ADDN ALTN IMPROVEMENT TO CERTAIN SMQS AT OLD

Amount

Taking down chowkats or frames (without taking of shutter from the frame) not exc. 1.5 Sqm each complete all as specified and as directed

Taking down chowkats or frame exc 1.5 Sqm and n exc 4 Sqm each (without taking off shutter from the frame) all as specified and as directed.

Taking down shutter only of any description n exc 1Sqm all as specified and as directed.

Taking down shutter only of any description exc 1Sqm n. exc 2Sqm all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing the rubbish outside MD land complete.

Taking down cement plaster any description on brick or stone wall/ celling including raking out joint, hacking for key scrubbing with water etccomplete all as specified and as directed.

Taking down 15 mm bore GI water tubing including all fitting complete from wall/floor all as specified

Taking down 20 mm bore GI water tubing including all fitting complete from wall/floor all as specified

Taking down 25 mm bore GI water tubing including all fitting complete from wall/floor all as specified

Dismantling water tanks n exc 500ltr capacity in any position iincluding necessary connection complete all as specified

Demolition of brickwork or stone/ boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified

Demolition of stone slabs and tiles of any description, laid bedded and pointed in any mortar.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for.

Dismantling of CI drain pipes 75/100mm internal dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

M&L Anti termite treatment by injecting chemical emulsion along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.

M&L Anti termite treatement at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same

M&L Anti termite treatment of soil under existing floors using emulsion @ one litre per hole,300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

M&L PCC 1:2:4 Type B-0 using 12.5mm graded aggregate laid to slope 1:30 in padding for WPT over roof slab, filling of pressed steel door frame complete all as specified and directed by Engineer-in-Charge.

M&L PCC 1:2:4 Type B-0 using 12.5mm graded aggregate as in cover fillet of 75 mm radius at junction of roof slab and parapet wall etc complete all as specified and directed by Engineer-in-Charge.

Supply only integral water proofing compound.

M&L Brick work with sub class 'B' bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6 complete all as specified

M&L 30mm thick 2nd class hardwood glazed and skeleton shutter open rebated and prepared to receive glass gauze etc (without sash bar ) edges of framing plain chamfered or rounded filled with cut and mitred beads for securing, glass etc size of member of shutter as per specified in SSR Part-I section 8,clause 8.24(a) supplied and fitted to chowkats and directed by Engg. In Charge.

M&L 35mm thick 2nd class hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both face. The size of rail and style as per IS:1003(Part-I), kiln seasoned and chemically pressed treated and all as Specified and as directed by Engineer- in -Charge.

M&L 25mm thick factory made flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides as in CB shutter complete all as specified and as directed..

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing specification and drawing complete

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete

S&F 75mm long SS butt hinges and fixed to frame with screwed or welding complete..

S&F 200mm long aluminium anodized barrel tower bolts of extruded section and fixed.

S&F 150mm long aluminium anodized barrel tower bolts of extruded section and fixed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified

S&F for 150mm long aluminium handle cast type anodized all as specified and as directed by Engineer-in-Charge.

S&F Hasp and staple, safety type aluminium anodized including bolt to hinge plate and fixed with screws 150 mm size complete all as specified and directed.

S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified

S&F Stainless steel wire cloth 0.36mm nominal dia wire and average width of aperture 1.14mm and fixed with powder coated aluminium beading/wood beading complete all as specified .

S&F Stainless steel wire cloth 0.36mm nominal dia wire and average width of aperture 1.14mm and fixed with powder coated aluminium beading/wood beading complete as in repairs all as specified and directed

S&F 25 mm dia curtain aluminium powder coated drapery rod decorative type cut to length and fixed complete as in repairs all as specified and directed

S&F Bracket suitable for 25mm dia curtain rod with steel screw/ wooden screw complete as in repairs all as specified and directed

S&F Towel Rail 20mm dia , 600mm long CP fixed with and including chromium plated brass screws and wooden/plastic cleats complete as in repairs all as specified and directed

M&L Pressed steel frames(105 X 60) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

M&L Pressed steel frames(125 X 60) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as as specified,

S&F Powder coated aluminium door, windows and ventilators and partition wall with one or more rebates fixed in position as per manufacturer's instruction including necessary joining cleat, glazing clips, rubber packing, beading ,plaster work on edges during fixing (if required) etc complete all as specified and directed. Note :Weight of aluminium section only shall be measured for payment purpose

M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L Filling surface cracks not exc 5 mm to 7 mm wide with "Dr Fixit" cracks X power or equivalent polymer mollified cracks filler all as per manufacturer instructions and as directed

Removing of existing unserviceable water proofing treatment taking down cement plaster etc, of any description and cleaning of top surface of cement concrete flushing out junction of parapet walls & washing down with water to remove all dirt etc including preparation of surfaces to receive new treatment and removing the rubbish off premises.

M&L Applying cold bituminous primer @ 0.30 Ltr / Sqm conforming to IS 3384 laying APP polymer modified membrane 3mm thick 3 Kg/Sqm in weight with non-woven polyester reinforcement with plain finish and sealing all overlaps of 75mm in length side and 75mm on width side of membrane by torching the same as per manufacture instruction and all as per particular specification including application of solar reflective aluminium paint all as specified and directed by Engr-in Charge Note:- (a) Rate quoted deemed to be inclusive of cleaning of surface to be treated properly to receive the primer and all as directed by the Engr-in-Charge. (b) Necessary guarantee certificate shall be given by the manufactures for the material for 10 years from the date of completion of work. (c) APP membrane treatment shall be done firstly at corners and junction of parapet wall 30cm on vertical position and 30cm on horizontal position shall be done with proper attention and work carried out by authorised applicator only. Main portion of roof treatment shall be commenced only on completion of corners/edges/junctions. (d) APP membrane shall be taken upto outside of the parapet wall to an extent of 150mm minimum. (e) Ensure while laying the treatment no bulging on surface/voids shall be found and proper care/attention be given for the treatment. (f) If any work executed at site without any authorised applicator, the same shall be rejected and no payment shall be consider. (g) Contractor shall produce the certificate from the manufacturerer for the authorised applicator before commencement of work.

M & L Cement concrete 75mm thick as in plinth protection type C- 2, 1:3:6 (40mm graded aggregate) finished even and smooth without using extra cement.

M&L Machine cut cudappah stone slab flooring 40mm thick over and cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab in single piece as in cooking platform etc.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab as in steps, landing etc including rubbing and polishing complete over 15mm thick cement screed base in CM 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab all as specified

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 SQM but not exceeding 0.38 SQM,as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 SQM but not exceeding 0.38 SQM, as in skiting,/ vertical surfaces etcset and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 SQM but not exceeding 0.11 SQM, aas in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L Glazed ceramic coloured tiles in vertical surfaces 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L10mm thick plastring in CM 1:4 mixed with WPT 3% by weight of cement finished even and smooth with out using extra cement on roof surfaces for laying WPT complete all as specified and as directed by Engr-in-Charge.

M&L 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes all as specified and directed.

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 to receive tiles etc on vertical surfaces of walls all as specified and directed.

M & L 10 mm thick rendering in CM 1:6 on concrete surfaces / fair faces of brick masonry wall, finished even and smooth with thin layer of sagol.

M & L 15 mm thick rendering in two layer 10mm thick backing coat in CM 1:6 and finishing coat 5mm in CM 1:4 using water proofing compound on faces of brick masonry wall, finished even and fair etc complete.

M&L Rendering 5mm thick on concrete surface of ceiling CM 1:3 finishing the surface fair and even complete all as specified and directed.

M&L Preparation of new plastered surface of wall and applying two coats of exterior acrylic emulsion paint over a coat primer complete all as specified and directed.

M&L Preparation of new surfaces of wall rubbing down and applying two coats of oil bound distemper over application of chalk whitening complete all as specified as directed

M&L Preaparation of new plastered wall surface and applying three coats of white wash on ceiling surface complete all as specified and directed

M&L Complete removal of existing treatment and apply two coats of exterior acrylic emulsion over a coat of primer complete all as specified

M&L Complete removal of existing treatment and applying two coats of oil bound distemper over application of chalk whitening complete all as specified as directed

M&L Preparation of old surfaces and apply 3mm thick putty on wall/ceiling finished complete all as specified

M&L Complete removal of existing treatment and applying three coats of white wash on walls complete all as specified as directed by Engineer -in-Charge.

M&L Complete removal of existing treatment and applying three coats of white wash on ceiling complete all as specified as directed by Engineer -in-Charge.

S&F 4mm thick Sheet glass, ordinary quality and glazing with glazing clip and powder coated aluminium beading in square n exc 0.5 sq. m in each pane complete all as specified

S&F 4mm thick Sheet glass, ordinary quality and glazing with glazing clip and powder coated aluminium beading in square n exc 0.5 sq. m in each pane complete as in repairs all as specified

M&L Preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified

M&L Preparation of new steel surfaces and applying with 2 coats synthetic enamel paint of any description, over 10cm in width or girth, not otherwise described over a red oxide primer complete all as specified

M&L 15mm bore GI water tubing medium grade in any length including all fittings fixed to wall or laid in floor complete all as specified

Fixing only 15mm bore GI water tubing medium grade in any length including all fittings fixed to wall or laid in floor complete all as specified

M&L 20mm bore GI water tubing medium grade in any length including all fittings fixed to wall or laid in floor complete all as specified

Fixing only 20mm bore GI water tubing medium grade in any length including all fittings fixed to wall or laid in floor complete all as specified

M&L 25mm bore GI water tubing medium grade in any length including all fittings fixed to wall or laid in floor complete all as specified

Fixing only 25mm bore GI water tubing medium grade in any length including all fittings fixed to wall or laid in floor complete all as specified

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15mm bore pipe as in repairs complete all as specified.

S & F Bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe as in repairs complete all as specified. .

S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed to15mm bore pipe as in repairs complete all as specified.

S&F Chromium plated shower roses of 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete as in repairs complete all as specified.

S&F 500 ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted complete all as specified.

S&F 20 mm ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed.

S & F Vitreous china wash hand basin, flat back, size 450x300mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete as in repairs all as specified and as directed.

S&F, Vitreous China squatting pan, Orissa pattern of size 580x440mm, white with integral foot rest including connection to trap & flushing pipe complete as in repairs all as specified and as directed. .

S&F Vitreous china pedestal pattern white (excluding fixing both flushing cistern and flush pipe) complete all specified complete as in repairs all as specified and as directed.

S&F Plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinged device fixed complete as in repairs all as specified and as directed.

S&F 10 litres capacity PVC valve less symphonic action type, flushing cistern, low level, white, with inlet, ball valve float handle including brackets complete as in repairs all as specified and as directed.

S&F 32mm brass chromium plated waste coupling for wash hand basin all as specified

S&F 32/40mm PVC waste pipe for wash hand basin., 600mm long complete as in repairs all as specified and as directed.

S&F PVC connection 15mm size with PTMT nuts of length 60cm complete all as specified and as directed.

S & F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed..

M&L Treatment to sunken portion including demolition of existing tiles and PCC of sunken floor and provn of 40mm thick PCC 1:2:4 type B1as top layer and 10mm thick plaster in CM 1:4 with WPC Liquid comp last 421 in bottom and sides of sunken potion and applying one coat each of Nitroproof 100 and Nitroproof 120 on plastered surface. Rendering with 10 thick plaster in CM 1:4 mixed with complas 421 in sunken portion of WC as in second layer including jointing of CI pipe joint , provn of GI spout with 40mm dia pipe up to 30cm with water tight joint from the external surface of wall and filled with PCC 1:5:10 type E2 as lean concrete up to the required level as directed by Engr in Charge

S&F CI soil waste vent and rain water pipe 75 mm bore (ISI Marked) in any length with or without ears with cement joint laid in floor/fixed to wall complete all as specified and directed.

S&F CI soil waste vent and rain water pipe 100 mm bore (ISI Marked) in any length with or without ears with cement joint laid in floor/fixed to wall complete all as specified and directed.

S&F Cast iron floor trap 75 mm outlet dia with grating including jointing to waste pipe fixed in cement concrete type B1, (1:2:4) complete as in repairs all as specified and directed.

S&F 100mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches.

S&F 75mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches.

S&F 100mm bore bend (any radius) with duck foot or heel rest.

S&F 75mm bore bend (any radius) with duck foot or heel rest.

S&F Sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified

S&F SS plate rack 1mm thick of Size 31"x36"x10" Code No 1049 fixed in position complete all as specified

Excavating in post holes each n exc. 0.50 cum getting out in soft/loose soil and removing surplus soil to a distance n exc 50m & making good surface complete all as specified.

M&L PCC 1;4:8 type D-2 using 40 mm graded stone aggregate as foundation filling mass concrete complete all as specified and as directed by Engr- in- Charge

M&L Joist, channel, angle, flat or Tee section fixed independently, without connecting plate ,including cutting tops to shape as directed, drilling holes, notching for wire, etc.; and flat iron 40x6mm (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 as in fencing post complete all as specified

Supply only Chain link MS galvanised fencing, any size or type

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire

Supply only MS round bar 10mm dia and over as in line wire for fencing mesh conforming to Fe-290 (Gde E- 165) complete all as specified

S&F Mild steel screw bolts (machine made), 10mm diameter of neck, with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long all as specified

S&F Mild steel , FE- 290 (Gde E-165) Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

Taking down carefully unserviceable aluminium/ copper point wiring (light, fan,socket or power) complete, including fixtures and fittings such as switches, ceiling rosees, pendants, regulators , sockets, etc., removing materials to stores for keeping in safe custody for taking credit and making good the disturbed surfaces of walls,ceilings etc.

M&L Concealed Point wiring complete with 1.5 sqmm single core PVC insulated and PVC unsheathed (FRLSH) multistranded copper conductor cable 1100 volt grade enclosed in and including heavy duty rigid PVC conduit of size min 20 mm dia with accessories fixed in concealed surface including chase cutting including ss sunken boxes for mounting of modular switches, sockets fan regulators etc including modular cover plate concealed in walls etc including 1.5 Sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable as earth continuity conductor to common earth dolly.

(a)One light point controlled by one one/way switch.

(b) One Fan/Ex fan point controlled by one one/way switch.

(c) One 3 pin 5 Amps socket outlet on same board with other switch.

(d) One 3 pin 5 Amps socket outlet on independent board with other switch.

(f) One bell point controlled by one one/way bell push.

(g) One light point controlled by one two/way switch.

All as per item No.110 above but wiring with 2.5 sqmm multistranded copper conductor unsheathed and 2.5 sqmm copper conductor unsheathed cable as earth continuity conductor for one 5 pin 15 Amps power socket outlet point on independent board.

M&L Concealed Point wiring complete with 4 sqmm single core PVC insulated and PVC unsheathed (FRLSH) multistranded copper conductor cable 1100 volt grade enclosed in and including heavy duty rigit PVC conduit of size min 20 mm dia with accessories fixed in concealed surface including chase cutting including 4 Sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable as earth continuity conductor for one ac point . Note AC Metal clad box will be measured and paid separately.

M & L Sub main wiring using two single core 6 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawing in and including PVC Casing Caping /PVC Conduit or in existing concealed conduit(as required & directed by Engr-in-Charge)accessories like bends, tee, etc fix on wall and ceiling and connecting to earth dolly and including 6 Sqmm earth wire, PVC insulated & unsheathed all as directed.

S&F Modular switch 1 way 6A, 1 module one way 5 Amp 240 Volts.

S&F Modular bell push 1 way 6A, 1 module one way 5 Amp 240 Volts.

S&F Modular switch 16A 1 module complete all as specified and directed.

S&F Modular switch 2 way 6A, 1 module 240 Volts.

S&F Modular Socket, 6A - 2/3 pin combined 2 modules,240 Volt. Complete all as specified and directed

S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Ceiling rose surface bakelite three terminal 65 x 50 mm three terminal 250/230 volts ISI marked

S&F Door bell Ding Dong AC. 230 volts, single pole ISI marked complete all as specified and directed.

S&F Stepped/ electronic fan regulator heavy duty typeA/C 240 V.

S&F DB's Sheet metal enclosure for SPN DB 12 way type 240 volts and 200 Amp ratings bus bar complete all as specified and directed.

S&F MCB in the DBs given below :-

(a). MCB SP up to 32 Amp, 240 volts

(b). MCB SPN upto 63 Amp, 240 volts

S&F 20 Amp Industrial metal clad plug in socket and plug top with 20 amp SP MCB complete all as specified and directed.

S&F Exhaust fan 300 mm sweep 240 V AC single phase complete with lovers and shutters of any sweep including provision of flexible three core copper conductor cable of 23/0.0076 up to ceiling rose and grouting 04 Nos full threaded bolts and nuts etc all as specified Note: All necessary arrangement such as wooden frame/cut in existing window frame or making hole in existing wall and making the disturbed surfaces as per existing are included inquoted rate.

S&F Integrel sleek extruded batten aluminium /CRCA channel fitting with LED T8 T/L 20 watt complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz, complete all as specified and directed.

S&F LED Tubelight fitting aluminium body ENERGY Efficient 10 Watt 2000 lumen bright light with 25000 burning hours complete all as directed by Engr-in-charge. Make : CAT PART NO HLB-08-20-CW-INV of Hallonix or equivalent in Phillips, C&S, orient,Havells,Syska.

S&F LED light fitting 14 W,230V decorative wall mounting type with multicolour ABS housing with poly carbonate rings and glass shade with lamp holders connector block, etc complete with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.Cat No: LHFOECE1TZ1O014 in Havells or equivalent in Bajaj, Philips

S&F LED security light luminaire 35 Watt freedom, pressure die cast aluminium housing, heat resistant glass, IP65 protection, better optics for uniform distribution complete with all accessories internally pre wired and including GI pipe bracket medium grade of size 25 mm dia and 600 mm long with anchor hold fastener and clamp, connecting up with three core 1.0 sqmm flexible copper conductor cable from ceiling rose to connector of light complete.

S&F Ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. Note: Each plant should be measured and paid separately .

Taking out existing serviceable electronic meter and refxing in new meter box panel complete all as specified and directed

Taking out existing unserviceable ceiling fan and deposited to E/M store yard at Darjipura complete all as specified and directed

S&F Electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, SS flexible connection pipe, including grouting of nuts and bolts for fixing arrangement and making surface good all as specified and directed Make:- Havells/Bajaj/Polycab/CG/AO Smith. Note att necessary arrangement for fixing of geyser such as drilling/anchor hold fastener included in item rates.

Supply and install, testing and commissioning meter box suitable to install 4 Nos single phase electronic meter in separate compartment made out of 2 mm thick CRCA sheet duly powder coated, including 200 Amps rating 4 nos copper bus bar chamber, including power wiring with using PVC insulated stranded copper wire of size 10 sqmm duly provided lugs from busbar to meter and meter to control MCB with provisioning transparent glass in front of meter complete rubber gasket and locking and sealing arrangement including following MCCB/MCB (a). Incomer MCCB 4 pole 100 Amps 16 KA - 01 Nos (b). Outgoing MCB SPN 63 Amps - 04 Nos (c). Outgoing MCB SPN 10 Amps - 01 Nos (d). Indicating Lamp RYB - 1 Set

Excavation in trenches not exceeding 1.5m width and not exceeding 1.5 m in depth and getting out inany type of soil complete all as specified and directed

Removal of excavated material to a distance not exceeding 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge.

Returning, filling excavated soil in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each all as directed by Engineer-in-Charge.

M&L Dry sand cushioning to underground cable with screened, washed river sand, including punning gently all as specified and directed. Note - Thickness of sand cushioning after punning down shall be measured and paid for under this item

Supplying and laying bricks; common burnt clay building bricks, sub-class ‘A’ designation of size 230mm x 115mm x 75mm. in trenches abutting each other with equal to length of brick for cable protection all as specified

S & F High density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq. cm 50 mm bore light grade with all fittings, fixing on wall included supporting clamp /laid in trenches for cable protection all as specsified and directed.

M & L Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground earth pit not less than 2.25 mtr deep below ground level connected to & including galvanised earth lead wire 4 mm dia by means of nuts and bolt check nuts and washers of galvanised rion sheet all as shown in electrical plate Nos 5 of SSR Part - I and connected to earthing test point complete including testing filling of adequate quantity of charcoal dust and common salt including refilling earth and removal of surplus soil upto 50 mtrs PCC 1:3:6 type CI chamber precast RCC cover 40 mm thick reinforced with 6 mm dia MS bar 3 Nos both way with handle made out of 6 mm dia MS bar water pipe with wire mesh and connecting testing etc complete all as specified and directed.

Supply and laying & testing 25 sqmm 3.5 core XLPE cable PVC insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable , (heavy duty), 1100 volts grade with stranded aluminium conductor complete all as specified and directed.

M&L Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including GI pipe of 50 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed.

M&L Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed.

S & F 20 mm bore gun metel gate/globe valve with iron wheel head,screwed both ends for iron pipe and fixed complete all as specified and directed . Note: Rate of union/socket included in item rate.

M&L Cutting into existing steel tubing for dia 40/50 mm dia alterations or additions (Each cut measured) complete all as specified and directed.

M&L Cutting or making hole/ making same the disturbed surfaces or wall complete all as specified and directed by Engr -in-Charge

M&L Screwing into existing steel tubing of dia 25 sqmm for alterations or additions complete all as specified and directed.

Harsh Infrastructure

AUM STRUCT BUILD PVT LTD