Loading
Loading…
Loading…
Tender Value
₹16.9 L
EMD Value
₹16,950
Closing Date
4 Aug 2026, 5:00 pmClosed
Municipal Commissioner, RMC
Rourkela Municipal Corporation, Rourkela
Electrical
2026_RMC_136861_2
MC/RMC/52/2026
Open Tender
Electrical Works
Percentage
Rourkela
Please refer Tender documents.
2 documents required · 2 mandatory
₹6,000
₹16,950
Yes
23 Jul 2026
23 Jul 2026
5 Aug 2026
23 Jul 2026
4 Aug 2026
23 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supply and erection of Galvanized Octagonal Pole shall be in single piece section. This shall not be any circumferential weld joint. The pole shall be hot dip galvanized as per the IS-2629/ IS-2633 / IS- 4759 standards with average coating thickness of 70 micron. The galvanizing shall be done in single dipping. The pole shall be bolted on a pre-cast foundation with a set of four foundation bolts for greater rigidity. The galvanized mounting decorative Sword type Double Armed Bracket with SS dome shall be supplied along with the poles for installation of the luminaries as per the design. | |||||
| 1.01 | The pole shall have door of approximate 500mm length at the elevation of 3000mm from the base plate. The door shall be vandal resistance and shall be weather proof to ensure safety of inside connection. The door shall be flush in one side with double hinge arrangement with the extension surface and shall have suitable locking arrangement with 4 pin Loop in Loop out system with 16 Amp. MCB and connector arrangement. There shall also be suitable arrangement for the purpose of earthing. The pole shall be adequately strengthened at the location of the door to compensate for the loss in section. The door should be in special locking arrangement to avoid theft of inside accessories (As per sample & direction of EIC) | - | - | - | - |
| 1.02 | Specification of the Pole: | - | - | - | - |
| 1.03 | Height of pole: 9 Mtrs. | - | - | - | - |
| 1.04 | Top of dia: (A/F)100 mm | - | - | - | - |
| 1.05 | Bottom of dia:(A/F)175 mm | - | - | - | - |
| 1.06 | Thickness of the Sheet: 03mm | - | - | - | - |
| 1.07 | Base plate dimensions: (LxBxT) 275mm x 275mm x 16mm | - | - | - | - |
| 1.08 | Foundation of Pole : Steel Grade EN-8 | - | - | - | - |
| 1.09 | J-Bolt size (no. x dia): 4 x 24mm | - | - | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.96 MB
BOQ_602992.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .