SPL REPAIR OF COMPOUND WALL NEAR BLDG NO T 26 AND SPL REPAIRS TO 02 STORAGE SHEDS TG14 AND TG16 AT COD UNDER AGE B R EAST AT GE DEHU ROAD

Amount

M&L for Dismantling fencing wire mesh , any type

M&L for Dismantling post, struts , (wood , steel or Rcc) any section incl. taking out embedded portion in concrete or brickwork and making disturbed portion good

M&L for Excavation in post holes or similar holes each nexc. 0.5 cum getting out returning filling in and ramming earth around in layers n. exc 25 cm,watering , and removing surplus soils to a distance nexc 50m and making good surface in hard soils, complete all as specified.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate ) as in foundation concrete for fencing post.

S&F angle iron fencing post and struts including cutting tops to shape as directed, drilling holes, notching for wire etc , flat iron fillets ( for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-410-0 or Fe 310-0 any size.

S&F MS Screw bolts ( machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut length exc. 5 cm but not exc 10 cm long 11 to 15mm dia of shank.

S&F flat iron straps to chain link fencing including drilling bolting or riveting etc as directed

Supply only chain link MS galvanised fencing incl line wire 100x100mm mesh (12 gauge) size and any type of strands, rails, straining bolts etc incle provn of binding wire all complete

Supply only chain link MS galvanised fencing incl line wire 50x50mm mesh (12 gauge) size and any type of strands, rails, straining bolts etc incle provn of binding wire all complete

Fixing only chain link fencing any mesh, size and type to any type of standards, rails, straining bolts etc incl provn of binding wire

M&L for round bars 10mm dia and over cut to length bent to shape required incl cranking, bending spirally for hoping for columns, hooking ends and binding with and incl MS Wire (annealed) not less than 0.9mm dia or securing with clips.

S&F GI two strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs @ 75mm spacing and straining and fixing to any type of standard rail, straining bolts, inlc securing or tying at crossing with and provn of galvanised mild steel wire staples or steel pins etc. All as specified (Each line of wire to be measured.)

M&L two coats of synthetic enamel paint to new steel surfaces over a coat of red oxide primer surfaces of any description exc 10 cm in width or girth

M&L preparing new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer surface area not exc. 10cm in width or girth

Demolition of brick work built in cement mortar including all arches, pillars all quoins etc complete all as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plain exc. 6m mean radius built in CM 1:6

M & L for 15 mm thick plaster in CM (1:4) on fair faces of brick work or concrete surface with sponge finish. complete all as specified and as directed by engr-in-charge.

M&L for preparation of newly plastered surface of walls and applying two coats of cement base paint complete all as specified.

M & L for PCC 1:3:6 type using 20 mm stone aggregate in coping

M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in bed to drain pipes, incl packing under & haunching against the sides of pipes after they are laid and tested for 300 mm bore RCC pipe.

M&L for reinforced cement concrete pipes class NP-3 , laid in trenches & jointed complete with collars, dia of pipe 300 mm .

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof /wall covering of tin sheds complete all as specified

Dismantling structural steel work from and including doors, gates or of any description but excluding framed truss etc complete all as specified. Note :- dismantling of plain/corrugated sheets from doors and gate will be measured separately in particular item of sheet dismantling.

Demolition of plain cement concrete in ground floors n.exc 15cm thickness and removing debris outside MD land all as specified

M & L for hot rolled mild steel in wind ties for roof including securing bolts, posts and struts in fencing etc. of Fe 410 (Gde-E-250) complete

M&L for bands, straps, bolts, supports or stays for rainwater, ventilating pipes , including bolts, if required hooks (stay), heavy, wall ties; plain angle cleats for securing purlins to wood/iron trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to FE290 gde -e-165 all as specified

M & L for Rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)Fe-410 gd E-250 quality B

M & L for Mild steel, plain, black sheet (1.0mm thick) 16gauge in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

S & F 0.5 mm thick pre painted/coloured galvalume Al zin coating GI based corrugated steel sheet of an colour having tensile strength of 550 Mpa as in roofing fixing all as per manufactures instructions fixed on roof with all fittings and accessories.

Ditto as per item- 29 above but plain sheet as in ridge, etc

S & F Machine pressed 1.00 mm thick plain, galvanise, mild steel sheeting in valley gutters (Trapezoidal shape), drips and straight clashings (length and girth fixed) with grade of zinc coating 275.

Material and labour for Welding in repairs exc 2.5 cm but n.exc 5 cm in length , thickness of Metal to be welded exc. 6 mm but not exc. 9mm complete all as specified and as directed

M & L 50 mm thick PCC type B1 1:2:4 (20mm graded aggregate) in flooring complete all as specified and directed.

S & F in repairs of 125 mm long Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed.

S & F in repairs of 150 mm long MS handle stove enamelled black, complete all as specified and directed.

S&F in repairs 375 mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate fixed with screw or welding complete.

S&F 4.0 mm th sheet glass ordinary quality plain and glazing with oil putty in square n'exc .5 sqm in each pane including hacking out old glasses all as specified and as directed.

Excavation over areas in soft loose soil n.exc. 1.5 m deep and etc complete

M & L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded aggregate) in subbase for hardstanding incl all necessary formworks complete all as specified and directed.

M&L for 150mm thk Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete incl all necessary formworks all as specified and as directed.

M & L for Removing building materials from MoD land etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of exc 1km but n.exc 5km, beyond the lead included in the rates, including loading, unloading and stacking at the destination all as specified and as directed by Engr-in-charge

M & L for two coats of synthetic enameled paint on old steel surfaces exc 10cm width or girth including preparation of surfaces, complete all as specified and as directed by Engr-in-charge

Samyak Engineers

H S TAKHI

B.T.DONGARE CONSTRUTION

RAMESH PATIL

DR J S CHADHA AND SONS

Santhi Enterprises

Dinesh Constructions