curing etc. complete.

TYPE-A Upto 600 mm DIA (1200 mm x 1000 mm)

Add. or ded. per every 10 cm increase or decrease in depth 0.00 653.00 NO. -

SMC STORM DRG.SOR -2022-23

Providing constructing brick masonary INLET CHAMBER OF

750*600*1500 mm internal dimension with necessary

excavation refilling 350 mm th Br. masonary in C.M 1:4,150

mm th. p.c.c. & benching in c.c. 1:2:4,12mm th. plaster in

C.M. 1:3 for inside & cement pointing in C.M. 1:3 for o/s,

prov. & fixing precast RCC frame & cover of M30 grade as

per drawing & specification.- Rate For 1.5 mt Depth

Add. or ded. per every 10 cm increase or decrease in depth

SMC STORM DRG.SOR -2022-23

Refilling pipeline trenches with available stacked excavated

stuff with ramming, watering, consolidating and disposal of

surplus stuff as directed by engineer in charge.

SMC STORM DRG.SOR -2022-23

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

Providing & Fixing P.V.C. pipes (SCH-40) of Prince /

Supreme / Jain / Astral / Tulsi / Finolex make for water

supply line at all floor levels incl. fixtures like bends, tees,

shoe etc joined with resin of approved brand &

8 manufacture etc. comp. Pipe shall be fixed on the wall the

help of clamp at every two meter C/C or shall be concealed

as directed including necessary fittings etc. including testing

of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

SMC SOR 23-24, ITEM NO-86

Making connection with the manhole by boringhole on the

masonary of manhole and jointing pipe with cement mortar

9 in prop. (1:2) insideaswell as outside of existing 1.00 1100.00 NO.

manhole,curing etc. complete as directed byEngineer-in-

charge. (a) upto 900mm dia

SMC STORM DRG.SOR -2022-23

Dewatering by pumping set of required capacity including

temporary plaform carting pumping at site and fixing the

same in position including all accessories, and fuel and

labour etc. complete.

SMC STORM DRG.SOR -2022-23

providing and fixing abonite ball cock of approved qualities

directed etc. comp. (A)25mm. Dia.

SMC SOR 23-24, ITEM NO-82

TOTAL FOR PART - E (WATER STROME PIPE LINE)

GAZZEBO (2 Nos.)

(A) WORK UPTO PLINTH LEVEL

Excavation for foundation upto 1.5m. Depth including sorting out

1 and stacking of useful materials and disposing of the excavated

stuff up to 50 mt. lead.

(A) Loose Or Soft Soil

SMC SOR 23-24, Item no.-1

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) &

disposal of the surplus excavated soil as directed within a lead of

50 Mt. For following diameter of piles. (2) 250 m.m.

SMC SOR 23-24,Item no.-94

Providing and laying cement concrete 1:2:4 (1-Cement : 2- Coarse

sand : 4- graded stone aggregates 20 mm nominal size) and curing

3 complete including the cost of form work but excluding 46.00 3637.34 C.M.

reinforcement of reinforced concrete work in (A) Foundation and

SMC SOR 23-24,Item no.-95

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3

graded stone agg. 20 mm nominal size)& curing comp. Includ.cost

4 of form work but exclu. Cost of reinforcement for reinforced 4.00 4146.15 C.M.

concrete work in : (A) Foundation, footing, Base of columns and

SMC SOR 23-24,Item no.-6

Providing & laying ordinary cement con.1:1.5:3 (1cement:

1.5sand: 3 graded stone agg. 20 mm nominal size) finishing

5 smooth curing etc. comp. Incld. Cost of form work but excl. Cost

of reinforcement for R.C.C. Work in : Up to G.L./P.L. (A)

(1)Having c/s area up to 0.08 s.mt 1.00 12632.6 C.M.

SMC SOR 23-24,Item no.-7

Providing & laying ordinary cement con.1:1.5:3 (1cement:

1.5sand: 3 graded stone agg. 20 mm nominal size) finishing

6 smooth curing etc. comp. Incld. Cost of form work but excl. Cost

of reinforcement for R.C.C. Work in : Up to G.L./P.L. (B) BEAMS :

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 5.00 8174.41 C.M.

SMC SOR 21-22,Item no.-7

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work

7 including bending, binding and placing in position complete upto 1876.00 76.21 Kg.

floor two level

SMC SOR 21-22,Item no.-8

Providing & construction brick work using Fly Ash bricks having

crushing strength not less than 70 Kg./sq.cm. in foundation &

plinth in C.M. 1:6 (1 cement:6 sand ) etc. comp. Up to G.L./P.L.

SMC SOR 21-22,Item no.-9

Providing & filling in plinth with murrum/yellow soil or selected

9 soil in layers of 20 cm. Th'. Incl. watering, ramming & 45.00 289.06 C.M.

consolidation etc. complete.

SMC SOR 21-22,Item no.-11

Providing & applying 20mm.th. Sand faced cement plaster on

walls or similar surfaces at all floor levels consisting of 12 mm. Av.

10 th'. Backing coat of C.M. 1:3( 1 cement :3 sand) & 8 mm.th. 67.00 330.88 S.M.

Finishing coat of C.M.1:1 (1 cement: 1 sand)--- Upto G.L./P.L

SMC SOR 21-22,Item no.-12

Providing & Laying green polished kota stone slab flooring at all

floor levels,over 20 mm av.th.base of C.M. 1:6(1cement: 6 sand)

11 laid over&joined with grey cement slurry incl. Rubbing & polishing 80.00 989.45 S.M

etc. comp. (A) 25 mm. (Tolerance +/- 2mm) For all Floor

SMC SOR 21-22,Item no.-32

(B) WORK ABOVE PLINTH LEVEL

Providing & construction brick work using Fly Ash bricks having

crushing strength not less than 70 Kg./sq.cm. in foundation &

plinth in C.M. 1:6 (1 cement:6 sand ) etc. comp. - Ground Floor

SMC SOR 21-22,Item no.-16

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

Providing & Applying 15mm.th.cement plaster in single coat on

brick/ concrete walls similar surfaces for plastering & finished

even & smooth with a floating coat of cement slurry mixed with

admixture of lime or neeru in required proportion etc. comp. in

C.M 1:3 (1 cement : 3sand) (A) For wall and similar surfaces.

SMC SOR 21-22,Item no.-25

Providing & laying granite slab 18mm thick in flooring, treads of

steps and landing laid on bed of 20mm thick cement mortar 1:6 (1

Cement : 6 coarse sand) or lime mortar 1:1.5 laid and finished

with flush pointing in white or colour cement including rubbing 36.00 2410.00 S.M

and polishing complete. (Basic Rate:- Rs.1590.0/S.M.)

SMC SOR 21-22,Item no.-39

Providing & laying granite slab 18mm thick in skirting, risers of

steps, dedo and pillars laid on 10mm thick cement mortar 1:4 (1

15 Cement : 4 Coarse sand) and finished with flush pointing in white 198.00 2449.00 S.M

or colour cement including rubbing & polishing comp.. (Basic

Rate:- Rs.1590.0/S.M.)

SMC SOR 21-22,Item no.-40

Steel work, welded in built up sections framed work including

cutting, hoisting, fixing in position and applying a priming coat of

red lead paint. (A)In beams and joists, channels angles Tees, flats,

with connecting plates or angle cleats as in main and cross beams.

Hip and jack rafters, purlins conneted to common rafters and the

SMC SOR 21-22,Item no.-98

Painting two coats (excluding priming coat) on new steeland

other metal surface with enamel paint, brushing, interior to give

17 an even shade including cleaning the surface an even shade 40.00 65.31 S.M

including cleanicn the surface ofall dirt, dust and other foreign

SMC SOR 23-24,Colour Works, Item no.-8

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

Providing & applying two coats of weather shield max paint (3

coats may be required in case of darker colours.)of ICI Dulux or

Apex Ultima of Asian Paint including applying exterior acrylic

primer coat as per manufacturers specification and directions in

shade and colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface,

watering, curing etc. complete and as directed by the architects

and manufacturers.

Surface Preparation : surface is thoroughly clean, dry and free

from all loose dirt, chalk, grease, fungi, algae and flaking paint.

18 This can be achieved by brushing with a wire/ stiff coir brush, 134.00 82.00 S.M

followed by water jetting if required. Fill up all minor cracks and

defects with white cement and sand mixture in the ratio 1:3. For

application on previously painted wall, previous coatings of paint

must be thoroughly scraped off and Clean the surface thoroughly

using wire brushes.

Priming: Apply a liberal coat of exterior acrylic primer and allow it

to dry for 4-5 hours.

Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of

SMC SOR 23-24,Colour Works, Item no.-17

Providing & fixing colouron galvaniced steel, zinc / aluminium

allus coated sheet 0.5 mm. thick roofing fixed with gslvanised

grom J or L hook bolts and bolt 8mm dia with bituman and impet

washer filled with white lead etc. Excluding the cost of purlins

rafter and trusses. (Tata / Jindal or equivalent)

SMC SOR21-22,Item no.-101

TOTAL FOR PART - F (GAZEBO - 2 NOS.)

SECURITY CABIN TOILET, CARETAKER ROOM

WORK UP TO PLINTH

Excavation for foundation including sorting out and stacking off

1 useful materials and disposing of the excavated stuff up to 50 mt.

lead and all lift, watering etc.comp.

(A) loose or soft soil with machineries

SMC SOR 23-24, PAGE NO 1 IT NO

Providing & laying cement concrete 1:4:8 (1 cement:4 sand:8

2 graded stone agg. 40 mm nominal size) & curing comp. incl.cost 11.00 2680.21 C.M.

of form work in (A) Foundation and Plinth

(SOR SMC 2021-22, Pg No. 1, It No. 4)

Providing and laying ordinary cement concrete work 1:1.5:3 (

cement, 1.5 sand, 3 graded stone aggregates 20 mm nominal size

) & curing comp.including cost of form work but excluding cost of

reinforcement for reinforced concrete work in:

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

(A) foundation, footing, base of columns and mass concrete 12.00 4146.15 C.M.

(SOR SMC 21-22, It No.

Providing & laying ordinary cement con.1:1.5:3

(1cement:1.5sand:3 graded graded stone agg. 20 mm nominal

size) finishing smooth curing etc. comp. Incl.. Cost of form work

but excl. Cost of reinforcement for R.C.C. Work in :

(1) Having c/s area up to 0.08 s.mt 3.00 12,632.60 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 3.00 11,166.97 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 9,201.68 C.M. -

(SOR SMC 23,24, It No.

(B) BEAM: (G.B./P.B.)

(1) Having c/s area up to 0.08 s.mt 4.00 9102.61 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 5.00 8174.41 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 7086.88 C.M. -

(SOR SMC 23,24, It No.

Providing & fixing IS Mark TMT Bar FE 500 / FE 500D

5 reinforcement for R.C.C. work incl. bending, binding &

placing in position etc. comp. Upto G.L./P.L.

Upto G.L./P.L. 2670.00 76.21 KG.

(SOR SMC 2023,24, Pg No. 2, It No. 8)

Providing & construction brick work using Fly Ash bricks having

crushing strength not less than 70 Kg./sq.cm. in foundation &

6 plinth in C.M. 1:6 (1 cement:6 sand ) etc. comp. Up to G.L./P.L. 6.00 4,237.00 C.M.

(SOR SMC 2023-24, Pg No. 1, It No. 9)

Filling in trenches with available excavated earth in layer not

7 exceeding 20 cm in depth consolidating each deposited layer by 75.00 130.39 C.M.

ramming & waetring

(SOR SMC 2023-24, Pg No. 1, It No. 10)

Providing and filling in plinth with murrum/yellow soil or selected

8 soil in layers of 20cm thick including watering, ramming & 27.00 289.06 C.M.

cosolidation etc. complete

(SOR SMC 2023-24, Pg No. 1, It No. 11)

Providing and applying 20mm. thick sand faced cement plaster on

walls or similar surfaces consisting of 12mm. thick backing coat of

c.m. 1:3 ( 1 cement : 3 sand ) and 8mm. thick finishing coat of

c.m. 1:1 ( 1cement : 1 sand ) etc. comp.

(SOR SMC 2023-24, Pg No. 1, It No. 12)

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

Providing and applying two coats of weathershield max paint (3

coats may be required in case of darker colours) of ICI Dulux or

Apex Ultima of Asian paint including applying exterior acrylic

primer coat as per manufacturers specification and directions in

shade and colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface,

watering, curing etc. complete and as directed by the architects

and manufacturers.

Surface preparation:

Surface is thoroughly clean, dry and free from all loose dirt, chalk,

grease, funfi, algae and flaking paint. This can be achieved by

brushing with a wire / stiff coir brush, followed by water jetting if

required. Fill up all minor cracks and defects with white cement

and sand mixture in the ratio 1:3. For application on previously

painted wall, previous coatings of paint must be thoroughly

scraped off and clean the surface thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to dry

for 4-5 hours. application of putty is not recommended. Minimum 37.00 82.00 S. M.

4-6 hours duration is required between each coat of weather

shield max paint.

SMC SOR 23-24, COLOR WORK ITEM NO.-

Providing & Laying green polished kota stone slab flooring at

all floor levels,over 20 mm av.th.base of C.M. 1:6(1cement:

11 sand) laid over&joined with grey cement slurry incl. Rubbing 3.00 989.45 S. M.

& polishing etc. comp. (A) 25 mm. thick For all Floor

SMC SOR 23-24, ITEM NO.-

Providing & Laying polished kota stone of machine cut edge

slab 25 mm. th. in riser of steps, tread, dedo & pillars center

piece not less than 1.2 mt.in width &side pieces of equal size

as per design, laid on 10 mm.th. C.M.1:3(1 cement:3 sand)

joined & polishing etc. For all Floor

SMC SOR 23-24,, ITEM NO.-

Total amount upto plinth

Total amount upto plinth

WORK ABOVE PLINTH FOR GROUND FLOOR

Providing & laying ordinary cement con.1:1.5:3

(1cement:1.5sand:3 graded graded stone agg. 20 mm nominal

size) finishing smooth curing etc. comp. Incl.. Cost of form work

but excl. Cost of reinforcement for R.C.C. Work in

(1 )Having c/s area up to 0.08 s.mt

Ground Floor 3.00 12,632.60 C.M.

First floor 2.00 12,672.24 C.M.

(2) c/s area more than 0.08sq. mt. & upto 0.12 sq.mt

Ground Floor 0.00 11,166.97 C.M. -

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

First floor 0.00 11,206.61 C.M. -

(3) Having cross sectional area more than 0.12 sq. mt.

Ground Floor 0.00 9,201.68 C.M. -

First floor 0.00 9,241.32 C.M. -

(1 )Having c/s area up to 0.08s.mt -

Ground Floor 6.00 9102.61 C.M.

First floor 3.00 9142.25 C.M.

(2) Having c/s area more than 0.08 s.m. & upto 0.12 s.m

Ground Floor 0.00 8174.41 C.M. -

First floor 0.00 8214.05 C.M. -

(3) Having cross sectional area more than 0.12 sq. mt.

Ground Floor 0.00 7086.88 C.M. -

First floor 0.00 7126.52 C.M. -

(1) Slabs having more than 8cm. and upto 10 cm. thickness

Ground Floor 0.00 7,984.42 C.M. -

First floor 0.00 8,024.06 C.M. -

(2)Slabs having more than 10 cm. & upto 13 cm. thickness

Ground Floor 8.00 7,396.96 C.M.

First floor 3.00 7,436.60 C.M.

(3) Slabs having more than 13 cm. Thickness

Ground Floor 0.00 6,813.01 C.M. -

First floor 0.00 6,852.65 C.M. -

Ground Floor 1.00 9,531.24 C.M.

Ground Floor 3.00 5512.83 C.M.

(SOR SMC 21-22, Pg No. 2,It No. 13)

Providing & fixing IS Mark TMT Bar FE 500 / FE 500D

14 reinforcement for R.C.C. work incl. bending, binding &

placing in position etc. comp. Upto G.L./P.L.

Ground Floor 3175.00 76.21 KG.

First floor 1280.00 77.21 KG.

(SOR SMC 2021-22, Pg No. 2, It No. 15)

Providing & construction brick work using Fly Ash bricks having

15 crushing strength not less than 70 Kg./sq.cm. in foundation &

plinth in C.M. 1:6 (1 cement:6 sand ) etc. comp.

Ground Floor 44.00 4,511.97 C.M.

First floor 11.00 4,786.95 C.M.

(SOR SMC 2023-24, Pg No. 2, It No. 16)

Providing & Applying 10mm.th.cement plaster in single coat on

brick/concrete walls similar surfaces for plastering & finished

16 even & smooth with a floating coat of cement slurry mixed with

admixture of lime or neeru in required proportion etc. comp. in

C.M 1:3 (1 cement : 3sand)

Ground floor 232.00 189.79 S.M.

First floor 66.00 217.93 S.M.

(B) For ceilings and soffits of stairs

Ground floor 58.00 214.60 S.M.

First floor 0.00 242.74 S.M. -

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

(SOR SMC 2023-24, Pg No. 3, It No. 24)

Providing 20 mm thick double coat mala cement plaster on brick /

concrete work for plastering comprising of base coat 12 mm thick

cement plaster in cement mortar (1 Cement : 4 coarse sand) in

rough finishing and 8 mm thick top coat of cement mortar 1:2 (1

Cement : 2 Coarse sand) finished with trovel including scaffolding

curing etc. complete.

(SOR SMC 2023-24, Pg No. 3, It No. 27)

Providing throating or plaster drip and moulding it to R.C.C.chajja

etc. complete. For all Floor

(SOR SMC 2023-24, Pg No. 3, It No. 29)

Providing 20 mm. deep finished groove in plaster in line and level

etc. complete. For all floor (M.R.)

(SOR SMC 2023-24, Pg No. 3, It No. 30)

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24"

in flooring treads of steps and landing laid on a bed of

20 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) 49.00 1,040.35 S. M.

finishing with flush pointing in white cement. (Basic Rate-

(SOR SMC 2023-24, Pg No. 4, It No. 44)

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24"

in skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1 cement : 3 coarse sand) and jointed with white

cement slurry. (Basic Rate Rs.366.0/S.M.)

(SOR SMC 2023-24, Pg No. 4, It No. 45)

Providing & laying granite slab 18mm thick in Window-Door seal

Frame Etc laid on 10mm thick cement mortar 1:4 (1 Cement :

Coarse sand) with nessary adhesive material and finished with

flush pointing in white or colour cement, including rubbing &

polishing comp.. (Basic Rate:- Rs.1000.0/S.M.)

(SOR SMC 2023-24, Pg No. 4, It No. 41)

23 Labour Charges For Edge Finished For Granite 29.00 43.43 R.M.

(SOR SMC 2023-24, Pg No. 4, It No. 42)

Providing & laying granite slab 18mm thick in flooring, treads of

steps and landing laid on bed of 20mm thick cement mortar 1:6 (1

Cement : 6 coarse sand) or lime mortar 1:1.5 laid and finished

with flush pointing in white or colour cement including rubbing

and polishing complete. (Basic Rate:- Rs.1347.46/S.M.)

Providing & laying granite slab 18mm thick in skirting, risers of

steps, dedo and pillars laid on 10mm thick cement mortar 1:4 (1

25 Cement : 4 Coarse sand) and finished with flush pointing in white

or colour cement including rubbing & polishing comp.. (Basic

Rate:- Rs.1347.46/S.M.)

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

Providing & fixing 35mm.th. Flush Door Solid Double Core type

Both Face water proof Ply Vennered & 1.5 mm th.laminate shall

be pasted on both side with adhesives as specified by the

manufacturers. The laminate shall be as per approved shade &

texture, of make incl. Sal wood frames of finished size 12cm x

7cm.incl. S.S. Hinges with necessary screws & Anodized aluminum

fixtures & fastenings For all Floor

Same as Above But Without Frame 8.00 2520.00 S. M.

(SOR SMC 2023-24, Pg No. 5, It No. 51 & 52)

Providing and fixing window having extruded aluminium Powder

Coated section frame main outer size 63.50 x 38.10 x1.95 mm (of

Jindal section no.4605, @ Wt. 1.094Kg/mt) horizontal Two track

member size 61.85 mm x 31.75 mm x 1.20 mm (of jindal section

no:8687, @ Wt. 0.695 Kg/mt.) vertical member of size 61.85 mm

x 31.75 mm x 130 mm (of jindal section no:8758 @ wt. of

kg/mt) with sliding shutters of horizontal member size 40 mm x18

27 mm x 1.29 mm ( of jindal section no:8949, @ Wt. of .456 Kg/mt) 0.00 1705.67 S. M. -

vertical member of size 40 mm x 18 mm x 1.29 mm (of jindal

section no:8947, @ Wt. of 0.456 Kg/mt/section 8948, @ Wt. of

0.457 Kg/mt) with 5 mm thick tranparent bronze colour tineted

float glass with powder coated aluminium fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc.

complete for window.

(A) Same as above but Colour anodized 11.00 1705.67 S. M.

SMC SOR 23-24, ALUMINIUM WORK ITEM NO.-

Providing and fixing window having extruded aluminium Powder

Coated section frame main outer size 95 mm x 24 mm x 1.17 mm

(of jindal section no:2459 @ Wt. of 0.738 Kg/mt), horizontal

Three track member size 92 mm x 31.75 mm x 1.30 mm (of jindal

section no;8688, @ Wt. 1.07 Kg/mt), vertical member of size

mm x 31.75 mm x 1.50 mm (of jindal section no:8933, @ Wt.

Kg/mt) with sliding shutters of horizontal member size 40 mm x

28 18 mm x 1.29 mm (of jindal section no:8947 @ wt. of 0.456 0.00 1591.87 S. M. -

kg/mt), vertical member of size 40 mm x 18 mm x 1.29 mm (of

jindal section no:8949 @ wt. of 0.456 kg/mt) with 5 mm thick

transparent bronze colour tinted float glass with powder coated

aluminium fittings & fixtures and transparent silicon sealant glass

fixing to frame as per details etc

(A) Same as above but Colour anodized 13.00 1591.87 S. M.

SMC SOR 23-24, ALUMINIUM WORK ITEM NO.-

Distempering two coats with oil bound washable distemper of

approved brand& manufacture & of required shade on wall

surface to give an even shade over and & incl. a priming coat of

alkali resistance primer of approved brand after throughly

29 brushing the surface to give an even shade after throughly

brushingthe surface free from mortar droppings and other foreign

matter and also including preparing the surface even and smooth.

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

(A) For wall 298.00 72.23 S. M.

(B) For ceilings and soffits of stairs 58.00 80.35 S. M.

SMC SOR 23-24, COLOR WORKS, ITEM NO.-

Providing and applying two coats of weathershield max paint (3

coats may be required in case of darker colours) of ICI Dulux or

Apex Ultima of Asian paint including applying exterior acrylic

primer coat as per manufacturers specification and directions in

shade and colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface,

watering, curing etc. complete and as directed by the architects

and manufacturers.

Surface preparation:

Surface is thoroughly clean, dry and free from all loose dirt, chalk,

grease, funfi, algae and flaking paint. This can be achieved by

brushing with a wire / stiff coir brush, followed by water jetting if

required. Fill up all minor cracks and defects with white cement

and sand mixture in the ratio 1:3. For application on previously

painted wall, previous coatings of paint must be thoroughly

scraped off and clean the surface thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to dry

for 4-5 hours. application of putty is not recommended. Minimum 249.00 82.00 S. M.

4-6 hours duration is required between each coat of weather

shield max paint.

SMC SOR 23-24, COLOR WORK ITEM NO.-

(1) The whole work is to be executed through specialized

agency with a guarantee of 10 (Ten) years given on a

31 prescribed proforma duly stamped (2) The rate shall include

for work at all floors & conducting water proof test as

directed. (M.R.)

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

(B) Providing and laying integral cement based water

proofing treatment including preparation of surface as

required for treatment of roofs, balconies, terraces etc.

consisting of following operations. (a) Applying and grouting

a slurry coat of neat cement using 2.75 kg/sqm of cement

admixed with proprietary water proofing compound

comforming to IS:2645 over the R.C.C. slab including cleaning

the surface before treatment.(b) Laying cement concrete

using broken bricks/brick bats 25 mm to 100 mm size with

50% of cement mortar 1:5 (1 Cement : 5 Coarse sand)

admixed with proprietary water proofing compound

conforming to IS:2645 ,brick bats is finally covered by

jointless cement plaster 20mm th. in C.M. 1:4 added with

special water proofing compound confirming to IS:2645 &

top smooth finished with trowel with false chequered

marking of 300 mm.size.The treatment is carried along the

vertical surface of the parapet & other adjoining wall up to

height of about 300 mm in a shape of quarter round vata

Incl. curing Priming:

(c) The whole terrace so finished shall be flooded with water

for a minimum period of two weeks for curing and for final

test. All above operations to be down in order and as

directed and specified by the engineer-in-charge. With

average thickness of 120 mm and minimum thickness at

khurra as 65 mm. (Cement consumption 0.511 Bags / S.M.)

SMC SOR23-24, ITEM NO.-62

Providing and Fixing Hollow steel Sections Framed Work including

Cutting, Hoisting, Welding & Fixing in position Purlin, Main Chord

etc. as per Engineer in-charge.TATA / JINDAL / ASIAN Make for

Main entry gate etc.

SMC SOR 23-24, ITEM NO.-132 800.00 126.00 Kg.

Painting two coat (excluding priming coat) on new steel and

othermetal surface with synthetic enemal paint, brushing to give

an even shade including cleaning the surface of all dirt, dust and

other foreign matters.

SMC SOR 23-24, Colour works,ITEM NO.-8

Total amount for Ground floor

Total amount for Ground floor

WATER SUPPLY AND SANITARY ITEMS

Prov.& Fixing water closet squatting pan (Orissa type

W.C.pan) at all floor levels, size 500mm x 400 mm incl.

mm size "P'or "S" trap for water closet squatting pan joining

the trap with the pan & soil pipe in C.M. 1:1 (1cement :1 fine

sand) etc. Comp.(A) Vitreous china long pattern

Make- Cera S3010109, Parry ware C0117CS/C0117* , Jaquar

SMC SOR 23-24, SANITARY ITEM NO.-

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

Providing and fixing Wash Down Water closet European

type W.C. pan with integral P or S trap with normal closing

35 seat cover L bend including jointing the trap with soil pipe in

cement mortar 1:1 (1 cement : 1 find sand) (A) Viterous

china pattern - I

Make- Cera CONVENTIONAL B1510121 , Parry ware C0297*/

C0278, HindWare sleek 20011, Jaquar- CNS-WHT- 5.00 3282.00 No.

SMC SOR 23-24, SANITARY ITEM NO.-

Providing & fixing Wash Hung basin with single hole for pillar

tap , Size- 550 x 400 mm at all floor levels, with C.I. or M.S.

36 Brackets painted white incl. cutting holes & making good the

same etc. complete. For all Floor

Make- Cera Cat. No. S2040121, Parry wareC0434* (CTH),

Jaquar SLS- WHT -6801 ,HindWare10004

SMC SOR 23-24, SANITARY ITEM NO.-

Providing & fixing white vitreous china urinal of size

x325mm as per IS-2556 (Part-2 ) with C.I. hangers and

15mm dia. C.P. spreader,32mm dia CP bottle trap and pipe

to wall with C.P. flange complete including cutting and

making good the walls and floors wherever required.

Make- CeraCat. No. S4020103, Parry ware C0501*, Jaquar URS-WHT13261H

2476.00 BACK SMALL

SMC SOR 23-24, SANITARY ITEM NO.-

Providing and fixing 600 mm. x 450mm. mirror of superior

glass at all floor levels, mounted on 6 mm.thick A.C.sheet or

38 plywood sheet & fixed to wooden plugs with C. P. brass 2.00 833.73 No.

screws and washers etc. complete. For all floor.

SMC SOR 23-24,WATER SUPPLY AND SANITARY ITEMS,

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

110x110 mm diameter with jali of the following nominal

39 diameter of self cleaning design with C.I. scread down or 1.00 558.36 No.

hinged grating including the cost of cutting and making good

SMC SOR 23-24,WATER SUPPLY AND SANITARY ITEMS,

Providing and fixing U-P.V.C. pipe (SWR) confirming to I.S.

no.13592 (Type "B") of Prince / Supreme / Jain / Astral / Tulsi

/Finolex make for soil and waste discharge system at all floor

levels including all fixures like bends, tees, shoe etc. jointed

with resin of approved brand and manufacture etc.

complete.(M.R.)

SMC SOR 23-24, WATER SUPPLY AND SANITARY ITEMS,

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

Prov. & Fixing S.W. Gully trap with C.I.grating brick

masonary (C.M 1:5) chamber & water tight C.I. cover with

frame of 300mmx300mm size (inside) with weight to be not

less than 4.53kg, includ. plastering smooth inside & outside

15mm. th' in C.M.1:3 etc. comp. (i) Square mouth traps

(A) 100mm x 100mm Size -P type 1.00 1292.19 No.

SMC SOR 23-24, WATER SUPPLY & SANITARY ITEM NO.-

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside

dimension, 455 x 610 mm & 450 mm deep sewer trap

chamber with 23 cm th' B.B. masonary walls in C.M 1:5 with

cement plaster 15 mm th' in C.M. 1:3 inside & outside to

42 exposed faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 0.00 3155.63 No. -

Sand : 4 Grade stone aggregate 20mm size), Foundation

concrete 1:5:10 & fixing C.I. cover with frame to be not less

than 38 kg. On top etc. comp. for single pipe.

(A).Same as above but Precast RCC heavy duty Cover instead

Extra for every additional depth 0.1 mt beyoung 0.45 mt. 12.00 222.71 Each

SMC SOR 23-24, WATER SUPPLY & SANITARY ITEM NO.-

Providing & construction simple chamber of 23 cm. th' B.B.

Masonary in C.M 1:5 with cement plaster 15 mm th' in C.M.

1:3 inside & outside to exposed faces, R.C.C. top slab with

1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone aggregate

20mm size), Foundation concrete 1:5:10 & fixing C.I. cover

with frame to be not less than 38 kg. on top etc. comp.

Inside dimension 455 x 610 mm & 450 mm deep for single

(A).Same as above but Precast RCC heavy duty Cover instead

Extra for every additional depth 0.1 mt beyoung 0.45 mt. 12.00 242.39 Each

SMC SOR 23-24, WATER SUPPLY & SANITARY ITEM NO.-

Providing, Lowering and laying joining R.C.C. NP2 CLASS pipe

44 in C.M.1:1 of following nominal internal diameters including

testing of pipes and joints etc. complete.

SMC SOR 23-24, WATER SUPPLY & SANITARY ITEM NO.-

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

Providing & Fixing P.V.C. pipes (SCH-40) of Prince/

Supreme/ Jain/ Astral/ Tulsi/Finolex make for water supply

line at all floor levels incl. fixtures like bends, tees, shoe etc

joined with resin of approved brand & manufacture etc.

45 comp. Pipe shall be fixed on the wall the help of clamp at

every two meter C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including

cost of all materials.(M.R.)

SMC SOR 23-24, WATER SUPPLY & SANITARY ITEM NO.-

Providing & Fixing 15 mm Dia bib tap with wall Flange at all

46 floor levels, polished bright etc.comp.

Make- Cera F2013151 BIB COCK, Parry wareG3104A1,

HindWare F280002 BIB COCK, Jaquar FLR-5047 N BIB COCK 5.00 1323.00 No.

SMC SOR 23-24, SANITARY ITEM NO.-

Providing and fixing gun metal check or non return full way

wheel valve at all floor levels. etc. complete.

SMC SOR 23-24, WATER SUPPLY & SANITARY ITEM NO.-

Providing flush cock consisting lever, cartridge sleeve &

flange & concealed part

Make- Cera EXPOSED PART F2013751 &Concealed part

F4060101 , Parry ware T9824A1&T9823A1, Jaquar FLR

KN , CONCEALED BODY ALD-081,HindWare F280052 &

CONCEALED STOP COCK F850105

SMC SOR 23-24, SANITARY ITEM NO.-

Providing and fixing abonite ball cock of approved qualities

directed etc. complete.

SMC SOR 23-24, WATER SUPPLY & SANITARY ITEM NO.-

Providing & fixing C.P. brass pillar cock with copper

connection, C.P. brass screws complete

Make- Cera F2013101, Parry ware Cat. No.: G3102A1,

HindWare Cat. No.: F650003, Jaquar FLR-5011N

SMC SOR 23-24, SANITARY ITEM NO.-

Providing and fixing C.I. machinehole cover 0.60 mt. x

51 mt. size having weight not less than 35 kg. etc. complete. 2.00 958.17 No.

SMC SOR 23-24, WATER SUPPLY & SANITARY ITEM NO.-

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

Providing & fixing U-PVC pipes Confirming to IS no.

(Type "A") of Prince/Supreme/Jain/Astral/ Tulsi/Finolex

52 make for rain water at all floor levels incl. fixtures like bends,

tees, shoe etc joined with resin of approved brand &

manufacture etc. comp. (M.R.)

SMC SOR 23-24, WATER SUPPLY & SANITARY ITEM NO.-

Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work

incl. boxing,centering, vibrating, curing & mixed with

approved water proofing cement compound or "CEMWET"

or "PIDICRETE LW"integral water proofing admixture as

water proofing agent to be mixed with 50 kg. cement bag

shall be as recommended by the manufacture of the water

proofing material, concrete work for top, bottom slab & side

pardi for Under ground Tank & Item incl. Necessary

excavation & refilling the available earth, 15 cm th' C.C 1:4:8

53 for bedding concrete, Half B.M. in C.M. 1:4 outside wall,

inside R.C.C. pardi as per design, 10mm.th. water proofing

cement plaster in C.M. 1:3 with smooth finishing,watering

etc.Comp.to all inner face & bottom of tank curing etc.

comp. incl. Locking arrangement,outlet, inlet, overflow &

wash out pipe arrangement as necessary & C.I.Cover 0.60 x

.045 weight not less then 35kg. etc. com. as per structural

drawing excluding Steel & as directed by Engineer-in-charge.

Underground tank 5000.00 5.46 Litre

SMC SOR 23-24, ITEM NO.-

Providing & fixing IS Mark TMT Bar FE 500D reinforcement

54 for R.C.C. work incl. bending, binding & placing in position 445.00 76.21 Kg.

etc. comp. Upto G.L./P.L.

SMC SOR 23-24, ITEM NO.-

Providing erecting and fixing double coated Syntex / Super /

Reno PVC (ISI) mark water tank of required capacity each

with all necessary fittings & connection etc. complete on

SMC SOR 23-24, ITEM NO.-92

Total amount for water supply and sanitary items

Total amount for water supply and sanitary items

TOTAL FOR PART - G - OFFICE,SECURITY CABIN & MAIN

BENCHES & DUSTBINS

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

Providing, supplying & placing precast RCC Woodeny

benches as per given specifications. (Seating plank

dimensions : Seating Length of the Bench : 1380 mm, Seating

width of the Bench : 450 mm, Seating height of the Bench :

450 mm, Seating plank thickness : 60 mm,Total height of the

Bench : 900 mm.)

M-30 grade of Concrete using vibration compaction process.

Benches consists of 2 Nos. L-shape base support in wooden

texture and 1 Nos.flate back and 1 Nos. bottom plank leg

thickness :90 mm, Leg hight : 830mm, Leg width : 600 mm,

backside plank width : 350 mm, backside plank length :

mm, backside plank thickness : 60 mm.

Bench top and back planks are treated with special

anticorrosive, water proof coating, prevent sun, rain, light

and fungal attack, as to make surfaces glossy and water

The back rest should show as details given by SMC in

embossed at casting time.

SMC SOR 23-24, ITEM NO.-

Providing and fixing Dustbin with M.S. stand at the location

2 including concrete foundation block neede to fix the stand 20.00 4,000.00 No.

as directed by the EIC.

Providing & Fixing heavy duty p.v.c Dustbin with auto hinges

3 and cover as Directed By Engineer in charge.(0.3 cu.mt) 20.00 600.00 No.

Providing and Fixing Hollow steel Sections Framed Work

including Cutting, Hoisting, Welding & Fixing in position

Purlin, Main Chord etc. as per Engineer-in-charge.TATA /

JINDAL / ASIAN Make (M.R.)

SMC SOR 23-24, ITEM NO.-

TOTAL FOR PART - H - BENCHES,DUSTBINS & SCLPTURES

Total Amount of civil works

Total Amount of civil works

PROVIDING, SUPPLYING AND FIXING OF CHILDREN

PLAYING EQUIPMENTS, OUTDOOR PHYSICAL FITNESS

EQUIPMENTS (INCLUDING ONE YEAR FREE MAINTENANCE)

(A) CHILDREN PLAYING EQUIPMENTS, OUTDOOR PHYSICAL

FITNESS EQUIPMENTS

1 Multi Activity Play System -4 1.00 585900.00 No.

2 Double lane Slide 2.00 92288.14 No.

3 Four seater arc swing 1.00 48127.12 No.

4 Double seater arc swing 2.00 30508.47 No.

5 Circular Swing 1.00 23664.07 No.

6 Animal M.G.R. 1.00 28220.34 No.

7 Platform M.G.R. 1.00 38974.58 No.

8 Dolphin See Saw 2.00 18305.08 No.

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

9 Multi Seater See-Saw 2.00 16855.93 No.

10 Combination Set 3 in 1 1.00 28296.61 No.

11 Mini Slide 1.00 20502.56 No.

12 Mini Wave Slide 1.00 20855.64 No.

13 Toddler Swing 1.00 24030.25 No.

14 Spring Rider Duck 2.00 10677.97 No.

15 Spring Rider Racer 2.00 15254.24 No.

16 S Loop Climber 1.00 25932.20 No.

17 Sunset Scrambler 1.00 26008.47 No.

TOTAL FOR (A) CHILDREN PLAYING EQUIPMENTS

(B) OUTDOOR PHYSICAL FITNESS EQUIPMENTS

AIR WALKER / SWING WALKER / SKY WALKER

LENGTH 800 MM X WIDTH 500 MM X HEIGHT 1200 MM

40 NB GALVANIZED PIPE SUSPENDED OVER 80 NB

GALVANIZED UP TO MINIMUM 40 MICRON TK.,UNIFORMLY

POEDER COATED UP TO MINIMUM 60 MICRON TK,PIPE

MAIN FRAME &FOOT REST CONSISTING OF HDPE SHEET

FIXED OVER ZINC PLATE FOR CORROSION RESISTANCE .THE

HANDLE CONSIST OF 25 NB GALVANIZED PIPE FIXED OVER

NB MAIN FRAME FOR GRIP CONFORMING TO EN1176:2008.

ALL OPEN ENDS OF PIPE BEEN CLOSED BY GI/HDPE CAPS FOR

USER SAFETY AGAINST ENTRAPMENT

AERO RIDER/ ROWING RIDER

LENGTH 800 MM X WIDTH 500 MM X HEIGHT 1200 MM

HDPE/LLDPE ROTO MOLDED SEAT HINGED OVER FRAME

MADE FROM 100NB GALVANIZED PIPE WITH POWDER

COATING OF MINIMUM 60 MICRON TK. HANDLE SUPPORT

PIPELINKED TO SEAT VIA 25 NB GALVANIZED PIPE .THE

HANDLE SUPPORT PIPE IS PIVOTED OVER 100 NB SUPPORT

PIPE WITH ZINC PLATED SQURE TUBE FOR CORROSION

RESISTANCE .THE HANDLE PIPE CONSISTS OF GRIP

CONFORMING TO EN1176 :2008 .THE HANDLE PIPE

EXTENDED TO CONNECT FOOT GRIP VIA 40NB GALVANIZED

PIPE. THE SEAT REST OVER THE 50 NB PIPE FIXED OVER THE

HIP TWISTER/ WAIST TWISTER

LENGTH 600 MM X WIDTH 500 MM X HEIGHT 1200 MM

100 NB GALVANIZED POWDER COATED UPTO MINIMUM

MICRON TK,PIPE MAIN FRAME WITH HANDLE PIPE FIXED AT

THE TOP. HANDLE PIPE CONSIST OF RUBBER GRIP

CONFORMING TO EN1176 :2008 .THE ROTATING DISC MADE

FROM HDPE/LLDPE PLASTIC IS SUPPORTED OVER 25 NB PIPE

BOLTED TO MAIN FRAME PIPE .ALL GI PIPES ARE

GALVANIZED UP TO MINIMUM 40 MICRON TK. FOR

CORROSION RESISTANCE .ALL OPEN ENDS OF PIPE BEEN

CLOSED BY GI/HDPE CAPS FOR USER SAFETY AGAINST

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

ELLIPTICAL CROSS TRAINER /WORKING TRAINER /OVATE

LENGTH 800 MM X WIDTH 500 MM X HEIGHT 1350 MM

PAIRED SQUARE TUBE WITH FOOT REST ON EACH LINKED TO

80NB GALVANIZED MAIN FRAME PIPE WITH POWDER

COATED UPTO MINIMUM 60 MICRON TK,THE HANDLE PIPE

CONSIST OF 25 NB GALVANIZED RUBBER GRIP ON TOP END

HINGED OVER 80 NB MAIN FRAM THE HANDLE PIPE

EXTENDED TO THE SQUARE TUBE ON BOTH SIDE WITH 40 NB

GALVANIZED UP TO MINIMUM 40 MICRON TK. FOR

CORROSION RESISTANCE .ALL OPEN ENDS OF PIPE BEEN

CLOSED BY GI/HDPE CAPS FOR USER SAFETY AGAINST

SHOULDER SPINNER / BIG ARM WHEEL / SHOULDER TWIRL

RING DIA. MIN. 500 MM X WIDTH 350 MM X HEIGHT

25 NB GALVANIZED PIPE BEND TO FROM RING & SPOKES

CONSIST OF 20 NB THAT CONNECTS PIPE RING & 40 NB

CONNECTOR PIPE FIXED TO 100 NB MAIN SUPPORT

GALVANIZED PIPE WITH POWDER COAT THICKNESS OF

MINIMUM 60 MICRONS. ALL GI PIPES ARE GALVANIZED UP

TO MINIMUM 40 MICRON TK. FOR CORROSION RESISTANCE

.ALL OPEN ENDS OF PIPE BEEN CLOSED BY GI/HDPE CAPS

FOR USER SAFETY AGAINST ENTRAPMENT.HANDLE FOR

ROTATING THE RING FIXED OVER THE PIPE RING

FORE ARM SPINNER /SMALL ARM WHEEL

RING DIA. MIN. 300 MM X WIDTH 500 MM X HEIGHT

25 NB GALVANIZED PIPE BEND TO FROM PAIRED RING &

SPOKES CONSIST OF 20 NB THAT CONNECTS PIPE RING &

NB CONNECTOR BEND PIPE FIXED TO 100 NB MAIN SUPPORT

GALVANIZED PIPE WITH POWDER COAT THICKNESS OF

MINIMUM 60 MICRONS. ALL GI PIPES ARE GALVANIZED UP

TO MINIMUM 40 MICRON TK. FOR CORROSION RESISTANCE

.ALL OPEN ENDS OF PIPE BEEN CLOSED BY GI/HDPE CAPS

FOR USER SAFETY AGAINST ENTRAPMENT.HANDLE FOR

ROTATING THE RING FIXED OVER THE PIPE RING

LENGTH 800 MM X WIDTH 700 MM X HEIGHT 1100 MM

HDPE/LLDPE SEAT WITH BACKREST FIXED OVER 50NB

GALVANIZED PIPE FIXED OVER 100NB MAIN SUPPORTING

PIPE .THE PAIRED 25 NB PIPE HANDLE WITH RUBBER GRIP AT

THE END IS FIXED OVER 40 NB PIPE FRAME .THE PAIRED

ROLLER WITH RUBBER GRIP HINGED AND SUPPORTED OVER

100 NB MAIN FRAME WITH 40NB GALVANIZED PIPE ALL

OPEN ENDS OF PIPE BEEN CLOSED BY GI/HDPE CAPS FOR

USER SAFETY AGAINEST ENTRAPMENT.ALL GI PIPES ARE

GALVANIZED UP TO MINIMUM 60 MICRON TK. FOR

CORROSION RESISTANCE

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

ABDOMEN BOARD / SIT UP BOARD

LENGTH 1500 MM X WIDTH 700 MM X HEIGHT 600 MM

80 NB GALVANIZED POWDER COATED PIPE MAIN FRAME

WITH LEG SUPPORT HAVING POWDER COAT THICKNESS

MINIMUM 60 MICRON .THE FRP/HDPE REST IS FIXED OVER

40 NB TOP SEAT REST FRAE.ALL GI PIPES ARE GALVANIZED

UP TO MINIMUM 60 MICRON TK. FOR CORROSION

RESISTANCE ALL OPEN ENDS OF PIPE BEEN CLOSED BY

GI/HDPE CAPS FOR USER SAFETY AGAINEST ENTRAPMENT

LEG LIFT STATION/ LEG LIFT POST

LENGTH 700 MM X WIDTH 400 MM X HEIGHT 1600 MM

MINIMUM 6 NOS. 25 NB SPACER PIPES CONNECTED TO

PAIRED 80 NB GALVANIZED PIPE ARRANGED PARALLEL AT

EQUIDISTANCE MINIMUM 100 MM. THE PAIRED HANDLE

PIPE CONSISTING OF 25 NB GALVANIZED PIPE FIXED AT THE

TOP & BOTTOM OF 80 NB SUPPORT PIPE .ALL GI PIPES ARE

GALVANIZED UP TO MINIMUM 40 MICRON TK. FOR

CORROSION RESISTANCE ALL OPEN ENDS OF PIPE BEEN

CLOSED BY GI/HDPE CAPS FOR USER SAFETY AGAINEST

ENTRAPMENT HANDLE FOR ROTATING THE RING FIXED OVER

LENGTH 800 MM X WIDTH 600 MM X HEIGHT 1800 MM

100 NB GALVANIZED MAIN VERTICAL SUPPORT PIPE FIXED

OVER SQURE TUBE BOTTOM FRAME HDPE/LLDPE PLASTIC

SEAT FIXED OVER SQURE TUBE WITH ZINC PLATING FOR

CORROSION RESISTANCE WHICH IS HINGED OVER VERTICAL

SUPPORT PIPE THROUGH 40 NB GALVANIZED PIPE LINKS. ALL

PIPES ARE POEDER COATED WITH THICKNESS OF MINIMUM

60 MICRON .THE HANDLE PIPE CONSIST OF 40 NB

GALVANIZED PIPE WITH RUBBER HANDLE GRIP AT ITS BOTH

ENDS & LINKED TO THE SEAT WITH 40 NB PIPE HINGED TO

MAIN VERTICAL SUPPORT PIPE . ALL GI PIPES ARE

8-12 YRS. 1.3 M X 0.5 M SAFE PLAY AREA 2.3 M X 1.5 M

THE WALKING BARREL CONSIST OF DRUM ,WHICH IS MADE

UP MOULDED LINER LOW DENSITY POLYETHYLENE (LLDPE)

IN ONE PIECE, WHICH IS SUPPORTED WITH HANDELS OF

NB GI PIPES . THE BARREL REVOLVS IN BEARINGS WITH

SPECIAL HOUSING TO PREVENT OUTSIDE DUST PARTICLES .

THE VERTICAL SUPPORT IS MADE UP OF 80 NB GI PIPE ,WITH

HANDLES PROVIDED FOR HOLDING WHILE PLAYING

TOTAL FOR (B) OUTDOOR PHYSICAL FITNESS EQUIPMENTS

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

TOTAL FOR PART J -CHILDREN PLAYING EQUIPMENTS +

OUTDOOR PHYSICAL FITNESS EQUIPMENTS (A+B)

PART-1 INTERNAL ELECTRIFICATION WORK

Point wiring for Light / Bell with2-1.5 sq.mm& earth wire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length

, in below type of pipe erectedwith 6A Modular type switch /

bell push & accessories and earth continuityof following

type, erected on PVC / Metallic/Wooden box, single

mounting base frame covered with

1 textured/metallic/whitefrontplatemoduleserectedon 12.00 449.45 PT

/in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector

asdirected.(f)withmediumclassRigidPVCpipeand

accessorieserectedconcealedinwall/ceiling

complete Cat.III

Point wiring for Tissino / Modular secondary light

point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires, in below

type of pipe to be erected complete with earth

continuity and necessary connection with primary

light with accessories erected on Metal / PVC /

2 wooden box covered with 3 mm thick 6.00 151.50 PT

PC(Polycarbonate) / Acrylic sheet for open /

concealed wiring. with necessary Lamp holder /

ceiling rose / H.D.Connector as directed. (f) with

medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete. cat lll

Point wiring for FAN with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following

3 type erected on PVC / Metallic/Wooden box, single 2.00 629.23 PT

mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D.Connector as

directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete Cat.

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed

on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity

of following size (A) With medium class Rigid PVC pipe and

accessories (a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed

on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity

of following size (A) With medium class Rigid PVC pipe and

accessories (b) 2 wire 2.5 sq. mm

Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box

6 covered with appropriate front plate modules erected on / 2.00 473.69 PT

in wall / ceiling as per pipe erected with following type of

accessories.[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm

Cu. Wire from nearby switchboard/mcb db board.(f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box

7 covered with appropriate front plate modules erected on / 7.00 697.91 PT

in wall / ceiling as per pipe erected with following type of

accessories.[II] For 16A Plug and 16 amp switch with 2-2.5

sq.mm Cu. Wire from mcb db board.(f) with medium class

Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

Point wiring for on board Looped Plug with 6A Modular type

switch & 5 pin socket erected on PVC / Metallic/Wooden

box, single mounting base frame covered with textured

/metallic/white front plate modules erected on / in wall /

ceiling with following type accessories Cat. III

9 Bakelite adopter for Holder to be erected. 20.00 9.09 EA

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed.(a)20 mm

Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed.(b) 25 mm

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%, CCT 3000 K to 6500K,

12 Luminaire efficacy> 85 lumens/watt ,LED LED driver 6.00 373.70 EA

efficiency > 85 % ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (A)

Tube Light with integral driver (iv) 22-24 Watts, Surge -

2KV,IP-20, conventional 4 feet Cat-III

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance

with diffuser housed in aluminium casted body with

company mark/name 160V to 270V,Power Factor more than

13 CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt 30.00 813.05 EA

,LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (F) Spot Light

Lumens, Surge-2KV(i) 3 to 7 Watts Cat-lll

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

Supplying and erecting led lamps with following wattage

capacity of 220 to 240 voltage, minimum 15000 burning

hours life, 500 V in built-surge protection,Polycarbonate

diffuser, mounting suitable for E14 / E27 / B22 lamp holders,

pf >= 0.5 (A) LED Lamps integral type, with PC diffuser

suitable LAMP holder (ii) 5 to 8 watts

Providing & erecting Approved make Power Saving 50 Watt

Ceiling Fan with double ball bearing ISI mark with Condenser

230 volt A.C. 50 Hz 1200 mm sweep complete having

3blades with aluminium blades with , canopy & 30 cm. down

rod erected with earthing.(Make shall be approved by

Engineer in charge))

Supplying & erecting fan hook box of 10 mm M.S. round bar

bounded to the RCC bars up to 50mm length each side and

16 pierced through a 16 Gauge M.S. box / Heavy Duty PVC box 3.00 108.07 EA

complete erected concealed in Ceiling with necessary

Providing 2.5mm.thick laminated acrylic sheet to cover the

fan hook or Fan box.

Supplying & erecting approved make low noise decorative

exhaust fan having square frame ABS body with inbuilt

lowers & square frame.250mm with 1350 RPM Cat.II

Providing & erecting water cooler having storage capacity

150 Ltr. & cooling capacity 150 Ltr.per hour @ an ambient

temp of 45˚ C. The outlet temp. of the water should drop by

15˚C within a hour, The water cooler should be comprising of

19 hermetically sealed compressor, fan motor, condensing unit, 1 46648.87 EA

water tank surrounded by evaporating, coil, thermostats,

relay etc.complete with necessary inlet & outlet connection.

The body of water cooler will be made from Stainless Steel.

Supplying & erecting 5 stage single reverse osmosis water

purification system with M.S. powder coated frame, prefilter

housing with 'O' ring presediment filter GAC filter, carbon

filter suitable buster DC pump capacity 80 psi, mention with

20 40 psi inline type post carbon filter auto low & high pressure 1 24394.53 EA

switches with following size of storage tank & LPH capacity &

erected as directed [C] 50 Ltr / Hr with 150 psi 2 nos

Sub total Part-01

SWITCHGEAR & DISTRIBUTION BOARD

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

providing and erecting Miniature circuit breaker single pole

0.5A to 2A system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with ISI

Providing and erecting Miniature circuit breaker single pole

6A to 25A suitable to operate on 240 V A.C. system and

22 having breaking capacity 10 KA to be erected in existing box. 36.00 112.11 EA

confirming to IS 8828/1996 with ISI Mark Cat.III

Providing & erecting 415 V MCB Four Pole for Motor &

Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following capacity

(c)63 Amp Cat.III

Providing & erecting 415V MCB Four Pole Switch for Lighting

Load (B curve) having 10KA breaking capacity & confirms to

IS :8828 in existing box having following capacity (b)40 Amp.

Providing & erecting 415 V MCB three Pole for Motor &

Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following capacity

(a) 6 to 32 Amp. Cat.III

Providing & erecting 415 V MCB three Pole for Motor &

Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following capacity

(b) 40 Amp. Cat.III

Supplying & erecting power contactor ,AC3 duty for time

27 switch complete erected as per direction Cat III (D) 4 pole 1.00 2782.55 EA

providing and erecting Approved make RCCBs conforming to

IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on

single phase 240 V,50Hz. having characteristic of quick

action & tripping with all advance feature & do not

incorporate any electronic component. for following Max.

rating erected as directed (ii) 40Amps. DP Cat. III

Providing and erecting Approved make RCCBs conforming to

IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on

phase and neutral 415V,50Hz. having characteristic of quick

action & tripping with all advance feature & do not

incorporate any electronic component for following Max.

rating erected as directed.(iii) 63 Amps. FP Cat. III

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

30 appropriate nos. of MCBs.(The DBs should be used of same 6.00 3412.79 EA

company of MCB to be used) suitable for (B) three phase

incoming and single phase horizontal type outgoing Per

phase isolation type (PPI) (b) sheet steel double door (iii)8

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

31 appropriate nos. of MCBs.(The DBs should be used of same 1.00 3874.36 EA

company of MCB to be used) suitable for (B) three phase

incoming and single phase horizontal type outgoing Per

phase isolation type (PPI)(b) sheet steel double door (iv)12

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (A) single phase

incoming and horizontal single phase outgoing(a) single

door (IP-30)(iii)8 way

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (A) single phase

incoming and horizontal single phase outgoing(a) single

door (IP-30)(iv)12 way

Providing and erecting Sheet Steel powder coated Vertical

MCB distribution board (VTPN) - flush / surface mounted

double door (IP54) fitted with copper insulated busbar,

isolated neutral bar, earth bar and DIN rail, Conforms to IS

MCCB + RCCB as incomer and three phase outgoing as per

following .(The DBs should be used of same company of MCB

to be used) (B)6 way outgoing

Providing and erecting Two way Centre off Four pole MCB

35 Change Over Switch (IS 13947-3 / IEC 60947-3) in existing 1.00 852.44 EA

box (a) for 25 Amp Cat.III.

Providing and erecting Two way Centre off Four pole MCB

36 Change Over Switch (IS 13947-3 / IEC 60947-3) in existing 1.00 1344.31 EA

box (b) for 40 Amp Cat.III.

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

Providing and erecting metallic vitrified danger notice board

as per language suggested by engineer incharge for

MEDIUM VOLTAGE installation to be erected as per IS-2551.

Providing & erecting High Voltage Danger Notice Board

38 sticker as per language suggested by engineer incharge of 1.00 35.35 EA

standard size-as per IS

Erection & connection charges for 32A/ 63 A / 100 A HRC

39 TPN as following (b)Erection on New angle iron frame duly 1.00 138.37 EA

painted with red oxide

Sub total Part-02

CABLES AND WIRES

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling with

40 2.5 sq. mm copper conductor FRLS PVC insulated stranded 150.00 107.06 Mtr

wire of green colour for earth continuity of following size(A)

with medium class Rigid PVC pipe and accessories.(a)

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling with

41 2.5 sq. mm copper conductor FRLS PVC insulated stranded 50.00 140.39 Mtr

wire of green colour for earth continuity of following size(A)

with medium class Rigid PVC pipe and accessories.(b)

Supplying & erecting Flexible PVC insulated multistrand

multicore 1.1 KV grade ISI marked Copper Wires of following

Size to be erected as directed.(h) 2.50 Sq.mm 3 core round

PVC sheathed ( street lights )

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be

43 laid on wall with necessary clamps or in existing trench / 2007.50 151.50 Mtr.

pipe of following size of cables(A) 4 core 16 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable Aluminium conductor for 1.1 KV. to be laid on wall

44 with necessary clamps or in existing trench / pipe of 60.00 90.90 Mtr.

following size of cables. (B) 2 core 6 Sq. mm (1 ph DB)

Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.(D) 2 to 4 core 16 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

46 pressure tool & connected to switchgear terminals with 464.00 15.15 Ea

brass/cadmium plated nut bolts in an approved manner. (C)

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

47 pressure tool & connected to switchgear terminals with 8.00 6.06 Ea

brass/cadmium plated nut bolts in an approved manner. (A)

Making trench in soft soil of suitable width of 90 cm deep for

laying cable or locating the fault all over the run and back

filling the same and making the surface as normal ground.

Providing & laying approved make Double walled corrugated

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at

required depth in existing trench for laying of cable. below

ground / road surface for enclosing cable (A)50 mm outer

Providing and erecting ISI marked PVC insulated PVC

50 Sheathed Flat flexible Submersible copper cable approved 150.00 146.45 Mtr.

make of following Size. (C) 3 Core x 4 Sq. mm

Providing & laying. R.C.C. Hume pipe for cable to be laid

cm. below ground across the road crossing or on floor with

necessary material in an approved manner and making the

ground as per original.(E)150 mm dia

Sub total Part-03

Supplying & erecting earth pit of minimum bore dia.150mm

size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 50mm having

80-200 Micron galvanising, Inner pipe dia of 25 mm having

200- 250 Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy

duty cover.(approved make OEM has to submit test

52 certificate) & having back filling compound of (B) Inner 2.00 5760.03 Ea.

chemical (CCM Compound)- Resistivity:- 0.2 • / meter testing

as per IEC 62561-2017, Voltage drop:- < 1 volt at no load &

dry form, Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to retainmoisture for

long time Necessary test report must be submitted.(c) For

Electrical Installation covering Transformer Neutrals,

Lightning arrester Earthing, A.C.Plant & Sensitive Computer

System(like Automation, SCADA) i.e independent (b)For

Electrical installation up to 11 KV in normal soil. Length of

Pipe : 2.00 mtrs Back filling Compound :1 no. Bag of 25 Kg

Providing and erecting Pipe type earthing having

cms.long and 2.5 cms. dia. galvanised iron pipe with coupling

53 and buch buried in specially prepared earth pit complete 57.00 368.65 Ea.

with necessary 8 SWG earth wire. - to be used for each

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

For using salt and charcoal / coke as required for pipe type

Providing one bag of 25 Kg. Additional Back Filling

Compound (BFC) suitable for safe earthing device.

Providing and erecting required size Copper strip for

56 earthing of H.T. OCB / ACB/ Transformer, LT panel board, 10.00 794.87 Ea.

Motors etc. using copper clamp.

Providing and erecting required size HOT deep Galvanised

iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT

panel board, Motors etc. using proper clamp.

Providing , erecting , fabricating the M.S. structure as per

requirement on site incorporating proper size of M.S.

angles,square,round, flats, bars, channels, sections complete

with cutting, welding, grinding & finishing duly painted with

one coat of red oxide with erection on site as per direction

of engineer in charge with necessary grouting, cementing,

plastering & finishing complete.

Sub total Part-04

Providing pair of rubber hand gloves suitable for working on

11 KV/22 KV supply.

Providing printed instruction chart both in English and

60 Gujarati and duly framed with front glasses, for treatment of 2.00 130.29 Ea

person suffering from Electric shock

providng and erecting Approved make. energy meter

phase 4 wire unbalanced load 500 V.50A / 100A complete

erected as directed with necessary earth wire. Cat. III

providng and erecting Suitable set of CTS for 100A Energy

Supplying rubber matting of following thickness as per

IS:15652/IEC 61111 (b)4mm

Supplying rubber matting of following thickness as per

IS:15652/IEC 61111 (c)12mm

Sub total Part-05

Providing & erecting open well horizontal mono block pump

set with cast iron body, complete for three phase

submersible motor having [C] For 3 HP 3 phase open well

horizontal mono block pump set suitable for 85 LPM to

LPM @ 11 mtr to 33 mtr head suitable for 50/65 mm dia

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

Providing & erecting open well type horizontal mono block

pump set with stainless steel body having following

specification (C) 1 H.P. single phase open well motor pump

set suitable for 185 LPM discharge @ 25 mtr. head,

suitable for 32 mm dia. Delivery pipe with control panel.

Supplying and erecting Direct on line starter with 30 Amp.

(resistive @ 230v) power relay and with 2 to 5/ 4 to 10 / 8 to

20 amp. Range C.T. Operated electronic overload relay in

engineering grade plastic enclosure for 3 ph 415v 50 HZ A.C.

motor up to 7.5 HP with high voltage protection (above

v) and under voltage protection (below 330 v) current

67 sensing single phasing protection. Reverse phasing 2.00 2168.47 Ea.

protection, inverse current characteristic overload

protection with indication for On, OL, HV,LV SPP in a single

unit with feather touch start / stop push button, high

temperature with standing Bakelite terminals complete

erected on P.W. Block with necessary connection. [Cat.II]

Supplying & erecting approved make Automatic liquid level

controller 6A.as per instruction of Engineer in charge on site

complete with wiring connection with existing wires , with

68 copper conductor from pump to upper and lower tank.(Size 1.00 2355.32 Ea

Not less than 1.5 Sq MM) from pump to upper and lower

tank with ISI marked Rigid PVC Pipe.

Sub total Part-06

EXTERNAL ELECTRIFICATION

Providing and erecting Street Light pole bracket comprising

main B Class MS pipe of 4.2 cm/require outside dia.

complete with suitable B Class M.S. sleeve tubing of approx.

45cms.length and suitable for 76.5 mm /80mm / required

size of pole top having sufficient fasteners for fixing the

69 brackets and having spread of 1.5.mtr. length with 110 35.00 626.20 EA

deg.with vertical plane & suitable welded stays, reducer and

with check nuts complete painted with one coat of Red

oxide / PU base primer and two coats of Aluminium / PU

paint. paint with following nos of arms [A] Single Arm

Bracket 1.5 Mtr

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

Providing and erecting Street Light pole bracket comprising

main B Class MS pipe of 4.2 cm/require outside dia.

complete with suitable B Class M.S. sleeve tubing of approx.

45cms.length and suitable for 76.5 mm /80mm / required

size of pole top having sufficient fasteners for fixing the

70 brackets and having spread of 1.5.mtr. length with 110 2.00 916.07 EA

deg.with vertical plane & suitable welded stays, reducer and

with check nuts complete painted with one coat of Red

oxide / PU base primer and two coats of Aluminium / PU

paint. paint with following nos of arms [B] Double Arm

Bracket 1.5 Mtr

Supplying & erecting approved make SMC press moulded

composite FRP . loop-in, loopout approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E),DIN

rail for mounting mob & hinged doors as per requirement

71 having locking arrangements with mounting clamp with 58.00 898.90 EA

nuts, bolts & washers suitable for erection on pole with

cable clamps& earth bolt of following size of box.(a) 300mm

x 200mm x 100mm [deep]

Providing and erecting iron clad cable route marker duly

marked with ELE.CABLE of size 23 cm.X 12 cm. Flushed with

ground in cement foundation as directed by Engineer in

Supplying and erecting B class Galvanized iron pipe having

smooth finished bore of the pipe on both ends erected nuts

73 and bolts along the pole / wall shaping the pipe as per site 57.00 180.79 MTR

requirement. Pipe dia as following.(a) 25 mm dia

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 1Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses

with company mark/name engraved or embossed 120 to

300 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K

to 5700K, Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.CREE /OSRAM /

74 PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make 39.00 4997.48 EA

LED used for luminaire. ( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (A)

Street Light (IP-65), Surge protection - 4KV integral and

kv non integral ,Light must have 440VAC line supply

protection. It should withstand 48 hours for 440VAC line

supply.(ii) above 48 to 60 Watts Cat-lll

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 1Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses

with company mark/name engraved or embossed 120 to

300 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K

to 5700K, Uniformity ratio >0.45, Luminaire efficacy>

75 lumens/watt . LED driver efficiency > 85 %.CREE /OSRAM / 8.00 7266.95 EA

PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make

LED used for luminaire. ( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)(B)

Flood Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

protection. (iv) above 90 to 120 watts Cat-lll

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 1Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses

with company mark/name engraved or embossed 120 to

300 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K

to 5700K, Uniformity ratio >0.45, Luminaire efficacy>

76 lumens/watt . LED driver efficiency > 85 %.CREE /OSRAM / 6.00 10818.11 EA

PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make

LED used for luminaire. ( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)(B)

Flood Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

protection.(vii) above 200 to 250 watts

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

Supply of approved make frp/grp pole having followiing

specifications :

FRP/GRP pole made by centrifugal moulding process using

thermoset resin polyester/epoxy resin system having

minimum glass content 45.0%.The pole should be in one

pieceand tapered round in shape,having smooth outside

surface finish and should be totally fre from corrosion as well

as non conductive and shock proof. Pole should be provided

with FRP/GRP base bracket dully fabricated from metal(M.S)

and dully claded with FRP/GRP material to avoid any metal

exposer and painted with PU paint. Pole should mechanical

properties i.e 1. Specfic gravity (ASTM D 792) 1.3-1.8 Kg/m3,

2. Glass Content % by weight (ASTM D 2584) 45.0 -55.0%,

Water absorption (ASTM D 570) <0.5%, 4. Tensile

Strength(ASTM D 638) 200+/-50Mpa, 5. Flexural strength

(ASTM D 790) 250+/-50Mpa, 6. Compressive Strength (ASTM

D 695) 200+/-50MPa, 7. Yeild Strength(ASTM D638)

Pole should be flame retardant as per IS 6746.Resin used

shall be UV resistance and pigmented. Pole should be

painted with first coat of epoxy primer and then two coat of

weather resistance polyurethen paint to ensure proper

addhesion of the paint.Minimum thickness shall be 80 to

micron.Defelection of the pole shall not exceed more than

10.0 % of the length of the pole for the given load.Pole

should be generally made as per the dimensional

data,performance criteria and some interchagebility features

as per the standard ANSI C123.20 latest version of ASTM D

923/01 including cable termination box with necessory

accessories.The size of pole and type of installation with

foundation , Anchor Base & Internal junction box as per the

manufacturer details and site requirement .(1) 'A' class

frp/grp pole suitable for base plate mounting [B] Overall

Length of 4.0 meter, Average thickness : 4mm, Top/Bottom

Outside Dia. 76/143mm +/-2.Weight of Pole 10.0 Kg

approx. (Without base) Metal Anchor Base dully frp claded

(Size : 290 Ø * 12mmthk , Mounting hole PCD 240mm *

nos. of 16 Ø hole)

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

Supply of approved make frp/grp pole having followiing

specifications :FRP/GRP pole made by centrifugal moulding

process using thermoset resin polyester/epoxy resin system

having minimum glass content 45.0%.The pole should be in

one pieceand tapered round in shape,having smooth outside

surface finish and should be totally fre from corrosion as well

as non conductive and shock proof. Pole should be provided

with FRP/GRP base bracket dully fabricated from metal(M.S)

and dully claded with FRP/GRP material to avoid any metal

exposer and painted with PU paint. Pole should mechanical

properties i.e 1. Specfic gravity (ASTM D 792) 1.3-1.8 Kg/m3,

2. Glass Content % by weight (ASTM D 2584) 45.0 -55.0%,

Water absorption (ASTM D 570) <0.5%, 4. Tensile

Strength(ASTM D 638) 200+/-50Mpa, 5. Flexural strength

(ASTM D 790) 250+/-50Mpa, 6. Compressive Strength (ASTM

D 695) 200+/-50MPa, 7. Yeild Strength(ASTM D638)

Pole should be flame retardant as per IS 6746.Resin used

78 shall be UV resistance and pigmented. Pole should be 2.00 13602.68 EA

painted with first coat of epoxy primer and then two coat of

weather resistance polyurethen paint to ensure proper

addhesion of the paint.Minimum thickness shall be 80 to

micron.Defelection of the pole shall not exceed more than

10.0 % of the length of the pole for the given load.Pole

should be generally made as per the dimensional

data,performance criteria and some interchagebility features

as per the standard ANSI C123.20 latest version of ASTM D

923/01 including cable termination box with necessory

accessories.The size of pole and type of installation with

foundation , Anchor Base & Internal junction box as per the

manufacturer details and site requirement .(1) 'A' class

frp/grp pole suitable for base plate mounting [D]Overall

Length of 6.0 meter, Average thickness : 5mm, Top/Bottom

Outside Dia. 76/176mm +/-2.Weight of Pole 19.0 Kg

approx. (Without base) Metal Anchor Base dully frp claded

(Size : 340 Ø * 12mmthk , Mounting hole PCD 285mm *

nos. of 20 Ø hole)

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

Supply of approved make frp/grp pole having followiing

specifications :FRP/GRP pole made by centrifugal moulding

process using thermoset resin polyester/epoxy resin system

having minimum glass content 45.0%.The pole should be in

one pieceand tapered round in shape,having smooth outside

surface finish and should be totally fre from corrosion as well

as non conductive and shock proof. Pole should be provided

with FRP/GRP base bracket dully fabricated from metal(M.S)

and dully claded with FRP/GRP material to avoid any metal

exposer and painted with PU paint. Pole should mechanical

properties i.e 1. Specfic gravity (ASTM D 792) 1.3-1.8 Kg/m3,

2. Glass Content % by weight (ASTM D 2584) 45.0 -55.0%,

Water absorption (ASTM D 570) <0.5%, 4. Tensile

Strength(ASTM D 638) 200+/-50Mpa, 5. Flexural strength

(ASTM D 790) 250+/-50Mpa, 6. Compressive Strength (ASTM

D 695)200+/-50MPa, 7. Yeild Strength(ASTM D638)

Pole should be flame retardant as per IS 6746.Resin used

shall be UV resistance and pigmented. Pole should be

painted with first coat of epoxy primer and then two coat of

highly weather resistance polyurethen paint to ensure

proper addhesion of the paint.Minimum thickness shall be

80 to 100 micron.Defelection of the pole shall not exceed

more than 10.0 % of the length of the pole for the given

load.Pole should be generally made as per the dimensional

data,performance criteria and some interchagebility features

of poles as per the standard ANSI C123.20 latest version of

ASTM D 923/01 including cable termination box with

necessory accessories.The size of pole and type of

installation with foundation , Anchor Base & Internal

junction box as per the manufacturer details and site

requirement .(1) 'A' class frp/grp pole suitable for base plate

mounting [F] Overall Length of 8.0 meter, Average

thickness : 6mm, Top/Bottom Outside Dia. 76/210mm

+/-2.Weight of Pole 39.0 Kg approx. (Without base) Metal

Anchor Base dully frp claded (Size : 390 Ø * 14mmthk

Mounting hole PCD 330mm * 6 nos. of 20 Ø hole)

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

Supplying, erecting, testing, commissioning approved make

M.S. Polygonal High Mast Pole having following general

(a) Polygonal Section fabricated from M.S. Plate confirms

BSEN 10025 & Hot deep galvanized minimum 65/86 micron

(as per IS 2629 /1985) Lantern carriage with ring and rubber

lines for erection of luminaries of suitable site.

(b) Maximum telescopic section not more than four

(c) Double drum gear pipe motorized winch with 6mm dia

S.S. Rod (For 16 mtr and above size)

(d) Approved make L.E.D. aviation light = 1 No. Lightening

arrestor = 1 No. with necessary wiring of 2.5 sq.mm 5 core

ISI copper cable Unarmoured.

(e) Bottom most section suitable for mounting reversible

motor and switchgears having door not more than 1400mm

80 x 300mm with waterproof gasket & hinges & locking 1.00 141616.14 EA

(f) Pole structure comprises suitable size of reversible motor,

cable and necessary switchgears with control panel.

(g) bottom section shall have suitable size of thickness

supports ribs foundation bolts nuts etc.

(h) Item not comprises the cost of lanterns.

(i) Necessary Cement Concrete foundation as per IS including

testing & commissioning of the entire structure for following

size of High Mast poles [1] High Mast 12 Mtr. TOP A/F

mm, BOTTOM A/F 360mm, No. of Sec. No. - 1, Bottom

Thickness - 3 mm, Size of Base Plate - Dia 520 mm x 20 mm

thick, Foundation Bolt Size M24 x 850 mm, Qty - 6 Nos.,

Suitable for mounting Fitting of Light - 6 Nos.

SR. RATE AMOUNT

PARTICULARS QUANTITY UNIT

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved

or embossed 160 to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency >

81 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: 18.00 4819.72 EA

Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (C) Post Top Lantern

LED fitting comprises of finish cast aluminum spigot and

spun aluminum canopy fixed with opal polycarbonate, pipe

arrangement for vertical mounting driver and accessories

wired upto terminal block.IP 65 (ii)32-40W Cat-lll

(c) LED Bollard fittings of minimum height 1000 mm &

dia.100mm having polycarbonate clear/milky diffuser

mounted on 3mm thick aluminium finished powder coated

82 pipe with base plate 160x160mm with erection by 8.00 4461.17 EA

M8x75mm fastner with required RCC foundation.IP65 for

to 20 watt and above ,surge-4kv cat-III

Supplying & erecting approved make Digital time switch

having lithium cell 6 years operative and operate battery

backup 1 channel day clock with 14 memory programme,

suitable to operate on 240V + 5%, 16A with, floating

83 contacts Minimum switching setup time 1 minimum & LCD 1.00 3168.37 EA

display. Also comprised permanent ON/OFF switching.

Programming switches & housed in fire proof thermoplastic

enclosure & transparent cover erected as required with

necessary connection erected as directed.

Sub total Part-07

TOTAL (PART-1 TO PART-7) ₹

TOTAL PROJECT COST

Executive Engineer

South Zone - A (Udhna)

Sign of Contractor Surat Municipal Corporation