PERIODICAL SERVICES TO SECURITY WALLS,REPAIRS TO CONCERTINA COIL,BARBED WIRE,CHAIN LINK FENCING,ANGLE IRON POST,STEEL GATES ETC. INCLUDING PAINTING IN TECHNICAL AREA AT AF STN TEZPUR UNDER GE (AF) TEZPUR.

Amount

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for,complete all as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed.

Dismantling fencing wire mesh,any type,complete all as directed.

Dismantling barbed wire,galvanised, 2 strand,2.00mm dia barbed at 75mm spacing,complete all as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section,embedded in natural ground,including taking out embedded portion and making good disturbed ground,complete all as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section,embedded in concrete,masonry,brickwork etc.,including taking out embedded portion and making good disturbed ground,complete all as directed.

Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc.,complete all as directed.

Dismantling galvanised steel concertina coil 600/750/900/1050 mm dia. having 50-53 turns and approximate weight 8.50-15.00 Kg stretched to cover a distance of 5-7 running meter from existing mild steel fencing posts,complete all as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil , complete all as specified and directed.

Materials and Labour for plain cement concrete (1:4:8) Type D-2 using 40 mm graded aggregate,in foundations, filling and mass concrete, complete all as specified and directed.

Materials and Labour for plain cement concrete (1:3:6) Type C-2 using 40 mm graded aggregate,in foundations, filling and mass concrete including demolition of existing cement concrete (un reinforced),complete all as specified and directed.

Materials and Labour for plain cement concrete (1:2:4) type B1 using 20 mm graded aggregate in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary from work and including demolition of existing cement concrete (un reinforced),complete all as specified and directed.

Materials and Labour for reinforced cement concrete M 25 Design Mix using 20 mm graded aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete,complete all as specified and directed.

Materials and Labour for reinforced cement concrete M 25 Design Mix using 20 mm graded aggregate in columns, pillars,piers, posts and struts, complete all as specified and directed.

Materials and Labour for brick work with Sub Class ‘B’ bricks straight or curved on plan exceeding 6M mean radius built in cement mortar (1:6), complete all as specified and directed.

Use and waste of form work to to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter for rough finished surfaces of concrete, flat, complete all as specified and directed.

Use and waste of form work to to sides of pillars,posts, struts, piers, column and stanchions,square,rectangular or polygonal,for fair finished surfaces of concrete, flat, complete all as specified and directed.

Supply and fix mild steel TMT bars 10 mm dia. and over, cut to length, bend to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed

Supply and fix mild steel TMT bars 5 mm dia. and over up to and including 10 mm dia. in stirrups, spacers, binders etc. cut to length, bend to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed.

Materials and Labour for mild steel works,hand rails, half round or other stock section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

Materials and Labour for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290, Grade E-165 including dismantling existing wrought iron or mild steel work of any description not otherwise provided forcomplete all as specified and directed.

Materials and Labour for, rolled mild steel Fe 410-W (Gde-E 250) Quality 'A', in joist, channel, angle, or tee sections,fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated),complete all as specified and directed.

Supply and Fix, mild steel screw bolts (machine made), with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, diameter of shank 11 to 15 mm, length of bolt exc.5 cm but n.exc.10 cm long, complete all as specified and directed.

Supply and Fix, mild steel round bars,Gde-I,IS 432(Part-I), 10 mm dia.,cut to length, bend to shape required including cranking, bending, hooking ends and securing to fencing post as in stiffners to GI Chain Link fencing, complete all as specified and directed.

Supply Only,galvanised mild steel plain wire, 3.15 mm/ 4 mm dia., complete all as specified.

Supply Only,Chain link MS galvanisd fencing, any size or type,complete all as specified.

Supply Only,barbed wire, galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings ,complete all as specified.

Supply Only, galvanised steel concertina coil 1050 mm dia. having 50-53 turns and approximate weight 15 Kg ± 5% and suitable to be stretched to cover a distance of 5-7 running meter, complete all as specified.

Fixing Only,chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts,etc.including provision of binding wire,complete all as specified and directed. Note:- Supply of chain link fencing and wire will be measured and paid seperately.

Fixing Only galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. , complete all as specified and directed. Notes:- (i) Each line wire will be measured. (ii) Supply of barbed wire and steel wire will be measured and paid seperately.

Fixing Only, galvanised steel concertina coil 1050 mm dia. having 50-53 turns and approximate weight 15 Kg ± 5% and suitable to be stretched to cover a distance of 5-7 running meter, complete all as specified. Notes:- (i) Overall length as laid will be measured. (ii)Supply of concertina coil will be measured and paid seperately.

Materials and Labour for rendering 15 mm thick, cement plaster, in cement mortar (1:4) on fair faces of brick work or concrete surface in wall, complete all as specified and directed.

Material and Labour for preparing new surfaces plastered or unplastered on walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm,on walls, complete all as specified and directed.

Material and Labour for complete removal of existing treatment, preparing surfaces on walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm,on walls, complete all as specified and directed. Notes:-(Applicable for Serial Item No.33 & 34) (i) Painting shall be done in camouflage pattern as per existing shade(s) and pattern(s). (ii) The Contractor shall furnish guarantee for the exterior acrylic emulsion paint and shall be responsible for effectiveness of the UV Resistance, Alkali & Fungal Resistance and Dirt Resistance of the painted areas during the guarantee period.

Material and Labour for applying one coat of synthetic enamel paint (ordinary tint) on old painted steel and iron surface of any description,over 10 cm in width or girth, not otherwise described, including preparation of surfaces complete all as specified and directed.

Material and Labour for applying one coat of aluminium paint (ordinary tint) on old painted steel and iron surface of any description,over 10 cm in width or girth, not otherwise described, including preparation of surfaces complete all as specified and directed.

Material and Labour for applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer on new steel and iron surface of any description,over 10 cm in width or girth, not otherwise described, including preparation of surfaces complete all as specified and directed.

Material and Labour for applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer on old painted steel and iron surface of any description,over 10 cm in width or girth, not otherwise described after complete removal of existing painting including preparation of surfaces,complete all as specified and directed. Notes:- (i) Painting shall be done in existing brackets for concertina coil of ISA fixed on top of RCC boundary walls. (ii) The quoted rate will be deemed to be inclusive for removing carefully existing galvanised steel concertina coil 600/750/900/1050 mm dia. having 50-53 turns and approximate weight 8.50-15.00 Kg stretched to cover a distance of 5-7 running meter from existing brackets and relaying the same in original position after completion of painting works.

Material and Labour for applying one coat of synthetic enamel paint (ordinary tint) on old painted steel and iron surface of any description,n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint, including preparation of surfaces complete all as specified and directed.

Material and Labour for preparing surfaces of steel and iron work, new or old,of any description and girth not otherwise described treating ends of posts etc.,area tarred exc 0.1 sq. m but n exc 0.5 sq. m each and treated with tar or coal tar black paint,complete all as specified and directed.

M/s Singh Furniture Mart