Police

STRUCTURE AND ROOFING: SUPPLY AND FIXING OF SHED WITH SUPPORTED BY 100MM*100MM* (MS) MAIN COLUMNS (APOLO) (C 4MM THICK AND TOP 6MM THICK 150MM*150MM & BASE PLATE 12MM THICK 200MM*200MM AND LOCKING WITH ANCHOR BOLT. TRUSSUS: VERTICLE AND HORIZONTAL AND RIGHT ROUND 40MM *60MM MS RECTANGLE PIPE 2MM MIDDLE SUPPORT 40MM*40MM MS SQUARE PIPE 2MM THICK AND ROOF UNDER 50MM*50MM MS SQUARE PIPE 2MM THICK. PAINTING: ONE COAT ZINK PRIMER AND ONE COAT ASIAN RUSTURED PAINT ROOFING: ROOF SHEET 0.5 ZINDAL INDIA COLOR COATED SHEETS, SUPPORTED AND SELF TAPPING HP HEAD SCREWS ROOFING AND HARDWARE. INCLUDING;1 LOADING 2. UNLOADING 3. TRANSPORTATION 4. LIFTING 5.WASTAGE 5. LABOUR CLASS ROOM SHED SIZE: 33'*40' & TOILET SHED 10'*16'

75MM SOLID PANEL PARTITION: SUPPLY AND FIXING OF PANEL TRIPLE ADVANTAGE FIRE, WATER AND TERMITE RESISTANCE ECO FRIENDLY AND 100% ASBESTOS FREE FIBER CEMENT FACING SHEET AND THE CEMENTIOUS CORE ARE BONDED TO FORM A COMPOSITE PANEL WITH AN EXCELLENT STRENGTH AND HARDWARE AND BY USING 0.8 GI C' CHANNELS AT BOTTOM FOR SUPPORT USING USG BORELE JOINENT COMPOUND AND SAINT GOBAIN TAPE JYPROC AND HARDWARE. INCLUDE MS FABRICATION SUPPORT & INCLUDING;1 LOADING 2. UNLOADING 3. TRANSPORTATION 4. LIFTING 5.WASTAGE 5. LABOUR

CEILING: SUPPLY SUPPLY AND FIXING OF V-MARVEL DESIGN USING 4MM THICK, (TRIPLE ADVANTAGE BOARD) ) TERMITR, WATER & FIRE RESISTANT (MANUFACTURED AS PER IS 14862:2000) MANUFACTURED BY VISAKA INDUSTRIES LIMITED WITH PLAIN 24MM POWER COATED GRID CHANNELS. INCLUDING;1 LOADING 2. UNLOADING 3. TRANSPORTATION 4. LIFTING 5.WASTAGE 5. LABOUR

MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING AND CURING BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. SUPERSTRUCTURE WALLS 225 MM THICK FIRST FLOOR (APSS NO. 501&504).

PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK. FIRST FLOOR (APSS NO: 901&904)

FLOORING WITH NANO POLISHED /STAIN FREE SOLUBLE SALT PORCELAIN VITRIFIED TILES SCREEN PRINTED OF SIZE 600 X 600 MM AND THICKNESS BETWEEN 8-10 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, SET OVER BASE COAT OF CEMENT MORTAR (1:8), 12 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE TO FULL DEPTH MIXED WITH PIGMENT OF MATCHING SHADE, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILES ETC., COMPLETE, INCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK, . -FIRST FLOOR

PROVIDING AND APPLYING SYNTHETIC PLASTER PUTTY OR EQUIVALENT PUTTY SUCH AS BIRLA WALL CARE PUTTY OF AVERAGE 1 TO 2 MM THICK OVER PLASTERED SURFACE TO PREPARE THE SURFACE EVEN AND SMOOTH AFTER THOROUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, APPLYING EMERY PAPER, SAND THE SURFACE, CLEAN & WIPE OFF LOOSE DUST, APPLYING, KNIFING PASTE FILLER BY PUTTY KNIFE / MUSLIN PAD, AIR DRY FOR 2-3 HRS., SAND WITH 180 AND 320 NO. EMERY PAPER FOR THE SURFACE PREPARATION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR INTERNAL WALLS.

PROVIDING AND APPLYING SYNTHETIC PLASTER PUTTY OR EQUIVALENT PUTTY SUCH AS BIRLA WALL CARE PUTTY OR TEXTURE PAINT OR EQUIVALENT SUCH AS NCL / SAICOAT TEXTURE PAINT OF AVERAGE 2 TO 3 MM THICK OVER PLASTERED SURFACE TO PREPARE THE SURFACE EVEN AND SMOOTH AFTER THOROUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, APPLYING EMERY PAPER, SAND THE SURFACE, CLEAN & WIPE OFF LOOSE DUST, APPLYING, PUTTY / TEXTURE PAINT FILLER BY PUTTY KNIFE / MUSLIN PAD, AIR DRY FOR 2-3 HRS., FOR THE SURFACE PREPARATION INCLUDING ACESS SCAFFOLDING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR EXTERNAL WALLS.FIRST FLOOR

SUPPLYING AND FIXING MS TUBES FOR FOR TRUSSES & PURLINS IN ALL SIZES AS DIRECTED BY THE ENGINEER-IN- CHARGE INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE AND LABOUR CHARGES FOR FABRICATION, FIXING ETC., COMPLETE FOR THE FINISHED ITEM OF WORK M.S.TUBES OF ALL SIZES for Stair Case

PROVIDING AND FIXING FACTORY MADE UPVC WHITE COLOUR SLIDING GLAZED DOORCOMPRISING OF UPVC MULTI-CHAMBERED FRAME WITH IN-BUILT ROLLER TRACK ANDSASH EXTRUDED PROFILES DULY REINFORCED WITH 1.60 ± 0.2 MM THICK GALVANIZEDMILD STEEL SECTION MADE FROM ROLL FORMING PROCESS OF REQUIRED LENGTH (SHAPE & SIZE ACCORDING TO UPVC PROFILE), APPROPRIATE DIMENSION UPVCEXTRUDED GLAZING BEADS, UPVC EXTRUDED INTERLOCK AND UPVC EXTRUDEDINLINE SASH ADAPTOR (IF REQUIRED), EPDM GASKET, WOOL PILE, ZINC ALLOY(WHITE POWDER COATED) HANDLE WITH KEY ON ONE SIDE OF EXTREME PANELS ALONG WITH ZINC PLATED MILD STEEL MULTI POINT LOCKING HAVING TRANSMISSIONGEAR WITH KEEPS, ZINC ALLOY (WHITE POWDER COATED) CRESENT LOCK (IFREQUIRED), STAINLESS STEEL (SS 304 GRADE) BODY WITH ADJUSTABLE DOUBLENYLON ROLLERS (WEIGHT BEARING CAPACITY TO BE 120 KG), G.I FASTENERS 100 X8 MM SIZE FOR FIXING FRAME TO FINISHED WALL AND NECESSARY STAINLESS STEELSCREWS ETC. PROFILE OF FRAME & SASH SHALL BE MITRED CUT AND FUSION WELDEDAT ALL CORNERS, INCLUDING DRILLING OF HOLES FOR FIXING HARDWARE'S AND DRAINAGEOF WATER ETC. AFTER FIXING FRAME THE GAP BETWEEN FRAME AND ADJACENT FINISHED WALL SHALL BE FILLED WITH WEATHER PROOF SILICON SEALENT OVER BACKERROD OF REQUIRED SIZE AND OF APPROVED QUALITY, ALL COMPLETE AS PER APPROVEDDRAWING & DIRECTION OF ENGINEER IN-CHARGE INCLUSIVE OF COST OF SINGLE / DOUBLE GLASS PANES,WIRE MESH AND SILICON SEALENT . (A)TWO TRACK TWO PANELS SLIDING DOOR MADE OF (BIG SERIES) FRAME 67 X 50 MM & SASH 46 X 82 MM BOTH HAVING WALL THICKNESSOF 2.3 ± 0.2 MM AND SINGLE GLAZING BEAD / DOUBLE GLAZINGBEAD OF APPROPRIATE DIMENSION. (AREA OF DOOR ABOVE 2.00 SQM UPTO 5.00 SQM) SSR ITEM NO:: BMT-N.85.A

DOORSHUTTER : 1.5X2.13 M: SUPPLY, POSITIONING AND FIXING OF WPC DOOR SHUTTER, , INCLUDING 3 NOS. OF 125 MM BUTT HINGES, 2 NOS. 125 MM LONG DOOR HANDLE, 1 NO. ALDROP OF SIZE 250 MM LONG, 2 NOS. OF 200 MM LONG TOWER BOLTS, WITH BOLTS, NUTS, NF SCREWS, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR MAKING THE FRAME AND SHUTTER, MINOR EXTRA FIXTURES REQUIRED IF ANY AS DIRECTED BY THE ENGINEER-IN-CHRGE OF THE WORK ETC., COMPLETE FOR FINISHED ITEM OF WORK. (ALL FITTINGS AND FIXTURES SHOULD BE OF ALLUMINUM, ISI MARK, GOT APPROVED BY THE ENGINEER-IN-CHARGE) (APSS NO: 1001&1002).

PAINTING TO NEW WALLS WITH 2 COATS OF PLASTIC EMULSION PAINT OF APPROVED BRAND AND SHADE OVER A BASE COAT OF APPROPRIATE PRIMER OF APPROVED BRAND, MAKING 3 COATS IN ALL TO GIVE AN EVEN SHADE AFTER THOURUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO WORK SITE AND ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC. COMPLETE FOR FINISHED ITEM OF WORK AS PER SS 911 FOR INTERNAL WALLS.

PAINTING WITH EXTERIOR EMULSION PAINT OF APPROVED MAKE (ACE FROM ASIAN PAINT) AND COLOUR TO THE EXTERIOR FACES OF WALLS AS DIRECTED 2 COATS BY DILUTING 1 LIT. OF EMULSION PAINT WITH A MAXIMUM 750 ML OF WATER WITHIN AN INTERVAL OF NOT LESS THAN 6 HOURS BETWEEN TWO COATS OVER 1 COAT OF EXTERIOR WALL PRIMER BY DILUTING 1 LIT. OF PRIMER WITH 1 LIT. OF WATER (TOTAL 3 COATS) WITH SURFACE PREPARATION ETC., AS PER STANDARD SPECIFICATION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, BRUSHES, LABOUR CHARGES, CURING, SCAFFOLDING AND ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK IN ALL FLOORS. (APSS NO.908).

PAINTING TO NEW IRON WORK TWO COATS WITH SYNTHETIC ENAMEL PAINT OF APPROVED BRAND AND SHADE OVER ONE COAT OF RED OXIDE PRIMER COAT (TOTAL 3 COATS) INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL INCIDENTAL, OPERATIONAL & LABOUR CHARGES FOR PREPARING AND CLEANING THE SURFACE OF DIRT WITH SOAP AND BRUSHES, INCLUDING PUTTY, ETC., COMPLETE FOR FINISHED ITEM OF WORK. (APSS NO.1201, 1207, 1212).

PAINTING TO NEW WOOD WORK TWO COATS WITH SYNTHETIC ENAMEL PAINT OF APPROVED BRAND AND SHADE OVER ONE COAT OF WOOD PRIMER COAT (TOTAL 3 COATS) INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL INCIDENTAL, OPERATIONAL & LABOUR CHARGES FOR PREPARING AND CLEANING THE SURFACE OF DIRT WITH SOAP AND BRUSHES, INCLUDING PUTTY, ETC., COMPLETE FOR FINISHED ITEM OF WORK. (APSS NO.1201, 1207, 1212).

SUPPLY AND FIXING OF 20MM OUTER DIA (2.10 MM THICKNESS) HEAVY GRADE WITH IS:9537 PART 3 FRLS REGID SURFACE P.V.C. PIPE (ISI MARK) WITH ALL ACCESSORIES FIXING ON CHROMIUM PLATED METALLIC BASE SADDLES INCLUDING ALL LABOUR CHARGES ETC., COMPLETE FOR RUN OF MAINS.MAKES :(MAKES: PRECISION/UNIVERSAL& MARUDHAR/VIP / SUDHAKAR).

SUPPLY AND LAYING OF P.V.C CASING AND CAPING (ISI MARK) WITH DOUBLE LOCKING ARRANGMENTS WITH GROOVER TRUNKING OF SIZE NOT BELOW 12.5MM HEIGHT 31/32MM SIZE WITH ALL ACCESSORIES, DULY SEALED AT POINTS AND ERECTED ON WALL / CEILING INCLUDING COST OF ALL MATERIALS AND LABOUR CHARGES COMPLETE.(MAKES: PRECISION/UNIVERSAL& MARUDHAR/VIP / SUDHAKAR).

WIRING WITH 2 RUNS OF 14/0.3MM (1.0 SQ.MM) FIRE RETARDANT LOW SMOKE FRLS / HFFR PVC INSULATED 1100V GRADE AS PERIS:694/1990 SPECIFICATION FLEXIBLE COPPER CABLE IN EXISTING PIPE WITH 6A ONE WAY MODULAR SWITCH WITH 6 MODULAR COVER FRAME, 3 PLATE CEILING ROSE INCLUDING ALL LABOUR CHARGES ETC., COMPLETE FOR LIGHT, BELL, FAN AND EXHAUST FAN POINTS IN NON RESIDENTIAL BUILDINGS. WIRE MAKE: (FINOLEX/RR KABEL/HAVELLS/ FORTUNEARRT) CEILING ROSE: ANCHOR/ GOLD MEDAL OLIVE /MILLION ZOOM. SWITCHES & COVER FRAME MAKE: LEGRAND (MYRIUS/LYNCUS) / SCHNEIDER (CLIPSAL X/ LIVIA AB)/ CRABTREE (MURANO/ ATHENA) / LAURITZ KNUDSEN - ENGLAZE ( FORMERLY L&T) / HONEYWELL (BLENZERO)

SUPPLY AND FIXING OF 16/20A 2 MODULAR 1 WAY SOCKET - 2NOS WITH SHUTTER AND 16A / 20A 1 WAY MODULAR SWITCH-2NOS DULY RECESSED IN WALL 6 MODULAR COVER FRAME INCLUDING EARTH CONNECTIONS AND ALL LABOUR CHARGES ETC., COMPLETE. SWITCHES & COVER FRAME MAKES: LEGRAND ARTEOR / SCHNEIDER ZEN CELO/ CRABTREE MURANO OR DUCOR /L&T-ENGLAZE/ GM-(FOUR-FIVE)/ GOLDMEDAL(GIFA)

SUPPLY AND FIXING DISTRIBUTION BOARD WITH 20A SINGLE PHASE PLUG AND SOCKET, IN SHEET STEEL ENCLOSURE WITH 10/16/20A SP MCB INCLUDING INTERNAL CONNECTION AND LABOUR CHARGES FOR SURFACE / FLUSH MOUNTING ETC., COMPLETE

SUPPLY AND RUN OF LAN CABLE CAT - 6 UTP CABLE IN EXISTING PVC CONDUIT INCLUDING COST AND CONVEYANCE OF ALL MATERIALS AND LABOUR CHARGES ETC., COMPLETE. MAKES:D LINK / AMP / MOLEX / LEGRAND / KRONE.

SUPPLY INSTALLATION TESTING AND COMMISIONING OF1NO OF CAT6 TOOLESS BUILTIN CRIMPING MECHANISM INFORMATION OUTLET WITH DUST COVER EXCEED ANSI/TIA-568-C.2 AND ISO/IEC 11801 STANDARDS WITH 1MODULE FACE PLATE FOR CATEGORY 6 COMPONENT PERFORMANCE & COMPATIBLE TO T568A,T568B WIRING PATTERN AND UL-940V0 RATED PLASTIC &ROHS COMPLIANT MAKES: SYSTIMAX /AMP/ PANDUIT/ SIEMOND/ MOLEX/LEGRAND

SUPPLY AND RUN OF 3 OF 36 /0.3MM (2.5 SQ.MM) FRLS / HFFR/ZHFR P.V.C. INSULATED 1100V GRADE AS PERIS:694/1990 SPECIFICATION FOR INSULATED FLEXIBLE COPPER CABLE IN EXISTING PIPE FOR RUN OF CIRCUITS, POWER PLUGS & COMPUTER BOARDS INCLUDING ALL LABOUR CHARGES ETC., COMPLETE. ( FOR PHASE NEUTRAL AND EARTH) ( CIRCUIT MAINS TO SWITCH BOARD) MAKE:FINOLEX/RR KABEL/HAVELLS / FORTUNEARRTA

SUPPLY AND RUN OF 3 OF 56/0.3MM (4 SQ.MM) FRLS / HFFR/ZHFR PVC INSULATED 1100V GRADE AS PERIS:694/1990 SPECIFICATION FOR COPPER CABLE IN EXISTING PIPE FOR MAINS INLCUDING ALL LABOUR CHARGES ETC., COMPLETE.( FOR PHASE NEUTRAL AND EARTH) [FROM DISTRIBUTION BOARD MAINS TO16A SOCKETS]. MAKE:FINOLEX/RR KABEL/HAVELLS / FORTUNE ARTA

SUPPLY AND FIXING OF 36W/40W (600MM X 600MM) SQUARE TYPE LED SLIM PANEL SUITABLE FOR RECESSED / SURFACE MOUNTING MADE OF DIECAST ALLUMINIUM BODY WITH POWDER COATING, ACRYLIC DIFFUSER WITH DRIVER AS PER IS: 15885 (PART 2/ SEC 13) : 2012 , OPERATING VOLTAGE-VENTURE RANGEVENTURE OF 150 TO 265 VOLTS AC, P.F > 0.9, SURGEVENTURE PROTECTION: 2KV,THD<10%, WITH HIGH POWER LED'S HAVING EFFICACY OF > 100 LUMINS/WATT,CCT: 3000K - 5700K, MINIMUM CRI>70, .ETC., COMPLETE. A) LUMINAIRE MAKE : PHILLIPS / GE- VENTURE / CROMPTON / WIPRO / BAJAJ / HAVELLS / HALONIX/JAQUAR/HPL/GM / GREENLITES / GOLD MEDAL/EVEREADY/ FORTUNEARRT B) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/EVERLIGHT.

SUPPLY AND FIXING OF BATTEN HOLDER / SLANTING HOLDER IN LIEU OF CEILING ROSE OF LIGHT POINT COMPLETE WITH ALL CONNECTIONS AND ALL LABOUR CHARGES WITH 7W LED, 490LUMENS BULB (FOR NEW INSTALLATION). HOLDER MAKE: ANCHOR / GOLD MEDAL OLIVE / MILLION ZOOM LAMP MAKE:PHILLIPS / OSRAM / GE / CROMPTON.

SUPPLY OF 2TR 1.8/1.9/2.0TR, 3 STAR CAPABLE OF DELIVERING NOT LESS THAN 21600 BTU/HR AND ABOVE WITH OPERATING ON REFRIGERANT R-410A / R-32 NVERTER MODEL COOL TYPE SPLIT AC UNIT WITH HIGH WALL MOUNTED SINGLE SPLIT INDOOR UNIT AND OUTDOOR CONDENSING UNIT HERMETICALLY SEALED COMPRESSOR SUITABLE FOR OPERATION ON 230V, 50HZ, 1PHASE AC SUPPLY CAPABLE OF PERFORMING HEAT COOL DEHUMIDIFYING AIR CIRCULATING AND FILTERING WITH COOLING AND CONDENSING UNITS WITH 3 MTS OF COPPER PIPING, INSULATION KIT AND 4 MTS OF 4 CORE COPPER FLEXIBLE CHORD WITH CORDLESS REMOTE CONTROL ETC., DUAL BARRIER COATING IN ORDER TO PROTECT COIL FORM OXIDATION.MAKES: MITSUBISHI / O GENERAL / TOSHIBA (PREVAILING MODELS IN THE MARKET)

INSTALLATION OF SPLIT AIR CONDITIONERS.(INSTALLATION OF SPLIT AIR CONDITIONERS.)

SUPPLY OF 5.0 KVA1-PHASE, AUTOMATIC ELECTRONIC VOLTAGE STABILIZER.MAKES: V-GUARD / REAL GUARD / UNI STAB / ITL.

SUPPLY AND FIXING 6WAY TPN D.B WITH BOARD WITH IP-43 PROTECTION SUITABLE FOR THREE PHASE40A FP MCB/ ISOLATOR/ RCCB / ELCB - 1 NO FOR INCOMER, 10KA-6-32A SP MCBS - 12NOS FOR OUTGOING. INCLUDING INTERNAL CONNECTION AND LABOUR CHARGES FOR SURFACE / FLUSH MOUNTING ETC., COMPLETE.(FOR PDB)MAKE: LEGRAND(EKINOX 3) / SCHNEIDER-A9 / SEIMENS / LAURITZ KNUDSEN ( FORMERLY L&T)- NEWRANGE. MCB MAKE: LEGRAND- DX3/ SCNEIDER - A9/ SIEMENS - 5SX4 / LAURITZ KNUDSEN ( FORMERLY L&T)- AU.