REPAIRS REPLACEMENT OF CERTAIN WOODEN STEEL AND ALUMINIUM JOINERIES CUPBOARDS HARDWARE FITTINGS BIRD PROOF NETTING IN HANGARS AND TMS ETC IN CERTAIN BUILDINGS OF TECH AND ADM AREA AT AFA HYDERABAD

Taking down chowkats or frames with shutters exc 1.5 sqm but n exc 4 sqm each of any description (without taking off shutters from the frame) including necessary repair and making good the surface including complete jamb repair in full width of the wall as requred including PCC in 1:2:4 and finishing the surface with cement plaster 10mm thick in cement mortar 1:4 complete all as specified and as directed

Taking down chowkats or frames with shutters n, exc 1.5 sqm each of any description (without taking off shutters from the frame) including necessary repair and making good the surface, including complete jamb repair in full width of the wall as requred including PCC in 1:2:4 and finishing the surface with cement plaster 10mm thick in cement mortar 1:4 complete all as specified and as directed

S&F 1st class hard wood plain, solid, straight, chowkats and frame, wrought, frammed or rebated on the solid rounded or chamferred, put together with glue pinned at joints.

S & F for 35mm thik 1st class softwood plain, framed, panelled shutters (any number of panels), skeleton shutter for glazed door (feather edged), supplied and fitted to chowkats complete all as specified and directed.

S&F 35mm thick second class hard wood Plain framed, panelled shutter with lock rail . The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated

S&F of factory made 35 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F for 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted withcut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats

S & F solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with M S square tube complete all as specifid and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F solid PVC door frame of size 50 mm X 95 mm made out of 5 mm plain colour PVC sheet reinforced with M S square tube complete all as specifid and as directed.