DEPOSIT-Calicut University - Establishment of Campus WiFi-Phase I-General Electronics Work

Amount

Campus WiFi

OD90758/2024-2025:SITC of 6U/500 MM depth Rack/Welded/Wall Mount, Glass Door/lSU/WallMount, , IT Rack mount power distribution unit, lPh, 230V, 50/60Hz, 1U standard with 6 X Indian Round Pin SA, Inlet Plug type 6A Indian Round Pin, 8A Fuse - POU Rating 1.8KVA/Side feed-1.5Mt/ Black, ITE /Server Rack Air module/90CFM, Hardware-Kit (Pack of 10). Preferred Make. Rittal/Netrack/ValRack

OD90760/2024-2025:Supply, laying, testing of 6 Core Single Mode Outdoor Loose Tube Armoured 9/125μm OS2 Type Optical, Low Water Peak Fiber Indoor/Outdoor Rated with Loose tube diameter : 1.8mm (Nominal),Outer Sheath : Anti Rodent, Anti Termite and UV HD Polyethylene - Black,Overall Cable Dimensions (Nominal) : 10.0 ± 1mm,Mass (Nominal) : 80 kg/km± 10%,Max. Tensile Strength-Short Term: 1500N,Min. Crush Resistance- : 2000N/10 cm,Optical Performance Max. Attenuation; At 1310 nm : 0.35dB/km At 1550 nm : 0.20dB/km,RoHS Compliant. Preferred Make : Molex/Belden/Panduit.

OD90761/2024-2025:SITC of 12 Port , 0S2, 1U Rack mount unit Fiber LIU with shelf made of metal with powder coated ,loaded with LC type (Aqua color), pigtail loaded, hinged splice tray and cable spool and other splicing I accessories. Preferred Make : Molex/Belden/Panduit.

OD90763/2024-2025:Supply, laying, testing of 12 Core Single Mode Outdoor Loose Tube Armoured 9/125μm OS2 Type Optical, Low Water Peak Fiber Indoor/Outdoor Rated with Loose tube diameter : 1.8mm (Nominal),Outer Sheath : Anti Rodent, Anti Termite and UV HD Polyethylene - Black,Overall Cable Dimensions (Nominal) : 10.0 ± 1mm,Mass (Nominal) : 80 kg/km± 10%,Max. Tensile Strength-Short Term: 1500N,Min. Crush Resistance- : 2000N/10 cm,Optical Performance Max. Attenuation; At 1310 nm : 0.35dB/km At 1550 nm : 0.20dB/km,RoHS Compliant. Preferred Make : Molex/Belden/Panduit.

OD96552/2024-2025:Supply, drawing. testing and commissioning of UL certified and ETL verified 23 AWG bare copper conductor UTP 4 pair HDPE inner Insulation Material, Steel Tape Armoured, HDPE/FRPVC outer Jacket External CAT 6A cable conforming to the standards ANSI/TIA-568-C.2, ISO/IEC 11801, IEEE 802.3, IEC 61156-5,Colour Code Per TIA/EIA 568-B,RoHS Compliant Compliant transmission performance tested upto 500 MHz or better and Insertion Loss/ Attenuation: 50 dB/100m or better at 500 MHz in the existing conduit as required Preferred Make : Molex,Belden,Panduit.

OD96570/2024-2025:SITC of 24 Port loaded Patch Panel -with Cat-6A shielded Material: steel,Coating: Black Powdercoat, constructed in 24 Port , IDC Connector - Plastic Housing: Polycarbonate, Contact Material: Copper Alloy,Contact Force: 100g minimum, Jack Connector- Housing: Zinc Alloy plated Bright Ni/Cu,Operating Life: Minimum 700 insertion cycles Contact Material: Copper Alloy,Plug Retention Force: 6.5kg minimum, The shielded connector must dual color coded for either 568A or 568B wiring schedules ,RoHS Compliant ,UL Verified, ISO and ANSI/EIA,IEC: Preferred Make : Molex,Belden,Panduit.

OD116512/2024-2025:SITC of Cat 6A, Patch Cords 3 MTR, , Blue, , 4 pair 26 AWG stranded copper wire,Pre-terminated plugs, Suitable for EIA 568A or 568B wiring,Must pass 1S0/IEC Vertical Flame spread test, Standards-ISO/IEC ,RoHS Complians. Preferred Make : Molex,Belden,Panduit.

OD116511/2024-2025:SITC of Cat 6A, Patch Cords 1 MTR, , Blue, , 4 pair 26 AWG stranded copper wire,Pre-terminated plugs, Suitable for EIA 568A or 568B wiring,Must pass 1S0/IEC Vertical Flame spread test, Standards-ISO/IEC ,RoHS Complians. Preferred Make : Molex,Belden,Panduit.

OD90768/2024-2025:Supply,Installation,Testing and Commissioning of Fiber Optic patch Cord (LC/UPC- LC/UPC), Duplex, Single mode OS2,Cable Sheath Material: LS0H,Retention Strength: 100N,Insertion Loss: 0.30dB,Attenuation: @ 1310nm <0.4dB/km , Preferred Make : Molex/Belden/Panduit

1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

OD90772/2024-2025:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench 32 mm or nearest size

OD90776/2024-2025:SITC of SFP Module-10G Base-LX Fiber SFP,LC duplex connector,1310 nm, for distances up to 10 km,Single Mode Fiber,ROHS Compliant,Compliant with SFP Transceiver MSA specification,Compliant with Specifications for IEEE 802.3z/10G Ethernet,Compliant with Industry Standard RFT Electrical Connector and Cage,Single + 3.3V Power Supply and TTL Logic Interface,EEPROM with Serial ID Functionality,"Laser Class 1 Product which comply with the requirements of IEC 60825-1 and IEC 60825-2&quot. Approved make : HP/Syrotech/Cisco

OD116504/2024-2025:Supply,Installation,Testing and Commissioning of Enterprise class POE Access Switch (380W) with minimum 8 x 2.5G ports 16 x 100/1G ports, and 4 x 1/10G SFP+ ports . . Switching throughput - 152Gbps, Forwarding Capacity - 95 Mpps, 16K MAC Address, IPv4 and IPv6 static routing. RIPv1/v2, RIPng, OSPFv2/v3 with Hardware replacement warranty and ongoing software upgrades for all major and minor releases for a period of 3 years , Preferred Make :Cisco/Allied Telesys,/Juniper/HP

OD90793/2024-2025:Supply,Installation,Testing and Commissioning Network Management License for Wired Switches & Wireless Access Points with support for Zero Touch Provisioning. Should support Device, Port and Interface Profiles for Auto Provisioning, detailed switch metrics and insights at a device level such as CPU, memory utilization and switch stack status. Should provide throughput, successful connects and switch health with pre- and post-connection performance metrics. Should provide inventory of switches and wired devices in a list, topology or location view. Should provide key health metrics such as switch firmware compliance, switch AP affinity, PoE compliance, and missing VLANs. Should provide Network Rewind and Dynamic Packet Capture for Wireless Networks. Should have a standalone wireless manager appliance to support 5000 AP's with a throughput support of 40Gbps. The appliance should support a minimum of Dual-Port 10GbE SFP+ . Should providing Client Profiling for Wireless Networks including device types, operating systems, applications, location, and user role. Should be able to Setup and track service level thresholds for key wireless criteria (pre- and post- connection metrics), such as Time to Connect, Successful Connects, Throughput, Roaming, Coverage, Capacity & AP Uptimewarranty - ongoing software upgrades for all major and minor releases for a period of 3 years. Preferred Make : Cisco/Allied Telesys/Juniper/HP

OD90797/2024-2025:Supply,Installation,Testing and Commissioning of 802.11ax MIMO access point ,Wireless access point should support 1 x 4x4:4 5Ghz Radio & 1 x 2x2:2 2.4Ghz Radio with Internal Antennas and should have additional 3rd Dual Band antenna for Security, Network and Location sensing. 2.5G Multi-Gig 802.3at Compliant port, support Bluetooth 5.0. Support 802.11ax features including OFDMA UL/DL, BSS Colouring, 1024-QAM Modulation and TWT Power Savings and hardware replacement warranty and ongoing software upgrades for all major and minor releases for a period of 3 years. Preferred Make : Cisco/Allied Telesys/Juniper/HP

Trenching

OD90769/2024-2025:(Modified DSR 2.10.1.2) Excavation of Trenching, of size upto 600mm depth. (For laying of UTP/OFC) 25 cm x60cm Trenching Hard Soil , providing protective covering with country burnt bricks laid breadth wise,refilling the trench etc as required (in hard soil) with indication(MS route marker) of patch of fiber.

CTL Infocom

Bidder Name

CTL Infocom

Syama Dynamic IT Services Pvt.Ltd