PROVISION OF CYCLIST PEDASTRIAN PATHWAY FROM OUTER GATE TO MAIN ENTRANCE GATE AND PROVISION OF VIEW CUTTERS ALONG THE BOUNDARY WALL AT INS EKSILA UNDER AGE BR II OF GE ND VISAKHAPATNAM

Amount

Surface excavation not exceeding 30cm deep and averaging not exc 15cm deep and getting out in soft / loose soil complete all as directed

Removing excavated material /soil to a distance exceeding 250m but not exceeding 500m and depositing where directed complete all as specified and directed

M & L for PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as directed.

M & L for PCC 1:2:4, type B-1, using 20mm graded stone aggregate as in cast in lintels upto 1.5m span, copings, bed blocks for hold fasts, bed plates, roof kerbs and similar work including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and directed.

M & L for 100mm thick, PCC 1:2:4, type B-2, using 40mm graded stone aggregate as in hard standing, PCC path finished even and smooth without using extra cement complete all as specified and directed.

M & L for Machine pressed precast cement conctete coloured interlocking paver block with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade over and including 50mm thick sand filling complete all as specified and directed.

M & L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 using old size bricks complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed.

S & F mild steel work as in Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directetd.

M & L for preparation of new or previously untreated steel surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.

Excavation in trenches not exc 1.5m wide and depth for foundations, laying of cables, pipe etc n.exc 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.

Removing excavated material /soil to a distance exceeding 1.5Km but not exceeding 5.0Km and depositing where directed complete all as specified and directed

M & L for PCC 1:2:4, type B-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated / 'Z' profile steel sheet of 0.50mm thick, any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/ 'j' hooks and bols complete all as specified and directed.

S & F rolled mild steel work as in Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc conforming to Fe 410-W (Gde-E-250) quality- A complete all as specified and directed.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm but not exc 10cm long and diameter of neck 5 to 10mm complete all as specified.

RL ENTERPRISES

K NAGARAJU

P SRINIVASA RAO

Balaji Enterprises

GATREDDY APPALA NAIDU

SRI BALAJI NURSERY

B.Veerabhadra Rao