REPAIRS TO ROOF TREATMENT AND MISC B/R WORKS UNDER AGE B/R-I, GE (AF) NO 02 JODHPUR

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for (roof padding, flooring above ground floors) including roof treatment and removing from site complete all as specified and directed.

M&L for 50 mm thick (average) cement concrete 1:3:6 type C-0 mix (12.5 mm graded stone aggregate) in padding over roof etc., complete all as specified and directed.

M&L for 10 mm thick rendering in CM 1:3 over concrete surfaces (Roof) mixed with water proofing compound @ 3% by weight of cement complete all as specified. NOTE : Water proofing compound shall be measured and paid for separately as “Supply only”

Supply only integral water proofing compound ISI marked.

M&L for complete removal of existing old App membrane treatment from roof surface complete all as specified and as directed.

M&L for applying roof treatment on top of roof with APP modified membrane (minimum 3 mm thick) with non-woven polyester reinforcement/mat (centre core) with thermal insulation with white mineral gravel finish on upper side of membrane laid by torch application method with overlaps 100mm on length side and 100 mm on the width side as per manufacturer’s instructions over and including a coat of approved cold applied bituminous oil based primer (IS- 3384) @ 250 gm/sqm over cleaned roof surface complete all as specified and as directed.

Disconnecting existing tanks, any capacity, setting aside (or lowering if required) for repairs of roofs and hoisting if required, reconnecting and re-fixing in position complete all as specified and directed. Note : Repairs to roofs if any should be measured & paid separately.

Disconnecting existing tanks of any description exc. 250 ltrs and n.exc. 500 ltrs capacity and removing from site.

Disconnecting existing tanks of any description exc. 500 ltrs and n.exc. 1000 ltrs capacity and removing from site.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top thread type cover), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight of ball valve - 210 gms).

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top thread type cover), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight of ball valve - 210 gms).

Taking up or down steel tubing 15mm bore and connections including cleaning for re-fixing or removing from site.

Taking up or down steel tubing 20mm bore and connections including cleaning for re-fixing or removing from site.

Re-fixing old steel tubing, 15mm bore, and connections with new or old position such as walls, ceiling, floors, etc. complete all as specified and directed. Note :- Steel tubes obtained from item No. 12.00 above shall be used under this item.

Re-fixing old steel tubing, 20mm bore, and connections with new or old position such as walls, ceiling, floors, etc. complete all as specified and directed. Note :- Steel tubes obtained from item No. 13.00 above shall be used under this item.

Supply and laying 15mm bore tubes, galvanized steel, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed.

Supply and laying 20mm bore tubes, galvanized steel, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed.

S&F in repair for 110 mm PVC(SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, walls height upto 12.0 m with required number of PVC clamps incl fixing complete all as specified & directed. Make: Prince or supreme or equivalentt make specified in Appendix ‘B’.

S&F in repair for 110 mm bore PVC (SWR) bend, suitable for type ‘A’ pipes, any radius.

M&L for providing PCC, type C1 1:3:6 (20 mm Aggregate) cement concrete in roof kerbs or mud stops, rounded or chamfered on edges.

S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 15 mm dia complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20 mm dia complete all as specified and directed.

AAI NATH ENTERPRISES

POOJA CONSTRUCTION

GANGADHAN ENTERPRISES

Aksher Construction Company

M/s Sati Jasnath Enterprises

Savitri Enterprises

JAMWAY MATA CONSTRUCTION COMPANY