BUDGETTED

Name of Work :- Construction of Children Home for boys staff quarters and

new building for Specializes Adoption Agency at Godhra, Dist-Panchmahal.

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

1 Excavation for foundation upto 1.5 m depth including sorting out and 1372.00 Cum 117.08

stacking of useful materials and disposing off the excavated stuff upto

50 Meter lead.(A) Loose or soft soil

2 Excavation for foundation for depth from 1.5 m to 3.0 m including 966.00 Cum 129.81

sorting out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(A) Loose or soft soil

3 Filling in plinth with sand under floors including watering ramming, 377.00 Cum 460.19

consolidating and dressing complete

4 Filling available excavated Earth (Excluding Rock ) in trench plinth side of 1174.00 Cum 130.39

foundation . in layer not excluding 20 cm in depth consolidation each

deposited layer by ramming and watering etc. complete

5 Filling foundation and plinth with murrum or selected soil in layer of 20 cm in 2298.00 Cum 273.96

thickness including ramming watering and consolidating etc. complete

6 Carring out plinth treatment to post construction / existing structure by 1304.00 Sq.mt. 63.80

spraying chemical solution for termite control treatment including labour

and material consistment with I.S.I specification. Using Chlordene and

Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight one

percent is recommended i.e one litre 20 EC chemical emulsion with 19 liter

give 1 % concrentration inclusive of one litre chemical emulsion appication

at the rate of 5 Litre chemical / Sqm of surface is recommended as per I.S

7 Providing and laying controlled cement concrete M-250 and curing complete 664.00 Cum 4435.92

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in foundation footings, base of columns and mass

8 Providing and laying controlled cement concrete M.250 and curing 31.00 Cum 6857.02

complete including the cost of formwork and reinforcement for reinforced

concrete work in (D) Columns, Pillars posts and struts, upto floor two level.

9 Providing and laying cement concrete work 1:2:4 (1- Cement : 2- Coarse 181.00 Cmt 3848.68

sand : 4- graded stone aggregates 20 mm nominal size) and curing

complete excluding cost of formwork and reinforcement for reinforced

concrete work in (A) Foundations, footings, Base or columns and Mass

10 Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 123.00 Cum 2843.15

crushed stone aggregates 40 mm. nominal size) and curing complete

excluding cost of from work (a) Foundation and plinth

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

11 Providing and laying controlled cement concrete M.200 and curing 47.00 Cum 6811.44

complete including the cost of formwork and reinforcement for reinforced

concrete work in (D) Columns, Pillars posts and struts For Ground Floor

12 Providing and laying controlled cement concrete M-200 and curing complete 46.00 Cum 6850.55

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars posts and struts For First Floor

13 Providing and laying controlled cement concrete M-200 and curing complete 40.00 Cum 6889.65

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars posts and struts For Second

14 Providing and laying controlled cement concrete M-200 and curing complete 23.00 Cum 6928.76

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars posts and struts For Third Floor

15 Providing and laying controlled cement concrete M-250 and curing complete 202.00 Cum 5745.89

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Plinth BEAMS

16 Providing and laying controlled cement concrete M-150 and curing complete 154.00 Cum 4137.97

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in PLINTH SLAB

17 Providing and laying controlled cement concrete M-200 and curing complete 202.00 Cum 5962.03

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in BEAMS Ground Floor

18 Providing and laying controlled cement concrete M-200 and curing complete 207.00 Cum 6001.14

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in BEAMS First Floor

19 Providing and laying controlled cement concrete M-200 and curing complete 199.00 Cum 6040.24

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in BEAMS Second Floor

20 Providing and laying controlled cement concrete M-200 and curing complete 24.00 Cum 6079.35

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in BEAMS Third Floor

21 Providing and laying controlled cement concrete M-200 and curing complete 8.00 Cum 6100.40

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Lintels Ground Floor

22 Providing and laying controlled cement concrete M-200 and curing complete 10.00 Cum 6139.51

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Lintels First Floor

23 Providing and laying controlled cement concrete M-200 and curing complete 9.00 Cum 6178.61

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Lintels Second Floor

24 Providing and laying controlled cement concrete M-200 and curing complete 4.00 Cum 6217.72

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Lintels Third Floor

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

25 Providing and laying controlled cement concrete M-200 and curing complete 37.00 Cum 4757.10

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in CHHAJJAS Ground Floor

26 Providing and laying controlled cement concrete M-200 and curing complete 32.00 Cum 4796.21

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in CHHAJJAS First Floor

27 Providing and laying controlled cement concrete M-200 and curing complete 32.00 Cum 4835.31

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in CHHAJJAS Second Floor

28 Providing and laying controlled cement concrete M-200 and curing complete 2.00 Cum 4874.42

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in CHHAJJAS Third Floor

29 Providing and laying controlled cement concrete M-200 and curing complete 143.00 Cum 6082.22

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in SLABS for Ground Floor

30 Providing and laying controlled cement concrete M-200 and curing complete 137.00 Cum 6121.33

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in SLABS for First Floor

31 Providing and laying controlled cement concrete M-200 and curing complete 93.00 Cum 6160.43

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in SLABS for Second Floor

32 Providing and laying controlled cement concrete M-200 and curing complete 15.00 Cum 6199.54

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in SLABS for Third Floor

33 Providing and laying controlled cement concrete M-200 and curing complete 12.00 Cum 6430.67

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in RCC Walls Ground

34 Providing and laying controlled cement concrete M-200 and curing complete 12.00 Cum 6469.78

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in RCC Walls First Floor

35 Providing and laying controlled cement concrete M-200 and curing complete 42.00 Cum 6508.88

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in RCC Walls Second Floor

36 Providing and laying controlled cement concrete M-200 and curing complete 61.00 Cum 6547.99

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in RCC Walls Third Floor

37 Providing and laying controlled cement concrete M-200 and curing complete 10.00 Cum 7122.52

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in STAIRCASES Ground Floor.

38 Providing and laying controlled cement concrete M-200 and curing complete 10.00 Cum 7161.63

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in STAIRCASES First Floor.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

39 Providing and laying controlled cement concrete M-200 and curing complete 12.00 Cum 7200.73

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in STAIRCASES Second First Floor.

40 Providing T M T. bar reinforcement of Fe-500D reinforcement for R.C.C. 290805.00 Kg. 76.21

work including bending binding and placing in position complete up to All

41 Brick work using common Brunt clay building bricks having crushing 329.00 Cum 4021.02

strength not less than 35 Kg./Sq.cm.. In foundation and plinth in cement

mortar 1:6 (1cement : 6 fine sand) (b) Conventional

42 Brick work using common Brunt clay building bricks having crushing 249.00 Cum 4289.33

strength not less than 35 Kg./Sq.cm.. In super structure above plinth level

upto Floor two level in cement mortar 1:6 (1cement : 6 fine sand) (b)

Conventional {Ground Floor

43 Brick work using common Brunt clay building bricks having crushing 273.00 Cum 4329.52

strength not less than 35 Kg./Sq.cm.. In super structure above plinth level

upto Floor two level in cement mortar 1:6 (1cement : 6 fine sand) (b)

Conventional {First Floor }

44 Brick work using common Brunt clay building bricks having crushing 217.00 Cum 4369.70

strength not less than 35 Kg./Sq.cm.. In super structure above plinth level

upto Floor two level in cement mortar 1:6 (1cement : 6 fine sand) (b)

Conventional {Second Floor }

45 Brick work using common Brunt clay building bricks having crushing 58.00 Cum 4409.89

strength not less than 35 Kg./Sq.cm.. In super structure above plinth level

upto Floor two level in cement mortar 1:6 (1cement : 6 fine sand) (b)

Conventional {Third Floor }

46 Half brick masonry in common brunt clay building bricks having crushing 378.00 Sq.mt. 641.16

strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:5 (1- Cement : 5 -

coarse sand ) in foundation and plinth (B) Conventional Ground Floor.

47 Half brick masonry in common brunt clay building bricks having crushing 538.00 Sq.mt. 692.99

strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:5 (1- Cement : 5 -

coarse sand ) in foundation and plinth (B) Conventional First Floor.

48 Half brick masonry in common brunt clay building bricks having crushing 394.00 Sq.mt. 744.82

strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:5 (1- Cement : 5 -

coarse sand ) in foundation and plinth (B) Conventional Second Floor.

49 Half brick masonry in common brunt clay building bricks having crushing 161.00 Sq.mt. 796.66

strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:5 (1- Cement : 5 -

coarse sand ) in foundation and plinth (B) Conventional Third Floor.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

50 Providing and fixing 35mm thick wooden flush door specially designed 29.00 Sq.mt. 5431.78

hollow two flush door shutter made from teak wood frame of size 7.5cm x

3.8cm with top, middle,bottom rails & vertical two styles & both side water

proof ply wood of 6 mm thick. Pivoted the double shutter with requires

teakwood batten with 1mm thick lamination on both side, one coat of primer

& two coats of enamel paints on frame & edges, design of which is to be

approved by the architect. Door shall be providing with floor spring and

60cm long stainless steel handle and necessary Locking system of Godrej,

fixtures & fastenings etc. directed by engineer in charge.

51 Providing and fixing Single shutter doors pivoted without frame with Side 67.00 Sq.mt. 4604.59

Hung shutter made from 35mm thick solid wooden core conforming to

IS:2202 finished with 1mm thick Laminates on both sides of shutter,

machine glued PVC bending, on periphery SS handles and SS fixtures and

locking arrangements fixed each shutter with min 4 SS hinges 150mm high

sample and shade, exterior grade lamination, Colour, pattern and design is

to be approved by the Architect, with Stainless Steel Hinges, handle size

Cm Long, Tower Bolt size 25cm, & Heavy Stainless steel Aldrop as per

52 Providing and fixing FRP frame size 100 x 50 mm and 35 mm thick FRP 59.00 Sq.mt. 2377.76

shutter with depressed panel SHUTTER having extra reinforcement on

sides and edges and in GEL coat finish. The core of shutter is to be filled up

with injected fiber extinguishing grade polyurethane foam done in situ along

with embedded wooden pieces for stiffening and also for taking hinges and

fixtures. The whole FRP frame and shutter is to be water proof,

weatherproof, termite proof and resistance to mild acid / Alkali resistance

including S.S. hinges with necessary screws and aluminum fixtures and

53 Providing and fixing 7.5 hp submersible pump including all connection and 4.00 Nos. 22220.00

54 Providing and fixing window (Three shutter) having extruded aluminum 154.00 Sq.mt. 1583.95

Colour anodized section frame main outer size 95mm x 24mm x 1.17mm @

wt.of 0.738 Kg/mt , horizontal Three track member size 92mm x 31.75mm x

1.30mm,@ Wt.1.07 Kg/mt , vertical member of size 92mm x 31.75mm x

1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of horizontal member size

40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical member of size

40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt/ with two shutter with 5 mm

thick transparent bronze colour tinted float glass with powder coated

aluminum fittings and one shutter with SS mosquito net and fixtures and

transparent silicon sealant glass fixing to frame as per details etc complete

55 Providing and fixing 2 shutter Casement window having standard extruded 216.00 Sq.mt. 4278.36

colour anodized aluminum section equivalent to jindal series B section

numbers are : 20558 , 20559 ,20560, 19391 with 5 mm thick transparent

tinted float glass in shutter as well as fix glass top of window with sun control

film in pattern as directed, with rubber gasket, air lock strip and finishing

joints with silicon sealant, with standard extruded colour anodized aluminum

coated fittings as per details etc complete

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

56 Providing and fixing SWINGING SHUTTER WINDOW having standard 134.00 Sq.mt. 6287.25

extruded colour anodized aluminum section equivalent to jindal series

E(30mm) section numbers are : Frame Bottom Track 20878,Frame Top &

Sides 20877, Shutter Top & Lock Rail 21675 ,Bottom Rail 20772, Side Rails

20544, Interlock Rails 20550, with 5 mm thick transparent tinted float glass

in shutter with rubber gasket, air lock strip and finishing joints with silicon

sealant, with standard extruded colour anodized aluminum coated fittings &

fixtures , & fixed glazing above as per details etc complete.

57 Providing and fixing standared extruded of alluminium section of size 63mm 12.00 Sq.mt. 1217.65

x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized alluminium

frame for ventilation with 5 mm thick frosted glass as details etc complete

for Ventilation

58 Providing and fixing Safety grills of required pattern for windows / Ventilator / 22746.00 Kg. 109.08

Door using M.S polished bars / Pipes / M.S. Angles / Flats of size and at

required spacing as per drawings as per design and hold fasting with coach

bolts including one coat of primer and two coats of matt finished oil painting

59 P & L 60 cm * 60 cm Soluable salt Full body full body vitrified 10 mm thick 2123.00 Sq.mt. 1509.95

tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement:

coarse sand) on new surface or fixing on existing flooring by adhesive

material with color cement slurry including finised with flush pointing &

cleaning the surface etc. complete for light shade

60 Providing and laying 600 * 600 mm full body vitrified tiles 10 mm thick in 99.00 Sq.mt. 1270.58

skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white cement slurry

61 Providing & laying 600 × 600 mm Anti skid full body matt finish Vitrified tiles 391.00 Sq.mt. 1286.74

10 mm thick of premium quality in flooring treads of steps and landing laid

on bed of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand)

finishing with flush pointing in white cement including the cost of all

materials and labour charges etc. complete for Anti skid as per selection

and instructions of Engineer in charge

62 Providing and laying polished Kota stone slab flooring over 20mm (Average) 139.00 Sq.mt. 976.72

thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-

Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry

mixed with pigment to match the shade of slab including rubbing and

polishing etc. complete. (A) 25mm thick (upto 10 ton)

63 Providing and laying Ceramic tiles 6mm thick in skrting risers of steps and 562.00 Sq.mt. 995.81

dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and

jointed with white cement slurry (upto 10 ton)

64 Providing and laying Matt finish antiskid Ceramic tiles 6mm thick in flooring 58.00 Sq.mt. 957.63

treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3

(1-cement : 3-coarse sand ) finishing with flush pointing in white cement.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

65 Providing and laying Machine cut 18mm thick granite in single piece with all 607.00 Sq.mt. 3154.23

free edges rounded double moulding, machine polished in landing ,tread

and riser incl and 1 cm nosing and necessary groove as per design on

mm thick cement mortar 1:6 (1 -cement : 6 coarse sand) on treads &

mm thick cement mortar 1:3 for risers, jointed with grey cement slurry

including rubbing and polishing with colour and design approved by

engineer in charge etc. complete.

66 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete 891.00 Sq.mt. 686.90

block 60mm thick with grade of concrete M300 pnumatic compressed /

vibrated mechanically and as per approved design Confirming to IS 15658 :

2006 including 35 mm Sand layer for levelling and filling the joint with sand

in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete.

67 Providing and fixing pre-cast concrete kerb stone of gray cement based 290.00 Rmt. 383.38

concrete block 30cm length,30cm height and 15cm thick of M200 grade

concret as per approved design and including excavation for fixing in proper

line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc

68 Providing and laying broken china mosaic flooring for terrace using 12 918.00 Sq.mt. 982.24

mm to 20 mm broken pieces of glazed tiles to be laid over cement mortar

1:3 to plain or slope and to be tempered to bring mortar creme out upto

surface using white cement including rounding off junctions and extending

them upto 15 cm along the wall,clearing with water and oxalic acid etc. over

cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded stone

aggregate 20mm nominal size) laid in one layer and finished with a floating

coat of neat cement. (A) 40mm thick. (upto 10 ton) etc. complete

69 Providing 20 mm thick double coat mala cement plaster on interior brick / 1102.00 Sq.mt. 270.43

concrete work for plastering comprising of base coat of 12 mm thick cement

plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and

8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand)

finished with trovel including scaffolding curing etc. complete. Ground floor

70 Providing 20 mm thick double coat mala cement plaster on interior brick / 1271.00 Sq.mt. 296.36

concrete work for plastering comprising of base coat of 12 mm thick cement

plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and

8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand)

finished with trovel including scaffolding curing etc. complete. First floor

71 Providing 20 mm thick double coat mala cement plaster on interior brick / 990.00 Sq.mt. 322.30

concrete work for plastering comprising of base coat of 12 mm thick cement

plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and

8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand)

finished with trovel including scaffolding curing etc. complete. Second floor

72 Providing 20 mm thick double coat mala cement plaster on interior brick / 262.00 Sq.mt. 348.24

concrete work for plastering comprising of base coat of 12 mm thick cement

plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and

8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand)

finished with trovel including scaffolding curing etc. complete. Third floor

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

73 Providing 10 mm. Thick cement plaster in single coat for plastering on 882.00 Sq.mt. 164.97

ceiling and soffits of stairs upto Floor two level and finished even and

smooth in : (I) Cement mortar 1:3 (1 cement : 3 sand) Ground Floor

74 Providing 10 mm. Thick cement plaster in single coat for plastering on 881.00 Sq.mt. 187.73

ceiling and soffits of stairs upto Floor two level and finished even and

smooth with a floating coat of neat cement slurry in : (I) Cement mortar 1:3

(1 cement : 3 sand) First Floor

75 Providing 10 mm. Thick cement plaster in single coat for plastering on 539.00 Sq.mt. 210.48

ceiling and soffits of stairs upto Floor two level and finished even and

smooth with a floating coat of neat cement slurry in : (I) Cement mortar 1:3

(1 cement : 3 sand) Second Floor

76 Providing 10 mm. Thick cement plaster in single coat for plastering on 113.00 Sq.mt. 233.24

ceiling and soffits of stairs upto Floor two level and finished even and

smooth with a floating coat of neat cement slurry in : (I) Cement mortar 1:3

(1 cement : 3 sand) Third Floor

77 Wall painting (two coats) with plastic emulsion paint of approved brand and 6258.00 Sq.mt. 119.49

manufacture on undecorated wall surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign

matter and sand papered smooth including Applying two coats of lappy

(putty) and two coats of primer of approved brand and manufacture on new

wall surface to give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter and sand

papered smooth.

78 20mm thick sand faced cement plaster on walls upto height 10 metres 3419.00 Smt 335.83

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete.&Extra over item for pointing on walls on the outside at

height more than 10metres from ground level for every additional height of

5 metres of part there of

79 Finishing wall with weather proof exterior emulsion paint on wall surface 3419.00 Sq.mt. 114.53

(two coats) to give an required shape even shade after thoroughly brushing

the surface to remove all dirt, and remains of loose powdered materials etc

80 Providing and fixing 90 cm high Stainless steel railing made from 238.00 Rmt. 3015.86

anticorrocive 304 grade S S pipe of 50 mm dia (16Gauge) as hand rail with

S S 304 grade Baluster of 38 mm dia (16Gauge) as a vertical support fixed

in RCC slab at 1.2m c/c including three horizontal S S pipes of 25 mm dia

(16Gauge) at eqal distance fixed by 18.75 mm dia (16Gauge) S S pipe with

baluster including accessories as per detailed drawing as directed etc.

81 Providing & fixing Fix louvers of 114 mm wide GI sheet having thickness of 8.00 Sq.mt. 3535.00

0.55 mm & weight not less than 490 gm/ meter roll formed to create 84 mm

wide louver snap fixed on special shaped GI channel.Fix louvers & channels

shall finished with powder coating of 55 micron .

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

82 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( 145.00 Rmt. 72.65

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

83 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( 265.00 Rmt. 91.84

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

84 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( 350.00 Rmt. 148.12

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

85 Providing and fixing concealed center point to wall ceiling & floor CPVC 160.00 Rmt. 166.86

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete.[A] 15 mm.

86 Providing and fixing Heavy Handle valve of aprroved brand & follwing 12.00 Nos. 237.35

internal dia of Brass including fixing in pipe lines etc.complete (A) 15 mm

87 Providing and fixing Heavy Handle valve of aprroved brand & follwing 14.00 Nos. 348.45

internal dia of Brass including fixing in pipe lines etc.complete (C) 25 mm

88 Providing and fixing Heavy Handle valve of aprroved brand & follwing 18.00 Nos. 499.95

internal dia of Brass including fixing in pipe lines etc.complete (E) 40 mm

89 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working 92.00 Rmt. 277.43

pressure polythene pipes of the following outside Dia. Low densidy,

complete with special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and floor.(F) 75mm

90 Providing, laying and jointing in true line and level 110 diametre U.P.V.C 414.00 Rmt. 835.15

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost of

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

91 Providing, laying and jointing in true line and level 160 diametre U.P.V.C 222.00 Rmt. 831.22

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at

every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost of

92 Providing and fixing M.S.clamp made from 40mm x 6mm thick M.S.flat as 323.00 Sq.mt. 152.51

per design given by Engineer in charge for fixing the C.I. / G.I. / PVC pipe on

wall of duct to stay away from wall etc. complete.

93 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm 75.00 Nos. 558.36

diameter with jali of the following nominal diameter of self cleansing design

with C.I scread down or hinged grating including the cost of cutting and

making good the walls.

94 Providing and fixing Screw down Quarter turn bib taps of following size (A) 45.00 Nos. 186.83

Brass chromium plated screw down Bib tap (I) 15 mm dia

95 Providing and fixing Push Type bib taps of following size (A) Brass 24.00 Nos. 353.50

chromium plated Push Type Bib tap (I) 15 mm dia

96 Providing and fixing pillar tap, capstan head, screw down high pressure 33.00 Nos. 308.73

with screws, shanks and back nuts. (i) 15mm dia.

97 Providing and fixing wash basin with pedestal of std. Height with single hole 39.00 Nos. 1757.40

for pillar tap with C.I or M.S brackets painted white including cutting cutting

holes and making goods the same including. C.P. brass waste and waste

pipes and bottaltrap (A) Vitreous china. (II) Flat back washbasin 550 mm x

400 mm size (I) in colour {Hindustan, Cera, Parryware or equivalent }

98 Provision and fixing water closet squatting orissa type W.C. pan size 9.00 Nos. 1579.64

580mm integral footrest and 100 mm P or S trap and in cluding 25 mm dia

CP brass flush valve and GI inlet connection etc. comp. (A) Vitreous china

long pattern white or color {Hindustan, Cera, Parryware or equivalent }

99 Pro. & Fix. wash down water closet (European w. c .pan) with integral" p " or 12.00 Nos. 4301.59

" s " trap and 40 mm dia metropole dual flush cock including making good

the same etc comp incl plastic sheet cover including jointing trap with pipe in

cm 1:1 (a ) Vitreous china in white or color {Hindustan, Cera, Parryware or

100 Providing and fixing urinal of approved quality connecting the urinal with 6.00 Nos. 1036.27

waste pipe, trap etc. complete. (A) White earthen ware flat back or corner

type size {Hindustan, Cera, Parryware or equivalent } 430mm x 260mm x

101 Providing erecting and fixing double coated ISI water tank of required 16000.00 Liter 3.95

capacity each with all necessary fittings and connection etc. complete on

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

102 Providing and fixing 600 mm x 450 mm bevelled edge mirror of superior 28.00 Nos. 833.73

glass mounted on 6 mm thick A.C sheet or plywood sheet or PVC framing

and fixed to wooden plugs with C.P brass screw and washers.

103 Providing and fixing CP brass stop cock of approved quality 15 mm size 25.00 Nos. 205.83

with adjestable wall flange .

104 Providing and fixing chromium plated brass half trun flush cock of approved 24.00 Nos. 263.77

quality including fixing in pipe line etc. complete.(i) 25mm dia

105 Constructing brick masonary chamber for under ground C.I. Inspection 35.00 Nos. 2932.93

chamber and bends with bricks having crushing strength not less than

Kg/cm2 in cm. 1:5 C.I. Cover with frame (light duty) 455 mm. X 610 mm.

Internal dimensions, total weight of cover with frame to be not less than

Kgs. weight of cover 23 Kg. and wt. of frame 15 Kg) R.C.C. top slab with

1:2:4 mix(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm. size

) foundation concrete 1:5:10 inside plaster 15 mm. thick with cement mortar

1:3 finished smooth with a floating coat of neat cement on walls & bed

concrete etc. complete. (I) inside dimensions, 455 mm. x 610 mm. And

mm. Deep for single pipe line.

106 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 385.00 Rmt. 41.00

107 Providing and fixing in position 300 mm high, 150 mm wide English letters 36.00 Nos. 707.00

made from 1.0 mm thick stainless steel sheet as directed by Engineer-in-

charge with all necessary tools & plants etc. complete.

108 Providing and fixing in position 150 mm high, English letters made from 1.0 60.00 Nos. 404.00

mm thick stainless steel sheet as directed by Engineer-in-charge with all

necessary tools & plants etc. complete.

109 Constructing Sandwitch Platform of 18 mm thick Polished Black Granite at 49.00 Sq.mt. 3110.80

top and 25 mm thick Kota stone slab using cement mortar 1:3 for sandwich

and fitting at bottom & edges with waterproof rigid adhesives including

macking necessary grooves in walls with Vertical Kotastone 30 mm x 2 No

sandwitch thick every 60 cm centre to cenre including all labour material of

approved quality incl. full moulded round front edge fixed in wall for partition

and jointed with grey cement slurry including rubbing and polishing etc.

110 Providing and fixing 18 mm.thick of approved quality of Granite urinal 4.00 Nos. 1410.97

partition in single piece of size 0.62 x 1.20 mt. in cement mortar 1:1 (1

cement : 1 coarse sand) and finishing with white cement including polishing

on bothsides,finishing edges with round shape etc. complete. Rate

includes for all lead & lift & as per directed by EIC.

111 Providing construction of Septic tank of size 4.20x2.30x2.00 mt including 3.00 Nos. 63909.77

necessary excavation BBCC 1:5:10 Brick masonary work in CM 1:5 RCC

top Slab M-200 half brick masonary partition 15mm thick cement plaster in

CM 1:4 main hole with C.I. cover etc. complete

112 Providing and construction 3.00 mt inner dia and 6.50mt deep soak pit 4.00 Nos. 52179.63

including excavation BBCC, Brick masonary work at bottom and top

including RCC Slab at top in honey combica masonary in mud goober as

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

113 Providing & Fixing the Chikenmesh - 20 guage (Crimp Jali) of approved size 1219.00 Sq.mt. 61.61

applying between the RCC and masonry junction in proper line, level and

plumb with all material, labour, tools, tackles and equipment including fixing

the jali with nails, etc complete as directed by the Engineer-in-charge.

114 Providing and laying controlled cement concrete M-200 and curing complete 5.00 Cum 6967.87

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars posts and struts For Fourth

115 Providing and laying controlled cement concrete M-200 and curing complete 5.00 Cum 6118.46

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in BEAMS Fourth Floor

116 Providing and laying controlled cement concrete M-200 and curing complete 1.00 Cum 6256.83

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Lintels Fourth Floor

117 Providing and laying controlled cement concrete M-200 and curing complete 3.00 Cum 6100.94

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Wall caps/Coping/Lintel bends. Ground Floor

118 Providing and laying controlled cement concrete M-200 and curing complete 1.00 Cum 6140.04

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Wall caps/Coping/Lintel bends. First Floor

119 Providing and laying controlled cement concrete M-200 and curing complete 1.00 Cum 6179.15

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Wall caps/Coping/Lintel bends. Second Floor

120 Providing and laying controlled cement concrete M-200 and curing complete 1.00 Cum 6218.26

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Wall caps/Coping/Lintel bends. Third Floor

121 Providing and laying controlled cement concrete M-200 and curing complete 1.00 Cum 4913.53

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in CHHAJJAS Fourth Floor

122 Providing and laying controlled cement concrete M-200 and curing complete 4.00 Cum 6238.65

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in SLABS for Fourth Floor

123 Providing and laying controlled cement concrete M-200 and curing complete 3.00 Cum 7239.84

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in STAIRCASES Third Floor.

124 Brick work using common Brunt clay building bricks having crushing 25.00 Cum 4450.08

strength not less than 35 Kg./Sq.cm.. In super structure above plinth level

upto Floor two level in cement mortar 1:6 (1cement : 6 fine sand) (b)

Conventional {Fourth Floor }

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

125 Providing and fixing door having side hung single shutter having factory 36.00 Sq.mt. 3184.53

fabricated std. Extruded aluminium colour anodized hollow section {Section

63.50 x 38 mm x 2.50 mm thick} for door frame, hollow portion of door frame

shall be filled with non teakwood wood, with factory made 35 mm. Thick

flush door both side pre laminated with 6 Lever Mortice lock {Godrej or

Equivalent), Door closers (Heavy type of 765 number) Hardwire or Everite

Prabhat or Equivalent.SS Aldrop, SS Handle size 15 Cm Long, Tower Bolt

size 20 cm etc. as per detail colour & pattern apporoved by this office

including necessary anodized alluminum fixtures and fastenings.

126 Providing and fixing Openable alluminium casement window having 24.00 Sq.mt. 3232.00

standard extruded aluminum Colour anodized section frame having frame

bottom, top & sides member Jindal Section no 20903 @ wt of 0.522kg/ Rmt

with openable shutter of single glass shutter top and bottom and side

member jindal section 20914 @wt .73 kg/Rmt & Glazing clip member jindal

section no 19370 @ wt of 0.109kg/rmt with 5 mm thick transportation plain

float glass in shutter including fitting, fixture, rubber gasket and transparent

silicon sealant as per drawing and instruction of EIC etc Complete

127 Providing 20 mm thick double coat mala cement plaster on interior brick / 195.00 Sq.mt. 374.17

concrete work for plastering comprising of base coat of 12 mm thick cement

plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and

8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand)

finished with trovel including scaffolding curing etc. complete. Fourth floor

128 Providing 10 mm. Thick cement plaster in single coat for plastering on 20.00 Sq.mt. 255.99

ceiling and soffits of stairs upto Floor two level and finished even and

smooth with a floating coat of neat cement slurry in : (I) Cement mortar 1:3

(1 cement : 3 sand) Fourth Floor

129 Providing and laying Machine cut free Edges double Polished Kota stone 32.00 Sq.mt. 539.34

slab for Shelves in cupboard and walls in single peace 25mm thick including

cutting grooves in walls and fixing the stone neat cement slurry in true line

and level and making good the groove with C M 1:3 as as directed by

Engineer in charge etc.complete.

130 Providing and fixing steel cupboard having frame of 40 mm x 40 mm x 5 18.00 Sq.mt. 3070.40

mm M.S. angle double door shutter of CRS plate of 18 gauge (1.219 mm

thickness) with 30 mm x 3 mm x 3mm angle framing at top and bottom edge

of shutter 10 mm x 10 mm square M.S. bars 2 Nos. vertical and 40 mm x

mm M.S. flat at one edge of each shutter and for lock along with one coat of

red oxide and two coats of spray oil painting of approved brand and colour

shed and locking arrangement including 20 mm thick both side polished

kotah stone fixed in walls (5 Nos. of shelves )with making grooves and

having front edge with full moulding etc. complete as directed by Engineer-

131 Providing and fixing Number plate of Marble plate stone of required size set 4.00 Nos. 306.14

in C.M. 1:4 including finishing and engeaving letters etc. completes.

132 Providing and Fixing Soap Dish (A) C.P. Brass 6.00 Nos. 151.50

133 Providing and Fixing Napkeen Holder (Ring type) (A) C.P Brass 6.00 Nos. 151.50

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

134 Providing and fixing toilet paper holder.(A) C.P. Brass 3.00 Nos. 418.68

135 Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 3.00 Nos. 282.16

100mm dia. Each

136 Providing and fixing in position cowel went to pipes.(B) 75mm dia.. 2.00 Nos. 389.74

137 Providing and fixing in position cowel went to pipes.(C) 100mm dia 2.00 Nos. 501.87

138 Providing and fixing wooden cupboard with 19mm thick IS 710 water 33.00 Sq.mt. 5110.60

proofing plywood sheet and 1mm laminated sheet on both side with SS

hinge,handle, lock and all necessary fittings and fixtures as instructed by

Engineer in charge etc.complete.

139 Providing and fixing premium quality PVC set of five kitchen trolleys of size 3.00 set 14645.00

17 inches wide & 20 inches depth with telescopic channels and other

required fixtures for different utensils as cup and saucers, spoon, dishes,

bowls and other as required for kitchen with all necessary fittings and labour

as directed by Enginer In charge etc. complete

140 Dismentling of doors, windows, ventilators etc. (wood or steel) shutters 102.00 Nos. 182.94

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift (ii) Not Exceeding

141 Dismentaling tiled of stone floors laid in mortar including stacking of 685.00 Sq.mt. 46.77

serviceable materials and disposal of unserviceable materials with all lead

142 Demolition including stacking of serviceable materilas and disposal of 91.00 Cum 1030.81

unserviceable materials with all lead and lift. (1) R.C.C. work

143 Demolition of Brick work and stone masonry including stacking of 278.00 Cum 536.09

serviceable materilas and disposal of unserviceable materials with all lead

and lift. (ii) In Cement Mortar

144 Dismentling steel work including distempering and stacking the materials 1052.85 Kg. 3.67

with all lead and lift.

145 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings 198.00 Rmt. 73.02

and clamps including stacking the materials with all lead and lift (for any dia,

146 Dismantling santtary fittings like wash basin. W.C. pan Indian and European 23.00 Nos. 394.51

type, flushing tank etc. including stacking the materials with all lead and lift.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

147 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 445.00 Pt. 485.81

(a) (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below type of pipe erected with

6A Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling

rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall / ceiling complete. Cat-III ( Make:-

Pipe:Precision / Polycab / Vraj / Nihir / Astral, Wire: Polycab / RR Kabel /

KEI / Finoloex / Havells, Accessories: Havells/Anchor/Greatwhite/Vinay)

147 Point wiring for Light in Toilet+ Bath Cat-III 6.00 Pt. 242.91

148 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) 163.00 Pt. 674.68

both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected with 6A

Modular type switch and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following type erected on

PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as

per pipe erected. with necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Ca-III ( Make:- Pipe:Precision/Polycab/Vraj/Nihir

/Astral, Wire: Polycab/RR Kabel/KEI/Finoloex/Havells, Accessories:

Havells/Anchor/Greatwhite/Vinay)

149 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both 29.00 Pt. 510.05

(a) are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected on / in wall / ceiling as

per pipe erected with following type of accessories.[I] For 6A Plug and 6 a

switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db

board.(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete.Cat-III ( Make:-

Pipe:Precision/Polycab/Vraj/Nihir /Astral, Wire: Polycab/RR

Kabel/KEI/Finoloex/Havells, Accessories: Havells/Anchor/Greatwhite/Vinay)

149 [II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb 31.00 Pt. 745.38

(b) db board.(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete.Cat-III ( Make:-

Pipe:Precision/Polycab/Vraj/Nihir /Astral, Wire: Polycab/RR

Kabel/KEI/Finoloex/Havells, Accessories: Havells/Anchor/Greatwhite/Vinay)

150 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin 136.00 Pt. 257.55

socket erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate modules erected on / in

wall / ceiling with following type accessories. Ca-III ( Make:-

Pipe:Precision/Polycab/Vraj/Nihir /Astral, Wire: Polycab/RR

Kabel/KEI/Finoloex/Havells, Accessories: Havells/Anchor/Greatwhite/Vinay)

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

151 Providing following type of Modular Type Accessories mounted with PVC / 29.00 Ea. 160.59

(a) metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as

per site situation directed by Engineer In charge.(8) Computer RJ-45 socket

Ca-III ( Make:- Accessories: Havells/Anchor/Greatwhite/Vinay)

151 (9) 16 Amp. SP one way switch.Cat-III ( Make:- Accessories: 17.00 Ea. 180.79

(b) Havells/Anchor/Greatwhite/Vinay)

151 (10) 6/16Amp. Universal socket Ca-III ( Make:- Accessories: 25.00 Ea. 199.98

(c) Havells/Anchor/Greatwhite/Vinay)

151 (14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular MCB Switch.Cat-III 8.00 Ea. 410.06

(d) ( Make:- Accessories: Havells/Anchor/Greatwhite/Vinay)

152 Providing and erecting ISI mark Medium class RIGID PVC PIPES of 725.00 Mtr. 33.33

following size complete to be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed with adhesive solution &

Clamps with following dia of pipes, in approved manner as directed. (b)

mm( Make:- Pipe:Precision/Polycab/Vraj/Nihir /Astral)

153 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 2575.00 Mtr. 82.82

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size. (a) with medium class Rigid PVC pipe and

accessories.(a) 2 wire 1.5 sq. mm(b) 2 wire 2.5 sq. mm ( Make:-

Pipe:Precision/Polycab/Vraj/Nihir /Astral, Wire: Polycab/RR

Kabel/KEI/Finoloex/Havells,

154 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 500.00 Mtr. 112.11

(a) marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of following size

(a) with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

( Make:- Pipe:Precision/Polycab/Vraj/Nihir /Astral, Wire: Polycab/RR

Kabel/KEI/Finoloex/Havells,)

154 (b) 2 wire 6 sq. mm Wire: Polycab/RR Kabel/KEI/Finoloex/Havells,) 25.00 Mtr. 147.46

154 (h) 4 wire 6 sq. mm Wire: Polycab/RR Kabel/KEI/Finoloex/Havells,) 260.00 Mtr. 260.58

155 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv 170.00 Mtr. 46.46

grade ISI marked copper wires of following size to be erected as directed.(e)

1.50 Sq.mm 3 core round PVC sheathed ( Make:-

Pipe:Precision/Polycab/Vraj/Nihir /Astral, Wire: Polycab/RR

Kabel/KEI/Finoloex/Havells,)

156 Supplying & erecting approved make LAN cable of following size in existing 725.00 Mtr. 47.47

pipe as per direction. [C] CAT - 6 (Make:-Dlink,Havells,Kei,Finolex)

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

157 Providing & erecting Switch board for Computer or electric apparatus 29.00 Ea. 1133.22

consisting of following modular type accessories mounted with PVC /

Metallic concealed/open box with single mounting base frame covered with

textured/metallic /white front plate,modules erected with necessary

connections as directed. 1 no. 6A/16A universal plug-switch combined.

nos. 6A Switch, 3 nos. 6A 5 pin Plug [B] For Modular Type Accessories Ca-

III ( Make:- Havells/Anchor/Greatwhite /Vinay )

158 Decorative call bell Ting-tong box type 250 volts complete erected 5.00 Ea. 71.71

159 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 2.00 Ea. 373.70

(a) 0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium

die cast powder coated and high U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V, Power Factor more than 0.95,

THD < 15%,CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt

,LED driver efficiency > 85 % (fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (A) Tube Light with integral driver. (iv)

22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet Ca-III ( Make :-

Phillips, Havells, OSRAM, Crompton, Wipro, Jaguar )

159 (v) 36 Watts, Surge-2 KV, IP-20, conventional 4 feet Ca-III ( Make :- 304.00 Ea. 535.30

(b) Phillips, Havells, OSRAM, Crompton, Wipro, Jaguar )

160 Supplying and erecting led lamps with following wattage capacity of 220 to 41.00 Ea. 112.11

240 voltage, minimum 15000 burning hours life, 500 V in built,

surge,protection,Polycarbonate diffuser, mounting suitable for E14 / E27 /

B22 lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser

suitable LAMP holder. (ii) 8 watts Cat-III ( Make :- Phillips, Havells,

OSRAM, Crompton, Wipro, Jaguar )

161 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 61.00 Ea. 589.84

(a) 0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name 160V

to 270V,Power Factor more than 0.95, THD < 15 %,CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)(A) Square/ Circular shaped

Surface/Recessed Mount Downlight with provision for spring loaded

mounting clips complete.IP20 (iii) 16-20 watts, Surge-2 KV Cat-III ( Make :-

Phillips, Havells, OSRAM, Crompton, Wipro, Jaguar )

161 (B) LED Panel Light with provision for Plane front frame with translucent 20.00 Ea. 1794.77

(b) cover fixed to housing complete.IP20 (vi) 36 watts, 24" x 24", Surge- 2KV

Cat-III ( Make :- Phillips, Havells, OSRAM, Crompton, Wipro, Jaguar )

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

162 Supplying and erecting LED street light / Flood light fittings with High power 33.00 Ea. 4997.48

(a) White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED

driver efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)(A) Street Light (IP-65), Surge

protection -4KV integral and ,Light must have 440VAC line supply with over-

voltage protection. (ii) above 48 to 60 Watts Cat-III ( Make :- Phillips,

Havells, OSRAM, Crompton, Wipro, Jaguar )

162 (B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 10.00 Ea. 9647.52

(b) 440VAC line supply with over-voltage protection.(vi) above 160 to

watts.Cat-III ( Make :- Phillips, Havells, OSRAM, Crompton, Wipro, Jaguar )

163 Providing and erecting Approved make Four pole moulded case circuit 5.00 Ea. 6790.43

breaker having breaking capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S.

housing.ICS=100% of ICU only.Cat III I( Make :- L&T, Havells, C&S,

164 Providing and erecting Approved make Four pole moulded case circuit 2.00 Ea. 8055.76

breaker having breaking capacity ICU of 35 KA. at 415 V. having normal

current rating 125A. with Fixed thermal & magnetic release suitable to work

on A.C.supply 50 c/s. with all internal connections, spreader tinned copper &

complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only. Cat

III I( Make :- L&T, Havells, C&S, Indoasian )

165 Supplying and erecting triple pole & neutral 440V / 500V panel mounting 1.00 Rn.Mtr 1961.42

(a) Copper Busbars with four equal Nos. of electrolyte bus having current

density not more than 1.6 Amp. / sq.mm (Rated current / cross section area)

duly wrapped with colour insulating tape for phase sequence of following

current carrying capacity, erected with necessary bus bar supports

/insulators, main cable socket to each bar, erected in existing cubical panel

with necessary connections.(A) Suitable for 100 Amp. Capacity

165 (B) Suitable for 200 Amp. capacity 1.00 Rn.Mtr 3202.71

166 Providing and erecting Miniature circuit breaker single pole 0.5A to 2A 43.00 Ea. 270.68

system and having breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark.Cat-III I( Make :- L&T, Havells,

C&S, Indoasian )

167 Providing and erecting Miniature circuit breaker single pole 6A to 25A 224.00 Ea. 112.11

suitable to operate on 240 V A.C. system and having breaking capacity

KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark

Ca-III I( Make :- L&T, Havells, C&S, Indoasian )

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

168 Providing & erecting 240 V MCB double pole switch for motor & inductive 11.00 Ea. 330.27

load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in

existing box having following capacity.(B) 40 Amp.Cat-III I( Make :- L&T,

Havells, C&S, Indoasian )

169 Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B 5.00 Ea. 578.73

(a) curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

having following capacity.(a) 6 to 32 Amp. Cat-III I( Make :- L&T, Havells,

C&S, Indoasian )

170 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C 7.00 Ea. 595.90

(a) Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

having following capacity.(a) 6 to 32 Amp. Cat-III I( Make :- L&T, Havells,

C&S, Indoasian )

170 (b)40 Amp. Cat-III 6.00 Ea. 668.62

171 Plastic enclosure fitted with DIN rail suitable for incorporating Three /Four 3.00 Ea. 108.07

nos. MCB I( Make :- L&T, Havells, C&S, Indoasian )

172 Sheets steel powder coated enclosure suitable for incorporating One/Two 9.00 Ea. 176.75

nos. MCB. I( Make :- L&T, Havells, C&S, Indoasian )

173 Providing and erecting Sheet Steel powder coated MCB distribution board - 1.00 Ea. 1492.78

(a) flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of

MCB to be used) suitable for (A) single phase incoming and horizontal

single phase outgoing (b) sheet steel double door (IP-43) (iv)12 way I( Make

:- L&T, Havells, C&S, Indoasian )

173 (B) three phase incoming and single phase horizontal type outgoing Per 13.00 Ea. 2913.85

(b) phase isolation type (PPI) (b) sheet steel double door(ii)6 way

174 Providing and erecting Approved make RCCBs conforming to IS: 12640 and 49.00 Ea. 1969.50

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on single phase 240 V,50Hz. having

characteristic of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max. rating erected as

directed. (i) 25 Amps.DP.Cat-III I( Make :- L&T, Havells, C&S, Indoasian )

175 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 40.00 Kg 77.77

176 Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised iron 27.00 Ea. 368.65

pipe with coupling and buch buried in specially prepared earth pit complete

with necessary 8 SWG earth wire.

177 For using salt and charcoal / coke as required for pipe type earthing. 27.00 Ea. 171.70

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

178 Supplying & erecting earth pit of minimum bore dia.150mm size approved 4.00 Ea. 4591.46

make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia of 12mm with constant

ohmic value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber and

heavy duty cover.(approved make OEM has to submit test certificate) &

having back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 / meter testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to retain moisture for long time

Necessary test report must be submitted. (a) For Electrical Installation up to

440V in normal soil Length of pipe - 1 Mtr Back filling compound - 1 Nos

179 Providing & erecting weather proof, dust & vermin proof, floor mounted front 3.50 Sq.Mtr 10468.65

operated indoor type cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge made from 14 SWG

thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet

for internal partitions with necessary accesories , supporting angles/ flats

channel including cutting, bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements & instruction of engineer-in-

charge with erection of supplied switch gears, BUSBARS, suitable size of

inter connecting PVC copper wire / copper-aluminium strips, rubber

grommets, rib, bakelite control fuses/MCB for measuring instruments, earth

bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of

hinged doors, handles with locking arrangement and rubber gasket,heavy

duty end terminal onnection, danger notice board,necessary ventilation,

earthing strip complete. The Panel shall be painted with epoxy powder

(The rates excludes the cost of switchgears, bus bars, inter connecting

mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall

be measured excluding base beams) The panel shall be supplied with

following approved manufacturers with following size.(A) locally fabricated

panel board.(i) with 350 mm depth

180 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand 60.00 Mtr. 220.18

(a) Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe of following size of cables.(B) 3 1/2 core 35 Sq.

mm ( 16 Sq. mm 1/2 core) ( Make :- Finolex, RR Kabel, Havells, Polycab,

180 (D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core)( Make :- Finolex, RR 30.00 Mtr. 378.75

(b) Kabel, Havells, Polycab, KEI )

181 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand 1000.00 Mtr. 126.25

/ Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe of following size of cables (b) 4 core

Sq. mm ( Make :- Finolex, RR Kabel, Havells, Polycab, KEI )

182 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand 100.00 Mtr. 153.52

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe of following size of cables.(A) 4 core 16 Sq. mm (

Make :- Finolex, RR Kabel, Havells, Polycab, KEI )

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

183 Making trench in soft soil of suitable width of 90 cm deep for laying cable or 730.00 Mtr. 55.55

locating the fault all over the run and back filling the same and making the

surface as normal ground.

184 Providing & laying approved make Double walled corrugated pipes (DWC) 770.00 Mtr. 62.62

of polyethylene(conforming to IS 14930 II )with necessary connecting

accessories of same material at required depth in existing trench for laying

of cable. below ground / road surface for enclosing cable (A) 50 mm Outer

185 Providing and, fixing heavy duty flange type brass cable gland with rubber 64.00 Ea. 38.38

(a) ring for PVC insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables.(c) 2 to 4 core 6 Sq. mm

186 Providing and, fixing heavy duty flange type brass double compression type 4.00 Ea. 75.75

(a) cable gland with rubber ring for PVC insulated armoured cable complete

with out going tails, insulating tape etc for following size of cables.(B) 3 &

1/2 core 35/50 Sq. mm

187 Solder less crimping type Aluminium lugs conforming to IS suitable for cable 256.00 Ea. 6.06

(a) of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

manner.(A) 1.5/ 2.5/4/6 Sq.mm

188 Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan 162.00 Ea. 1948.29

with double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz

mm sweep complete having 3blades with aluminium blades with , canopy &

30 cm. down rod erected with earthing.(Make shall be approved by Engineer

in charge)) ( Make :- Havells, Orient, Crompton, Bajaj )

189 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe 162.00 Mtr. 108.07

down rod erected duly painted for fan complete with proper insulation

without leakage and earthing.

190 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to 162.00 Ea. 108.07

the RCC bars up to 50mm length each side and pierced through a

Gauge M.S. box / Heavy Duty PVC box complete erected concealed in

Ceiling with necessary finishing.

191 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan 162.00 Ea. 18.18

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

192 Supplying & erecting approved make low noise decorative exhaust fan 18.00 Ea. 1366.53

having square frame ABS body with inbuilt lowers & square frame. 200mm

with 1350 RPM Cat.II Ca-II ( Make :- Havells, Orient, Crompton, Bajaj )

193 Providing recess in wall or window frame suitable for erection of Exhaust fan 18.00 Ea. 189.88

complete with plastering and colour washing to match the colour of the wall

or window c0omplete with expanded metal in order to render the fitting in

accessible and the room water-proof.

194 Supplying and erecting approved make Octagonal pole made from HR 27.00 Ea. 6874.06

sheet steel. The pole should be made as per IS. and shall be coated with

hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local wind

speed with integral Junction box consist of terminal plate of min 6mm Hylam

sheet, standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type

terminal and arrangement for cable termination to be erected With Suitable

foundation (Included) as per details given by manufacturer considering site

requirement. (C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm

thickness with 200mmX200mmX12mm base plate, 4-M16 Bolts and

600mm long with necessary G.I. J Bolts .Approx Pole weight 46 kg

195 Supplying & erecting approved make SMC press moulded composite FRP. 10.00 Ea. 476.72

loop-in, loop-out approx. 2mm thick box complete with Bakelite connector

strip 5way(3P+N+E),DIN rail for mounting mob & hinged doors as per

requirement having locking arrangements with mounting clamp with nuts,

bolts & washers suitable for erection on pole with cable clamps& earth bolt

of following size of box. (c)150mm x 125mm x 100mm [deep]

196 Supplying and erecting Street light pole bracket comprising main B Class GI 21.00 Ea. 491.87

(a) pipe of 4.2 cm/require outside dia. complete with suitable B Class G.I.

sleeve tubing of approx. 45cms.length and suitable for

76.5mm/80mm/require size of pole top having nuts and bolts for fixing the

brackets and having spread of 0.5 mtr. Length with 110 deg.with vertical

plane and suitable welded stiffener reducer and nipple with check nut

complete painted with one coat.of Red oxide / PU base primer and two

coats of Aluminium / PU paint. paint with following nos of arms. [A] Single

Arm bracket 0.5 Mtr

196 [B] Double Arm Bracket 0.5 Mtr 6.00 Ea. 622.16

197 Supplying & erecting approved make IP 55 grade Company fabricated 2.00 Ea. 12399.77

Timer Panel of following capacity for switch On-Off street lights on time

scheduling basis made from 16G CRCA sheet duly epoxy power painted

inside and outside with hinged doors and locking arrangement consisting of

suitable size of 4 Pole MCB and 4 pole contactor (cat-III)with analog time

switch, auto manual switch of same make and suitable input and output

Bakelite terminals and with door earthing approved by Engineer in

charge.(A) 32 Amp

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

198 SITC of 3LCD Lamp based projector having wxga (1280x800) or better 1.00 Ea. 33895.60

resolution with minimum white brightness of 3800 lumens and color

brightness of 3800 lumens. The projector should have minimum

1HDMI,1VGA input. Having contrast ratio of 15000:1 or more. the projector

should have auto vertical key stone correction of +/- 30 degree and Manual

Horizontal of +/-30 degree. the projector should have optical lens, throw

ratio 1.30-1.56:1. Zoom Factor of 1.2. Lens focus Manual having focal

length 16.9mm to 20.28mm. projector should have features like AV mute

slide, quick corner and split function and should support wireless

functionality with inbuilt wifi or wifi dongle. [Approved by Competent

Authority i.e. not Below the rank of Executive Engineer ]

199 SITC of universal Projector mounting kit, with necessary grouting, fasteners 1.00 Ea. 6848.81

etc. with adjustable height and suitable for all types of projectors. [Approved

by Competent Authority i.e. not Below the rank of Executive Engineer ]

200 SITC of 100 inch Self Lock MW (7 x 5) Instalock Slow Retraction Screen, 1.00 Ea. 3810.73

Aspect Ratio-4:3 [Approved by Competent Authority i.e. not Below the rank

of Executive Engineer ]

201 Providing & erecting water cooler having storage capacity 150 Ltr. & cooling 3.00 Ea. 55893.40

capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of

the water should drop by 15˚C within a hour, The water cooler should be

comprising of hermetically sealed compressor, fan motor, condensing unit,

water tank surrounded by evaporating, coil, thermostats, relay etc.complete

with necessary inlet & outlet connection. The body of water cooler will be

made from Stainless Steel.(Make:usha,Blue star,voltas)

202 Supplying & erecting 5 stage single reverse osmosis water purification 3.00 Ea. 29187.99

system with M.S. powder coated frame, prefilter housing with 'O' ring

presediment filter GAC filter, carbon filter suitable buster DC pump capacity

80 psi, mention with 40 psi inline type post carbon filter auto low & high

pressure switches with following size of storage tank & LPH capacity &

erected as directed.[C] 50 Ltr / Hr with 150 psi 2 nos booster pump

203 Supplying and erecting approved make online Un-interruptible Power 2.00 Ea. 82941.20

Supply system comprising flat cum-boost charger with IGBT base rectifier &

Inverter & sealed maintenance free SMF batteries. The charger having

operating capacity for input 160-270V AC & inverter having output 230V,50

Hz Ac with 0.8 load power factor with battery, over/under voltage output

with over load & short circuit protection equipment. The system housed in

CRC sheet duly powder coated paint with following power backup.with MS

painted batteries stand, 10% Overload capacity for momentary load.(C)

KVA with 1Hr Backup

204 Supplying and erecting horizontal / vertical mounting type storage water 6.00 Ea. 9513.19

heater with copper container housed in M.S./S.S./ABS body insulated with

glass wool/puff complete with heating elements,adjustable thermostats

300C to 850C, indicating lamp, safety valve, fusible plug, etc.complete

erected with coach bolts, nuts. washers & cementation (B)15 Ltr-.with

/3K.W. heating element Premium Category (Make;

Recold,Jaguar,Spherhot,Havells)

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

205 Supplying and erecting approved make panel mounting type Digital 3.00 Ea. 1275.63

Voltmeter having 3 digits LED display, 0 to 750 AC Volts range erected on

existing panel board with all connection, wiring etc .with manufacturers

calibration certificate.

206 Supplying and erecting approved make panel mounting type Digital 3.00 Ea. 1558.43

Ammeter having 3 digits LED display, external CT operated, calibrated for

0 to 1000 Amps suitable to operate on 500 Volt AC , erected on existing

panel board with all connection, wiring etc .with manufacturers calibration

207 Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC 6.00 Ea. 317.14

Supply 500 V on existing panel board with necessary connections.

208 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 9.00 Ea. 274.72

1000/5 ratio 15 VA burden erected in existing CRCA box duly secured with

insulating materials connected to the meter

209 Supplying and erecting approved make suitable panel indicator LED type 9.00 Ea. 43.43

lamp, lens cover, complete erected with necessary connections.

210 Providing & erecting open well horizontal mono block pump set with cast 2.00 Ea. 18746.61

iron body, complete for three phase submersible motor having.[D] For 5 HP

3 phase open well horizontal mono block pump set suitable for 1350 LPM to

310 LPM @ 10 to 42 Mtr head suitable for 50/65 mm dia delivery pipe.Cat.II

(Make:Crompton,Lubi,Kirlosker)

211 Supplying & erecting approved make motor control cubical panel [Star 2.00 Ea. 7250.79

delta] made from 16G CRCA sheet duly epoxy powder painted inside and

outside with hinged doors and locking with suitable size of ON - OFF

isolator (AC 3 / 23 duty) main fuses. Digital volt and current meter (in a

single unit) with micro controller based control unit and current sensing

single phasing preventer electronic overload protection, over voltage

(Programmable) protection and under voltage (Programmable) protection,

prod less dry run protection programming facility for setting of all parameter

like overload current, high voltage limit, low voltage limit, dry run limit with

digital indication on seven segment LED display for any fault like over load,

high voltage, low voltage, dry running single crimped, electronic star delta

timer, feather touch start / stop push buttons to be erected on angle iron

frame. Grouted on wall the contactors will be of L& T, Siemens, BCH make

only)(A) DOL up to 5.0 H.P.

212 Lowering of submersible motor pump set at the depth of following ,complete 2.00 Ea. 856.48

with required. Nos. and size of casing pipes erected by means of proper

chain pulley block & pipe wrenches after checking of threads of each pipe

with coupling to take the load of the pump set and pipe assembly filled up

with water (D)For Open well Horizontal submersible pump set for sump

well (i) 1 HP to 5 HP

213 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat 40.00 Mtr. 104.03

flexible Submersible copper cable approved make of following Size.(B)

Core x 2.5 Sq. mm.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

214 Supplying of following size of HEAVY UPVC column pipe with coupler and 40.00 RMT. 359.56

wire lock.[B] 50 mm dia

Rs. Six crore eighty three lakh forty four thousand four hundred fifty nine rupees and seventy seven Paisa Only.

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for

which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix

design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

5. The Contractor will have to submit the mix design for different grades of cement concrete at his own cost before

execution as directed and to be approved from the Engineer in charge.

6. Dismantalled materials of amount of Rs. 802011.00 must be recovered from 1st R.A. bill of Contractor's.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and found

Executive Engineer

R & B Division,