GENERAL

Engaging of JCB on Hire Basis including driver wages & Helper wages including fuel Charges and all type of charges etc., complete

Augoring and boring of holes in site for BORED CAST-IN-SITU R.C.C PILES for building foundation in loamy, clayey soils like black cotton soils and ordinary soils without under reams as per is 2911-1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery ,augerbore drill and shell equipment, etc, complete for all depths and finished item of work for piles of following diameters.

Under - reaming for BORED CAST-IN-SITU R.C.C PILES for building foundation in loamy, clayey soils like black cotton soils and ordinary soils without under reams as per is 2911-1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery ,auger bore drill and shell equipment, etc, complete for all depths and finished item of work for piles of following diameters.(BULBS)

Supply and placing of the VRCC M-20 Grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all materials , operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.

Supply and placing of the Design Mix Concrete for M-20 Grade corresponding to IS 456 using CONCRETE MIXER with 20mm H.B.G Metal including cost and conveyance of all Material like cement, Sand, water etc., to site, operational, incidental and Labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete (APSS No.402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc., complete (BLD-CSTN-2-14)

for plinth beam

Providing High Yield Strength Deformed (HYSD) steel bars (Fe 415/ Fe 500 grade as per IS 1786 ) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126).

Brick Masonary in C.M (1:6) using 2nd Class well burnt ground moulded traditional size bricks of locally available having a crushing strength of not less than 35 Kg./Sq.Cm & size of 23x11x7 Cm including cost & conveyance of Material to site, mixing of Cement Mortar & laying of bricks & mortar to specified thickness, watering, curing, including all scaffolding, hire & operational charges of Machinery, all Labour charges & all water lead charges etc. complete for finished item of work. (BLD-CSTN-3-1)

Plastering with 12mm thick in single coat in CM (1:4) finished smooth including cost and conveyance of all materials to site, seigniorage charges on all materials, finishing, curing, scaffolding and all operational, incidental, labour charges etc., including cutting grooves where ever necessary etc., complete for finished item of work. (As per SS 903).

Ceiling Plaster: Ornamental Plastering 12mm thick in two coats, first with 8mm thick in C.M (1:6) prop and second with 4mm thick in C.M (1:3) prop including cost and conveyance of all Material to site, Screening and mixing, laying finishing with sponge finish and watering, curing including all Labour charges ,hire and operational charges etc., complete for finished item of work - 10 Sq.M.

Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 1 Coats (All Colours)(Total 2 Coats)

Manufacture,supply and delivery and fixing of Iron grill for gates made with M S flat of approved design including painting with primary coat of red oxide etc., complete.

Painting with Synthetic enamil paints two coats for new Iron Work including cost and conveyance of materials and all types of labour charges etc., complete as approved by the departmental authorities

Filling of Stone Crusher Dust for foundation trenches including cost and conveyance off all materials and all labour charges ramming,watering etc, as per drawing and technical specification in Clause 305.3.9 MORD & 304 MORTH

Providing concrete for plain/reinforced concrete (M10) in open foundations using 20 mm Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH. (For Bed)

Construction of granular sub-base (GSB) by providing Well graded material for Grading III mixing in a Mechanical Mix Plant at OMC carriage mixed material to work site spreading in uniform layers with motor grader on prepared surface and compacting with 80-100 kN Vibratory Roller to achieve the desired density, complete as per Technical Specification of MORTH.

Providing, laying, spreading and compacting graded HBG Crushed stone aggregate to Wet mix macadam specification including cost, seigniorage of all material and including premixing the material with water at OMC in mechanical mixer Plant carriage of mixed material by tipper to site, laying in uniform layers with paver in base course on well prepared surface and compacting with Vibratory roller of 8 to 10 to achieve the desired density etc., as directed by the Engineer-in-Charge and as per MORTH & H Specification for finished item of work. (RBR-SBBS-11)

Laying of Plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 / 53 grade at cement as per Clause 1501.2.2 M30 (Grade) at 400 kg per cum, coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, near approaches to bridge / culvert and construction joints, and curing of concrete slabs for 14- days and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD. Culverts approaches

Bailing out water from the pipe line trenches with 5 HP oil engine driven pump sets, including hire charges, fuel charges and wages for Driver and Helper.

Supply and fixing of M.S structure steel i.e., angles, chaneels & I sections and its fabricatin charges etc., complete - 1 Kg.

Supply and delivery of C1 greetings for burning platform including fixing, cost and conveyance of all labour charges etc., as LS

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks BMW-G.01

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) BMW-I.221

Collection and supply of water supply and sanitary specials of approved quality and approved by the executive authority from source of supply to site of work and fixing in position and all other labour charges etc., complete.

Supply, installation and testing of UPVC Drain Piping with 6mm Nitrile Rubber class "O" Insulation covered with interwoven glass cloth protection.Necessary pipe fittings(Including enlarger, bends, T Joints etc) has to be considered to connect the UPVC drain pipe to cast iron floor trap. ELEC-5.6.21

Supply of 22/0.3mm (1.5 Sqmm) FRLS / HFFR / ZHFR PVC insulated 1100V grade as per IS : 694 / 1990 specification for Copper cable. Makes: Finolex / RR kabel / APAR E-beam ELEC-1.5.2

Wiring with 2runs of 14/0.3mm (1.0Sq mm) Fire retardant (FR) PVC insulated flexible copper cable (ISI MARK) Polycad/ Havells/ Sun Cab/Gold Medal/ Million/Fortune Art/Paragon/HPL/L&T/Power Flex/RPG/Anchor/Boton in existing pipe with 6A Modular switch,with Suitable metalic gang box, Ceiling rose Complete for light, Bell and Fan points Non-Residential Buildings Legrand.

Supply of 1 x 36/40W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessories. Makes: Wipro / G.E. / Phillips / Crompton / Bajaj .ELEC-3.6.1

Supply & Fixing of 8 Modular Cover Frame . Makes: Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus. (ELEC-1.8.3)

Fabrication, transportation and supply of 12 Mtrs Polygon High Mast with single section of 3mm thick of Bottom 360mm and Top 150mm dia with BSEN - 10025 grade S 355 JO steelFabrication, transportation and supply of 12 Mtrs Polygon High Mast with single section of 3mm thick of Bottom 360mm and Top 150mm dia with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate,having a base plate of size 520mm dia 16mm thick with its accessories.Mast shall be in single section for 12 Mtrs and 2 sections for 16 and 20 Mtrs. Mast shall be hot dip galvanized and suiatble for wind velocity of 180 KMPH as per IS 875 part 3 including head frame, 2 point suspension system with steel rope 6mm dia (7/19)construction double drum winch /power tool operating speed of 900 RPM, and necessary cable trailer connections and single speed motor with M24 x 800 mm foundation bolts of required quantity, suitable for 6 luminaires with GLS type aviation twin lamp.Makes : As per list of recommended brands.

Supply and transportation of 210W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's System efficacy >110 lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, In house additional Surge protection 10 KV with optics distribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete . Makes : As per list of recommended brands as category I.

Supply and fixing of suitable out door type feeder piller box made with 14 SWG CRCA sheet after 7 tank process including S & F 40-63A FP MCB, 9 Nos SP MCB's,din chanel, bus bars, 6 Sqmm 3 core copper cable for internal wiring , contactor, connectors and provision for energy meter etc., complete for finished item of work. Makes : As per list of recommended brands.

Supply and transportation of 16 Sq. m.m. 4 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)./1554-I.Makes: Torent / Universal / Unicab / Havells / KEI / Gloster / Polycab /RR Kabel.

a)S & F50mm Nominal Bore GI pipe Light Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete

Providing independent earthing for Important equipment with 40 mm dia Heavy gauge C.I ( Cast iron ) pipe with Flange 1.5m long enclosed in R.C.C pipe/ brick massonry chamber of 150m x 150m x 200mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of suitable length with all accessories and labour charges complete. Rate based on (lowest quotations)

Supply and laying of following sizes Earth wire/Strip in horizontal /Vertical run in Ground/surface/Recess including, revitting,soldering,saddles,making connection etc as required

Drilling of Bore well by down the hole hammer drilling to a finished dia of 112/165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I & II 1979 and amended from time to time.

Supply and Delivery of 160mm Dia O.D.PVC Pipe (6 Kgf) duly slotted to full for casing including cost of couplng etc

Supply and Delivery of 160mm Dia O.D.PVC Pipe (6 Kgf) for casing including cost of coupling etc

Supply and Transportation of.,5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply,etc complete for 4" Bore well. Makes : As per list of recommended brands as category II.

5 hp 25stages pumopset

2.50 Sqm alluminium 3 core cable wire

Supply and delivery of water supply specials inclding labour charges etc, Complete

50 mm dia GI pipe

Rubber Packing sheet

Fabrication ,transportationand and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc.,complete consisting of the following equipment with all internal wiring using L&T /Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets.

supply and delivery of Bore Caps including cost and conveyence of all materials and all labour charges etc.complete

Provision for Seignorage charges

Provision Towards merit 2%

Provision Towards DMF 30%

Provision for NAC @ 0.10%

Provision for GST @ 18%

Provision for TPQA @ 0.739 %

Unforeseen item