SPL REPAIR IN BLOCK NO 2 OF AR RC AT NAINITAL STN UNDER GE RANIKHET

Amount

BOQ/Sch 'A' B/R portion Dismantling plain or corrugated steel sheeting, any gauge, thickness as in roof coverings.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section in any position as in framed work complete all as specified and directed.

M&L for 25mm 2nd class hardwood Boarding, supplied & fixed with nails in any situation (except flooring and skirting)

Fixing only second class hardwood boarding of any thickness complete all as specified and directed . ( Note :- Old boarding shall be obtaind from item No - 02 above)

M&L for second class hardwood (wrought) in scantling for woodn truss and boarding complete as specified and directed

Fixing only second class hardwood (wrought) in scantling for woodn truss and boarding complete as specified and directed ( Note :- Timber shall be obtaind from item No -03 above)

S&F prepainted aluminium zinc steel sheet (galvalume base) or thinknee 0.50mm having tensile strength of 550 MPA , in colour and profile as apporved by GE and to be facotry moulded as in roof covering /cladding and fixed with hot dipped galvanished with high durable protective triple coated self tapping screws /self drilling serews, to suit the roofing in customized colour matching with the colour of roofing and screws are to be fixed using torque adjustable electronic gun screws drills of suitable capacity complete all as specified

S&F Pre-painted galvatume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to waall , fixed self tapping screws complete all as specified and directed.

Dismantling floor, hearth , wall tiling including taking down plastering in cement mortor removing serviceable tiles to store and rubbish off the premises

M&L Virified tiles 8 to 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and hite or coloured cement to match not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match as in floor etc , all as specified.

-ditto- all as per item ser No …. above here-in-before but in skirting/dado or verticle surfaces with back coat of screed bed or bedding layer of 10 mm thick 1:4 and pointed in white or coloured cement to match complete all as specified.

M&L Joint free Non - skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified.

M&L Glazed coloured ceramic tiles in verticle surfaces 450 x 350 x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match with backcoat of screed bed or bedding layer 10mm thick 1:4 and pointed in white or coloured cement to match complete all as specified..

Demolition of brick work built in cement mortar all as specified

Material & Labour for brick work with sub class `B’ bricks, straight on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) any thickness, including cover fillets but without frame work.

Supply & fixing of powder coated GI snap grid frame work for false ceiling comprising of the following sections for making partitions of 605x605 mm size fixed to walls with rawl plugs & screws and hanged to roof with and including 2mm dia GI wire suspender of suitable length and butterfly clips, size of main tee shall be 37mmx24mmx0.3 mm thick , cross tee shall be 28mmx24mmx0.3mm thick and wall angle shall be 24mmx24mmx0.3 mm thick complete all as specified and directed.

Supply & fixing 4mm thick non asbestos E-board classic cememt building board for insulation and accoustic purpose, 600 x 600 mm size fixed with staples on snap grid as in ceiling complete all as specified and directed.

Supply & fixing pvc panelling made up of pvc hollow panels 25/30cm in width and 10cm thickness interlocking pattern of approved shed and design,fixed to wall for ceilling all as per the manufacturer instruction,fixed in repair ceiling complete all as specified and directed.

Taking down chowkats or frames exc 1.50 sqm but n.exc 4.00sqm each with shutters (without taking off shutters from the frames) complete..

Supply and Fixed Pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges ,lock stike plate etc, size 105 X 60 mm complete as specified.

M&L providing cement concrete (1:3:6) type C1 for filling in pressed steel frames and other similar items etc complete.

S&F 30mm thick Flush shutters with/without peep hole/vision panel, solid core construction, with block board core and plywood face panels, commercial type on both sides, both face are covered with decorative face veneer with lipping/frame to match all as specified and directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC Sheet rainforced with MS square tube all as specified.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame work made out of MS tubes for top or bottom rail MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheets for trip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to stiles and rail with suitable PVC sheets beading and jointed together with solvent cement supplying and fixing in the frame at site as specified in cluase No 8.2.1 B.of SSR Part-II 2004 all as specified and directed.

S&F 150mm Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed

S & F 250 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed

S&F 150 mm long Extruded brass handles, fabricated type polished

S&F in repair 150 mm floor door stopper of brass body and tonuge ,anodised, with hard drawn steel spring fixed in floor.

Supply & fixing Butt hinges, extruded brass, with mild steel hinge pin, bright pol ished and fixed, type B-11 of 100mm long complete all as specified and directed.

S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section

S&F 150 mm long aluminium handles cast type anodised.

S&F Door closer (Aluminium extruded body) hydrau lically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

Taking down chowkats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete.

S&F three track aluminium powder coated sliding window with three sliding shutter, the size of outer frame three track 100 x 37 x 1.50mm (using two track for glazed window shutter and one track for wire gauged), the section shutter size 37 x 18 x 1.2mm) and glazing with 5 mm thick transparency glass of poly carbone including all around suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed on aluminium flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers sliding rollers of nylon with including all necessary fittings complete all as specified and directed.

S&F 20mm Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc all as specified and directed

Taking up or down GI Water Tubing 15mm dia (bore) including Connections and Fittings, segregating serviceable Pipes & Fittings and Stacking properly at Site(s) for re-use, complete all as specified and as directed.

All as per Item No. 38 here–in–before, but for 20mm dia (Bore).

All as per Item No. 38 here–in–before, but for 25mm dia (Bore).

Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

All as per Item No. 41 here–in–before, but for 20mm dia (Bore).

All as per Item No. 41 here–in–before, but for 25mm dia (Bore).

S&F in repair 15mm dia bib taps CP Brass with Capstanhead, screwed down, screwed for iron pipe of bore 15mm complete.

S&F in repair 15mm dia bib taps, fancy type long body chromium plated cast copper alloy with crutch or butterfly handle complete all as specified and directed. Make- Jaquar or equivalent

S&F in repair brass Chromium plated Basin Mixer valve hot and cold screwed down for iron pipe complete . Make- Jaquar or equivalent

S&F in repair Brass CP Wall mixer for mixing hot & cold water (3 in 1) screwed down for iron pipe and fixed bore of pipe 15mm complete all as specified . Make- Jaquar or equivalent

S&F in repair Stop valves,15mm fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed Make- Jaquar or equivalent

S&F in repair Angle Cock,15mm fancy type (2 in 1 type where required), chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. Make- Jaquar or equivalent

S&F in repair Brass chromium plated shower rose 125mm size with shower arm, including fixing to steel pipe or union complete all as specified and directed. Make- Jaquar or equivalent

Supply& Fixing Soap Dish CP Brass complete all as specified & directed. Make : Prayag or equivalent as approved by Engr-in-Charge Make- Jaquar or equivalent

S&F in repair toilet paper holder with flat recessed type stainless steel complete all as specified and as directed Make- Jaquar or equivalent

Supply & Fixing Corner Glass Shelf 300mm (with ABS Brackets) 300 x 600mm complete all as specified & directed. Make- Jaquar or equivalent

Supply& Fixing in repair tubular towel Rail CP Brass, chromium plated D type with CP Brackets, 600 mm long between flanges all as specified.

S&F one piece floor mounted vitreous china EWC with integrated flushing cistern, soft closing seat cover with provn of Jet, chromium plated with length not less than 1.0 mtr long flexible tube, P/S trap and necessary nut/bolt for fixing complete all as specified and as directed by Engr-in-Charge Make- Jaquar or equivalent

Supply & fix in repair Health faucet Brass chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified as approved by the GE. Make- Jaquar or equivalent

S&F in repair wash hand basin of vitreous china white flat back size 580mm x 450mm, PVC waste pipe 32mm dia, waste coupling brass chromium plated and including cutting complete all as specified and directed.

S & F in repair Stainless Steel grating 100mm dia complete all as specified.

S&F in repair PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.

S&F in repair PVC Connections 600mm long complete all as specified.

Taking down cement plaster on brick or stone walls etc raking out joints hacking for key scrabbing down water etc including taking out/removal of the all the tree routes from the brick surface/concrete surface complete all as directed. Note : Rate should be deemed included in the said items in the item rate.

Material and labour for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces using WPC where ever required as per manufacturerer's instructions and finishing the surface even and smooth (without using extra cement) etc. incl finishing even and fair complete all as specified NOTE -WPC shall be measured and paid separetely.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and fair without using extra cement complete.

Supply only WPC complete all as specified and directed.

M&L for applying two coats of synthetic eneamel painting over a coat of pink primer on new wooden surfaces exc 10 cm width or girth including preparation of surfaces complete.

M&L for Preparing newly plastered surfaces and applying two coat of oil bound distemper over a coat of primer to wall to complete all as specified and as directed,

Material & Labour for preparation of newly plastered surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over any surfaces. Makes :- Nerolac -Excel, Asian - Apex, Berger - Weather coat antidust, Dulux - Weather shield.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, drop ends swan-necks etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories)

S&F Mild steel sheet eaves gutters thickness of sheet 1 mm and dia 100mm, galvanised class 3, half round with rounded edge including brackets, heads, shoes, bends, drop ends swan-necks etc etc complete all as specified and directed by Engineer-in-Charge.

S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge.

S&F 110mm PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-Charge.

M&L for 25 mm thick PCC 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in levelling course complete where required all as specified and as directed .

Disconnecting existing tank of capacity exc 500 but n.exc 1000 ltrssetting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)

Dismantling water tanks of capacity exc 500 but n.exc 1000ltrs complete.

Supply & Fixing rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion 1000 ltrs capacity with and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.

BOQ/Sch 'A' E/M portion Taking down carefully aluminium/copper wiring of any size (for light, fan, socket or power etc complete) including fixture and fittings such as switches, sockets, ceiling roses, pendent holders regulators, tube lights etc and making good disturbed surfaces of wall, roof etc to match with existing surface.

M & L point wiring for modular fittings for one light point/ fan/bell/ 5Amps socket out let (independent) point controlled by one, one way switch with 1.5Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia ) with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) including modular metal flush box for mounting modular fittings and covered with modular cover plate with frame and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor cable earth wire and connected to earth dolly complete all as specified and directed Note:- wiring shall be done in colour coding as directed by Engineer in charge.

All as per item No. 77 erein before but one socket outlet 5 Amps on the same board.

All as per item No. 77 herein before but one 3 pin socket outlet 5 Amps independent.

All as per item No. 77 herein before but one bell point controlled by one bell push switch.

All as per item No. 77 above but with 2.5 Sq mm two single core and 2.5 Sq mm one single core as earth wire for 15 Amps socket.

All as per item No. 77 above but with 4.0 Sq mm two single core and 4.0 Sq mm one single core as earth wire forGyser Point.

Supply and fixing of following rating of modular type ,white polycarbonate,switches, sockets, fan regulator suitable for 250V, AC, 50Hz.Electrical supply and as directed by Engr-in-Charge. (a) 6 Amp on way switch, 1 module

All as per item No 83 herein before but 6 Amp 2/3 Pin Combined socket shuttered, 2 module

All as per item No 83 herein before but Modular Switch 1 way 16 Amp, 1 Module

All as per item No 83 herein before but Modular socket 6A/16Amp, 2/3 pin combined, 2 Module

All as per item No 83 herein before but 6 Amp bell push switch modular type

Supply and fixing of following sizes of modular front plates, white with frame on existing boxes complete as required. (a) 2 Module

All as per item No 88 herein before but 3 Module

All as per item No 88 herein before but 4 Module

All as per item No 88 herein before but 6 Module

All as per item No 88 herein before but 8 Module

Supply and fixing anodised rust proof 18 SWG MS box, flush type of following sizes (to be of same make as modular switches and sockets) to be recessed in wall /gypsum partition complete as required :- (a)75mm x 105mm x 50mm deep (1-2 Module)

All as per item No 93 herein before but 75mm x 105mm x 50mm deep (3 Module)

All as per item No 93 herein before but 75mm x 105mm x 50mm deep (4 Module)

All as per item No 93 herein before but 75mm x 210mm x 50mm deep (6-8 Module)

Supply and fixing bell electric multi musical type AC 230 volts, 50 Hz.

Material and labour for Sub main wiring with 2 run of 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to and including Rigid non metallic PVC conduit ( ISI marked) Heavy grade, 20 mm dia (external) inclusive of junction/terminal boxes, all fittings and accessories fixed concealed with and including 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc including taking down existing old sub main wiring complete all as specified. Note :1 The cost of earth wire is included in the quoated rates. 2. Two run of 6 sqmm, one run of 6 sqmm and one run of PVC conduit will be measured as one unit ie one running metre”

S&F ceiling rose surface bakelite 3 terminal with base plate.

Supply and fixing LED lights fitting 1x 20W (warm/milky white as required on site), 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and life of tube light not less than 50,000 hours.complete all as specified and directed.. Make Havells cat pat LUMILINEBS20WLED865SPCWH or equivalent of phillips/wippro/Bajaj/Surya complete Note:- LED tube light shall be purches to get minimum 2 year warrenty of material from manufracturer.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible opper conductor cable of suitable size complete

S&F lamp holder (modular type) PVC insulated body with back plate for angle/battern fitting with and including one No 10 watt LED lamp all as specified and directed.

S&F Bed side lamp with 10 watt LED lamp

S&F Polycarbonate D.P. switch with Pc Key ring Tag 2 Module,white,32 Amp,240 volts

Supply & Fixing sheet metal enclosure for VTPN DBs ( Vertical double door type)Triple pole and neutral 8 way including blanking plate as required with 200 Amps rated bus bar, 415 volts fixed complete all as specified and directed .

S&F MCCB 63 Amp,415 volts,16 ka,4 pole

Supply & Fixing sheet metal enclosure for SPN DBs (double door type) Single pole and neutral 12 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

Supply & Fixing sheet metal enclosure for SPN DBs (double door type) Single pole and neutral 8 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

Supply & Fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 Amp and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed .

Supply & Fixing 240V, 10KA 'B' curve miniature circuit breaker (MCB) of single pole 5 to 32 Amp and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed .

Supply and Fixing propeller type AC ventilating fans 230 volts, 50 C/S heavy duty 1200 RPM, 300 mm sweep (Exhaust fan) made of sturdy Engineering plastic complete with louvers shutter, and including PVC insulated three core white 23/.0076 copper cable, rubber insulated from ceiling rose to exhaust fan motor complete all as specified and directed.

M&L for servicing of water heater (Geyser) upto 50 Ltr capacity of any make by cleaning sludge and slurry, calcium inside inner water storage tank and make the geyser in operational condition all as specified and directed. Comprising of the following works :- (i) Rectifying water leakage in inner copper/iron storage tank by using welding (ii) Replacement of heating element upto 2000 Watt. (iii) Replacement of Thermostat of suitable size as required on site. (iv) Checking & tightening the electrical connection

Taking down by disconnectining exixting electric meter and refixing including nacessary connection upto 25 amps

S&F sheet metal enclosure with socket plug top and MCB single pole and netural enclosure with a two pin and earth plug and socket complete with one double pole MCB 20 Amp 240 Volts complete.

SS Construction Co (BID ID -3353494)

M/S S R Construction (BID ID -3354257)

Ramsons (BID ID -3353386)

M/S NAYAL ELECTRICALS (BID ID -3354259)

SATISH KUMAR SINGH (BID ID -3352800)

AEGIS INTERNATIONAL (BID ID -3354852)

M/S BHATT ENTERPRISES (BID ID -3352577)

KUMAON VALLEY CONSTRUCTION (BID ID -3354827)