SPL REPAIR OF ROAD INSIDE MH AND GE OFFICE COMPLEX AT ROORKEE UNDER GE ROORKEE

Amount

M & L for repair to pot holes not exc 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in road, paths etc cutting around edges to at least 25mm in depth, but making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings).depth of potholes n exc 30 mm complete all as specified and directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n. exc 400 sqm and exc 50 mm and n exc 100 mm deep

M & L for 7.5 cm thick ( compacted thikness) WBM, with lime stone, sand stone, Flint or quartzite coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consoildated to gradient and camber reqiured.

M&L for preparing Unsurfaced water bound macadam surfaces by brushing with hard wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, complete all as specified and directed.

M&L for applying evenly a priming/tack coat with bituminous primer @ 10 Kg/10 Sqm, using paving bitumen complete all as specified and directed.

M&L for preparing black top surfaces by brushing with hard wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, complete all as specified and directed.

M&L for applying evenly a priming/tack coat with bituminous primer @ 5 Kg/10 Sqm, using paving bitumen complete all as specified and directed.

M & L for premix bituminous, macadam using paving bitumen of grading VG-10 laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using paving bitumen with 4% by weight of total mix complete all as specified and dierected.

M & L for bituminous premixed semi - dense asphaltic concrete 30mm consolidated thickness with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient all as specified and directed using paving bitumen of grading VG 10 laid with mechanical paver complete all as specified and directed.

M & L for applying thermoplastic reflective paint as in road marking 02 mm thick single coat as in centre line or edge line road marking of 150 mm width using HOT MARK thermoplastic paint (HOT application) white by indigeneous modem propelled road marking method as directed incl all ingredients such as binder glass beads Titanium-dioxide calcium carbonate lintar fillers thermoplastic requirement for glass beads shall be as per Table No 800-4 specification incl spraying of glass beads instructions complete all as specified and directed.

S&F in repairs 100X100X25 mm road stud cat eye made of aluminium moulded two No's reflectors in red / Yellow / white fixed on two sides for maximum ratro reflection of approved make complete all as specified and directed. (Make : DARK EYE/ AVERY/Alcolite)

S & F in repairs solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directedas per manufactures instructions in red / yellow /white of approved quality complete all as specified and directed. ( Make : DARK EYE / AVERY / ALCOLITE)

S/F yellow and black plastic speed bump made of Oscar ABS plate material, highly reflective reflectors mould in PMMA, material welded with ABP plate through ultrasonic welding process etc, size of the speed bump is 0mm of 40 ton load capicoty on road incl epoxi for fixing speed bumbs on road at different places with necessary bolts /nuts etc, all as specified and as directed by Engineer- in- Charge.

Demolition of Plain cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removal of debries from site.

M&L for 75mm thick cement concrete type D- 2, 1:4:8 using (40mm graded aggregate) complete all as specified and directed.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, or bigger size, with grey cement and pigment, set , jointed and pointed in neat cement slurry over 15mm thick screed bed in CM 1:4 as in floors complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in coping complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with gray cement and no pigment.

All as per item No 19 here-in-before but with grey cement and pigment.

GAYATRI CONSTRUCTION

Maa Vaishno Enterprises

M/s MAA SHAKTI CONSTRUCTIONS AND SUPPLIERS