REPAIR MAINT OF STORAGE WATER HEATER SOLAR WATER HEATER AND ALLIED INTERNAL WIRING WORK AT ROORKEE CANTT AND PURKAZI UNDER GE ROORKEE

Amount

M&L for taking down carefully geysers of any make and capacity, transporting to MES E/M yard for dismantling the same for inspection, taking out all unserviceable and burnt spare parts, de-scaling and cleaning of tank thoroughly with washing compound or liquid solution, applying one coat of milky white synthetic enamel paint with sprayer after preparation of surface, writing work as per existing pattern with black synthetic enamel paint and re-fixing of geysers in its original position complete all as specified and directed. Note : (a) Spare parts shall be measured and paid for separately under respective item of BOQ, however minor items which are not catered in this schedule, the cost of the same shall be deemed to be included in the unit rate. (b) Minimum two technician (One Electrician and One Plumber) and two helper with all types of tools and plants/veh etc. should report to E&M yard at 08.30 hrs on all working days & Sundays/holidays for repair of geyser including taking down/ /fixing of the same. (c) Repair works will be carried out at workshop E&M yard. (d) Repair works of geyser should be completed and re-fixed the same with in 12 hrs after receipt of complaint slip. If the contactor found fail to rectify the complaint within 24 Hrs, an amount of Rs. 100 for each complaint will be deducted from the contractor's dues.

S&F heating element 1.50 KW, 220 / 230 Volts any type / shape (Cup type round) ISI marked complete all as specified and directed. Make - Theta /Daspass.

S&F heating element 1.50 KW, 220 / 230 Volts any type / shape (Cup type triangular) ISI marked complete all as specified and directed. Make - Theta /Daspass.

S&F geyser Vertical type of capacity 25 ltrs, Single phase, 240 Volts, Colour Grey with auto cut-off and adjustable temperature complete all as pecified and directed. Make : Jaguar/Hovels( Quarto)/Bajaj/UHSA

S&F geyser Horizontal type of capacity 25 litres, Single phase, 240 Volts, Colour Grey with auto cut-off and adjustable temperature complete all as specified and directed. Make : Jaguar/Hovels( Quarto)/Bajaj/UHSA

S&F geyser Vertical type of capacity 50 ltrs, Single phase, 240 Volts, Colour Grey with auto cut-off and adjustable temperature complete all as specified and directed. Make : Jaguar/Hovels( Quarto)/Bajaj/UHSA

S&F Instant water heater 01 Ltrs capacity complete including thermostate and indicators and auto cut-out operated on single phase 240 volts AC supply fixed on wall complete all as specified and directed. Make : Jaguar/Hovels( Quarto)/Bajaj/UHSA

S&F heating element 2.0 KW, 220 / 230 Volts any type / shape (Cup type round) ISI marked complete all as specified and directed. Make - Theta /Despises.

S&F heating element 2.0 KW, 220 / 230 Volts any type / shape (Cup type triangular) ISI marked complete all as specified and directed make - Theta /Despises.

S&F Thermostat switch ISI marked make – Alcona or equivalent complete all as specified and directed.

S&F Brass Head Assembly having 8 to 9 holes suitable for 25 litres capacity geyser of make – Bajaj, Venus, Recold complete all as specified and directed.

S&F Brass Head Assembly having 8 to 9 holes suitable for 35 litres capacity geyser of make – Bajaj, Venus, Recold complete all as specified and directed.

S&F Brass Head Assembly having 8 to 9 holes suitable for 50 litres capacity geyser of make – Bajaj, Venus, Recold complete all as specified and directed.

S&F Brass Safety plug ISI marked suitable for 25 / 35 / 50 litres capacity geysers complete all as specified and directed.

S&F round shaped rubber gasket having 8 to 9 holes, suitable for 25 / 35 / 50 liters capacity geyser complete all as specified and directed.

S&F Brass chromium plated connection 15mm, 450mm long with chromium plated adopter and washer at both ends complete all as specified and directed by Engr-in -charge.

S&F Brass chromium plated connection 15mm, 600mm long with chromium plated adopter and washer at both ends complete all as specified and directed by Engr-in -charge.

S&F Element holding clamps suitable for 25 / 35 / 50 Liters capacity geysers complete all as specified and directed.

S&F in repairs 450 mm long heavy duty PVC connection suitable for cold water supply with two Nos. Brass nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.

S&F in repairs 600 mm long heavy duty PVC connection suitable for cold water supply with two Nos. Brass nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.

S&F Neon lamp (Red & Green) round / square in shape suitable for 25 / 35 / 50 liters capacity geysers making electrical connection at its original position including taking down old lights complete all as specified and directed.

S&F Neon lamp set of two lamps (Red & Green) fixed in PVC box of size 100mm X 100mm X 40mm fixed on wall duly electrically connected in parallel with neon lamp of storage geyser installed out side of bathroom with PVC insulated copper conductor cable 0.5 Sqmm of suitable length (approx 4 Mtrs) fixed in side of the bathroom complete all as specified and directed at site. Note:- 02 Nos Neon lamp, PVC box and 02 circuits of PVC insulated wire (for red & green Neon lamps) shall be measured as one Job.

S&F in replacement ISI marked pressure release valve brass body suitable for 15 mm bore pipe line for cold water connection in storage geyser complete all as specified and directed.

M&L for repairing of inner copper tank / container of geyser by brazing not exceeding 4 cm in length complete all as specified and directed.

S&F of ISI marked inner shell made of stainless steel suitable for 25 Litters capacity geyser complete all as specified and directed.

S&F of ISI marked inner shell made of stainless steel suitable for 35 Liters capacity geyser complete all as specified and directed.

S&F of ISI marked inner shell made of stainless steel suitable for 50 Liters capacity geyser complete all as specified and directed.

M&L for fixing of Storage Geysers of any capacity on wall at specified height, drilling hole of Nos and grouting anchor fastener 04 Nos of suitable dia complete with washers and nuts/bolts complete all as specified and directed.

S&F PVC insulated round copper wire 3 core 2.5 Sqmm for making connection from storage geyser to industrial / power socket complete including removal of existing old damaged wire all as specified and directed.

S&F plug top 3 pin 15 Amps for storage geyser including removal of existing plug top complete all as specified and directed

S&F Industrial type plug top 3 pin, 20 Amps suitable for industrial socket for storage geyser including taking down old / rusted plug complete all as specified and directed. Make- C&S Cat Part No. CSDBPSPN020 of equivalent in model in hovels / Legrand.

S&F Industrial type socket, 20 Amps suitable for industrial Plug Top for storage geyser including taking down old / rusted socket complete all as specified and directed. Make C&S Cat Part No. CSDBSSPN020 of equivalent in model in havells / Legrand.

Taking down carefully solar water heating system of capacity 200 to 600 liters per day of any make, dismantling the same for inspection, taking out all unserviceable and burnt spare parts, de-scaling and cleaning of stainless steel tank thoroughly with washing compound or liquid solution, applying one coat of synthetic enamel paint with sprayer after preparation of surface, writing work as per existing pattern with black synthetic enamel paint, including replacement of unserviceable element, tore glass tube and heat resistant insulating material as per existing sizes, type and capacity and re-fixing of solar water heating system at its original position complete all as specified and directed.

S&F in repair plug & socket enclosure industrial type in sheet metal enclosure with 20A SP MCB complete all as specified and directed. Make: C&S/Legrand/Havells

M&L for lagging to pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/Cum conforming to IS 9842 complete all as specified and directed. Note:- GI pipe shall be measured and paid for separately under respective item of BOQ.

SS&F 15mm bore GI pipe medium grade for making connection from storage geyser to bib tap including saddles and screws complete all as specified and directed.

S&F 25mm bore GI pipe medium grade for making connection for solar water heater (Hot & Cold water connection), laid in floors of fixed to wall/roof including saddles and screws complete all as specified and directed.

S&F 15mm bore bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for hot water supply point complete all as specified and directed.

S&F 15mm bore angle valve chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F pressure release valve suitable for 25 mm dia pipe for solar hot water supply made out of gun metal complete all as specified and directed.

S&F in replacement Solar Water heating element 2 KW single phase 230 volts suitable for hot water storage tank including disconnection existing element and making new electric connection complete all as specified and directed.

S&F in replacement XLPE insulated cable aluminium conductor heavy duty of size 4 core 25 Sqmm including fixing it in same location with the help of GI saddles and screws complete all as specified and directed.

S&F in replacement rotational moulded cylindrical PVC service tank of capacity 2000 Ltrs for dedicated supply of cold water to Solar water heaters including disconnecting all incoming and outgoing water connections and making new connections and float valve of suitable size complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixtures and fittings such as swithes, ceiling rose, pendant, regulator, sockets, light fitting etc and making good disturbed surfaces of walls, floors, ceiling etc complete all as specified and directed.

M&L for concealed Point wiring with 1.5 Sqmm (nominal area) PVC insulated, unsheathed FRLS multi stranded copper conductor single core cable 1100 Volt grade drawn through and including PVC conduit of 20 mm dia ISI marked with complete accessories, including modular type galavanised iron steel sunken boxes suitable for modular type switches, sockets, also including PVC insulated and unsheathed single core multi stranded copper conductor cable of size 1.5 sqmm green in colour as earth continuity conductor connected to common earth dolly and making good disturbed surfaces to match the existing colour complete all as specified and directed for the following :- Note:- (i) The quoted rate is deemed to be included the price of GI sunken box suitable for modular type switches, sockets etc of any module, size & shape. (ii) The quoted rate is also deemed to be included the rate of cover plate, blank plate of any type and any module. (iii) The quoted rate deemed to be included cost of materials & labour for cutting chases for concealed point wiring and making good in cement mortar (1:4) including surface finishes such as white / colour wash, distempering, cement base painting etc as required to match the existing surfaces.

One light point controlled by one one way switch

One fan and exhaust fan point controlled by one one way switch

One bell/buzzer point controlled by one push button

One 3/5 pin socket outlet 5 Amp on the same board with other swithes.

One 3/5 pin 5 Amps socket outlet on indepandant board.

One 3/5 pin 5 Amps socket outlet indepandant but below the switch board in the vertical plane.

All as per serial item No. 45.00 above but with 2.5 Sqmm (nominal area) FRLS cable PVC for 15 Amp 3/5 pin socket power point including 1.5 Sqmm copper conductor green colour for earth continuity complete all as specified and directed.

S&F switch piano flush type polycarbonate single pole one way 5 Amps complete all as specified and directed.

S&F switch piano flush type polycarbonate single pole one way 15 Amps complete all as specified and directed.

S&F socket outlet polycarbonate 2 in 1, 3 pin 5 Amps flush type complete all as specified and directed.

S&F socket outlet polycarbonate 2 in 1, 3 pin 5/15 Amps flush type complete all as specified and directed.

S&F bell push flush type 5 Amps complete all as specified and directed.

S&F Bell electric ding-dong type suitable for AC single phase 230 volts complete all as specified and directed.

S&F electronic fan regulator 230 volts , step type (5 step) socket type ,hum free 100/300 watt complete all as specified and directed.

M&L for Ceiling rose in poly carbonate 3 terminal brass flush type 6 Amps, 250 volts AC ISI marked, fixing on 3 mm thick sunmica hylum plastic laminated round sheet 75mm dia complete all as specified and directed. Make: Havells (ROHS) Cat part No AHLHXCW000 or equivalent in Anchor (Panta)/ SSK/Cona

S&F Angle holders (metal ring) PVC / polycarbonate type with back plate, fixing on 3 mm thick sunmica hylum plastic laminated round sheet 75mm dia complete with LED bulb 12 watts all as specified and directed. Make: Havells(ROHS) Cat part No AHLHXAW000 or equivalent in Anchor (Panta)/ SSK/Cona

S&F in replacement of old unserviceable light fittings LED tube light fitting 1x20 Watt industrial batten patti type with bipin holders connector block complete with all accessories internally prewired including connecting up three core single wire and 01 No. 20 watt retrofit LED tube rod T8 polycabonate to be fixed at any height of wall / ceiling complete all as specified and directed . Make : C&S Cat part No. LTIC00120WLED/WD or equivalent in Havells/Philips//Wipro

S&F in replacement of old unserviceable light fittings LED tube light fitting 2x20 Watt (4 feet) industrial batten box type with bipin holders connector block complete with all accessories internally prewired including making fixing arrangement, suspended to ceiling with metal chain-02 Nos, 2 feet long, connecting up three core single wire and 2x20 watt retrofit LED tube rod T8 polycabonate to be fixed at any height of wall/ceiling complete all as specified and directed. Make : C&S Cat part No. LTIC00220WLED/WD or equivalent in Havells/Philips//Wipro

S&F in replacement of old unserviceable LED tube light fitting 1x10 Watt industrial batten patti type with bipin holders connector block complete with all accessories internally prewired including connecting up three core single wire and 10 watt integral LED tube rod T5 complete all as specified and directed. Make : C&S Cat part No. LTTB2F10WLED/W or equivalent in Havells/Philips/Wipro

S&F in replacement of old unserviceable building security light fitting versatile pressure die-cast aluminium with high power LED 25 W as light source complete with LED 25 W 5000K including brackets made out of 40mm dia GI pipe light grade, bent to shape including 02 Nos MS flat iron clamp, nut & bolts etc complete all as specified and directed. Make : C&S Cat part No. LTESS25WLED/LS or equivalent model in Havells/Wipro/Philips

S&F in replacement of old unserviceable bulk head light fittings with new LED bulk head IP 65 with prismatic diffuser 1x10 Watt including LED bulb 10/12 watts white complete with all accessories internally prewired including connecting up three core single wire complete all as specified and directed. Make: C&S Cat part No. CG80IB10WLED or equivalent model in Havells/Philips/Wipro

S&F in replacement of old unserviceable recesss mounting light fitting 2' x 2' of capacity 36 Watts powder coated white CRCA full glow suitable for 600 x600 mm POP false ceiling including making electrical connection from ceiling rose to light fitting complete all as specified and directed. Make - C&S Cat part No. LTCRP36WLED2X2 or any equivalent model in Havells/Philips/Wipro.

S&F in replacement of old unserviceable LED Highbay light fitting 100 watt capacity with PDC aluminium with reflactor including making electrical connection from ceiling rose to light fitting complete all as specified and directed. Make - C&S Cat .LTEHB100WHPLED/LS or any equivalent model in Havells/Philips/Wipro.

S&F in replacement of old unserviceable LED Flood light fitting 100 watt capacity with SMD LED pressure die-cast aluminium housing with reflactor including making electrical connection from ceiling rose to light fitting complete all as specified and directed. Make - C&S Cat .LTEFR100WHPLED FLOOD LIGHT or any equivalent model in Havells/Philips/Wipro. Note for Item No 62 & 63:- The Quoted rate is deemed to be included for installation of light fitting at any height including necessary T & P and safety equipments.

Taking down old sub main wiring and S&F new Sub main wiring with two runs of single core FRLS PVC insulated and unsheathed multistranded, copper conductor cable of size 4.0 Sqmm LT, 1100V grade, drawn trhough and including PVC non metallic conduit of 20mm/approprite dia with accessories & fittings and one run of 4.0 Sqmm single core multi stranded copper conductor cable as earth continuity conductor. Two runs of cable one run of earth wire and one run of PVC non metallic conduit shall be measured as one run length. Cable required for connection to DBs and MCBs shall be deemed included in quoted unit rate and shall not be measured separately. Earth wire shall run inside the conduit pipe complete all as specified and directed.

All as per serial item No. 64.00 but 6.00 Sqmm copper conductor and 6.0 Sqmm as earth continuity conductor complete all as specified.

All as per serial item No. 64.00 but 10.00 Sqmm copper conductor and 10.0 Sqmm as earth continuity conductor complete all as specified.

S&F in replacement of old unserviceable Distribution Board (DB) made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 8 way IP 43 (double door) with 200 Amps rated copper bus bar neutral bar, earth bar, single pole and neutral 250 volts, flush to wall complete all as specified and directed.

S&F in replacement of old unserviceable Distribution Board (DB) made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 4 way IP 43 (double door) with 200 Amps rated copper bus bar neutral bar, earth bar, single pole and neutral 250 volts, flush to wall complete all as specified and directed.

S&F in replacement of old unserviceable Distribution Board (DB) made out of sheet metal enclosure (CRCA sheet) dust and vermin proof TPN 4 way IP 43 (double door) with 200 Amps rated copper bus bar neutral bar, earth bar, single pole and neutral 250 volts, flush to wall complete all as specified and directed. Make - Legrand/C&S/ABB/Havells

S&F in replacement of unserviceable TPN DB - VTPN for independent mounting fixed on wall duly flush mounted, 4 way, IP 43, IK 09 with 250 Amp Bus bar complete all as specified and directed. Make: C & S Cat part No . CSDBMCCB125PDD04S or any equivalent model in ABB/ Havells / Legrand / Havells

S&F in replacement of unserviceable MCCB 100 Amps four pole, 415 Volt, 25 KA adjustable thermal and magnetic setting including necessary connection complete all as specified and directed by Engr-in-Charge. Make: : Legrand Cat part No.420013 or equivalent model in ABB/C&S/Havells

S&F in replacement of old unserviceable MCBs single pole, 6 to 32 Amps 240 Volt 'C' curve 10 KA complete all as specified and directed.

S&F in replacement of old unserviceable MCBs single pole and neutral, 6 to 32 Amps 240 Volt 'C' curve 10 KA complete all as specified and directed.

S&F In replacement of old unserviceable MCBs ISI marked 415 Volt, 50 Hz, four pole 63 Amps, breking capacity 10 KA all as specified and directed.

S&F weather proof flat twin core cable aluminium conductor of size 4 Sqmm suitable for house service connection complete all as directed.

All as per serial item No. 75.00 above but of size 6 Sqmm twin core.

All as per serial item No. 75.00 above but of size 10 Sqmm twin core.

All as per serial item No. 75.00 above but of size 16 Sqmm twin core.

M&L earthing complete with galvanized steel plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to GI wire 4mm dia size by means of GI bolts, nuts, check nuts and washers, earth strip protected by GI pipe 20 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6) type C-1 chamber of size not less than 300x300x300mm (internal diamentions), RCC (1:2:4) type B-1 chamber cover, reinforced with 8 mm dia steel bars @ 15 cm C/C both ways and MS frame etc complete all as specified and directed. Note:- The unit rate includes earth strip and protection pipe upto (maximum) 7.5 metre from earth plate, earth point/test point and chamber shall be made 0.5 mtr away from the earthing pit.

S&F in replacement Retrofit LED T8 tube Polycarbonate 4 fit 20 W Rod, 240 Volt including connection etc complete all as specified and directed. Make - C&S Cat part No. LT4F20WLEDT8/WD or equivalent in Bajaj/Havells

S&F LED bulb 12 watts with B-22 base operated on single phase AC supply complete all as specified and directed. Make - Syska/Havells/Bajaj/C&S

S&F LED bulb 9 watts with B-22 base operated on single phase AC supply complete all as specified and directed. Make - Syska/Havells/Bajaj/C&S

S&F in replacement of terminal boxes of size 8" x 10"x 2" flush to wall, made of GI sheet not less than 1.6 mm thick with 3 mm thick bakelite / hylum sheet top cover of white colour ISI marked including machine screws & washers with electric connection to existing switch / socket / fan regulators complete and making good disturbed /surrounding surfaces in cement mortar (1:4) with white/colour wash or distemering to match the existing surfaces complete all as specified and directed.

All as per serial item No. 83.00 above but of size 6" x 4"x 2"

All as per serial item No. 83.00 above but of size 4" x 4"x 2"

S&F in replacement FTL rod 36/ 40 watt in existing fluorescent fitting 4 feet long complete all as directed at site. Make - Crompton/Bajaj/Philips

S&F in replacement electronic ballast suitable for FTL luminaries 1x 36/ 40 watt including making electrical connection complete all as specified and directed. Make - Crompton/Bajaj/Havells

AK Construction Co

shiv electricals

Manish Enterprises

KISHORE CHAND DINESH CHAND

A ONE BUILDERS AND ENGINEERS

GLIBS CONSTRUCTION