LAC ADS CONSTRUCTION OF ANGANVADI AT MANIKKAPPARA IN PONMUNDAM GRAMAPANCHAYATHCONSTRUCTION OF NEW ANGANVADI BUILDING AT MANIKKAPPARA IN PONMUNDAM GRAMAPANCHAYATH General Civil Work

Work Name:LAC-ADS- CONSTRUCTION OF ANGANVADI AT MANIKKAPPARA IN PONMUNDAM GRAMAPANCHAYATH-CONSTRUCTION OF NEW ANGANVADI BUILDING AT MANIKKAPPARA IN PONMUNDAM GRAMAPANCHAYATH-General Civil Work

ttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges’5.9.16.1:Centering and shuttering including strutting, etc. and removal of form for: Edges of slabs and breaks in floors and wallsUnder 20 cm widemetre
50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
50.6.1.4:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete1
50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack woodc
50.9.2.1:Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin - charge using Anjili/ Jack wood
9.53:Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)eachû9.48.2:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etcj21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)M
21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fitt

牥癥牥爠煥極敲⁤湩汣摵湩⁧桴⁥潣瑳漠⁦偅䵄爠扵敢⽲渠潥牰湥⁥慧歳瑥爠煥極敲⁤䘨瑩楴杮⁳桳污敢瀠楡⁤潦⁲敳慰慲整祬倩睯敤⁲潣瑡摥愠畬業楮浵⠠業楮畭桴捩湫獥⁳景瀠睯敤⁲潣瑡湩⁧〵洠捩潲⥮ů㈀⸱⸳㨱牐癯摩湩⁧湡⁤楦楸杮朠慬楺杮椠污浵湩畩潤牯‬楷摮睯‬敶瑮汩瑡牯猠畨瑴牥⁳湡⁤慰瑲瑩潩獮攠捴‮楷桴䔠䑐⁍畲扢牥⼠渠潥牰湥⁥慧歳瑥攠捴‮潣灭敬整愠⁳数⁲桴⁥牡档瑩捥畴慲牤睡湩獧愠摮琠敨搠物捥楴湯⁳景䔠杮湩敥⁲‭湩ⴠ桃牡敧‮ 潃瑳漠⁦污浵湩畩湳灡戠慥楤杮猠慨汬戠⁥慰摩椠慢楳⁣瑩浥㨩楗桴映潬瑡朠慬獳瀠湡獥漠⁦⸴‰浭琠楨正敮獳⠠敷杩瑨渠瑯氠獥⁳桴湡ㄠ欰⽧煳⥭@㄀⸳⸱㨱㈱洠散敭瑮瀠慬瑳牥漠⁦業㩸㨱‴ ‱散敭瑮㨠㐠映湩⁥慳摮舩〵ㄮ⸳㨱‹浭挠浥湥⁴汰獡整楲杮漠⁦業⁸›㨱″ㄨ挠浥湥⁴›″楦敮猠湡⁤ 湩汣摵湩⁧污潣瑳漠⁦慭整楲污ⱳ氠扡畯⁲档牡敧⁳瑥⁣潣灭敬整@㄀⸳㘱ㄮ㘺洠散敭瑮瀠慬瑳牥漠⁦業㩸㨱″ ‱散敭瑮㨠㌠映湩⁥慳摮訩㌱㐮⸳㨱灁汰楹杮漠敮挠慯⁴景眠瑡牥琠楨湮扡敬挠浥湥⁴牰浩牥漠⁦灡牰癯摥戠慲摮愠摮洠湡晵捡畴敲漠慷汬猠牵慦散场瑡牥琠楨湮扡敬挠浥湥⁴牰浩牥‡㄀⸳〶ㄮ场污慰湩楴杮眠瑩⁨捡祲楬⁣浥汵楳湯瀠楡瑮漠⁦灡牰癯摥戠慲摮愠摮洠湡晵捡畴敲琠楧敶愠癥湥猠慨敤吺潷漠⁲潭敲挠慯獴漠敮⁷潷歲Î㄀⸳㘴ㄮ䘺湩獩楨杮眠污獬眠瑩⁨捁祲楬⁣浓潯桴攠瑸牥潩⁲慰湩⁴景爠煥極敲⁤桳摡㩥敎⁷潷歲⠠睔牯洠牯⁥潣瑡愠灰楬摥䀠ㄠ㘮‷瑬⽲〱猠浱漠敶⁲湡⁤湩汣摵湩⁧牰浩湩⁧潣瑡漠⁦硥整楲牯瀠楲敭⁲灡汰敩⁤⁀⸲〲欠⽧〱猠浱㌱㘮⸲㨱慐湩楴杮眠瑩⁨祳瑮敨楴⁣湥浡汥瀠楡瑮漠⁦灡牰癯摥戠慲摮愠摮洠湡晵捡畴敲漠⁦敲畱物摥挠汯畯⁲潴朠癩⁥愠癥湥猠慨敤吺潷漠⁲潭敲挠慯獴漠敮⁷潷歲漠敶⁲湡甠摮牥挠慯⁴景猠極慴汢⁥桳摡⁥楷桴漠摲湩牡⁹慰湩⁴景愠灰潲敶⁤牢湡⁤湡⁤慭畮慦瑣牵⁥霮
ㄱ㐮⸱㨲牐癯摩湩⁧湡⁤慬楹杮瘠瑩楲楦摥映潬牯琠汩獥椠楤晦牥湥⁴楳敺⁳琨楨正敮獳琠敢猠数楣楦摥戠⁹桴⁥慭畮慦瑣牵牥 楷桴眠瑡牥愠獢牯瑰潩敬獳琠慨⸰㠰‥湡⁤潣普牯業杮琠卉㨠ㄠ㘵㈲‬景愠灰潲敶⁤慭敫‬湩愠汬挠汯畯獲愠摮猠慨敤ⱳ氠楡⁤湯㈠‰浭琠楨正挠浥湥⁴潭瑲牡ㄠ㐺ㄨ挠浥湥⁴›‴潣牡敳猠湡⥤‬湩汣摵湩⁧牧畯楴杮琠敨樠楯瑮⁳楷桴眠楨整挠浥湥⁴湡⁤慭捴楨杮瀠杩敭瑮⁳瑥⹣‬潣灭敬整匮穩⁥景吠汩⁥〶‰⁸〶‰浭Ꜯ
ㄱ㐮⸶㨲牐癯摩湩⁧湡⁤慬楹杮嘠瑩楲楦摥琠汩獥椠摮晩敦敲瑮猠穩獥⠠桴捩湫獥⁳潴戠⁥灳捥晩敩⁤祢洠湡晵捡畴敲⥲‬楷桴眠瑡牥愠獢牯瑰潩敬獳琠慨⸰㠰┠愠摮挠湯潦浲湩⁧潴䤠匮‮㔱㈶ⰲ漠⁦愠灰潲敶⁤慭敫‬湩愠汬挠汯畯獲☠猠慨敤‬湩猠楫瑲湩Ⱨ爠獩牥漠⁦瑳灥ⱳ漠敶⁲㈱洠桴捩敢⁤景挠浥湥⁴潭瑲牡ㄠ㌺⠠‱散敭瑮㨠㌠挠慯獲⁥慳摮Ⱙ椠据畬楤杮朠潲瑵湩⁧桴⁥潪湩⁴楷桴眠楨整挠浥湥⁴…慭捴楨杮瀠杩敭瑮⁳瑥⹣挠浯汰瑥⹥楓敺漠⁦楔敬㘠〰㙸〰洠魭
ㄱ㐮㨰牐癯摩湩⁧湡⁤慬楹杮爠捥楴楦摥䜠慬敺⁤敃慲業⁣汦潯⁲楴敬⁳景猠穩⁥〳砰〳‰浭漠⁲潭敲⠠桴捩湫獥⁳潴戠⁥灳捥晩敩⁤祢琠敨洠湡晵捡畴敲⥲漠⁦獉⁴畱污瑩⁹潣普牯業杮琠卉›㔱㈶′景愠灰潲敶⁤慭敫椠污潣潬牵ⱳ猠慨敤ⱳ攠捸灥⁴桷瑩ⱥ䤠潶祲‬片祥䘠浵⁥敒⁤牂睯Ɱ氠楡⁤湯㈠‰浭琠楨正挠浥湥⁴潭瑲牡ㄠ㐺⠠‱敃敭瑮㨠㐠䌠慯獲⁥慳摮 湩汣摵湩⁧潰湩楴杮琠敨樠楯瑮⁳楷桴眠楨整挠浥湥⁴湡⁤慭捴楨杮瀠杩敭瑮⁳瑥⹣‬潣灭敬整אַ
⸸ㄳ债潲楶楤杮愠摮映硩湩⁧獉⁴畱污瑩⁹散慲業⁣汧穡摥眠污楴敬⁳潣普牯業杮琠卉›㔱㈶′琨楨正敮獳琠敢猠数楣楦摥戠⁹桴⁥慭畮慦瑣牵牥Ⱙ漠⁦灡牰癯摥洠歡ⱥ椠污潣潬牵ⱳ猠慨敤⁳硥散瑰戠牵畧摮ⱹ戠瑯汴⁥牧敥Ɱ戠慬正漠⁦湡⁹楳敺愠⁳灡牰癯摥戠⁹湅楧敮牥椭⵮䌠慨杲ⱥ椠歳物楴杮‬楲敳獲漠⁦瑳灥⁳湡⁤慤潤ⱳ漠敶⁲㈱洠桴捩敢⁤景挠浥湥⁴潭瑲牡ㄠ㌺⠠‱散敭瑮㨠㌠挠慯獲⁥慳摮 湡⁤潪湩楴杮眠瑩⁨牧祥挠浥湥⁴汳牵祲䀠㌠㌮杫瀠牥猠浱‬湩汣摵湩⁧潰湩楴杮椠桷瑩⁥散敭瑮洠硩摥眠瑩⁨楰浧湥⁴景洠瑡档湩⁧桳摡⁥潣灭敬整딮㈲㔮债潲楶楤杮愠摮氠祡湩⁧慷整⁲牰潯楦杮琠敲瑡敭瑮椠畳歮湥瀠牯楴湯漠⁦䍗ⱳ戠瑡牨潯瑥⹣‬祢愠灰祬湩⁧散敭瑮猠畬牲⁹業數⁤楷桴眠瑡牥瀠潲景湩⁧散敭瑮挠浯潰湵⁤潣獮獩楴杮漠⁦灡汰楹杮㨠愠 楆獲⁴慬敹⁲景猠畬牲⁹景挠浥湥⁴⁀⸰㠴‸杫猯浱洠硩摥眠瑩⁨慷整⁲牰潯楦杮挠浥湥⁴潣灭畯摮䀠〠㈮㌵欠⽧煳⹭吠楨⁳慬敹⁲楷汬戠⁥污潬敷⁤潴愠物挠牵⁥潦⁲‴潨牵⹳戠 敓潣摮氠祡牥漠⁦汳牵祲漠⁦散敭瑮䀠〠㈮㈴欠⁧猯浱洠硩摥眠瑩⁨慷整⁲牰潯楦杮挠浥湥⁴潣灭畯摮䀠〠ㄮ㘲欠⽧猠浱‮桔獩氠祡牥眠汩敢愠汬睯摥琠楡⁲畣敲映牯㐠栠畯獲映汯潬敷⁤楷桴眠瑡牥挠牵湩⁧潦⁲㠴栠畯獲‮桔⁥慲整椠据畬敤⁳牰灥牡瑡潩景猠牵慦散‬牴慥浴湥⁴湡⁤敳污湩⁧景愠汬樠楯瑮ⱳ挠牯敮獲‬番据楴湯⁳景瀠灩獥愠摮洠獡湯祲眠瑩⁨潰祬敭⁲業數⁤汳牵祲
㘱㠮㨹牐癯摩湩⁧湡⁤慬楹杮洠瑡⁴楦楮桳摥瘠瑩楲楦摥琠汩⁥景猠穩⁥〳砰〳砰⸹洸慨楶杮眠瑩⁨慷整⁲扡潳灲楴湯氠獥⁳桴湡〠㔮‥湡⁤潣普牯業杮琠卉›㔱㈶′景愠灰潲敶⁤慭敫椠污潣潬牵⁳湡⁤桳摡獥椠潦⁲畯摴潯⁲汦潯獲猠捵⁨獡映潯灴瑡ⱨ挠畯瑲礠牡Ɽ洠汵楴洠摯汥⁳潬慣楴湯攠捴Ⱞ氠楡⁤湯㈠洰桴捩慢敳漠⁦散敭瑮洠牯慴⁲㨱‴ㄨ挠浥湥⁴›‴潣牡敳猠湡⥤椠污桳灡獥☠瀠瑡整湲⁳湩汣摵湩⁧牧畯楴杮琠敨樠楯瑮⁳楷桴眠楨整挠浥湥⁴業數⁤楷桴洠瑡档湩⁧楰浧湥獴攠捴‮潣灭敬整愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩䌭慨杲⹥ȓ㄀⸶〹债潲楶楤杮愠摮氠祡湩⁧慴瑣汩⁥楴敬⠠潦⁲楶楳湯椠灭楡敲⁤数獲湯⁳獡瀠牥猠慴摮牡獤 景猠穩⁥〳砰〳砰⸹洸慨楶杮眠瑩⁨慷整⁲扡潳灲楴湯氠獥⁳桴湡〠㔮‥湡⁤潣普牯業杮琠卉›㔱㈶′景愠灰潲敶⁤慭敫椠污潣潬牵⁳湡⁤桳摡獥椠潦⁲畯摴潯⁲汦潯獲猠捵⁨獡映潯灴瑡ⱨ挠畯瑲礠牡Ɽ洠汵楴洠摯污⁳潬慣楴湯攠捴Ⱞ氠楡⁤湯㈠洰桴捩慢敳漠⁦散敭瑮洠牯慴⁲㨱‴ㄨ挠浥湥⁴›‴潣牡敳猠湡⥤椠污桳灡獥☠瀠瑡整湲⁳湩汣摵湩⁧牧畯楴杮琠敨樠楯瑮⁳楷桴眠楨整挠浥湥⁴業數⁤楷桴洠瑡档湩⁧楰浧湥獴攠捴‮潣灭敬整愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩䌭慨杲⹥ʗ㄀⸰㠲债潲楶楤杮愠摮映硩湩⁧瑳楡汮獥⁳瑳敥䜨慲敤㌠㐰 慲汩湩⁧慭敤漠⁦潈汬睯琠扵獥‬档湡敮獬‬汰瑡獥攠捴Ⱞ椠据畬楤杮眠汥楤杮‬牧湩楤杮‬畢晦湩Ⱨ瀠汯獩

hing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)®9.63.2:Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : (Copper oxidized as per IS : 1378)200x10 mmno£9.66.1:Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : (Copper oxidized as per IS : 1378).125 mm`9.117.2:Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer-in-chargeExtruded section profile size 42x50 mm{9.118.2:Providing and fixing to existing door frames30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge.8.2.2.2:Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. completel
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar worksG13.71:Lettering with black Japan pint of approved brand and manufactureper Letter per cm height¤OD202513/2025-2026:Supplying and fixing White board of size 2.4X 1.2 m including the cost of conveyance and all labour charges etc. complete rate as per market rate'APPENDIX B PLUMBING AND SANITARY WORKS 17.3.1:Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lidÉ50.17.1.5:Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.H
17.7.4:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap ‰17.28.1.1:Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC. waste fittings complete. Semi rigid pipe32 mm dia
17.70.1:Providing and fixing PTMT Bottle Trap for Wash basin and sink.Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the center of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gmsó17.71:Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gmsH17.29:Providing and fixing 100 mm sand cast Iron grating for gully trap.æ17.72:Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms-
17.73.1:Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm. weighing not less than 170 gmsR
OD183728/2025-2026:Supplying and installing ready made PVC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (Provision for CC/RCC/Sand/06mm aggregate for the preparation of bed shall be paid separately) 3. 25 to below 35 flush capacity
18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Litre6
50.18.7.2.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall4
50.18.7.4.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wallP
50.18.8.7.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work including cutting chases and making good the wall etc. 63 mm pipe 6 Kgf/cm2]
50.18.8.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step

PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm26
50.18.9.14.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10 Kgf/cm2 - External work- Exposed on wall6
50.18.9.15.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 6 Kgf/cm2 - External work - Exposed on wall6
50.18.9.16.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10Kgf/cm2 - External work - Exposed on wallÖ50.18.9.7.2:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.63 mm dia 4 Kgf/cm2&
50.18.9.17.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall•50.18.9.20.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow›50.18.9.20.2:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -63 dia 45 degree Elbowš50.18.9.20.3:Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Door Elbow”50.18.9.20.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Bend50.18.9.20.6:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -63x63x63 mm dia Door Tee™50.18.9.20.7:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia vent cowlž50.18.9.20.9:Providing and fixing PVC moulded fitting / accessories for Rigid PVC pipes, including jointing with PVC solvent cement-63 mm dia Socket /couplingÖ50.18.9.9.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2'
50.18.9.18.2:Providing and fixing PVC pipes including fixing the pipe with clamps/Clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 4 Kfg/cm2 - External work - Exposed on wall–50.18.9.22.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow¡50.18.9.22.2:Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow™50.18.9.22.3:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110 mm dia Door Elbow”50.18.9.22.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend 50.18.9.22.11:Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 110 mm dia Socket/ couplingÃ18.58.2.1:Providing and fixing PTMT grating of approved quality and colour. Rectangular type with openable circular lid150 mm nominal size square 100 mm diameter of the inner hinged round gratingˆ18.54.2:Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 122 mm long, weighing not less than 99 gms