Development of new A site RO at location On NH18 Old NH32 from Balarampur College up to West Bengal to Jharkhand Border Dist Purulia under Durgapur DO of WBSO

Subject: Development of New A site Retail Outlet at location - On NH18 (OLD-NH32) from Balarampur College up to West Bengal - Jharkhand Border, Dist.:-Purulia under Durgapur DO of WBSO.

Tender Ref. No.: MAC/ERO/37/2025-26/LT-244

e-Tender ID: 2026_ERO_189054_1

Bidder/Firm/Company Name:

Type of Firm (Please Select)

Name of DSC User (Authorized Signatory) for the subject Tender

Father's Name of DSC User for the subject Tender

Select Tender type based on "Value" & "EMD / BSD" Criteria to show / hide relevant Annexure 100 Lakhs & More with BSD

ANNEXURE – A ACCEPTANCE OF ALL TERMS & CONDITIONS OF TENDERER 0

We confirm that we have quoted the rates in the tender considering Inter-alia the 1. Tender Document(s) 2. Additional Document(s) (if any) 3. BOQ Document (Price Bid Format) 4. Corrigendum (if any) 5. Pre Bid Meeting Minutes (if any)

We ………………………………………………………………………………………………………………………… (Name of the Tenderer) hereby certify that we have fully read and thoroughly understood the tender requirements and accept all terms and conditions of the tender including all corrigendum/addendum issued, if any. Our offer is in confirmation to all the terms and conditions of the tender including all corrigendum/addendum, if any and minutes of the pre-bid meeting. In the event our offer is found acceptable, and contract is awarded to us, the complete tender document shall be considered for constitution of Contract Agreement.

ANNEXURE – B DECLARATION ON NCLT/NCLAT/DRT/DRAT/COURT RECEIVERSHIP/ LIQUIDATION 0

I(a) As on date, I/We am/ are not undergoing insolvency resolution process or liquidation or bankruptcy proceedings, and no application has been filed and is currently pending against me/us for initiation of insolvency resolution process, liquidation or bankruptcy proceedings whether under IBC or under any other applicable law (where IBC is not applicable).

I(b) As on date, I/We am/ are undergoing corporate insolvency resolution process (CIRP) / liquidation / bankruptcy proceedings, the details of which are attached, including copy of the relevant petition.

I(c) As on date, application for initiation of CIRP/ liquidation/ bankruptcy proceedings is currently pending against me/us, under IBC or other applicable law (where IBC is not applicable), the details of which are attached, including copy of the relevant petition.

I/We undertake to notify to IOCL immediately and no later than one (1) working day therefrom, in a written form along with copy of the relevant petition, once a petition for initiation of insolvency process (CIRP)/ liquidation/ bankruptcy proceedings is filed against us/me, and also upon admission or dismissal of such petition by the NCLT or any other competent authority and the appeal proceedings, if any.

II . I undertake to provide an updated declaration on proceedings under IBC before award of contract, as per timelines stipulated by Indian Oil Corporation Limited.

It is understood that if this declaration is found to be false or in case I/we fail to comply with the undertakings given, Indian Oil Corporation Limited shall have the right to reject my/our bid and forfeit the EMD, and if the bid has resulted in a contract, the contract will be liable for termination, without any liability on the part of Indian Oil Corporation Limited, and such termination would be without prejudice to any other right or remedy (including black listing or holiday listing) available to Indian Oil Corporation Limited.

ANNEXURE – C COMPLIANCE CERTIFICATE REGARDING BIDDERS FROM A COUNTRY WHICH SHARES A LAND BORDER WITH INDIA 0

(A) The bidder, ………………………………………………………………………………………………………………………… is not from a country which shares a land border with India;

The bidder, ………………………………………………………………………………………………………………………… is from a country, ………………………………………………………………………………………………………… (Name of the Country) which shares a land border with India and are registered with the Competent Authority. Certificate of registration is attached with the bid;

The bidder, ………………………………………………………………………………………………………………………… is from a country, ………………………………………………………………………………………………………… (Name of the Country) which shares a land border with India and Government of India has extended lines of credit or is engaged in developmental projects in this country, ………………………………………………………………………………………………………… (Name of the Country) and hence do not require any separate registration for participation in this tender.

(B) I have read the Clause regarding restrictions on procurement from a bidder of a country which shares a land border with India; I certify that this bidder is not from such a country or, if from such a country, has been registered with the Competent Authority. I hereby certify that this bidder fulfils all requirements in this regard and is eligible to be considered. (Where applicable, evidence of valid registration by the Competent Authority shall be attached).

(C) I have read the Clause regarding restrictions on procurement from a bidder of a country which shares a land border with India and on sub-contracting to contractors from such countries; I certify that this bidder is not from such a country or, if from such a country, has been registered with the Competent Authority and will not sub-contract any work to a contractor from such countries unless such contractor is registered with the Competent Authority. I hereby certify that this bidder fulfills all requirements in this regard and is eligible to be considered. [Where applicable, evidence of valid registration by the Competent Authority shall be attached].

ANNEXURE – D UNDERTAKING FOR BUSINESS TRANSACTION STATUS OF BIDDERS 0

I/We hereby declare that I/We/M/s.

(A) We hereby confirm that we have not transferred our ownership rights either in whole or in part to another entity or under process of transfer.

I/We have transferred my/our ownership rights in whole/part to other entity/ entities as per details below:

Sl. No. Name of Entity/Entities % of Ownership Transferred

I/We are in process of transferring my/ our ownership rights in whole/part to other entity/ entities as per details below:

Sl. No. Name of Entity/Entities % of Ownership Transferred

(B) I/We understand that Indian Oil Corporation Limited (IOCL) reserves the right to reject the tender of any entity, which has transferred its ownership rights in whole or in part or which is in process of transfer without assigning any reason for such rejection.

(C) I/ We also understand that refusal or failure to share the information regarding the status of any kind of business transfer process/restructuring etc. in this tender or at any later stage, as applicable, my/our tender is liable to be rejected by IOCL and without prejudice to any other remedy or action available with IOCL, IOCL shall forfeit the Earnest Money Deposit provided by the tenderer, in any form whatsoever.

ANNEXURE – E UNDERTAKING ON NO MULTIPLE BIDDING 0

I/ We, the authorized signatory of M/s. ………………………………………………………………………………………………………………………… participating in the subject Tender Ref. No. ……………………………………… for the job of …………………………………………………………………………………………………………………………………………………………………………………………………………………………………, do hereby declare:

I. have not submitted multiple bids. i.e., more than 1 bid either individually or in any combination of person (individual capacity, proprietor, affiliates, partnership, association of persons, Company, etc.)

II. understand that the submitted bids shall be construed as multiple bids in following scenarios:

a) A person shall be deemed to have submitted multiple bids if he submits more than one bid either individually or in any combination of person. A person shall for this purpose mean an individual, proprietor, any partner, association of persons, affiliate, company, etc.

b) A company shall for this purpose include any artificial person whether constituted under the laws of Indian or of any other country.

c) A person shall be deemed to have bid in a partnership format or in association of persons format if he is a partner of the firm which as submitted the bid or is a member of any association of persons which has submitted a bid.

d) A person shall be deemed to have bid in a Company format if, the person holds more than 10% (ten percent) of the voting share capital of the company which has submitted a bid or is a Director of the Company which has submitted a bid or holds more than 10% (ten percent) of voting share capital and/or is a Director of a holding Company which has submitted the bid.

III. am aware that, in case it is found that bidder has submitted more than one bids, all the bid shall be rejected and the Earnest Money Deposit (if applicable) for all such bids shall be forfeited, not by way of penalty or liquidated damages but by way of reimbursement of all pre-estimated costs likely to be incurred by the owner towards bidding process and in scrutiny and evaluation of bids.

Note: The submitted bids shall be considered as multiple bids as explained in "PART - B" of tender document.

ANNEXURE – F UNDERTAKING ON Public Procurement (Preference to Make in India (PP-MII) 0

UNDERTAKING ON Public Procurement (Preference to Make in India (PP-MII)

I ………………………………………………………………………………, son/daughter of ………………………………………………………………………………, do solemnly affirm and state as under:

(1). That I am the authorized signatory of M/s ……………………………………………………………………………… and I am duly authorized to furnish this undertaking declaration on behalf of M/s ………………………………………………………………………………

(2). That M/s ……………………………………………………………………………… has submitted its bid against bidding document of above Tender reference.

(3). That the Firm/Company is fully aware of the provisions of Public Procurement (Preference to Make in India) (PP-MII), Order 2017 and its amendments.

(4). We hereby confirm that our offer is achieving the minimum local content of:

Minimum 50% (>=50%)

Deemed Class-II Local Supplier (As per Clause 2A of PP-MII Order Revision Dated 19.07.2024. I confirm that we are manufacturing the tendered item under PLI Scheme and have received incentive from concerned PLI ministry. This declaration is being made within the specific time period only, as notified by concerned PLI Ministry)

(5). Details of location(s) where the local value addition is made

(6). I confirm that I am aware of the implication of the above undertaking and our liability on account of wrong declaration.

Note: 1. This undertaking shall be certified by the authorized signatory of the bidder. Authorised signatory shall mean a) The Proprietor in case of a proprietorship firm. b) Any one of the partners having POA in case of a partnership firm. c) Power of Attorney holder in case of a company.

2. Preference is applicable only for suppliers claiming minimum 50 % Local Content.

ANNEXURE – G BID SECURITY DECLARATION FROM BIDDERS IN LIEU OF EMD 0

I/ We, the authorized signatory of M/s. ………………………………………………………………………………………………………………………… participating in the subject Tender Ref. No. ……………………………………… for the job of …………………………………………………………………………………………………………………………………………………………………………………………………………………………………, do hereby declare that in the event:

I / We withdraw / modify our bid during the period of bid validity

I / We commit any other breach of tender conditions / contract which would have otherwise attracted forfeiture of EMD

I / We fail to / refuse to initiate the execution of the awarded Contract as per the terms of the Contract

then I / We could be debarred from being eligible for bidding / award of all future tender(s) of Indian Oil Corporation Limited for a period of SIX months from the date of communication of such debarment.

I/We agree that the above shall be without prejudice to the any other rights /remedies available to Indian Oil Corporation Limited under the Tender and/or law.

Annexure Name Description Submission Status

ANNEXURE – A ACCEPTANCE OF ALL TERMS & CONDITIONS OF TENDERER NOT Submitted 0

ANNEXURE – B DECLARATION ON NCLT/NCLAT/DRT/DRAT/COURT RECEIVERSHIP/ LIQUIDATION NOT Submitted 0

ANNEXURE – C CERTIFICATE FOR BIDDERS FROM A COUNTRY WHICH SHARES A LAND BORDER WITH INDIA NOT Submitted 0

ANNEXURE – D UNDERTAKING FOR BUSINESS TRANSACTION STATUS OF BIDDERS NOT Submitted 0

ANNEXURE – E UNDERTAKING ON NO MULTIPLE BIDDING NOT Submitted 0

ANNEXURE – F UNDERTAKING ON PUBLIC PROCUREMENT (PREFERENCE TO MAKE IN INDIA (PP-MII) NOT Submitted 0

ANNEXURE – G BID SECURITY DECLARATION FROM BIDDERS IN LIEU OF EMD NOT Submitted 0

Select, At Par, Excess (+), Less (-) IOCL Select Excess (+) Less (-) At Par Less (-)

Tender Inviting Authority: General Manager (Mats & Contracts), Eastern Region Office (Marketing Division)

Name of Work: Development of New A site Retail Outlet at location-On NH18 (OLD-NH32) from Balarampur College up to West Bengal-Jharkhand border, Dist-Purulia under Durgapur Divisional Office of West Bengal State Office

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 DEV. OF NRO- BALARAMPUR- P&M item code 1

2 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling & neatly dressing of disposed soil completely to be paid separately as per item no. MPLCN00600 item code 2

3 EXC. OVER AREAS IN ALL KINDS OF SOIL item code 3 65 M3 129.86 Excess(+) Full Conversion INR

4 EXC. OVER AREAS IN ORDINARY ROCK item code 4 6 M3 251.68 Excess(+) Full Conversion INR

5 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil & disposal of surplus excavated soil as directed, within or outside the site at an unobjectionable place. item code 5

6 EXC. IN ALL KINDS OF SOIL item code 6 42 M3 180.17 Excess(+) Full Conversion INR

7 EXC. IN ORDINARY ROCK item code 7 1 M3 320.02 Excess(+) Full Conversion INR

8 Excavating trenches of required width for pipes, cables etc including excavation for sockets & dressing of sides, ramming of bottoms,depth upto 1.5m including taking out excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing surplus excavated soil as directed, within or outside site at unobjectionable place in all kinds of soil item code 8

9 EXTRA DEPTH 1.5M< 3M UPTO 80MM DIA item code 9 80 MTR 202.23 Excess(+) Full Conversion INR

10 FILLING AVAILABLE EARTH item code 10 2 M3 156.85 Excess(+) Full Conversion INR

11 Supplying and filling in plinth with sand within specified grading zone of fine aggregates specified in table 3.1, clause 3.1.3 of attached specifications under floors, etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming including watering, consolidating and dressing complete. item code 11

12 SUPPLY FILLING LOCAL SAND ZONE IV item code 12 51.5 M3 1084.13 Excess(+) Full Conversion INR

13 Providing and laying in position cement concrete of specified grade excluding cost of centering & shuttering. All work up to plinth level: item code 13

14 1 CEMENT:2 COARSE SAND:4 AGG. 20MM item code 14 4.5 M3 4847.66 Excess(+) Full Conversion INR

15 1 CEMENT:3 COARSE SAND:6 AGG. 20MM item code 15 4.5 M3 4469.55 Excess(+) Full Conversion INR

16 Centering and shuttering including strutting, propping etc. and removal of form work for: item code 16

17 CENT.& SHUT.FOR PCC-FOUND,FOOTING ETC item code 17 13.75 M2 203.41 Excess(+) Full Conversion INR

18 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level item code 18

19 RCC 1:1½:3 UP TO PLINTH LEVEL W/O C&S item code 19 6.25 M3 5511.51 Excess(+) Full Conversion INR

20 Centering and shuttering including strutting, propping etc. and removal of form for : item code 20

21 CENT.& SHUTT. FOR RCC COLUMNS item code 21 51 M2 523.93 Excess(+) Full Conversion INR

22 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels item code 22

23 TMT BARS FE- 500 GRADE item code 23 570 KG 59.62 Excess(+) Full Conversion INR

24 Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth item code 24

25 BRICK WORK IN CM 1:6 IN FOUNDN & PLINTH item code 25 45 M3 4396.97 Excess(+) Full Conversion INR

26 Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, sills, facias, Pump Island & similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding & polishing to edge to give high gloss finish etc. complete at all levels. item code 26

27 POLISHED GRANITE - KITCH.CUNTR<0.50SM item code 27 13 M2 3011.57 Excess(+) Full Conversion INR

28 POLISHED GRANITE - KITCH.CUNTR>0.50SM item code 28 17 M2 2861.82 Excess(+) Full Conversion INR

29 Extra for providing edge moulding to 18mm Granite/ marble stone counters,Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in- Charge. item code 29

30 EXTRA FOR EDGE MOULDING TO GRANITE WORK item code 30 36 MTR 268.67 Excess(+) Full Conversion INR

31 EXTRA FOR OPENING FOR WASH BASIN ETC. item code 31 2 EA 524.53 Excess(+) Full Conversion INR

32 Structural steel work riveted, bolted or item code 32 300 KG 61.45 Excess(+) Full Conversion INR

33 STR.STEEL IN BUILT UP SECTION item code 33 50 KG 72.66 Excess(+) Full Conversion INR

34 Steel work in built up tubular (round,square or rectangular hollow tubes etc) trusses etc. including cutting,hoisting fixing in position and applying a priming coat of approved steel primer, including welded and bolted with special shaped washers etc. complete. item code 34

35 HOT FINISHED WELDED TYPE TUBULAR TRUSS item code 35 100 KG 102.43 Excess(+) Full Conversion INR

36 Providing and laying cement plaster on surfaces with fine sand including curing etc. item code 36

37 12MM CEMENT PLASTER,1:4 WITH FINE SAND item code 37 96 M2 190.55 Excess(+) Full Conversion INR

38 ACRYLIC SMOOTH EXTERIOR PAINT item code 38 100 M2 117.61 Excess(+) Full Conversion INR

39 DELUXE MULTISURFACE PAINT-STEEL SURFACE item code 39 60 M2 89.83 Excess(+) Full Conversion INR

40 SYNTHETIC ENAMEL PAINT item code 40 10 M2 126.5 Excess(+) Full Conversion INR

41 Providing and fixing B class G.I. pipes complete with G.I. fittings including trenching and refilling etc for WATER and AIR, External work item code 41

42 15 MM DIA. NOMINAL BORE item code 42 5 MTR 174.34 Excess(+) Full Conversion INR

43 20 MM DIA. NOMINAL BORE item code 43 20 MTR 202.66 Excess(+) Full Conversion INR

44 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : item code 44

45 15MM BRASS BALL VALVES-PLASTIC FLOAT item code 45 1 EA 241.86 Excess(+) Full Conversion INR

46 S/L OF 50 MM DIA SINGLE WALL FLEXIBLE PI item code 46 100 MTR 2378.81 Excess(+) Full Conversion INR

47 S/L OF 80 MM DIA SINGLE WALL FLEXIBLE PI item code 47 30 MTR 3307.5 Excess(+) Full Conversion INR

48 Installation of supplied 20 KL Tank as per specified drawings as per work description but excluding all works of kerb wall and Gasket for manhole including painting / doping with Shalimastic HD as applicable as per specifications complete. RCC works wherever mentioned shall be of grade M20 item code 48

49 20KL TANK IN B.M. PIT, RCC STRIPRAFT U/D item code 49 3 LS 391236.82 Excess(+) Full Conversion INR

50 Supply, fabrication, laying and testing of MS, BLACK, ERW, threaded pipes, heavy class conforming to IS 1239, PART I as per IOCL specifications including pipeline fittings like bends, tee etc as required and as directed for Underground pipeline with doping item code 50

51 S/L U/G MS THREADED 50 MM DIA PIPE item code 51 9 MTR 603.74 Excess(+) Full Conversion INR

52 Supply, fabrication, laying and testing of MS, BLACK, ERW, threaded pipes, heavy class conforming to IS 1239, PART I as per IOCL Specifications including pipeline fittings like bends, tee etc as required and as directed for Above Ground pipeline including surface preparation according to standard SSPC ST2 and painting with 2 coats of red oxide zinc phosphate primer and 2 coats of Synthetic enamel / aluminium finish paint as per IOCL specifications item code 52

53 S/L A/G MS THREADED 50 MM DIA PIPE item code 53 12 MTR 356.75 Excess(+) Full Conversion INR

54 Supply, fabrication, laying and testing of MS black, ERW welded, pipes, heavy class conforming to IS 1239, PART I as per IOCL specifications including pipeline fittings like bends, tee etc as required and as directed for Underground pipeline with doping item code 54

55 S/L U/G MS WELDED 80 MM DIA PIPE item code 55 2 MTR 1000.54 Excess(+) Full Conversion INR

56 S/L U/G MS WELDED 50 MM DIA PIPE item code 56 5 MTR 648.6 Excess(+) Full Conversion INR

57 Fabrication, Installation, Welding & testing of Corporation supplied MS or GI pipes for Underground pipeline with doping. Pipeline fittings 80 mm dia and below is to be supplied by party. item code 57

58 LAYING SUPPLIED 50 MM DIA U/G PIPE item code 58 5 MTR 199.35 Excess(+) Full Conversion INR

59 Supply & welding slip-on flanges conforming to IS2062 GrA, ANSI B16.5, Class#150 with 3 runs of weld outside and one run of weld inside the flanges as per specifications and standard Drg.enclosed herein item code 59

60 S/W SLIPON FLANGES OF 100 MM DIA. item code 60 3 EA 779.01 Excess(+) Full Conversion INR

61 S/W SLIPON FLANGES OF 50 MM DIA. item code 61 2 EA 532.04 Excess(+) Full Conversion INR

62 Making flanged joints between flanges slip on, blind and flange etc. including providing/supplying 3 mm thick permanite oil gasket, nuts, bolts, bonding with 3 mm dia copper wire etc.complete as per IOCL specifications. item code 62

63 MAKING SLIPON / BLIND FLANGE JOINT 50MM item code 63 2 EA 344.74 Excess(+) Full Conversion INR

64 Supplying and installation of the following threaded coupling item code 64

65 80 MM DIA AL. CAMLOCK COUPLING - MALE item code 65 3 EA 682.14 Excess(+) Full Conversion INR

66 Supply and installation of ‘U’ type CS bend on the vent pipes including painting as per specifications and supplying and brazing wire mesh of 11 mesh per linear centi-meter of non-corrosive metal in two layers on both ends. item code 66

67 S/I U TYPE 50MM CS BEND ON VENT PIPES item code 67 3 EA 626.42 Excess(+) Full Conversion INR

68 Providing stainless steel wire mesh 32 SWG, 11 mesh per linear cm of of non corrosive metal in two layers on existing vent hoods ‘U’ type (on both ends) including brazing, etc. complete item code 68

69 P/F SS WIRE MESH 32SWG ON 50MM V. HOODS item code 69 2 EA 161.4 Excess(+) Full Conversion INR

70 Supply and installation of screwed type gun metal valves as per IOC specifications: Ball Valve item code 70

71 S/I SCREWED GM BALL VALVE 80MM DIA item code 71 3 EA 6560.93 Excess(+) Full Conversion INR

72 S/I SCREWED GM BALL VALVE 50MM DIA item code 72 4 EA 2668.66 Excess(+) Full Conversion INR

73 Installation of supplied Multi Product Pumps / Dispensers on pump island as per manufacturers installation manual, drawings, including supplying, providing necessary frame of ISMC 100, foundation bolts, supplying and filling required quantity of dry sand in pit(s) below the pump item code 73

74 2 PRODUCT - 4 NOZZLE MPP/MPD item code 74 2 EA 9283.54 Excess(+) Full Conversion INR

75 Air compressor Supply and installation of horizontal air compressor assembly with delivery pressure of 12 kg/sq cm equipped with pressure gauge, non- return/safety/drain/delivery valves, automatic cut-off switch and suitable electrical connections & all standard accessories, including civil works: item code 75

76 S/I OF 3 HP (160-220 LITRES) COMPRESSOR item code 76 1 EA 34315.77 Excess(+) Full Conversion INR

77 S/I DIGITAL TYRE INFLATOR item code 77 1 EA 41801.26 Excess(+) Full Conversion INR

78 Transportation of equipment from one location to another location including enroute all taxes, levies and unloading/loading by a suitable vehicle exclusively for this purpose (In case of tank same shall be loaded by the tank fabrication contractor) item code 78

79 TRANSPTN OF 15/20 KL TANK : 0 - 30 KM item code 79 3 LS 6148.64 Excess(+) Full Conversion INR

80 TPT/KM OF 15/20KL TANK: EXTRA > 30KM item code 80 510 KM 47.3 Excess(+) Full Conversion INR

81 T-MONO/DUO/AIRCOMP/STP/PUMPS:3-6, <30KM item code 81 1 LS 5312.42 Excess(+) Full Conversion INR

82 T/KM-MONO/DUO/AIRCOMP/STP/PUMPS:3-6, >30 item code 82 170 KM 33.11 Excess(+) Full Conversion INR

83 Loading/unloading charges for 10/15/20/ 50/70 KL tanks. item code 83

84 LOADING, UNLOADING 15 /20 KL TANK item code 84 3 LS 2837.83 Excess(+) Full Conversion INR

85 S & F FRESH WATER IN U/G TANK item code 85 60 KL 487.93 Excess(+) Full Conversion INR

86 REMOVING WATER FROM U/G TANK item code 86 3 LS 916.15 Excess(+) Full Conversion INR

87 S/F 2" PV VALVES item code 87 1 EA 4871.14 Excess(+) Full Conversion INR

88 INSTALLATION OF STP item code 88 3 EA 1238.2 Excess(+) Full Conversion INR

89 CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items item code 89

90 S&L 3X2.5 SQMM,1.1KV FRLS CU ARMD CABLE item code 90 650 MTR 108.91 Excess(+) Full Conversion INR

91 S&L 4X2.5 SQMM,1.1KV FRLS CU ARMD CABLE item code 91 60 MTR 126.46 Excess(+) Full Conversion INR

92 Re-laying corporation supplied cable complete as per specification item code 92

93 RELAYNG IOC SUPPLD 1.5-10SQMM XLPE CABLE item code 93 5 MTR 28.1 Excess(+) Full Conversion INR

94 RELA. IOC SUP. 4 -10SQMM XLPE/AYFY CABLE item code 94 5 MTR 28.1 Excess(+) Full Conversion INR

95 RELA. IOC SUP.16 -35SQMM XLPE/AYFY CABLE item code 95 5 MTR 38.66 Excess(+) Full Conversion INR

96 RELA. IOC SUP.50 -70SQMM XLPE/AYFY CABLE item code 96 5 MTR 38.66 Excess(+) Full Conversion INR

97 RELA. IOC SUP.120SQMM XLPE/AYFY CABLE item code 97 5 MTR 38.66 Excess(+) Full Conversion INR

98 SUPPLY AND LAYING OF FLAT CABLES item code 98

99 S&L 3X2.5SQMM CU FLAT CABLE -SUBM PUMP item code 99 5 MTR 113.06 Excess(+) Full Conversion INR

100 S&L 3X4SQMM CU FLAT CABLE -SUBM PUMP item code 100 5 MTR 138.56 Excess(+) Full Conversion INR

101 CABLE TERMINATION GLANDS NON-FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination (NON FLP): Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP heavy duty Double Compresson cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification and direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used. item code 101

102 CABLE TERM,NON FLP DC GLAND 3X2.5SQMM item code 102 10 EA 257.41 Excess(+) Full Conversion INR

103 CABLE TERM,NON FLP DC GLAND 4X2.5SQMM item code 103 8 EA 257.41 Excess(+) Full Conversion INR

104 CABLE JOINTING Cable Jointing : Providing straight through joint of following 1.1 KV grade XLPE insulated armoured cable with M-Seal make jointing kit, and other jointing material, etc. all complete including supply of all materials as per specification & direction of Engineer In-charge. item code 104

105 CABLE JOINTING KIT FOR 3X2.5SQMM item code 105 11 EA 1151.22 Excess(+) Full Conversion INR

106 CABLE JOINTING KIT FOR 4X2.5SQMM item code 106 1 EA 1310.59 Excess(+) Full Conversion INR

107 CABLE JOINTING KIT FOR 3.5X25SQMM item code 107 1 EA 1151.22 Excess(+) Full Conversion INR

108 CABLE JOINTING KIT FOR 3.5X35SQMM item code 108 1 EA 1380.26 Excess(+) Full Conversion INR

109 CABLE JOINTING KIT FOR 3.5X50SQMM item code 109 1 EA 1576.4 Excess(+) Full Conversion INR

110 CABLE JOINTING KIT FOR 3.5X70SQMM item code 110 1 EA 1682.9 Excess(+) Full Conversion INR

111 CABLE ROUTE MARKER WITH 100X100X5MM item code 111 10 EA 284.91 Excess(+) Full Conversion INR

112 Supply & laying of Automation Signal cable-Stranded (Class2) Annealed Bare Copper Conductor, Extruded PVC type C Insulated, 2 Cores Twisted to form a pair, each shielded with Aluminium backed Mylar Tape along withATC Drain Wire,multipairs laid up &Overall Shielded with Aluminium backed Mylar Tape along with ATC (Annealed Tinned Copper) Drain Wire and Extruded PVC Type ST-2 Inner Sheathed, Galvanised Steel Round Wire Armoured and Overall Extruded FRLS PVC Type ST-2 Outer Sheathed Instrumentation/Signal Cables conforming to BS 5308-2 & IS 1554-1 item code 112

113 AUTOMATION SIGNAL CABLE - 4PX0.5SQM item code 113 200 MTR 144.02 Excess(+) Full Conversion INR

114 CHEMICAL EARTHING - CU BONDED ROD item code 114 2 EA 13601.5 Excess(+) Full Conversion INR

115 Supply & drawing/laying, jointing, connecting, testing and commissioning of earth strip/copper strip/GI wire for earthing and lightning protection under or aboveground complete as per specification for the following : item code 115

116 EARTHING WITH 50 X 10MM G.I. STRIP item code 116 120 MTR 290.19 Excess(+) Full Conversion INR

117 EARTHING WITH 32 X 6 MM G.I.STRIP item code 117 100 MTR 110.86 Excess(+) Full Conversion INR

118 EARTHING WITH 25 X 3 MM GI STRIP item code 118 320 MTR 55.16 Excess(+) Full Conversion INR

119 16SQMM CUCABLE INCL.CROCDILCLIPIN LT PNL item code 119 1 EA 1201.77 Excess(+) Full Conversion INR

120 Supplying & Fixing of following items for electrical safety in switch rooms/DG rooms etc item code 120

121 S&F RUBBER MAT 33KV GRADE (2MX1M SIZE) item code 121 3 M2 2687.03 Excess(+) Full Conversion INR

122 S&F 6MM THICK CHEQUERED PLATE item code 122 3 M2 2680.73 Excess(+) Full Conversion INR

123 S&F SHOCK TREATMENT CHART item code 123 1 EA 184.96 Excess(+) Full Conversion INR

124 S&F 11 KV GRADE HAND GLOVES, ISI MARK item code 124 1 EA 432.06 Excess(+) Full Conversion INR

125 PANEL BOARDS AND DISTRIBUTION BOARDS Supply, installation, testing and commissioning of cubicle type power and motor control centre panel fabricated out of 14 SWG sheet steel undergone 7 tank process,dust & vermin proof, floor mounting type, suitable for indoor use having cable entry from the bottom and having following specific components complete, control wiring etc. as per enclosed standard drawing. Any other components/hardware required to complete the panels but not mentioned here shall also be provided. Note: Both incomers should have mechanical interlock for proper & safe operation. The MCCB used for incomer feeder shall have short circuit, overload and earthfault protection and also shunt coil for ESD operation. The Bus Bar support shall be DMC/ SMC/Epoxy moulded. All equipment/components shall be mounted logically to have free access for maintenance, tightening of connections & visual inspection. All the metering equipment shall be Digital & mounted on the panel and size of meter shall be 96 mm x 96 mm. The Bus Bar shall be provided with heat shrunk PVC sleeves & all power terminals shall be stud type with properly shrouding to avoid accidental contact. Neoprene type gasket shall be provided at the doorof the panel. The enclosure of the Panel shall have IP52 degree of protection. 2 Nos earth terminal shall be provided at the Panel frame with extension link for earthing connections. Painting:The under surface shall be prepared by applying a coat of phosphate paint and coat of yellow zinc chromate primer. The under surface shall be made free from all imperfections before undertaking the finishing coat. After preparation of the under surface, the switchboard shall be spray painted with two coats of epoxy based final paint or shall be powder coated. Colour shade of final paint shall be RAL 7032. item code 125

126 PANEL & DISTRIB. BOARDS - MEDIUM RO item code 126 1 EA 171857.32 Excess(+) Full Conversion INR

127 Supplying and fixing of following MCBs with necessery inter connections on existing DB, Panel board etc. item code 127

128 S&F MCB+ELCB UPTO 32A DP MCB item code 128 18 EA 413.61 Excess(+) Full Conversion INR

129 Supply and installation of MCB distribution board having Double door complete with tinned cu bus bar, neutral bus bar, earth bar, din bar, interconnection, earthing etc. without incoming isolator and MCBs item code 129

130 S&F MCB DB WITH 4 WAY (4+12) TPN item code 130 1 EA 2282.27 Excess(+) Full Conversion INR

131 S & I OF ESD SYSTEM item code 131 1 EA 14730.06 Excess(+) Full Conversion INR

132 Supplying and fixing 12 volt Charged LA battery of approved make for Electronic dispensing pumps including giving necessery electrical connection for the following AH ratings. item code 132

133 12V , 7AH CHARGED LA BATTERY WITH STAND item code 133 2 EA 762.06 Excess(+) Full Conversion INR

134 CONSTANT VOLTAGE TRANSFORMER Supplying, installation, testing and commissioning of single phase, air cooled constant voltage transformer of approved make having input voltage range of 180-260V and output voltage of 220/230V with sine wave output wave form and having automatic current limiting and short circuit protection including all accessories complete (for displays) for the following VA ratings. item code 134

135 S/I SINGLE PAHSE AIRCOOLED 500VA CVT item code 135 2 EA 4590.9 Excess(+) Full Conversion INR

136 SINGLE SERVO VOLTAGE STABILISER Supply and fixing of 230V, Single phase, AC Servo voltage stabilizer of approved makes,(Range - 180 - 250 minimum) shall be provided for Individual dispensing pump as per IE Regulation and as per specification item code 136

137 S/I SINGLE PHASE SERVO STABILISER-5 KVA item code 137 3 EA 11059.03 Excess(+) Full Conversion INR

138 Supply, fitting, fixing of arm bracket, tubular type, 38mm/50mm dia on pole including painting, all complete. item code 138

139 S&E ARM " Y BRACKET 38/50MM DIA. ON POLE item code 139 4 EA 1332.35 Excess(+) Full Conversion INR

140 Supplying & drawing inside the poles 3 core 2.5 sq.mm PVC insulated flexible copper conductor, fixing of junction box at the pole base (excluding supply of JB), making all connections on both ends, all complete as per specification and direction of Engineer In-charge. item code 140

141 S&D 3CX2.5SQMM PVC CU WIRE IN L POLE item code 141 15 EA 833.47 Excess(+) Full Conversion INR

142 OCTAGONAL POLES Supply & Fixing of Octagonal Poles of following type (Civil job shall be paid separatly) : item code 142

143 S&E 7M HIGH GALVANISED OCTAGONAL POLE item code 143 15 EA 8557.36 Excess(+) Full Conversion INR

144 YARD LIGHTS: 100W WITH IP66 PROTECTION item code 144 19 EA 5624.58 Excess(+) Full Conversion INR

145 DISMANTLING Dismantling of following electrical fittings / fixtures with all leads and lifts. item code 145

146 DISMENTLING ELE CABLE OF ALL SIZE AG/UG item code 146 5 MTR 20.7 Excess(+) Full Conversion INR

147 PANEL BOARD STICKERING WORK item code 147 1 LS 1233.84 Excess(+) Full Conversion INR

148 PANEL BOARD MARKING item code 148 1 LS 6991.76 Excess(+) Full Conversion INR

149 PREPARATION OF SLD - ELECTRICAL LAYOUT item code 149 1 LS 8636.88 Excess(+) Full Conversion INR

150 PREPARATION OF SLD - EARTHING LAYOUT item code 150 1 LS 8636.88 Excess(+) Full Conversion INR

151 Supply and Installation of 16 SWG MS/GI powder coated weather proof Earthing Box of following size with door and locking arrangement with lock and key. Box to be mounted on ISA 40x40x5 (Painted with black synthetic enamel paint) frame having 2 legs of length 800 mm (500 mm above ground and 300 mm below ground which is to be grouted with PCC 1:2:4). Bottom of box should have opening for incoming earth GI strips all complete, as per specification and direction of Engineer-in-charge. Note: EARTHING BOX in RED should be boldly written over the box. The box should have a hood at the top extending outwards such that no water should seep through inside the box during rainy season to avoid rusting. item code 151

152 Supply and Installation of 16 SWG MS/GI powder coated weather proof Earthing Box item code 152 1 EA 2474.76 Excess(+) Full Conversion INR

153 Earthing Pit Tag item code 153 2 EA 1489.6 Excess(+) Full Conversion INR

154 Designing, fabricating, testing, installing Aluminium Composite Panel Claddin item code 154 8.5 M2 1989.38 Excess(+) Full Conversion INR

155 DEV. OF NRO- BALARAMPUR- NON-P&M item code 155

156 SURFACE EXCAVATION item code 156 1350 M2 66.1 Excess(+) Full Conversion INR

157 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling & neatly dressing of disposed soil completely to be paid separately as per item no. MPLCN00600 item code 157

158 EXC. OVER AREAS IN ALL KINDS OF SOIL item code 158 243 M3 129.86 Excess(+) Full Conversion INR

159 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil & disposal of surplus excavated soil as directed, within or outside the site at an unobjectionable place. item code 159

160 EXC. IN ALL KINDS OF SOIL item code 160 99.5 M3 180.17 Excess(+) Full Conversion INR

161 EXC. IN ORDINARY ROCK item code 161 2 M3 320.02 Excess(+) Full Conversion INR

162 EXC.EXTRA LIFT EVERY 1.5M ALL KIND SOIL item code 162 56 M3 64.55 Excess(+) Full Conversion INR

163 EXC. - EXTRA LIFT EVERY 1.5M HARD ROCK item code 163 1 M3 115.75 Excess(+) Full Conversion INR

164 FILLING AVAILABLE EARTH item code 164 53.5 M3 156.85 Excess(+) Full Conversion INR

165 SUPPLY AND FILLING IMPORTED EARTH item code 165 10 M3 502.39 Excess(+) Full Conversion INR

166 Supplying and filling in plinth with sand within specified grading zone of fine aggregates specified in table 3.1, clause 3.1.3 of attached specifications under floors, etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming including watering, consolidating and dressing complete. item code 166

167 SUPPLY FILLING LOCAL SAND ZONE IV item code 167 56.5 M3 1084.13 Excess(+) Full Conversion INR

168 Providing and laying in position cement concrete of specified grade excluding cost of centering & shuttering. All work up to plinth level: item code 168

169 1 CEMENT:2 COARSE SAND:4 AGG. 20MM item code 169 11.5 M3 4847.66 Excess(+) Full Conversion INR

170 1 CEMENT:3 COARSE SAND:6 AGG. 20MM item code 170 21.5 M3 4469.55 Excess(+) Full Conversion INR

171 Centering and shuttering including strutting, propping etc. and removal of form work for: item code 171

172 CENT.& SHUT.FOR PCC-FOUND,FOOTING ETC item code 172 73.5 M2 203.41 Excess(+) Full Conversion INR

173 CENT.& SHUT. FOR PCC IN WALL,ETC. item code 173 15 M2 435.1 Excess(+) Full Conversion INR

174 PRE-CAST CC 1:2:4 KERB STONE,..WITH C&S item code 174 10 M3 5379.84 Excess(+) Full Conversion INR

175 40MM DAMP PROOF COURSE item code 175 11 M2 337.32 Excess(+) Full Conversion INR

176 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level item code 176

177 RCC 1:1½:3 UP TO PLINTH LEVEL W/O C&S item code 177 71.35 M3 5511.51 Excess(+) Full Conversion INR

178 Providing & Laying Reinforced cement concrete work in walls (Any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level UP TO FLOOR V LEVEL excluding cost of centering, shuttering, finishing and reinforcement : item code 178

179 RCC 1:1½:3 WALLS ..UPTO 5 LVL W/O C&S item code 179 16 M3 6645.31 Excess(+) Full Conversion INR

180 Centering and shuttering including strutting, propping etc. and removal of form for : item code 180

181 CENT.& SHUTT. FOR RCC FOUNDN,FOOTING item code 181 379.5 M2 203.41 Excess(+) Full Conversion INR

182 CENT.& SHUTT. FOR RCC WALLS ETC. item code 182 38 M2 435.1 Excess(+) Full Conversion INR

183 CENT.& SHUTT. FOR RCC SLABS, ROOFS item code 183 66 M2 494.9 Excess(+) Full Conversion INR

184 CENT.& SHUTT. FOR RCCLINTELS, BEAMS item code 184 100 M2 394.21 Excess(+) Full Conversion INR

185 CENT.& SHUTT. FOR RCC COLUMNS item code 185 56 M2 523.93 Excess(+) Full Conversion INR

186 CENT.& SHUTT. FOR RCC FINS item code 186 40 M2 730.9 Excess(+) Full Conversion INR

187 CENT.& SHUTT. WITH PLY FOR RCC BEAMS item code 187 75 M2 458.16 Excess(+) Full Conversion INR

188 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels item code 188

189 TMT BARS FE- 500 GRADE item code 189 7300 KG 59.62 Excess(+) Full Conversion INR

190 Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth item code 190

191 BRICK WORK IN CM 1:6 IN FOUNDN & PLINTH item code 191 29.5 M3 4396.97 Excess(+) Full Conversion INR

192 BRICKWORK IN CM 1:6 IN S/STR UPTO LVL V item code 192 10 M3 5420.26 Excess(+) Full Conversion INR

193 HALFBRICK MAS IN CM1:4 S/STR UPTO LVL V item code 193 60 M2 665.6 Excess(+) Full Conversion INR

194 DRY BRICK ON EDGE FLOOR IN MUD MORTAR item code 194 130 M2 486.19 Excess(+) Full Conversion INR

195 Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, sills, facias, Pump Island & similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding & polishing to edge to give high gloss finish etc. complete at all levels. item code 195

196 POLISHED GRANITE - KITCH.CUNTR<0.50SM item code 196 2.5 M2 3011.57 Excess(+) Full Conversion INR

197 Extra for providing edge moulding to 18mm Granite/ marble stone counters,Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in- Charge. item code 197

198 EXTRA FOR EDGE MOULDING TO GRANITE WORK item code 198 18 MTR 268.67 Excess(+) Full Conversion INR

199 EXTRA FOR OPENING FOR WASH BASIN ETC. item code 199 2 EA 524.53 Excess(+) Full Conversion INR

200 MS GRILLS TO WINDOWS item code 200 100 KG 118.04 Excess(+) Full Conversion INR

201 CHROME PLATED FLOOR DOOR STOPPER item code 201 8 EA 166.02 Excess(+) Full Conversion INR

202 AL. HYDRAULIC DOOR CLOSER item code 202 3 EA 608.12 Excess(+) Full Conversion INR

203 100X72MM CHROME PLATED MORTISE LOCK item code 203 2 EA 575.87 Excess(+) Full Conversion INR

204 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions,at top, bottom & sides with with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screws including fixing all complete as per drawing & the directions of Engineer-in-charge. (Cost of glazing or panels to be paid for separately) item code 204

205 POWDER COATED AL.SECN,FIXED GLAZING item code 205 100 KG 325.84 Excess(+) Full Conversion INR

206 POWDER COATED AL.SECN, SHUTTERS item code 206 100 KG 390.14 Excess(+) Full Conversion INR

207 Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass/stainless steel screws etc. complete as per directions of Engineer in charge item code 207

208 PRE-LAM BOTH SIDE DECO.BOARD IN AL.SEC. item code 208 5 M2 747.58 Excess(+) Full Conversion INR

209 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): item code 209

210 FLOAT GLASS 6.0MM IN AL.SEC. item code 210 6 M2 925.74 Excess(+) Full Conversion INR

211 FLOAT GLASS 8.0MM IN AL.SEC. item code 211 15 M2 1044.25 Excess(+) Full Conversion INR

212 Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. item code 212

213 DBL ACTION FL.SPRING- BRASS COVER PLATE item code 213 1 EA 1837.38 Excess(+) Full Conversion INR

214 100MM BRASS LOCKS OF APPD.MAKE item code 214 3 EA 327.45 Excess(+) Full Conversion INR

215 Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in- charge item code 215

216 POWDER COATED AL.ROUND SHAPE HANDLE item code 216 8 EA 59.7 Excess(+) Full Conversion INR

217 P/FIXING 12MM FRAMELESS TOUGHENED GLASS item code 217 3.5 M2 3176.2 Excess(+) Full Conversion INR

218 STRUCTURAL STEEL WORK IN SINGLE SECTION item code 218 310 KG 61.45 Excess(+) Full Conversion INR

219 STR.STEEL IN BUILT UP SECTION item code 219 810 KG 72.66 Excess(+) Full Conversion INR

220 ROLLING SHUTTERS item code 220 7 M2 2102.35 Excess(+) Full Conversion INR

221 Steel work in built up tubular (round,square or rectangular hollow tubes etc) trusses etc. including cutting,hoisting fixing in position and applying a priming coat of approved steel primer, including welded and bolted with special shaped washers etc. complete. item code 221

222 HOT FINISHED WELDED TYPE TUBULAR TRUSS item code 222 1600 KG 102.43 Excess(+) Full Conversion INR

223 MS 16MM DIA FAN CLAMPS item code 223 4 EA 122.22 Excess(+) Full Conversion INR

224 MS GRATINGS,FRAMES,LADDER ETC. item code 224 1500 KG 93.55 Excess(+) Full Conversion INR

225 CERAMIC GLAZED TILES FOR WALLS item code 225 30 M2 735.72 Excess(+) Full Conversion INR

226 CERAMIC GLAZED TILES FOR FLOORING item code 226 10 M2 661.89 Excess(+) Full Conversion INR

227 Providing & laying vitrified floor tile in different sizes (thickness as per manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar as specified with coarse sand jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc. complete for flooring/skirting as specified item code 227

228 60X60 CM VITRIFIED FLOOR TILES item code 228 70 M2 1071.53 Excess(+) Full Conversion INR

229 60X60 CM VITRIFIED TILES FOR SKIRTING item code 229 10 M2 1103.87 Excess(+) Full Conversion INR

230 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, Single socketed pipes. item code 230

231 110MM PVC RAIN WATER PIPE item code 231 20 MTR 217.83 Excess(+) Full Conversion INR

232 Providing & fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. item code 232

233 110MM UPVC COUPLER item code 233 2 EA 84.12 Excess(+) Full Conversion INR

234 110MM UPVC SINGLE PUSHFIT COUPLER item code 234 5 EA 77.45 Excess(+) Full Conversion INR

235 UPVC SINGLE T WITH DOOR 110X110X110MM item code 235 6 EA 145.18 Excess(+) Full Conversion INR

236 UPVC SINGLE T WITHOUT DOOR - 110MM.. item code 236 1 EA 134.65 Excess(+) Full Conversion INR

237 UPVC 87.5 DEGREE BEND OF 110MM item code 237 12 EA 92.73 Excess(+) Full Conversion INR

238 UPVC PLAIN SHOE OF 110MM item code 238 1 EA 81.26 Excess(+) Full Conversion INR

239 Providing & fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work & fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. item code 239

240 110 MM UPVC PIPE CLIPS item code 240 30 EA 206.23 Excess(+) Full Conversion INR

241 Providing and laying cement plaster on surfaces with fine sand including curing etc. item code 241

242 12MM CEMENT PLASTER,1:6 WITH FINE SAND item code 242 395 M2 181.55 Excess(+) Full Conversion INR

243 20MM CEMENT PLASTER,1:6 WITH FINE SAND item code 243 10 M2 246.82 Excess(+) Full Conversion INR

244 Providing and laying 6mm thick cement plaster on surfaces with fine sand including curing etc. item code 244

245 6MM CEMENT PLASTER WITH FINE SAND item code 245 20 M2 162.35 Excess(+) Full Conversion INR

246 NEAT CEMENT PUNNING item code 246 50 M2 44.82 Excess(+) Full Conversion INR

247 2MM THK POP PUNNING OVER PLASTER item code 247 228 M2 140.46 Excess(+) Full Conversion INR

248 ACRYLIC SMOOTH EXTERIOR PAINT item code 248 378 M2 117.61 Excess(+) Full Conversion INR

249 DELUXE MULTI SURFACE PAINT SYSTEM item code 249 50 M2 101.54 Excess(+) Full Conversion INR

250 DELUXE MULTISURFACE PAINT-STEEL SURFACE item code 250 142 M2 89.83 Excess(+) Full Conversion INR

251 SYNTHETIC ENAMEL PAINT item code 251 280 M2 126.5 Excess(+) Full Conversion INR

252 Carriage charge for disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, stacking, unloading to approved municipal dumping ground/unobjectionable place as/direction of Engg- in-Charge beyond IOCL Premises for all leads and including all lifts item code 252

253 MALBA & WASTE CARRIAGE < 1 KM item code 253 10 M3 86.32 Excess(+) Full Conversion INR

254 MALBA & WASTE CARRIAGE > 1 km < 3 km item code 254 10 M3 110.22 Excess(+) Full Conversion INR

255 Construction of granular sub-base by providing close graded material conforming to specifications, mixing in a mechanical mixer plant at Optimum Moisture Content, carriage of mixed material by tippers to work site, for all lead and lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface & compacting with vibratory power roller to achieve the desired density, complete as per specification & direction of Engineer-in-charge. item code 255

256 GRANULAR SUB BASE -75MM TO 0.75MM item code 256 400 M3 1797.86 Excess(+) Full Conversion INR

257 WET MIX MACADAM item code 257 460 M3 1886.19 Excess(+) Full Conversion INR

258 Providing & laying factory made reflective type Lacquered finish Grey / coloured pre-cast cement concrete, interlocking paver block of specified grade made by block making machine wih vibratory compaction & of approved size and design / shape, shade and manufacturers and as per IOCL's specifications. The paver blocks shall have peripheral chamfer, with average crushing strength as per IS 15658, maximum water absorption of 2% after 10 minutes and 5% after 24 hrs. as per BS 1881, maximum dimensional deviations of +/- 2mm on length @ width and +/- 3 mm on thickness. The job includes supplying and laying a layer of 50 mm thick clean coarse sand on thoroughly compacted sub-base below the paver blocks, cutting the paver blocks wherever required with hydraulic splitter, filling in the joints at the edges of paver blocks with sand, compacting with machine vibrator to required line and level, etc. complete. (Payment for provision of edge restraints shall be made separately) item code 258

259 P/L REFLECTIVE LAQUERED M40 80MM THK PAV item code 259 950 M2 851.22 Excess(+) Full Conversion INR

260 100MM SCI GULLY TRAP item code 260 4 EA 31.85 Excess(+) Full Conversion INR

261 600X450 BEVELLED EDGE MIRROR item code 261 2 EA 916.21 Excess(+) Full Conversion INR

262 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall item code 262

263 CPVC PIPES 40MM INTRNAL EXPOSED ON WALL item code 263 20 MTR 463.16 Excess(+) Full Conversion INR

264 CPVC PIPES 50MM INTRNAL EXPOSED ON WALL item code 264 10 MTR 645.18 Excess(+) Full Conversion INR

265 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc. item code 265

266 CPVC PIPES 15MM CONCEALED item code 266 40 MTR 292.53 Excess(+) Full Conversion INR

267 CPVC PIPES 20MM CONCEALED item code 267 5 MTR 341.45 Excess(+) Full Conversion INR

268 CPVC PIPES 25MM CONCEALED item code 268 5 MTR 401.29 Excess(+) Full Conversion INR

269 CPVC PIPES 32MM CONCEALED item code 269 5 MTR 484.98 Excess(+) Full Conversion INR

270 Providing and fixing brass bib cock of approved quality : item code 270

271 15MM BRASS BIB COCK item code 271 2 EA 216.05 Excess(+) Full Conversion INR

272 20MM BRASS BIB COCK item code 272 2 EA 233.11 Excess(+) Full Conversion INR

273 Providing and fixing brass stop cock of approved quality : item code 273

274 15MM BRASS STOP COCK item code 274 2 EA 216.05 Excess(+) Full Conversion INR

275 20MM BRASS STOP COCK item code 275 2 EA 233.11 Excess(+) Full Conversion INR

276 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : item code 276

277 25MM GUN METAL VALVE WITH CI WHEEL item code 277 2 EA 355.01 Excess(+) Full Conversion INR

278 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : item code 278

279 150MM DIA CP BRASS SHOWER ROSE item code 279 2 EA 134.82 Excess(+) Full Conversion INR

280 PROVIDING POLYETHYLENE TANK ON TERRACE item code 280 1000 LTR 6.29 Excess(+) Full Conversion INR

281 15MM CP BRASS LONG BODY BIB COCK item code 281 3 EA 394.42 Excess(+) Full Conversion INR

282 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I.cover with frame of 300 x300 mm size(inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : item code 282

283 100X100MM GULLY TRAP WITH COMMON BRICKS item code 283 1 EA 1647.41 Excess(+) Full Conversion INR

284 SOAK PIT 2.5M DIA X 3M DEPTH item code 284 1 EA 18051.28 Excess(+) Full Conversion INR

285 WATER PROOFING WITH BRICK BAT COBA item code 285 1 M2 998.66 Excess(+) Full Conversion INR

286 Writing name of Retail Outlet and location/ Indian Oil Corporation monogram, other sign / slogans on building / glass of show window etc. of the following heights / diameters with vinyl sticker of approved quality and shade. 150 micron thick Non Reflective Vinyl sticker 3M or Equivalent Brand item code 286

287 LETTER SIZE 26-70CM item code 287 9 EA 458.14 Excess(+) Full Conversion INR

288 Providing and fixing CP Brass 32mm size item code 288 2 EA 765.04 Excess(+) Full Conversion INR

289 Providing and fixing Chrome Finish SS He item code 289 2 EA 1080.48 Excess(+) Full Conversion INR

290 Providing and fixing front operated conc item code 290 2 EA 5299.28 Excess(+) Full Conversion INR

291 Providing and fixing first quality (heav item code 291 2 EA 12923.84 Excess(+) Full Conversion INR

292 Providing and fixing H type double tone item code 292 2 EA 1936.6 Excess(+) Full Conversion INR

293 Providing and fixing stainless steel (SS item code 293 40 KG 340 Excess(+) Full Conversion INR

294 CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items item code 294

295 S&L 3X2.5 SQMM,1.1KV FRLS CU ARMD CABLE item code 295 245 MTR 108.91 Excess(+) Full Conversion INR

296 S&L 4X2.5 SQMM,1.1KV FRLS CU ARMD CABLE item code 296 15 MTR 126.46 Excess(+) Full Conversion INR

297 S&L 4X16 SQMM,1.1KV ALUMINIUM CABLE FRLS item code 297 5 MTR 128.3 Excess(+) Full Conversion INR

298 S&L3.5X35 SQMM,1.1KV ALUMNM CABLE FRLS item code 298 30 MTR 173.42 Excess(+) Full Conversion INR

299 CABLE TERMINATION GLANDS NON-FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination (NON FLP): Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP heavy duty Double Compresson cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification and direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used. item code 299

300 CABLE TERM,NON FLP DC GLAND 3X2.5SQMM item code 300 24 EA 257.41 Excess(+) Full Conversion INR

301 CABLE TERM,NON FLP DC GLAND 4X2.5SQMM item code 301 20 EA 257.41 Excess(+) Full Conversion INR

302 CABLE TERM,NON FLP DC GLAND 4X16SQMM item code 302 5 EA 337.62 Excess(+) Full Conversion INR

303 CABLE TERM,NON FLP DC GLAND 3.5X35SQMM item code 303 5 EA 337.62 Excess(+) Full Conversion INR

304 CABLE TERM,NON FLP DC GLAND 3.5X70SQMM item code 304 5 EA 493.04 Excess(+) Full Conversion INR

305 S&F OF FLP JUNC. BOX (4 WAY ENTRY) item code 305 4 EA 1093.76 Excess(+) Full Conversion INR

306 Supply & drawing/laying, jointing, connecting, testing and commissioning of earth strip/copper strip/GI wire for earthing and lightning protection under or aboveground complete as per specification for the following : item code 306

307 EARTHING WITH 25 X 3 MM GI STRIP item code 307 30 MTR 55.16 Excess(+) Full Conversion INR

308 PROVIDING INTERNAL WIRING item code 308

309 LIGHT/FAN/5A POINT, WIRING, MOD SWITCH item code 309 8 EA 582.47 Excess(+) Full Conversion INR

310 LIGHT/POWER PLUG, WIRING, MOD SWITCH item code 310 2 EA 838.37 Excess(+) Full Conversion INR

311 Supplying, drawing sub-main/power wiring with PVC insulated Copper 1100 V grade FRLS type through heavy duty rigid PVC conduit either on wall or in concealed. The job include terminations at both ends through proper jointing materials all complete for the following Make of Insulated wires shall be as per approved make item code 311

312 SUBMN WIRE-2X1.5SQMM,EARTHWIRE 1X1.5SQMM item code 312 50 MTR 108.61 Excess(+) Full Conversion INR

313 SUBMN WIRE-2X2.5SQMM,EARTHWIRE1X2.5SQMM item code 313 10 MTR 124.23 Excess(+) Full Conversion INR

314 SUBMN WIRE-2X4SQMM,EARTHWIRE 1X4SQMM item code 314 10 MTR 148.78 Excess(+) Full Conversion INR

315 SUBMN WIRE-2X16SQMM,EARTHWIRE 1X16SQMM item code 315 10 MTR 311.7 Excess(+) Full Conversion INR

316 SWITCHES, FUSES, MCBS, ELCBS ETC Supply and fixing of Modular switch frame with inner and outer face plates and accessories as per following details of approved including flush metal boxes/surface mounting boxes, plates, etc. all complete as per manufacturer's specification and direction of Engineer In-charge. item code 316

317 S&F SWITCH WITH 1 OR 2 MODULE FRAME item code 317 3 EA 180.77 Excess(+) Full Conversion INR

318 S&F SWITCH WITH 3 MODULE FRAME item code 318 3 EA 198.62 Excess(+) Full Conversion INR

319 S&F SWITCH WITH 4 MODULE FRAME item code 319 3 EA 213.5 Excess(+) Full Conversion INR

320 S&F SWITCH WITH 6 MODULE FRAME item code 320 4 EA 247.71 Excess(+) Full Conversion INR

321 S&F SWITCH WITH 8 MODULE FRAME item code 321 3 EA 284.91 Excess(+) Full Conversion INR

322 S&F SWITCH WITH 12 MODULE FRAME item code 322 3 EA 322.86 Excess(+) Full Conversion INR

323 S&F 6A MODULAR SWITCH item code 323 10 EA 207.26 Excess(+) Full Conversion INR

324 S&F 15 A MODULAR SWITCH item code 324 10 EA 240.36 Excess(+) Full Conversion INR

325 S&F 6A, 3 PIN MODULAR SOCKET item code 325 4 EA 237.06 Excess(+) Full Conversion INR

326 S&F 15 A 6 PIN MODULAR SOCKET item code 326 4 EA 271.1 Excess(+) Full Conversion INR

327 S&F FAN REGULATOR OF STEPPED MODULAR item code 327 3 EA 427.42 Excess(+) Full Conversion INR

328 Supplying and fixing of following MCBs with necessery inter connections on existing DB, Panel board etc. item code 328

329 S&F MCB+ELCB UPTO 32A SP MCB item code 329 10 EA 148.04 Excess(+) Full Conversion INR

330 S&F MCB+ELCB UPTO 32A DP MCB item code 330 16 EA 413.61 Excess(+) Full Conversion INR

331 Supply and installation of MCB distribution board having Double door complete with tinned cu bus bar, neutral bus bar, earth bar, din bar, interconnection, earthing etc. without incoming isolator and MCBs item code 331

332 S&F MCB DB WITH 4 WAY (4+12) TPN item code 332 2 EA 2282.27 Excess(+) Full Conversion INR

333 S & I OF ESD SYSTEM item code 333 1 EA 14730.06 Excess(+) Full Conversion INR

334 HOARDING LIGHTS:30W WITH IP65 PROTECTION item code 334 10 EA 1986.48 Excess(+) Full Conversion INR

335 LED TUBE LIGHT: 18W WITH IP65 PROTECTION item code 335 8 EA 426.06 Excess(+) Full Conversion INR

336 LED TUBE LIGHT: 8W WITH IP20 PROTECTION item code 336 20 EA 332.78 Excess(+) Full Conversion INR

337 CEILING FANS Supply & fixing of ceiling fan for inside of the sales building of following type: item code 337

338 S&I 1200 MM SWEEP CEILING item code 338 3 EA 1642.95 Excess(+) Full Conversion INR

339 EXHAUST FANS Supply and fixing of exhaust fan including electrical wiring all shall be with per specification and direction of site In charge. The fans shall be with louvers / shutters. (The job does not include making suitable cut out in the wall for fixing the fan). item code 339

340 S&I 9" LIGHT DUTY EXHAUST FAN KHAITAN/EQ item code 340 2 EA 1245.21 Excess(+) Full Conversion INR

341 Supply & laying of Heavy Duty type, High compression strength, IP 67 rated (DWC) Double wall corrugated HDPE Conduits as per IS:14930/ IS:16205. Laying includes with GI pull wires inside the conduits & necessary ends to be filled with sealants, of all complete and as per drawing & specification. item code 341

342 Supply & laying of Heavy Duty type Doubl item code 342 250 MTR 149.4 Excess(+) Full Conversion INR

343 Providing and fixing of 63 Amp ELCB 3 ph item code 343 1 EA 1202.64 Excess(+) Full Conversion INR

344 Providing and laying Bitumen Penetration Macadam with hard stone aggregate of quality, size and grading as specified, with bitumen of suitable penetration grade including required key aggregate as specified spreading coarse aggregate with the help of self propelled/ tipper tail mounted aggregate spreader and applying bitumen by a pressure distributor and then spreading key aggregate with the help of aggregate spreader complete, including consolidation with road roller of minimum 8 to 10 tonne capacity to achieve specified values of compaction and surface accuracy : item code 344

345 50MM BITUMINOUS PENETRATION MACADAM item code 345 1000 EA 278.6 Excess(+) Full Conversion INR

346 Providing and applying tack coat using hot straight run bitumen of grade VG-10 including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications : item code 346

347 TACK COAT ON WBM @0.75KG/SQM item code 347 1000 EA 30.02 Excess(+) Full Conversion INR

348 2.5 cm Premix carpet surfacing with 2.25 cum and 1.12 cum of stone chippings of 13.2mm and 11.2mm size respectively per 100 sqm. and 52 kg. and 56 kg. of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen, including consolidation with road roller of 6 to 9 tonne capacity etc. complete. (tack coat to be paid for separately) : item code 348

349 25MM PREMIX CARPET WITH VG-10 item code 349 1000 EA 148.35 Excess(+) Full Conversion INR

350 Providing and applying tack coat using hot straight run bitumen of grade VG-10 including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications : item code 350

351 TACK COAT ON BITUMINOUS SURFACE item code 351 1000 EA 24.02 Excess(+) Full Conversion INR

352 P/L PREMIX SEAL COAT item code 352 1000 EA 52.62 Excess(+) Full Conversion INR

353 COUNTER SUNK WASH BASIN item code 353 2 EA 6085.02 Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information