Laying of 11kv HV Cable at HWBF , Talcher

Amount

Making common trench by digging earth manaully to a depth of 1200 mm and width 600 mm. The job also includes removal of 11KV, 3X150sq mm XLPE cable from trench after diging of existing trench as where required.

Provision of Night Watchmen to prevent cable theft.

Supply of 6.35KV (UE)/11KV (E) Heat shrink straight through jointing kit suitable for jointing of 3 X 150 sq mm XLPE cable. Make:3M/Raychem

Making joints of 3 X 150 sq mm 11KV XLPE cable using joining kit by experienced cable jointer including arrangement of temporary shed as when required

Supply of 6.35KV (UE)/11KV (E),3 X 150 sq mm heat shrink indoor end termination kit suitable for termination of 3 X 150 sq mm XLPE cable. Make:3M/Raychem.

End termination of 11KV XLPE cable of size from 3 X 150 sq mm using end termination kit by experienced cable jointer

Laying of cable with sand bedding at depth of 1200 mm, width 600 mm, top and side brick supports, Back filling of earth and ramming etc.(cable will be issued as free supply from department store if required.)

Supply and installation of cable route marker 60 cm X 25 cm X 7.5cm thick RCC slab with 11KV HV cable inscription there on grouted at jointing area / bend area.

Putting extra cement concrete 1:3:6 (1 cement:3 coarse sand :6 graded stone aggregate 20 mm nominal size) at cable exposed area as where required.

SANJAY KUMAR SINGH (BID ID -3232872)