Work of Development of Shri Panchkuber Temple at Motikoral, Ta. Shinor, Dist: Vadodara

NAME OF WORK: DEVELOPMENT OF SHRI PANCHKUBER TEMPLE AT MOTIKORAL,TA. SHINOR, DIST :VADODARA

SR. No. Item Description Unit Quantity Rate Amount

Excavation for foundation up to 1.5 mt. depth including sorting out and stacking of useful

1 materials and disposing of the excavated stuff upto 50 mt. lead & lift etc. complete. (B) Dense and CUM 198.60 153.41

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of

2 useful materials and disposing off the excavated stuff upto 50 Meter lead. (B) Dense and CUM 175.30 166.44

Filling available excavated earth (excluding rock)in trenches, plinth,sides of foundations etc. in

3 layers not exceeding 20 cm. in depth consolidation each deposited layer by ramming and watering. CUM 234.21 133.65

Filling in foundation and plinth with murrum or selected soil in layers of 20 cm. Thickness

4 including watering ramming and consolidating etc. complete. Including all lead - lift. CUM 74.80 296.29

Providing and laying rubble soling in a compact manner, foundation, road, footpath etc. using

5 to 230 mm. cut size stones, covering and levelling the surface with a layer of murrum after filling CUM 35.10 1,961.42

the voids with smaller sized stones or stone chips, including all lead and lift.

Providing and laying cement concrete 1:3:6 (1- Cement : 3- coarse sand : 6- hand broken stone

6 aggregates 40 mmnominal size) and curing complete excluding cost of formwork in (A) Foundation CUM 27.10 3,080.90

Providing and laying controlled cement concrete M.200 and curing complete including the cost of

7 formwork and excluding reinforcement for reinforced concrete work in (C) For Grade Slab CUM 17.80 4,670.24

Providing laying controlled cement concrete M-250 work with curing complete including the cost

of form work and excluding the rate of reinforcment for reinforced concrete work in. Upto floor

( A ) Foundations footings Base of columns and mass concrete.

Providing laying controlled cement concrete M-250 work with curing complete including the cost

of form work and excluding the rate of reinforcment for reinforced concrete work in. Upto floor

( C ) Ground beams

Providing laying controlled cement concrete M-250 work with curing complete including the cost

of form work and excluding the rate of reinforcment for reinforced concrete work in. Upto floor

( D ) Column upto plinth level

Providing laying controlled cement concrete M-250 work with curing complete including the cost

of form work and excluding the rate of reinforcment for reinforced concrete work in.Upto floor

11 two level CUM 6.90 8,780.94

(D ) Columns, pillars posts and struts square,

rectangular, polygonal in plan

Providing laying controlled cement concrete M-250 work with curing complete including the cost

of form work and excluding the rate of reinforcment for reinforced concrete work in. Upto floor

( C ) Slabs, landing etc

Providing laying controlled cement concrete M-250 work with curing complete including the cost

of form work and excluding the rate of reinforcment for reinforced concrete work in. Upto floor

Providing laying controlled cement concrete M-250 work with curing complete including the cost

of form work and excluding the rate of reinforcment for reinforced concrete work in. Upto floor

( C ) Floor beams

Providing laying controlled cement concrete M-250 work with curing complete including the cost

of form work and excluding the rate of reinforcment for reinforced concrete work in. Upto floor

Providing & laying TMT bar reinforcement (ISI) FE 500D for RCC work including bending binding

and placing in position etc. complete upto any floor any level.

Brick work using common burnt clay building bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)

17 (B) Conventional CUM 13.50 4,121.55

Foundation and upto plinth level

NAME OF WORK: DEVELOPMENT OF SHRI PANCHKUBER TEMPLE AT MOTIKORAL,TA. SHINOR, DIST :VADODARA

SR. No. Item Description Unit Quantity Rate Amount

Brick work using common burnt clay building bricks having crushing strength not less than

kg./Sq.Cm. in superstructure above plinth level upto floor two level in Cement Mortar 1:6 (1-

18 Cement : 6 -fine sand) CUM 12.20 4,396.56

(B) Conventional

Above plinth level upto floor two level

Half brick masonry in common brunt clay building bricks having crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:3 ( 1-Cement : 3-coarse sand ) with 2 Nos of 6mm Mild steel round

bars after every three course embedded in Cement Mortar in superstructure above plinth level

upto floor two level.

(B) Conventional

Above plinth level upto floor two level

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick

walls for interior plastering upto floor two level and finished even and smooth in (i) Cement

mortar 1:3 (1- cement:3-sand)

Providing 10mm thick cement plaster in single coat on ceiling surface / Sloping roof /

brick/concrete walls for interior plastering upto floor two level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement:3-sand) including floating coat of neat cement slurry and curing,

scaffolding, in true line and level etc. complete as directed by Engineer in Charge.

Providing & laying 20 mm thick double coat mala cement plaster on walls height up to 10mt.

interior and exterior brick / concrete work for plastering comprising of base coat of 12 mm thick

22 cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top SQM 117.70 277.18

coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including scaffolding

curing etc. complete.

23 Providing & laying throating or plaster drip and moulding to R.C.C. chhajja. RMT 11.20 42.02

Providing & laying cement vata (10 cm x 10 cm size ) quartar round in cement mortar 1:1 including

neat cement finishing watering etc. complete.

Applying two coats of acrylic lappy (putty) and two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including thoroughly brushing the surface

free from mortar dropping and other foreign matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on

undecorated wall surface to give an even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an

27 required shape even shade after thoroughly brushing the surface to remove all dirt, and remains SQM 510.90 117.40

of loose powdered materials.etc complete

Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm / 300 mm x

28 mm x 8 mm in skirting, risers of steps and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 SQM 138.70 1,452.79

coarse sand) & jointed with white cement slurry.

Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and landing laid on a bed

29 of 12mm thick cement mortar 1:3 (1-cement : 3- coarse sand ) finishing with flush pointing in white SQM 31.70 981.57

Providing and laying polished Granite stone slab 18-20mm thick in floor, risers of steps,skirting

Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed

with gray cement slury mixed with pigment to match the shade of slab including rubbing and

30 polishing etc. complete. all complete as specified and as directed by the Engineer-in-Charge and as SQM 21.50 2,654.28

per architectural detail drawing. Polished Granite stone slab Jet Black, Cherry Red, Elite,

Brown,Telephone Black, Cat Eye or equivalent.

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement

mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and

31 jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing SQM 104.10 1,001.14

and polishing etc. complete. (A) 25mm thick

Providing and laying Manglor tiles on roofing laid on a bed of 40mm thick cement mortar 1:3 (1-

32 cement : 3- coarse sand ) with waterproofing material finishing with flush pointing in white SQM 178.30 948.39

NAME OF WORK: DEVELOPMENT OF SHRI PANCHKUBER TEMPLE AT MOTIKORAL,TA. SHINOR, DIST :VADODARA

SR. No. Item Description Unit Quantity Rate Amount

Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x

mm(Section no:4605, @ Wt 1.094Kg / Rmt with colour anodized alluminium frame with 5 mm thick

33 transparent bronze colour tinted float glass with colour anodized alluminium frame for ventilation SQM 2.20 1,301.82

with 5 mm thick frosted glass as details etc complete for Ventilation.

Provoding and fixing flush door shutters, solid core construction with frame of first class hardwood

with cross board and face veneer or plywood face panels, including butt SS hinges with necessary

34 screws, laminate bothsides, teakwood beading patti on door periphery, SS Handle, Door Stoper SQM 6.30 4,318.76

etc. (B) Non-decorative type and block board core anodised alluminium butt hinges in flush door

shutters (2) 35 mm thick.

Providing and fixing 30mm thick FACTORY MADE SOLID BOTH SIDE PRELAM PANEL PVC DOOR

SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x

19mm for stiles, top and bottom rails. M.S. frame shall have a coat of steel primer of approved

makde and manufactures. M.S frame covered with 5mm thick heat moulded prelim PVC ‘C’

channel of siz 30mm thickness, 70 mm width of which 50mm shall be flat and 20mm shall be

tapered in 45 degree Angle on either side forming stiles, and 5mm thick, 95mm wide pream PVC

sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side ot

form top and bottom rail and 115mm wide prelim PVc sheet out of which 75nmm shall be flat and

20mm shall be tapered on both side to form lock rail, Top, bottom and lock rails shall be provided

either side of the panel. 10mm (5mm x 2) thick 20mm wide cross PVC sheet shall be provided as

gap insert for top rail and bottom rails. Panelling of 5mm thck both side prelim PVC sheet to be

fitted in the M.S. frame welded,sealed to the stiles and rails with 7mm (5mm + 2 mm) thick x

15mm wide PVC sheet beading on inner side, and joined togeth with solvent cement adhesive. An

additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C” chanel

using PVC solvent adhesive etc. complete as per direction of Engineering in charge, manufacture’s

specification and rawing.

Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm broken pieces

of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring

mortar creme out upto surface using white cement including rounding off junctions and extending

36 them upto 15 cm along the wall,clearing with water and oxalic acid etc. as directed. providing and SQM 37.10 815.38

mixing wter proofing materials in cement mortar in proportion recommended by the

manufacturer and providing and laying cement flooring 1:2:4 (1-cement: 2-coarse sand: 4-graded

stone aggrefate 20mm nominal size) laid in one layer (B) 50mm thick

Carring out plinth treatment to post construction / existing structure by spraying chemical solution

for termite control treatment including labour and material consistment with I.S.I specification.

Using Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight one percent

37 is recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 % concrentration SQM 141.20 98.82

inclusive of one litre chemical emulsion appication at the rate of 5 Litre chemical / Sqm of surface

is recommended as per I.S

Provding C.I.100mm diameter water spouts including necessary iron gratings as per drawings.

Providing and fixing Sandwiched granite and kota as Kitchen platform, pantry, Basin counter of

width 0.60 to 0.70 m with 18mm thick granite of approved color + 30mm Cm in 1:4 + 20mm kotah

stone one side polished in one piece for kitchen / platform. The joint shall be filled with white

cement with pigments to match the color of the stone. The cutouts for Kitchen sink if required

39 shall be provided as per drawing. The platform shall be supported on pair of polished kotah stone SQM 0.90 4,776.29

@ 0.75 to 0.90 m c/c filled with cement slurry. It shall include facia. The facia and other edges shall

be duly chamfered / rounded as per drawing. The stone shall be of one shade only and different

shades if found will be rejected, finished sizes shall be measured & paid for.as directed complete

as per detailed drawings & directed by E.I.C.

Providing & fixing in position 18 mm thick mirror polished Z black granite slab for Urinal partitions

machine cut, 120 cm high x 60 cm deep, rubbed and polished with edges, corners, rounded off

including making necessary chases in the walls and fixing the same with cement concrete 1 : 2 : 4 (

1 cement : 2 coarse sand : 4 graded stone aggregate of 6 mm nominal size) and finished smooth

with white cement with mixed with pigment to match the shade.

Providing and fixing wash down water closet (European type, W.C. Pan) with integral P or S trap

including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and

cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in white colour

NAME OF WORK: DEVELOPMENT OF SHRI PANCHKUBER TEMPLE AT MOTIKORAL,TA. SHINOR, DIST :VADODARA

SR. No. Item Description Unit Quantity Rate Amount

Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm (Earthwork, bed

42 concrete, foot reste and trap to be measured and paid for separately) (A) Vitreous China.(I) Long EACH 2.00 971.79

pattern = White colour

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted

white including sutting holes and making good the same but excluding fittings.(A) Vitreous China:

(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour.

Providing and fixing Urinal of approved quality including connection with trap and with integral

44 longitudinal flush pipe.(A) Squating plate pattern white earthenware 550mm x 300mm. EACH 4.00 1,596.28

Providing and fixing plastic seat and cover for wash down water closer with C.P. brass hinges and

rubber buffers. (B) plastic seal and cover.

Health Fauset Heavy duty with hook with fitting

Providing and fixing 12.5 Litres low level flushing cistern with a pair, of C.I. or Mild brackets,

complete with fittings such as lead valve less syphon, 15mm nom.nal size brass ball valve with

polythene float, C.P brass handle unions and couplings for connections, with inlet, outlet and

47 overflow pipes, 40mm dia. porcelain enamelled flush bend including cutting holes in walls and EACH 3.00 2,370.39

making good the same connecting the flush bend with cistern and closet (overflow pipe to be

measured and paid for separately) (A) Vitreous China (I) In white colour

C.P. Angle stop cock 15 mm Heavy duty with cap All other materials and labour to complete the

work will be by contractors.

Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws down

Bib Tap. (i) 15mm dia.

Providing and fixing C.P. brass waste for wash basin or sink. (A) 32mmdia.

Providing and fixing 100mm size P or S trap for water closet squatting pan including jointing

51 thetrap with the pan and soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand)(A) Vitreous EACH 5.00 337.52

Providing and fixing chromium plated, bottle trap with necessary couplings of approved quality for

Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing

in pipe line etc. complete. All other materials and labour to complete the work will be by

contractors. (Flush valves / flushing systems paid separately)(i) 20mm dia.

Providing and fixing toilet paper holder.(A) C.P. Brass

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm

55 thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws and washers. EACH 3.00 854.58

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube

fittings and clamps including making good the wall, ceiling and floor etc. complete. [B] 20 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube

fittings and clamps including making good the wall, ceiling and floor etc. complete. [C] 25 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube

fittings and clamps including making good the wall, ceiling and floor etc. complete. [D] 32mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube

fittings and clamps including making good the wall, ceiling and floor etc. complete. [E] 40mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube

fittings and clamps including making good the wall, ceiling and floor etc. complete. [F] 50mm.

NAME OF WORK: DEVELOPMENT OF SHRI PANCHKUBER TEMPLE AT MOTIKORAL,TA. SHINOR, DIST :VADODARA

SR. No. Item Description Unit Quantity Rate Amount

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help

61 of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. RMT 20.00 148.12

including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help

62 of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. RMT 10.00 195.67

including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

mm nominal bore

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 50 mm

nominal bore Horizontal

Providing and fixing ball cock of approved. Quality as directed.(B) Abonite (ii) 50mm dia.

Providing erecting and fixing double coated ISI water tank of required capacity each with all

67 necessary fittings and connection etc. complete on terrace. (1000 Litre x 2 Nos) LITRE 2,000.00 3.95

Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less than 35Kg.

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm

diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the

70 following nominal diameter of self cleansing design with C.I scread down or hinged grating EACH 7.00 572.32

including the cost of cutting and making good the walls.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of

the following outside Dia. Low densidy, complete with special falnge compression type fittings,

wall clipsetc. including making good the wall ceiling and floor.(D) 40mm

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I.

72 cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps.(B) EACH 3.00 1,246.92

150mm x 100mm size P or R type

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes

73 I.S. class NP2 of the following internal diameter with collars and butt ends prepared for collar RMT 10.00 254.89

joints including testing of joints complete.(B) 150mm

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes

74 I.S. class NP2 of the following internal diameter with collars and butt ends prepared for collar RMT 10.00 356.73

joints including testing of joints complete.(C) 250mm

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone

aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick

bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1:3 (1-Cement : 3-coarse

sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4

mix (1- Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete

including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover

with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt.

of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick

having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse

sand) (2) B type depth 1.50 Metre for 150mm diameter sewer.

Construction of a soak well of size 1.50 m Diameter and 2.40 m Deep. as per the approved

76 drawing & design etc.in all sort of soil complete as directed and approved by engineer incharge. NOS 1.00 24,884.38

NAME OF WORK: DEVELOPMENT OF SHRI PANCHKUBER TEMPLE AT MOTIKORAL,TA. SHINOR, DIST :VADODARA

SR. No. Item Description Unit Quantity Rate Amount

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity

of following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered

42 with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, NOS 25.00 499.95

with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (f) with medium class Rigid

PVC pipe and accessories erected concealed in wall/ceiling complete. cat III.

Point wiring for secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires, in below type of pipe

to be erected complete with earth continuity and necessary connection with primary light with

accessories erected on Metal / PVC / wooden box covered with 3 mm thick PC(Polycarbonate) /

Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling rose /

H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary Point. (f)

with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete.

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of .ISI marked

1.1 KV Grade FRLS PVC insulated multistrand copper wires, in below type of pipe erected with 6A

Modular type switch and hum free EME four or more step type electronic fan regulator with

separately mounted and accessories with earth continuity of following type erected on PVC /

44 Metallic/Wooden box, single mounting base frame covered with textured/metallic front plate NOS 4.00 701.95

modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete. cat III.

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC

/ Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front

plate modules erected on / in wall / ceiling with following type accessories. cat III.

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box

46 covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected NOS 10.00 528.23

with following type of accessories. [I] For 6A Plug with 2-1.5 sq.mm Cu. Wire.(f) with medium class

Rigid PVC pipe and accessories erected concealed in wall/ceiling complete. cat III.

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multistrand copper wires, in below type of pipe erected complete

with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with

47 appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following NOS 10.00 780.73

type of accessories. [II] For 16A Plug with 2-2.5 sq.mm Cu. Wire. (f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling complete. cat III.

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multistrand copper wires, in below type of pipe erected complete

with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following

type of accessories. [III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm (

green) earthing wire from mcb d b board.. (f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete. cat III.

Providing & erecting Switch board for Computer or electric apparatus consisting of following

modular type accessories mounted with PVC / Metallic concealed/open box with single mounting

base frame covered with textured/metallic /white front plate,modules erected with necessary

49 connections as directed NOS 10.00 1,274.62

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug . For Modular Type Accessories. Cat III.

SITC of Face Plate - Single (Keystone Jack,square) (Including Five year free maintenance with

NAME OF WORK: DEVELOPMENT OF SHRI PANCHKUBER TEMPLE AT MOTIKORAL,TA. SHINOR, DIST :VADODARA

SR. No. Item Description Unit Quantity Rate Amount

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box,

single mounting base frame covered with textured / metallic/white front plate , modules erected

51 with necessary connections as per site situation directed by Engineer In charge. (3) Two Pin/RJ-11 NOS 10.00 235.33

Telephone Socket. [B] For Two Gang. Cat III.

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be

erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with

adhesive solution & Clamps with following dia of pipes, in approved manner as directed. (a)

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be

erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with

adhesive solution & Clamps with following dia of pipes, in approved manner as directed. (b)

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be

erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with

adhesive solution & Clamps with following dia of pipes, in approved manner as directed. (c)

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes,

Check-nuts etc. complete of following sizes. (1) 20 mm.

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes,

Check-nuts etc. complete of following sizes. (2) 25 mm.

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes,

Check-nuts etc. complete of following sizes. (3) 32 mm.

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

58 conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size MTR 425.00 90.90

(a) with medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm.

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS

59 PVC insulated stranded wire of green colour for earth continuity of following size (A) with medium MTR 100.00 124.23

class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm.

Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star rated, Ceiling fan

with Brush Less Direct Current (BLDC) permanent ferrite magnet Motor, class of insulation: B, Rust

free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit with earthing provision, copper winding,

Power factor not < 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM,

350 RPM,230v (tolerance as per IS : 374-2019), THD < 10%, with remote unit for Speed Control and

all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C

(Max.), suitable for 140 to 285 Voltage and rectifier circuit with surge, over current and overload

protection , 50 Hz, Single phase AC Supply, earthing etc. Complete as required. [ Make shall be

approved by Engineer in Charge] .

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly

61 painted for fan complete with proper insulation without leckage and earthing. MTR 4.00 126.25

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up to

62 50mm length each side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box complete NOS 4.00 126.25

erected concealed in Ceiling with necessary finishing.

Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty

63 ring mounted low noise operation suitable for medium duty having following dia size and NOS 2.00 4,646.00

maximum speed in RPM [E] 450 mm dia 1400 RPM.

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having

10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity. - use for

(A) 6 to 32 Amp. cat III.

Sheets steel powder coated enclosure suitable for incorporating One/Two nos. MCB. - use for AC

NAME OF WORK: DEVELOPMENT OF SHRI PANCHKUBER TEMPLE AT MOTIKORAL,TA. SHINOR, DIST :VADODARA

SR. No. Item Description Unit Quantity Rate Amount

Supplying & erecting in earthpit of minimum bore dia. 225mm size ASH or approved make Safe

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of

mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic

66 value surrounded by highly conductive compound with high charge dissipation suitable for NOS 1.00 8,370.88

following type of applications. [B] For Electrical installation up to 11 KV located in other than

normal soil i.e. Soft Rock, Marshy Soil etc. -Length of Pipe : 2 mtr, -Back filling Compound :1 no.

67 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. KG 10.00 937.28

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/

ACB/ Transformer LT panel board, Motors etc. using proper clamp.

69 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. KG 10.00 90.90

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to

IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance

with diffuser housed in aluminium casted body with company mark/name 160V to 270V,Power

Factor more than 0.9, THD < 15 %,, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt

70 LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description NOS 20.00 989.80

have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.). (A) Square/ Circular shaped Surface/Recessed

Mount Downlight with provision for spring loaded mounting clips complete.IP20. (iv) 22-24 watts,

Tender Value In Words

Rupees Thirty-Eight Lakhs Ninety-one Thousand Seven Hundred Forty-two rupees and Seventy Paise Only

I/We am/are willing to carry out the work at…% above/below percent (Should be wriƩen in figures and words) of the estimated rate mentioned above.

Amount of my /our tender works out as under.

Estimated amount put to tender

Estimated amount put to tender

Add…........% above

Deduct…........% below

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C,Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of

difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender