PROVISION OF CHAIN LINK FENCING AND GALVALUME SHEET

Amount

Excavation in post holes (or similar holes) in soft/loose soil each n exc 0.5 cum and getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and directed.

Material and labour for Plain Cement concrete in foundations, filling and mass concrete 1:3:6 type C2 using 40mm graded stone aggregate as in floor and other similar type of works, finished even and fair without using extra cement complete all as specified and directed.

Supply and fix mild steel angle iron, flat, round bar sections as in pickets brackets, post and structs in fencing including cutting top as shape as directed, drilling holes, notching for wire etc flat iron fillets(for securing chain link fencing) of section conforming to Fe-410-W (Gde.E-250) quality-A or Fe-290 Gde E-165 all as specified and as directed.

Supply and fix mild steel bolts, purpose made with hexagonal or square head one end and screwed the other or screwed both ends each screwed end fitted with washers and one heagonal or square nut etc exceeding 10cm long but not exceeding 15 cm long, diameter of neck 12mm all as specified and as directed.

Supply and Fix mild steel round bar 10mm dia tied to fencing post to hold the chain link in position includingprovision of binding wire complete all as specified and as directed.

Supply and fix Mild steel flat iron section as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply and fixing chain link fencing, MS galvanised of size 100mmx100mm, 3.15mm dia conforming to IS 2721, fixing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire all as specified and as directed.

Supply and Fix Galvanized, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed. (each line wire to be measured)

Material and Labour for drilling holes of suitable dia in to the RCC coloumn/beam of security wall for inserting 10mm to 12mm dia hodfast/fasteners for fixing the gusset/ bracing plate of not more than 10 mm thick etc.., complete complete all as directed.

Supply and fixing pre-colour coated high tensile strength galvalume sheet roofing with yield strength (550 MPA) prepainted with aluminium (55%) and zinc (45%) alloy coating applied through continous hot dip process having tatal coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete acessories as per manufacturer's instructions through specialist agency complete all as specified and as directed.

Supply and fix mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with rivetted or bolted or welded attachment all as specified and as directed.

Material and labour for preparation of new or previously untreated steel surface over 10 cm width or girth and applying two coats of synthentic enamel paint over a coat of red oxide primer complete all as specified and directed.

JESWIN BUILDERS