Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹4.6 Cr
EMD Value
₹4.6 L
Closing Date
5 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer Sipu Project Division, Palanpur
Widening, Resurfacing and Strenthning work of SH-132 to Gundiwada Peri-Feri Road of Sipu Dam project , Ta. Dantiwada, Dist. Banaskantha.
363659
Notice No : 17 of 2026-27
Open
Civil Works - Roads
Works
Banaskantha
10 documents required · 10 mandatory
₹6,000
Executive Engineer Sipu Project Division Palanpur
₹4.6 L
5 Nov 2026
5 Nov 2026
5 Nov 2026
5 Dec 2026
5 Nov 2026
120 days
BILL OF QUANTITIES
Name of Work :- Widening, Resurfacing and Strenthning work of SH-132 to
Gundiwada Peri-Feri Road of Sipu Dam project , Ta. Dantiwada,
Dist. Banaskantha.
(A) Percentage Rate Tender (Up to INR 50 Cr. )
Item Description of Item (with brief specification Rate In
Quantity Unit Amount
No and reference to book of specifications) figures
1 Clearing and grubbing road land including
uprooting rank vegetation grass bushes,shrubs,
sapling and trees girth up to 300 mm removal of
stumps of trees cut earlier and disposal of
unserviceable materials (C) By mechanical means
in area of light jungle.
2 Box cutting the road surface to proper slope and
camber for making a base of road work including
removing the excavated stuff and depositing on
the road side slops as directed upto 50 mts. Lead.
3 Earthwork for embankment including breaking
clods, dressing with all lead and lift (excluding
watering and consolidation)(D) From Borrow
area within 2.0 Km. lead
4 Rolling of Earth work in layers with vibratory
roller including filling in depressions which occur
during the process and Watering of earth work as
5 Providing laying spreading and compacting
mm thick granular sub base (G.S.B.) with
specified material MC BT Metal of size 53 to
26.5mm 35%, 26.5mm to 4.75mm 45% and
below 2.36mm stone dust 20% mix (Grade-I)
having C.B.R. not less than 30 incl. mixing the
material at OMC at site and spreading in uniform
layer base and compacting with power roller to
achieve the desired density incl. all materials,
labour and machinery, lighting guarding,
bracketing and maintenance of diversion etc.
complete as per MORT&H clause 401.12.50
6 Provdining and laying W.B.M of B.T.M.C metal of
size 45 mm to 63 mm sizeincluding 0.12 Cu.M.
Stone Screeing & 0.08 Cu.M. stone dust as filler
including spreading, watering & consolidation by
vibratory roller 80KN to 100KN static weight.
mm thick compected each of two layer.
7 Providing and laying, spreading and compacting
150 mm thick graded stone aggregate to Wet Mix
Macadam (W.M.M.) specification including
premixing the material with water at OMC in
mechanical mix plant carriage of mixed material
by tipper to site, laying in uniform layers with
mechanical means Paver Finisher in sub-base
/base course on well prepared surface and
compacting with vibratory roller to achieve the
desired density.
8 Providing & applying evenly priming coat with
bitumen Emulsion (SS1) on prepared surface of
granular base including cleaning of road surface
and sparying primer at the rate of 7.50 Kg. /
Item Description of Item (with brief specification Rate In
Quantity Unit Amount
No and reference to book of specifications) figures
Smt using using mechanical means. (RA).
9 Providing and laying 37.50 mm thick B.M. using
M.C stone B.T. stone. as per M.O.R.T. & H.
specification & bitumen grade VG 30 for mixing
at the rate of 34 Kg./M.T. i.e. 3.40% of total
weight of mix including heating the aggregate and
asphalt in continuous batching drum mix plant
and spreading the same by paver finisher and
consolidation with vibratory roller including
paving all materials equipments, tools & plants,
fire wood, oil, kerosene, labour charges etc
complete using contractor's own machinery drum
mix plant & paver finisher etc. complete.
10 Providing and laying 50.00 mm thick B.M. using
M.C stone B.T. stone. as per M.O.R.T. & H.
specification & asphalt for tack coat at the rate of
2.5 Kg./10 Sqm. with mechanical sprayer &
bitumen grade VG 30 for mixing at the rate of
Kg./M.T. i.e. 3.40% of total weight of mix
including heating the aggregate and asphalt in
continuous batching drum mix plant and
preading the same by paver finisher and
consolidation with vibratory roller including
paving all materials equipments, tools & plants,
fire wood, oil, kerosene, labour charges etc
complete using contractor's own machinery drum
mix plant & paver finisher etc. complete.
11 Providing and laying 20 mm thick M.S.S. using
B.T. aggregates (As per MORTH & H gradation)
and asphalt grade VG-30 at the rate of 5.10% of
mix i.e. 51.00 Kg./MT including heating the
asphalt and aggregate by continuous batching
drum mix plant, transporting the mixed material
by tipper trucks and spreading the same by aver 556.00 M.T. 4893.240
finisher and consolidation by vibratory roller of
80 to 100 KN static weight including providing
equipment, tools and plant, firewood lubricants,
kerosene, oil, labour charges using contractor's
own machineries drum mix palnt and paver
12 Providing Hard Side Solder of 100mm thick for
embankment using quarry spall with all lead and
lift and including watering and rolling and
consolidation of sub grade in layers at OMC to
required dry density including filling the
pressions which occur during the process using
power roller 8T to 10 T (Selected Quarry Spall
having CBR value not less than 20.00).
13 Scarifying gravelled macadam or bitumen
macadam surface 6 cm to 10 cm.depth including
stacking useful materials on road side and
disposing off remaining stuff.
14 Providing and laying asphalt painting on BT
surface with bitumen grade VG-30 at the rate of
Kg /10 Sqm. By mechanical sprayer and 11660.00 Sq.Mt 45.000
spreading the stone dust on prepared surface at
the rate of 0.03 Cum. / 10 Sqm. etc. complete and
Item Description of Item (with brief specification Rate In
Quantity Unit Amount
No and reference to book of specifications) figures
rolling with PTR and roller brushing etc.
15 Excavation in all sorts of soil (including wet and
slushy condition of soil) with yellow, sandy,
gravelly soil including soft murrum & H.M.
including sorting & stacking and depositing the
excavated stuff in uniform layers as and where 931.00 Cu.M 79.000
directed upto lead of 30 m and lift as shown
below including clearing the site etc. compute
(including dewatering). (B) For foundation
trenches of C.D. work (a) 0 to 3 Mt. depth
16 Providing and laying foundation concrete of
proportion as under by using cement, sand and
machine crushed course aggregate laid in situ
including necessary temping, smooth finishing,
watering and curing as directed with all leads and
lifts etc complete. (a) PCC 1:3:6
17 Providing and laying in position reinforce cement
concrete using crushed aggregate including
providing necessary form work, centering,
vibrating, smooth specified finishing, curring as 271.00 Cu.M 5996.000
required for specified leads and all lifts etc
complete in M-20 grade.(c) for walls, including
top and bottom slab of outlet sluice etc complete.
18 Providing and laying in position reinforce cement
concrete using crushed aggregate including
providing necessary form work, centering,
vibrating, smooth specified finishing, curring as 25.00 Cu.M 5464.000
required for specified leads and all lifts etc
complete in M-15 grade.(c) for walls, including
top and bottom slab of outlet sluice etc complete.
19 Providing and laying HYSD/TMT Fe-415,500D
steel bar reinforcement for R.C.C. works and
anchor bars with providing binding wires
including cutting, bending, welding, binding in
position, hooking, placing in position with all
leads & lifts etc. complete. (c) TMT Fe-500D
20 Providing galvznized iron/cast iron 100mm dia
water spouts incl. necessary iron fittings as per
design and drawing etc. comp. as per Most
21 Dismentalling C.C Foundation or Flooring Sorting
& stacking useful and unuseful material from the
dismentalled materials in lead upto 200mt. As
directed under detailed specification etc.comp.
22 Providing and laying in position cement concrete
M15 using cement, Sand and machine crushed
course aggregate including providing necessary 214.02 Cu.M 4439.000
form work, compaction, finishing and curring as
required etc. completed.
23 Providing and laying in position reinforce cement
concrete using crushed aggregate including
providing necessary form work, centering,
vibrating, smooth specified finishing, curring as
required for specified leads and all lifts etc
complete in M-20 grade.(a) for Foundation
Item Description of Item (with brief specification Rate In
Quantity Unit Amount
No and reference to book of specifications) figures
24 Filling available excavated earth (excluding rock)
in trenches. plinth, sides of foundations etc. in
layers not exceeding 20 cm. in depth 477.00 Cu.M 136.920
consolidating each disposited layer by ramming
25 Providing cast in situ cement concrete M-20
grade for R.C.C. work as per drawings and designs
with form work, centering, scaffolding etc. 326.50 Cu.M 4570.000
vibrating, curing finishing as specified with all
leads & lifts. etc. complete.
26 Dismentalling of RCC work viz. slab,
beam,lintel,barrel,staircase etc. including
removing the steel from the dismentelled portion
without damage to reinforcement sorting & 310.40 Cu.M 1514.900
stacking of useful and unuseful material from the
dismentalled materials as directed under detailed
specifications etc. complete.
27 Providing flood gauge marks on sub structure as
per design including painting complete.
28 Providing masonry steps with Cement Pointing
on approaches as directed.
29 Providing and laying filter media 600 mm thick as
directed at the back of abutments, returns walls 804.79 Sq.Mt 1239.350
as per detailed specifications.
30 Backfill with selected earth including ramming
consolidation including watering with lead and 1026.57 Cu.M 67.000
lift etc. complete. (a) 0 to 30m
31 Diversion of water course, providing cofferdam
and bund or island as may be necessary for
foundation and maintaining the same for the
period as may be necessary.
32 Excavation in all sorts of strata and formations
including depositing the unuseful excavated stuff
as and where directed including sorting and
stacking useful materials as required and upto 2397.20 Cu.M 89.000
lead of 200mt. And all lifts etc. complete,
including dewatering. (a) ln Overburden
including hard murrum.
33 Providing and fixing mild steel dowel bars of
minimum 32mm dia. for anchoring by drilling
holes in foundation strata including necessary
bending, hooking of dowel bars and grouting the
holes complete as per detailed drawing and as
34 Providing and laying rubble for appron (each
stone weighting not less than 40Kg.) including
and packing and filing in the interestices with
35 Providing cast in situ controlled concrete M-25
mix for R.C.C. including necessary centering, form
work, scaffolding and vibrating, curing finishing 25.00 Cu.M 4946.000
as specified with all specified leads and lifts etc.
complete.(a) Pier Cap.
36 Providing and laying in position FE 550D TMT 0.75 M.T. 91141.810
Item Description of Item (with brief specification Rate In
Quantity Unit Amount
No and reference to book of specifications) figures
bar reinforcement with Providing fusion bonded
Epoxy coating not less than 175 micron thickness
and up to 300 micron to reinforcement bars as
per IS-13620-1993/ASTM-775 M including
testing of coating at plant including cutting,
bending, hooking and tying complete as per
detailed drawings for the following.(A) Piers (B)
Abutments (C) R.C.C. Returns
37 Providing and laying in position FE 550D TMT
bar reinforcement with Providing fusion bonded
Epoxy coating not less than 175 micron thickness
and up to 300 micron to reinforcement bars as
per IS-13620-1993/ASTM-775 M including 4.28 M.T. 91141.810
testing of coating at plant including cutting,
bending, hooking and tying complete as per
detailed drawings for the following.(A) Piercap
(B) Abutmentcap
38 Providing weepholes in Abutments, and returns
by using A.C pipe of 100 mm inculing laying in
proper grade and joining the completed as per
detailed specification.
39 Providing and fixing in position Mild steel dowel
bars in pier caps or abutments caps for anchorage
in fixed as per detailed drawing including cutting,
bending and welding complete.
40 Providing and fixing in position Mild steel dowel
bars in pier caps or abutments caps for anchorage
in free end as per detailed drawing including
cutting, bending and welding complete.
41 Providing and casting in situ controlled cement
concrete M-300 for R.C.C. solid slab including
centering, scaffolding, curing and finishing
42 Providing and laying in position FE 550D TMT
bar reinforcement with Providing fusion bonded
Epoxy coating not less than 175 micron thickness
and up to 300 micron to reinforcement bars as
per IS-13620-1993/ASTM-775 M including 12.60 M.T. 91141.810
testing of coating at plant including cutting,
bending, hooking and tying complete as per
detailed drawings for the following. (I) Solid Slab.
43 Providing and Fixing Pre-moulded asphalt filler
joints as per drawings.(A)20mm
44 Providing and casting in situ controlled cement
concrete M-400 for average 100 mm thick
wearing coat laid as directed dincluding tamping, 18.60 Cu.M 5012.720
vibrating, finishing, curing and fillingin joints
with bitumen complete.
45 Providing and casting in situ controlled cement
concrete M-400 for Crash barrier including 19.34 Cu.M 4836.720
formwork curing and finishing, complete.
46 Providing and fixing marble slab including
engraving and painting complete. 2.00 Nos. 991.000
(iii) Size 60cm x 45cm x 4cm
Item Description of Item (with brief specification Rate In
Quantity Unit Amount
No and reference to book of specifications) figures
47 Providing and casting in situ ordinary cement
concrete concrete M-150 for approach slab
including formwork curing and finishing
48 Providing and casting in situ controlled cement
concrete concrete M-300 for approach slab
including formwork curing and finishing
49 Providing and laying in position FE 550D TMT
bar reinforcement with Providing fusion bonded
Epoxy coating not less than 175 micron thickness
and up to 300 micron to reinforcement bars as
per IS-13620-1993/ASTM-775 M including
testing of coating at plant including cutting,
bending, hooking and tying complete as per
detailed drawings for the following. (A) R.C.C.
Crash Barrier (B) R.C.C. Footpath. (C)
R.C.C. Approch slab.(D) Wearing Coat.
50 Supplying & laying of bi-axial extruded high
modulus polypropylene geogrid conforming to
MORT&H specification for base/sub-base
reinforcement having minimum tensile strength
30kN/m in the longitudinal and transverse
direction, with 10.5kN/m and 21kN/m tensile
strength at 2% and 5% strain respectively in the
longitudinal and transverse direction, junction
efficiency not less than 95% and with 38mm X
38mm mesh opening.
51 Providing Yellow and Black Patta ( three coat)
including distempeing (Three coats) with oil
bound distemper of approved brand and
manufacture and of required shade on wall
surfaces to give an even shade, over and including
a priming coat with distemper primer of
approved brand and manufacture after
thoroughly brushing the surface free from mortar
dropping and other foreign matter and also
including preparing the surface even and sand
papered smooth as per instruction of Engineer
52 Providing and laying foundation concrete of
proportion as under by using cement, sand and
machine crushed course aggregate laid in situ
including necessary temping, smooth finishing,
watering and curing as directed with all leads and
lifts etc complete. (b) PCC 1:4:8
53 Providing and casting in site Controlled cement
concrete M-250 for average 200 mm thick as
directed including compacting with surface
mechanical screed vibrating,mechanical
floater,chennaling form work and grooving 247.00 Cu.M 5432.960
including filling asphalt filer joint Excluding
dowel bar ,tie bar expansion,construction and
contruction joint as per insruction engineer in
54 Earth work in embankment from borrow pits in 1080.38 Cu.M 88.000
Item Description of Item (with brief specification Rate In
Quantity Unit Amount
No and reference to book of specifications) figures
all sorts of soil and soft murum or other suitable
strata as directed including breaking the clods
and dressing to the design sections including
cutting the proud section with lead as under and
all lift including site clearing etc. complete. c)
55 Diversion Ahead Sign :-Providing and fixing
sign boards made out of 2mm aluminium sheet
/ 4mm ACP (Aluminum composite Panel); size
180x60 cms. rectangular as per design of IRC-67-
2012. Pre treated with phospheting process s acid
etching; coated with one coat of poxy primer and
two coats of best quality epoxy paint ;
reflectorised with High Intensity Prismatic
Grade retro refiectivesheeting of Type-4 as
per ASTM D-4G56 and latest
M.O.S.T.Specifications; 3.1 mtr long stand post (2
Nos.) of Iron Angle 50 x 50 x 5mm / 50NB
Circular MS Pipe s required and frame fabricated
from suitable size iron angle of 35 x 35 x 3mm; 2.00 No. 9867.070
painted with bestquality epoxy coatings in black
and white bends. The details of symbol for each
board shall be as per the instruction of engineer
in charge. The fixing at site shall be in 1:2:4 CC
blockof size 45 x 45 x 60 Cms. for each leg
including excavation, curing etc.complete under
the supervision of engineer in charge. A warranty
for 7 years for the Retro reflective sheeting from
original manufacturer s a certified copy of 3 year
outdoor exposure test report from hird party test
lab for the product offered shall be submitted by
(B) Class-B Type-4 Retro Reflective sheeting
56 Portable Barricade in Construction Zone
(Installation of a steel portable barricade with
horizontal rail 300 mm wide, 2.5 m in length
fitted on a 'A' frame made with 45 x 45 x 5 mm
angle iron section, 1.5 m in height, horizontal rail 2.00 No. 3035.050
painted (2 coats) with yellow and white stripes,
150 mm in width at an angle of 450, 'A' frame
painted with 2 coats of yellow paint, complete as
per IRC:SP:55-2001 )
57 Chevron sign :-Providing and fixing sign boards
made out of 1.5mm aluminium sheet / 3mm ACP
(Aluminum composite Panel); size 60x50cm
rectangular as per design of IRC-67-2012. Pre
treated with phospheting process & acid etching;
coated with one coat of epoxy primer and two
coats of best quality epoxy paint ; reflectorised
with High Intensity Prismatic Grade retro
refiectivesheeting of Type-4 as per ASTM D-4956
and latest M.O.S.T.Specifications; 3.3 mtr long
stand post of Iron Angle 75 x 75 x 6mm / 65NB
Circular MS Pipe as required and frame fabricated
from suitable size iron angle of35x35x3mm;
painted with bestquality epoxy coatings in black
and white bends. the details of symbol or
inscription / numerals for each board shall be as
Item Description of Item (with brief specification Rate In
Quantity Unit Amount
No and reference to book of specifications) figures
per the instruction of engineer in charge. The
fixing at site shall be in 1:2:4 CC blockof size 45 x
45 x 60 Cms. for each leg including excavation,
curing etc.complete under the supervision of
engineer in charge. A warranty for 7 years for the
Retro reflective sheeting from original
manufacturer & a certified copy of 3 year outdoor
exposure test report from third party test lab for
the product offered shall be submitted by
contractor. (A) Class-B Type-4 Retro Reflective
58 Hazard Marker Sign :-Providing and fixing sign
boards made out of 2.0 mm aluminium sheet /
mm ACP (Aluminum composite Panel); size
90x30 cms. rectangular as per design of IRC-67-
2012. Pre treated with phospheting process &
acid etching; coated with one coat of epoxy
primer and two coats of best quality epoxy paint ;
reflectorised with High Intensity Prismatic Grade
retro refiectivesheeting of Type-4 as per ASTM D-
4956 and latest M.O.S.T.Specifications; 1.8mtr
long stand post of Iron Angle 75 x 75 x 6mm /
65NB Circular MS Pipe as required and frame
fabricated from suitable size iron angle of 35 x
x 3mm; painted with bestquality epoxy coatings
in black and white bends. The details of symbol
for each board shall be as per the instruction of
engineer in charge. The fixing at site shall be in
1:2:4 CC blockof size 45 x 45 x 60 Cms. for each
leg including excavation, curing etc.complete
under the supervision of engineer in charge. A
warranty for 7 years for the Retro reflective
sheeting from original manufacturer & a certified
copy of 3 year outdoor exposure test report from
third party test lab for the product offered shall
be submitted by contractor. (B) Class-B Type-4
Retro Reflective sheeting.
59 Regulatory/Mandatory signs :-Providing and
fixing sing boards made out of 4mm ACP
(Aluminium Composite Panel); size 60 cms dia
Circle as per design of IRC-67-2012. Pre treated
with phospheting process & acid etching; coated
with one coat of epoxy primer and two coats of
best quality epoxy paint ; reflectorised with High
Intensity Prismatic Grade retro reflective
sheeting of Type-4 as per ASTM D-4956 and
latest MOST Specifications; 3.6mtr long stand
post of Iron Angle 75 x 75 x 6 mm / 65NB Circular
MS Pipe as required and frame fabricated from
suitable size iron angle of 35 x 35 x 3mm; painted
with best quality epoxy coatings in black and
white bends. The details of symbol for each board
shall be as per the instruction of engineer in
charge. The fixing at site shall be in 1:2:4 CC block
of size 45 x 45 x 60 Cms. for each leg including
excavation, curing etc.complete under the
supervision of engineer in charge. A warranty for
7 years for the Retro reflective sheeting from
original manufacturer shall be submitted by
Item Description of Item (with brief specification Rate In
Quantity Unit Amount
No and reference to book of specifications) figures
contractor. (A) Class-B Type-4 Retro Reflective
60 Supplying and fixing reinforced concrete heavy
duty non-pressure pipes with collars for
culverts carrying heavy traffic as per IS 458-
1991 specifications including setting the pipes in 45.00 Rmt 5560.010
C.M.1:2 watering and laying (to level or slopes) of
class NP3 of following internal daimeters. (v)
61 Providing and filling in foundation with ordinary
Cement concrete M-100 mix and providing
necessary vertical pin headers including 13.50 Cu.M 3189.730
formwork, vibrating, ramming
and curing complete.
62 Road marking with hot applied thermoplastic
paints with reflectorising glass beads on bitumin
surface providing and laying a hot applied
thermoplastic compound 2.5 mm thick including
reflectorising glass beads @ 250gms per sqm
area, thickness of 2.5mm is excluding of surface
applied glass beds as per IRC:35- 2015. The
finished surface to be level, uniform and free from
streaks and holes. zebra patta /bump patta
lane/center line/ edge line/cut patta. The white 602.00 Sq.Mt 367.720
color marking should provide liminance
coefficinet on cemend road shalll be min
mcd/m2/lux and Asphalt road shall be min
mcd/m2/lux during the service life during the
day time. The marking should meet the
performance criteria for night time reflectivity,
wet reflectivity and skid resistance as mentioned
in the section-15 of IRC 35-2015. Warranty for
the Retro reflectivity should be two years.
63 Cat Eye / Road Stud / RPM: Supplying of Molded
Twin Shanks Raised Pavement Markers made of
polycarbonate and ABS moulded body and
reflective panels with micro prismatic lens
capable of providing total internal reflection of
the light entering the lens face and shall support a
load of 13635 kgs. tested in accordance to ASTM
D 4280 Type H and complying to Specifications of
Category A of MORTH Circular No
RW/NH/33023/10-97 DO III Dt 11.06. 1997. The
height, width and length shall not exceed 20 mm,
130 mm and 130 mm and with minimum
reflective area of 13 Sqcm on each side and the
slope to the base shall be 35 +/- 5 degree. The
strength of detachment of the integrated
cylindrical shanks, (of diameter not less than
+/- 2 mm and height not less than 30+/- 2 mm)
from the body is to be a minimum value of
Kgf. Fixing will be by drilling holes on the road for
the shanks to go inside, without nails and using
epoxy resin based adhesive as per manufacturers
recommendation and The color of the marker
should be as per the IRC 35-2015 and as directed
by Engineer-in-charge.
Item Description of Item (with brief specification Rate In
Quantity Unit Amount
No and reference to book of specifications) figures
64 Cautionary Warning Sign:- Providing and fixing
sign boards made out of 2mm aluminium sheet /
4mm ACP (Aluminum composite Panel); size 90 x
90 x 90 cms. equilateral triangle as per design of
IRC-67-2012. Pre treated with phospheting
process & acid etching; coated with one coat of
epoxy primer and two coats of best quality epoxy
paint ; reflectorised with High Intensity Prismatic
Grade retro refiectivesheeting of Type-4 as per
ASTM D-4956 and latest M.O.S.T.Specifications;
3.6mtr long stand post of Iron Angle 75 x 75 x
6mm / 65NB Circular MS Pipe as required and
frame fabricated from suitable size iron angle of
35 x 35 x 3mm; painted with bestquality epoxy
coatings in black and white bends. The details of
symbol for each board shall be as per the
instruction of engineer in charge. The fixing at
site shall be in 1:2:4 CC blockof size 45 x 45 x
Cms. for each leg including excavation, curing
etc.complete under the supervision of engineer in
charge. A warranty for 7 years for the Retro
reflective sheeting from original manufacturer &
a certified copy of 3 year outdoor exposure test
report from third party test lab for the product
offered shall be submitted by contractor.
(B)Class-B Type-4 Retro Reflective sheeting.
65 Providing and erecting a "Thrie" W - metal beam
crash barrier comprising of 3 mm thick
corrugated sheet metal beam rail, 85 cm above
road/ground level, fixed on ISMC series channel
vertical post, 150 x 75 x 5 mm spaced 2 m centre
to centre, 2 m high with 1.15 m below ground
level. The vertical post fixing at site shall be in
M25 grade Cement concrete of size 35 x 35 x
cms. for each post including excavation curing
etc. complete. All steel parts and fitments to be
galvanised by hot dip process, all fittings to
confirm to IS:1367 and IS:1364, metal beam rail
to be fixed on the vertical Post with a spacer of 160.00 Rmt 4666.020
channel section 150 x 75 x 5 mm, 550 mm long
complete as per Morth Specification clause
including butt welding to all nuts & bolts &
including 3 mm ACM type reflector 100 mm wide
& 4.5 m long, type -4 class B High intensity Grade
Sheeting as per IRC 67:2012 etc. complete as per
instruction of Engineer In Charge. Also radium
red/yellow colour strip of size 100 x 300 mm
shall be fixed on vertical front side of post for
better night visibility. The spacer,post, thrie beam
raill shall be Cold roll formed & galvanized with
550 gm/ square meter.
66 providing and casting in-situ cement concrete M
250 for R.C.C raft and cut off walls including
necessary shuttering, laying vibrating, ramming
and curing complete.
67 Back fill with selected earth from out side borrow
area or from excavated usefull material including 316.28 Cu.M 145.000
watering, ramming, consolidation etc. with
Item Description of Item (with brief specification Rate In
Quantity Unit Amount
No and reference to book of specifications) figures
pneumatic templing and lead upto 1.0 Km. and all
lift etc. completed.
68 Excavation for foundation upto 1.5 m depth
including sorting out and stacking of useful
material and disposing off the excavated stuff
upto 50 m lead (A) Loose or soft soil
69 Providing and laying CC 1:2:4 grade using
cement, sand & crushed metal incuding providing
& erecting necessary form work, centering,
vibrating, smooth finishing, watering & curing as
directed with all leads & lifts etc. complete. (a)
70 Providing TMT Bar FE 500D reinforcement for
R.C.C. work including bending, binding and 16219.00 Kg 77.290
placing in position complete upto floor two level
71 Providing weep holes 1 00 or 110 mm dia.of pipe
in the retaining wall etc complete. (B) P.V.C Pipe
72 Dismentalling road surface including sorting &
stacking of useful and unuseful material from the
dismentalled materials as directed under detailed
specifications etc. complete (a) Cement Concrete
73 Providing and fixing Pre Cast hectometer stone as
per I.R.C. type design including painting, lettering 13.00 No. 356.500
etc.complete. (I) Fixing in CC 1:5:10
74 Providing and fixing ordinary Kilometer stone of
precast C.C. 1:2:4 including necessary
reinforcement as per I.R.C. type design in C.C.
1:4:8 including painting,lettering etc. complete
75 Citizen's Information Board - Providing and fixing
of typical PROJECTinformation board as per
instruction. Two ACP Sheets of 3 mm thick, of
mm x 750 mm size fixed at top & bottom duly
rivetted with MS angles of 25 x 25 x 5 mm thick
M.S. angles shall be welded by two vertical M.S.
angle shall be welded by two vertical M.S. angle of
5 mm thick to 75 mm x 75 mm of 12 SWG square
tubes posts duly embedded in cement concrete
M-15 grade blocks of 60 x 60 x 75 Cm, below 1.00 No. 10114.900
ground level. The letters & figure of any shade
reflectorised with High Inensity Prismatic Grade
Retro Reflective Sheeting of Type-4 as per ASTM
D-4956 and latest MORTH specifications; All
section of framed posts and steel tube will be
painted with primer and two coats of epoxy
paints as per drawing Clause 1701 and Annexure
1700.1 (10.16). (A) Class-B High intensity Grade
Retro Reflective sheeting.
76 Direction (Junction) Sign :-Providing and fixing
sign boards made out of 2mm aluminium sheet /
4mm ACP (Aluminum composite Panel); size
244x122 cms. rectangular as per design of IRC-
67-2012. Pre treated with phospheting process & 2.00 No. 21287.510
acid etching; coated with one coat of epoxy
primer and two coats of best quality epoxy paint ;
reflectorised with High Intensity Prismatic Grade
retro refiectivesheeting of Type-4 as per ASTM D-
Item Description of Item (with brief specification Rate In
Quantity Unit Amount
No and reference to book of specifications) figures
4956 and latest M.O.S.T.Specifications; 4.0mtr (2
Nos.) long stand post of Iron Angle 75 x 75 x 6mm
/ 65NB Circular MS Pipe as required and frame
fabricated from suitable size iron angle of
50x50x5mm; painted with bestquality epoxy
coatings in black and white bends. The details of
symbol for each board shall be as per the
instruction of engineer in charge. The fixing at
site shall be in 1:2:4 CC blockof size 45 x 45 x
Cms. for each leg including excavation, curing
etc.complete under the supervision of engineer in
charge. A warranty for 7 years for the Retro
reflective sheeting from original manufacturer &
a certified copy of 3 year outdoor exposure test
report from third party test lab for the product
offered shall be submitted by contractor. (B)
Class-B Type-4 Retro Reflective sheeting
77 Village name Sign :-Providing and fixing sign
boards made out of 2mm aluminium sheet / 4mm
ACP (Aluminum composite Panel); size 90x60
cms. rectangular as per design of IRC-67-2012.
Pre treated with phospheting process & acid
etching; coated with one coat of epoxy primer
and two coats of best quality epoxy paint ;
reflectorised with High Intensity Prismatic Grade
retro refiectivesheeting of Type-4 as per ASTM D-
4956 and latest M.O.S.T.Specifications; 3.3mtr
long stand post of Iron Angle 75 x 75 x 6mm /
65NB Circular MS Pipe as required and frame
fabricated from suitable size iron angle of 35 x
x 3mm; painted with bestquality epoxy coatings 1.00 No. 6397.430
in black and white bends. the details of symbol or
inscription / numerals for each board shall be as
per the instruction of engineer in charge. The
fixing at site shall be in 1:2:4 CC blockof size 45 x
45 x 60 Cms. for each leg including excavation,
curing etc.complete under the supervision of
engineer in charge. A warranty for 7 years for the
Retro reflective sheeting from original
manufacturer & a certified copy of 3 year outdoor
exposure test report from third party test lab for
the product offered shall be submitted by
contractor. (B) Class-B Type-4 Retro Reflective
78 Chevron Sign {DOUBLE}:Providing and Fixing
Sign Boards made out of 1.5 mm alluminium
Sheet/3mm ACP (Alluminium Composite Panel);
Size 60x50 cm as per design of IRC-67-2012.Pre-
treated with phospheting process&acidetching
;coated with one coat of epoxy primer and two
coats of best quality epoxy paint; reflectorised
with Micro Prismatic Grade retro reflective 15.00 No. 5605.500
sheeting of Type-11 as per ASTMD-4956 and
latest M.O.S.T. Specifications :3.3 mtr.long stand
post of 75x75x6mm/6SNB Circular MS Pipe as
required and frame fabricated from suitable size
iron angle of 50x50 5mm; painted with best
quality epoxy coatings in black and white bends,
The details of Symbole or in scription/numerals
Item Description of Item (with brief specification Rate In
Quantity Unit Amount
No and reference to book of specifications) figures
for each board shall be as per the instruction of
engineer in charge.The fixing at site shall be in
1:2:4C block of size 45x45x60cms.for each leg.
including excavation, curing etc...complete under
the supervision of engineer -in-charge. A
warranty for 7years for the Retroreflective
sheeting from original manufacturer& a certified
copy of 3 year out door exposure test report from
third party test lab for the product offered shall
be submitted by contractor (A) Class-B Type-4
Retro Reflective Sheeting)
79 STOP Sign :-Providing and fixing sing boards
made out of 4mm ACP (Aluminium Composite
Panel); size 90 cms. Octagonal as per design of
IRC-67-2012. Pre treated with phospheting
process & acid etching; coated with one coat of
epoxy primer and two coats of best quality epoxy
paint ; reflectorised with High Intensity Prismatic
Grade retro refiective sheeting of Type-4 as per
ASTM D-4956 and latest MORD Specifications;
3.1mtr long stand post of Iron Angle 75 x 75 x
mm / 65NB Circular MS Pipe as required and
frame fabricated from suitable size iron angle of 1.00 No. 6704.360
35 x 35 x 3mm; painted with best quality epoxy
coatings in black and white bends. The details of
symbol for each board shall be as per the
instruction of engineer in charge. The fixing at
site shall be in 1:2:4 CC block of size 45 x 45 x
Cms. for each leg including excavation, curing
etc.complete under the supervision of engineer in
charge. A warranty for 7 years for the Retro
reflective sheeting from original manufacturer
shall be submitted by contractor. (A) Class-B
Type-4 Retro Reflective Sheeting
Credit For Diversion 70% -442483.45
Rupees Four Crore Sixty One Lakh Forty Five Thousand Nine Paise Twenty Five
I/We am/are willing to carry out the work at… ...................... % above/below percent(Should
be written in figures and words) of the estimated rate mentioned above. Amount of my /our
tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
In words In words
Deputy Executive Engineer Sr. Divisional Accounts Officer Executive Engineer
Sipu Proj. H.W. Sub Dn. No.1 Sipu Project Division Sipu Project Division
Dantiwada Palanpur Palanpur
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
2. SBD SH132 to Gundiwada Road.pdf
3. TS-SH132 to Gundiwada Road.pdf
BOQ SH132 to Gundiwada Road.pdf
SH132 to Gundiwada Drawing.pdf
Nivida No-17 of 2026-27 (Gujarati-English).pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .