Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.1 LAccepted-AOC T C 30 272 1 FIRST FLOOR PATTATHIL HOUSE PUTHENKALAM THRISSUR 680004 | THRISSUR | THRISSUR | KERALA | 680004 | ₹13.1 L Quoted ₹13.2 L | L1 | Accepted-AOC L1 Accepted for further proceedings |
| 2 | L2₹15.1 L+₹1.9 L (14.6%)Rejected-Finance | ₹15.1 L+₹1.9 L (14.6%) | L2 | Rejected-Finance L2 |
| 3 | L3₹15.2 L+₹2.1 L (15.7%)Rejected-Finance | ₹15.2 L+₹2.1 L (15.7%) | L3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | Namaste Innovations L1 | Invobuild Infratech Pvt Ltd. L2 | DIMEBAG SOLUTIONS PRIVATE LIMITED L3 |
|---|---|---|---|---|---|---|
| 1.00Aluminium partition | ||||||
| 1.01 | 21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 395.53 | kg | 530.34 ₹2,09,766.97 Lowest | 626 ₹2,47,603.66 | 631 ₹2,49,581.32 |
| 1.02 | 21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | 36.62 | kg | 613.72 ₹22,474.43 Lowest | 698 ₹25,560.76 | 709 ₹25,963.58 |
| 1.03 | 21.2.2 : Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides | 46.84 | sqm | 1,195.3 ₹55,987.85 Lowest | 1,380 ₹64,639.2 | 1,544 ₹72,320.96 |
| 1.04 | 21.3.1 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness | 46.84 | sqm | 1,022.75 ₹47,905.61 Lowest | 1,177 ₹55,130.68 | 1,251 ₹58,596.84 |
| 1.05 | od287625/2020_2021 : Providing and fixing Godrej Locks Heavy Duty Aluminum Hydraulic Alloy Door Closer (Silver), (Suitable for: right hand and left hand opening doors, mounting on door panel or door frame, door panel upto 900mm width, door opening upto 180 degree) | 4 | no | 2,835 ₹11,340 Lowest | 3,225 ₹12,900 | 3,470 ₹13,880 |
| 1.06 | 21.13 : Providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete | 4 | each | 495.17 ₹1,980.68 Lowest | 560 ₹2,240 | 596 ₹2,384 |
| 1.07 | 21.17 : Providing and fixing anodised aluminium grill ( anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment ). | 86.19 | kg | 563.93 ₹48,602.87 Lowest | 637 ₹54,900.48 | 668 ₹57,572.25 |
| 1.08 | 15.57 : Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge | 56.21 | sqm | 165.28 ₹9,290.22 Lowest | 187 ₹10,511.08 | 199 ₹11,185.59 |
| 2.00FINANCE SECTION | ||||||
Tender Value
₹13.1 L
EMD Value
₹19,632
Closing Date
22 Sept 2021, 11:00 amClosed
DEPUTY MANAGER (PEED)
STEEL INDUSTRIALS KERALA LTD. ATHANI P.O, THRISSUR- 680 581
Renovation of Office Room at 4th Floor NORKA ROOTS Center Thiruvananthapuram
2021_SILK_439512_1
SILK/PEED/S-3636/2021-22/481
Open Tender
Miscellaneous Works
Item Rate
30 days
Thiruvananthapuram
As per tender documents
6 documents required · 6 mandatory
₹2,950
₹19,632
Yes
28 Aug 2026
15 Sept 2021
23 Sept 2021
15 Sept 2021
22 Sept 2021
15 Sept 2021
15 Sept 2021 - 22 Sept 2021
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .