Beautification and faceliftment of Nidubrolu Bridge by Providing Central Lighting in Ponnur Municipality.

Cutting and open of C.C. Road surface including stacking of excavated materials as per the ditections of the departmental authorities.

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

Dust Filling of foundation trenches as per drawing and technical specification in Clause 305.3.9 MORD & 304 MORTH

Plain Cement Concrete (1:4:8) using 40mm Graded metal with concrete mixture including cost and conveyance of all materials, labour charges, machine mixing charges, laying, vibrating and curing etc., complete as per S.S. for bed concrete

Supply and placing of the VRCC M-25 Grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. (BLD-CSTN-2-14)

Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded

Fabrication, Transportation and supply of hot-dip galvanized Octagonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with hinged door opening arrangement, including the supply of suitable boards with bakelite sheet as per IS specification suitable to withstand the wind speed of 180 KMPH for 7.5 Mtrs height Pole having dimensions Bottom 130 mm,. Top 70mm with 3mm thick, base plate 220 x 220 x 12mm and 4 Nos of M20 x 700 long 'J' bolts along with template. Makes: As per list of recommended brands.SSR NO : 25-26 , S.No : 337 , ELEC : 6.1.4

Foundation and erection charges with special T&P, for 7.50 Mtrs long Octagonal /Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.45Mtr x 0.45Mtrs x1.20 Mtr size M20 cc work vibrated concreting mixing with necessary steel (10kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost and conveyance of materials etc., complete. SSR NO : 25-26 , S.NO : 365 , ELEC : 6.1.31

Fabrication, Transportation and supply of 1.5 Mtr Length Single Arm suitable size decorative galvanized bracket with PU paint colour finish etc complete. (The design should be approved from field Engineers). SSR NO : 25-26 , S.No : 348 ,ELEC : 6.1.15

Supply and transportation of 120W LED Street light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass / temperature protective polycarbonate diffuser, supply input voltage 120 - 270V AC, P.F > 0.90, high power LEDs having System Efficacy >= 120 lumens/watt and junction temperature < 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-3), driver surge protection 4KV, in-house additional Surge protection 10 KV with optics distribution, THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I SSR No 25-26 , S.No: 142 , ELEC : 3.8.24(b)

Supply of 3 core, 2.5 Sq mm ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990.Makes: As per list of recommended brands as category I SSR No : 25-26 , S.NO : 31 , ELEC : 1.5.4(l)

Supply and transportation of 16 Sq mm X 4 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: As per list of recommended brands as category I.SSR No : 25-26 , S.NO : 160 , ELEC : 4.1.1 (f)

Supply and Transportation of Outer dia 50mm and Inner dia 38mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Makes: As per list of recommended brands.SSR No : 25-26 , S.NO : 178 , ELEC : 4.3.1 (a)

Supply and transportation of 50 Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: As per list of recommended brands as category I.SSR No : 25-26 , S.NO : 160 , ELEC : 4.1.1 (i)

Supply and delivery of PVC Junction Box material with 10 Amps SP MCB- 1 NO , 32 Amps "B" Connector with 10 Amps SP MCB , 32 Amps 'B' Connector - 1 No , Hylam Sheet and Other necessary items etc Complete.

Labour Charges for fixing of 120W Led Street Light fittings including Commisioning and testing Charges etc Complete.

Laying of HDPE Pipe , U.G Cable and Covering with 4" X 4" M30 Cement Concrete including cost and conveyance of all Materials, labour Charges etc., Complete.

Supply and delivery of 20MM Base Plate with 20MM Thick 16" X 16" X 20MM thick Welded with 4 Nos ,15MM Cross M.S Plates including Welding , Painting with one Coat Zinc Oxide , 2 Coats Silver enamil Paint including lifting and all labour Charges etc., Complete.

Supply , delivery and fixing of PVC Junction Boxes (Syntex , National or Equalent) Size of 9" X 7" X 4" Depth including 32 Amps 'B' Connectors - 1Nos, and 10 Amps SP MCB - 2Nos and fixing to Pole with 1 Set of M.S Flat (Size of 20 MM X 4 MM)Clampset - 1Set (2 NOs) including necessary Bolts and Nuts , Tansportation and all Labour Charges Etc Complete

Dismantling of old 9 mtrs poles with gas cutter and hydraulic crane equipment including transportation and all labour Charges etc Complete.

Labour Charges for lifting of poles and fixing of fittings including Commisioning and testing Charges etc Complete.

Supply and delivery of LED Rope Lighting. ( Makes Wipro , Stur light , Fourson or equalent)

Supply and delivery of PVC /cotton tape Role (8 Mtrs) SSR No : 25-26 , S.NO : 666 , ELEC - 8.1.15

Supply of 1.5 Sq mm ISI marked FRLS/ FRLS-H / HFFR / ZHFR PVC insulated flexible copper cables 1100V grade as per IS: 694/1990 & IS:17048/2018 specification for copper cable. Makes: As per list of recommended brands as category I SSR NO : 25-26 , S.No : 28 , ELEC : 1.5.1(b)

Labour Charges for Laying of LED Rope With Hydraulic Crane Equipment including Commisioning and testing Charges etc Complete.

Supply and Delivery of 50mm GI ‘B’ Class Pipe including all Transporatation and labour charges etc., complete.SOR Pg.No-877

Laying of GI Pipe, Cables and refilling with 6" X 6" M30 Cement Concrete including Trench cuting in B.T Roads including all labour charges etc., complete

Providing concrete for plain/reinforced concrete (M15) in open foundations using 20 mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH

Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials, inlcuding cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.