CA NO. CWE BLY/GE(W)/21 OF 2021-2022 PROVN OF 05 X COVERED SQUAD POST WITH SHED AT JRC BAREILLY UNDER GE (WEST) BAREILLY

Amount

Excavation in post holes (or similar holes ) each n exc 0.5 Cum and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm, watering and removing surplus soil to a distance not exc 50m and making good disturbed surfaces surface in soft and loose soil complete all as specified and directed.

Surface excavation n. exc 30cm deep and averaging 15cm deep in soft/loose soil and getting out complete all as specified and directed.

Add to (or deduct from) srl item No 2.00 for every 3 cm or part thereof above or below 15cm average depth in soft/loose soil complete all as specified and directed.

M&L for PCC 1:3:6 mix, type C-2, (using 40mm graded stone aggregates ) in foundation, filling and mass concrete complete all as specified and directed.

Returning, filling in including spreading, levelling and well ramming in layers not exceeding 25 cm in each layer as in soil complete all as specified and directed.

Removing excavated material to distance exc.250m but not exc 500m and depositing where directed complete all as specified and directed.

M&L for rolled mild steel work conforming to Fe 410-W (Gde E-250 quality-B, of joist, channels, angles, tee sections or tubular sections, fixed independently as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and post/stanchions fixed with gusset plates etc complete all as specified and directed.

S&F rolled mild steel work conforming to Fe 410W (Gde E-250) quality-B as in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridges, roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint to surfaces of steel exceeding 10cm width or girth over a coat of red oxide Primer including preparation of new surfaces complete all as specified and directed.

M&L brick work with sub class 'B' fly ash bricks straight or curved on plan exc 6 m mean radius built in cm (1:6) complete all as specified and directed

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finished the surfaces even and smooth without using extra cement complete all as specified and directed

-Ditto- alll as srl item No 13 above but on other than fair faces of brick or concrete surfaces complete all as specified and directed

M&L for green marble work 18 to 20mm thick (table rubbed & polished) in treads & risers of steps, jambs, pillars, window cills, cooking platforms, wall lining, urinal partitions and like in CM (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of marble including providing edge moulding to stone where directed including machine polishing to achieve high polish complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M & L for hard core of gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface using broken stones or boulders complete all as specified and directed.

M & L for 75mm thick Plain Cement Concrete, type D-2, 1:4:8 mix (using 40 mm graded stone aggregates) as in sub base complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 mix, type B-2 (using 40mm graded stone aggregates) as in flooring and finishing the cement concrete surfaces without using extra cement and making impressions of expanded metal whilst the concrete is green complete all as specified and directed.

M&L for Precast PCC kerb stone, rounded or chamfered on edges, factory fabricated, made out of PCC (1:2:4), type Bo (using 12.5mm graded stone aggregates) of size 150mm long, 100mm thick and 350mm deep, set and jointed in CM (1:4) complete all as specified and directed.

Mohit Enterprises

SANJEEV ENTERPRISES

DIKSHA CONSTRUCTION CO

RIYASAT ALI KHAN

Vasundhra Enterprises

REHAN CONSTRUCTION