SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF NEW FIRE FIGHTING SYSTEM IN WARD OFFICE BUILDING AT BHAIPURA WARD, EAST ZONE, AHMEDABAD

Name of Work:- SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF NEW FIRE FIGHTING

SYSTEM IN WARD OFFICE BUILDING AT BHAIPURA WARD, EAST ZONE, AHMEDABAD

Bill of Quantities

I. No. Qty Per Amount

Civil Work Estimate

1 Demolition & Dismantling work

Demolition of RCC work using Hydra Breacker

including stacking of servicable materials and

a 5.00 disposal of unservicable materials with all lead and 1047.38 Cu.M.

lift.Removal Of Existing Building Foundation and

Super Structure If Any.

Demolition of Brick work and stone masonry

including stacking of serviceable materials and

b 5.00 disposal of unserviceable materials with all lead 544.95 Cu.M.

and lift.(ii) In Cement Mortar.Removal Of Existing

Building Foundation and Super Structure If Any.

Dismentaling of sheet roofing including ridges,

Hips, Valleys, Gutters etc. stacking of serviceable

c materials and disposal of unserviceable materials

with all lead and lift.

i 5.00 (i) G.I.sheet roofing. 47.25 Sq.mt

ii 5.00 (ii) A.C. sheet roofing. 53.55 sq.mt

Dismentling steel work including distempering and

d 100.00 stacking the materials with all lead and lift. 3.63 Kg.

Dismentling doors, windows, ventilators etc. (wood

or steel) shutters including chowkhats architraves,

e 2.00 hold fasts and other attachment etc. complete and 185.85 Each

stacking them with in all lead and lift.

(i)Notexceeding 3 Sq.M. in area.

Removing & Scrapping of Old deteriorated Plaster

of any thickness from Masonary / R.C.C. member

f 25.00 including stacking of serviceable material & 19.38 Sq.M.

disposal of un serviceable from site of work with all

Dismentaling any type tiled of stone floors laid in

mortar including stacking of serviceable materilas

g 10.00 and disposal of unserviceable materials with all 47.25 Sq.M.

Excavation for foundation including sorting out

stacking of useful material & disposing of

2 excavated stuff upto 50 mt. lead. Loose & Soft

soil.Excexuted With Mechanical Effort

a 245.00 up to 1.5 mt. depth 115.92 Cu.M.

b 240.00 1.5 to 3.0 mt. depth. 128.52 Cu.M.

c 200.00 3.0 to 5.0 mt. depth 141.11 Cu.M.

Add extra for Disposing off the excavated stuff of

d 600.00 above items for lead of (A) 50 m to 100 m 17.28 Cu.M.

Add extra for Disposing off the excavated stuff of

e 100.00 above items for lead of (B) 100 m to 200 m 34.56 Cu.M.

Provdg. & laying cement concrete 1:3:6 (1 cement

: 3 coarse sand : 6 hand broken stone aggregates

3 40 mm nominal size) and curing complete

excluding cost of form work in

43.00 (A) Foundation and plinth 2976.00 Cu.M.

Provdg. & laying cement concrete 1:4:8 (1 cement

: 4 coarse sand : 8 hand broken stone aggregates

4 5.00 40 mm nominal size) and curing complete 2653.67 Cu.M.

excluding cost of form work in foundation& plinth.

Filling available excavated earth (excluding rock) in

trenches, plinth, sides of foundations etc. in layers

5 620.00 not exceeding 20 cm. in depth consolidation each 129.10 Cu.M.

deposited layer by ramming and watering.

Conveyance charges of earth lime, murrum,

building rubbish, manure, garbage, sludge,

6 excavated rock, fly ash, aggregate of any kind etc.

a 100.00 Conveyance charges 0 km to 1 km 46.63 Cmt

b 100.00 Conveyance charges 0 km to 2 km 60.69 Cmt

c 400.00 Conveyance charges 0 km to 5 km 100.44 Cmt

Extra For Lead on Above Item Above 5 km & upto

Extra For Lead on Above Item Above 6 km & upto

Extra For Lead on Above Item Above 7 km & upto

Extra For Lead on Above Item Above 8 km & upto

h 400.00 Extra For Lead on Above Item Above 9 km 9.26 Cmt

Filling in plinth with sand under floors including

7a 15.00 watering, ramming, consolidating, compacting and 455.63 Cu.M.

dressing etc. completed.

Filling in foundation and plinth with murrum or

selected soil in layers of 20 cm. thickness including

7b 60.00 watering, ramming and consolidating etc. 286.20 Cmt

Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg/Sq.

8 cm. in cement mortar 1:6 (1 cement : 6 fine sand)

conventional brick

a 2.00 (a) in foundation & Plinth 3981.21 Cu.M.

b 5.00 Super structure Upto Floor Two Level 4253.46 Cu.M.

I.Half brick masonry in common burnt clay building

bricks having crushing strength note less than

9 Kg/Sq. Cm. in cement mortar 1:4 (1 cement :

coarse sand) using conventional brick in Super

structure upto floor Four level

a 5.00 All Floor Level 646.70 Sq.M.

Providing and laying controlled cement concrete of

M-25 Grade and curing complete, Excluding the

10.1 cost of form work, Scaffolding, cost of

reinforcement for reinforced concrete work For any

Height up to any FloorLevel.

a 1.00 Foundations,Raft,Footings,Mass concrete 4238.04 Cu.M.

b1 1.00 RCC Retaining wall at All Floor 4519.88 Cu.M.

Tie-Beam, Lintel , Beam- Bracket, Stair Case &

c1 1.00 Landing, Coping ,Slab, balcony, weather shed, loft 4496.07 Cu.M.

, any cantilever etc All Floor

d1 1.00 Columns,Pillars, posts and struts at All Floor 4593.91 Cu.M.

Providing and laying controlled cement concrete of

M-20 Grade and curing complete, Excluding the

10.2 cost of form work, Scaffolding, cost of

reinforcement for reinforced concrete work For any

Height up to Floor Four Level.

a 1.00 Foundations,Raft,Footings,Mass concrete 3977.88 Cu.M.

Tie Beam , Lintel , Beam- Bracket , Coping

b1 1.00 ,landing, Slab, balcony, weather shed, loft , any 4460.36 Cu.M.

cantilever etc at All Floor

c1 1.00 Column at All Floor 4558.20 Cu.M.

d1 1.00 Stair Case All Floor 5418.91 Cu.M.

Providing and laying in position Ready Mixed M250

grade concrete for reinforced cement conctere

work , using cement content as per approved

Design Mix manufactured in fully automatic

batching plant and transported to site of work in

transit mixer for all lead having continuous agitated

mixer, manufactured as per mix design of specified

grade for reinforced cement concrete work

including pumping of R.M.C. from transit mixer to

site of laying with all lead and lift, excluding the

10.3 117.00 cost of centering shuttering finishing and 4853.56 Cu.M.

reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to

accelerate/ retard setting of concrete, improve

workability without impairing strength and durability

as per direction of the Engineer - in charge.

Without Fly Ash (Min cement level as per latest IS

456 shall be maintained) (Cement level 450 kg )

Providing and laying in position Ready Mixed M200

grade concrete for reinforced cement conctere

work , using cement content as per approved

Design Mix manufactured in fully automatic

batching plant and transported to site of work in

transit mixer for all lead having continuous agitated

mixer, manufactured as per mix design of specified

grade for reinforced cement concrete work

including pumping of R.M.C. from transit mixer to

site of laying with all lead and lift, excluding the

10.4 10.00 cost of centering shuttering finishing and 4793.10 Cu.M.

reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to

accelerate/ retard setting of concrete, improve

workability without impairing strength and durability

as per direction of the Engineer - in charge.

Without Fly Ash (Min cement level as per latest IS

456 shall be maintained) (Cement level 400 kg )

Drilling suitable holes in reinforced or plain cement

concrete with power driven drill machine to a

minimum depth of 80mm upto 250mm in RCC

beams, lintels, columns and slabs to introduce

steel bars for sunshades/balconies including fixing

the steel bars in position using Hilti Chemical

HY200-R but excluding the cost of reinforcement,

all complete as per direction of Engineer-In-

a 10.00 8 mm Dia in 80 mm Deep & 12 mm Dia Drilling 183.52 Each

b 10.00 10 mm Dia in 100 mm Deep & 14 mm Dia Drilling 263.66 Each

c 10.00 12 mm Dia in 120 mm Deep & 16 mm Dia Drilling 343.80 Each

d 10.00 16 mm Dia in 160 mm Deep & 20 mm Dia Drilling 608.63 Each

e 10.00 20 mm Dia in 200 mm Deep & 25 mm Dia Drilling 1024.44 Each

f 10.00 25 mm Dia in 250 mm Deep & 32 mm Dia Drilling 1938.54 Each

Providing and laying controlled cement concrete

1:2:4( 1cement : 2 coarse sand : 4 Graded stone

11 aggregate 20 mm nominal size ) and curing

complete, Excluding the cost of form work and

reinforcement for reinforced concrete work in:

Foundations, footings, base of columns,grade slab

a 1.00 and mass concrete. 3923.53 Cu.M.

slab, landing shelves, Balconies, lintels, beams,

b 1.00 girders, and cantilever, up to aany floor level. 4012.47 Cu.M.

P/A Trimix with dewatering machine and floater

c 185.00 machine on constructed R.C.C. work incl. cost of 54.00 Sqmtr

machine and labour etc. comp. as directed.

Making 15 mm Groove in R.C.C work on road and

d 30.00 filling it with poly sulfied selant and finished it good 30.00 Rmt

incl. all labour charges etc. comp. as directed

Providing and laying and fixing 25 mm thick

expansion joint by hydrocell semi rigid UV

e 4.00 resistance with high performance laminated closed 738.13 Sqmt

cell polythene foam joint filler in sheet foam as

directed, etc. complete.

Providing form work in ordinary timber planking so

as to give a rough finish including centering,

shuttering, strutting and propping etc. height of

12 propping and centering below supporting floor to

celling not exceeding 4 M & removal of the same

for in situ reinforced or plain concrete work in

(A) Foundation, footings, bases of columns etc.

a 39.00 and mass concrete. 171.68 Smt

(B) Flat surface such as soffits of slabs, landing

b 87.00 and the like 252.00 Smt

(C) Vertical surfaces such as walls (any thickness)

c 380.00 partitions. 229.95 Smt

(D) Columns, pillars, posts & struts.

d 10.00 (1) Square, rectangular, polygonal in plan 297.68 Smt

e 5.00 (2) Circular or curved in plan. 422.10 Smt

(H) (1) Sides and soffits of beam, haunchings

f 10.00 cantilevers, girders, bressumers, Coping and lintels 192.15 Smt

not exceeding 1 M in depth.

(2) Sides and soffits of beam, haunchings

g 5.00 cantilevers, girders, bressumers and lintels 259.88 Smt

exceeding 1 M in depth.

(L) chullah hoops, weather sheds, chhajas, carbels

h 5.00 etc including edges. 155.78 Smt

(M) Staircase with-sloping or stepped soffits incl.

i 1.00 risers & strings excluding landing. 242.55 Smt

Providing T.M.T Fe 500D bar reinforcement for

R.C.C. work including bending, binding and placing

13 in position complete up to any floor level..

a 10980.00 All Floor Level 75.46 Kg.

Providing and laying polished Kota stone slab

(Polished / River Finish, Green colour ) flooring

over 20 mm. (average) thick base of cement

14 5.00 mortar 1:6 (1 cement : 6 coarse sand) or lime 982.83 Sq.M.

mortar 1:1.5 laid over and joined with grey cement

slurry including rubbing and polishing complete.25

Providing and laying polished Kota stone slab

mm. thick in Platform ,Riser of Stair , Skirting,

Tread , dado and pillars laid on 10 mm. thick

15 5.00 cement mortar 1:3 (1 cement : 3 coarse sand) 1176.03 Sq.M.

jointed with grey cement slurry including rubbing

and polishing and MAking groove where it is

Required etc. compl

Providing and layingWhite / Colour glazed tiles of

size 600 mmx300mm x 8 mm / 300 mmx 450mm x

16 290.00 8 mm in skirting, risers of steps, Floor and dedo on 1426.95 Sq. M.

10 mm. thick cement plaster 1:3 (1 cement :

coarse sand) and jointed with white cement slurry.

Providing and laying marble stone slab flooring

over 20 mm. (Average) base of cement mortar 1:6

(1 cement: 6 coarse sand) or L.M. 1:1.5 laid and

17 2.00 jointed with grey cement slurry including rubbing 2194.63 Sq. M.

and polishing complete: (A) Marble slab 25 mm.

Providing and laying Vitrified tiles 8 to 10 mm thick

, 24'' x 24'' in flooring treads of steps and landing

18 5.00 laid on a bed of 12mm thick cement mortar 1:3 (1- 1062.50 Sq. M.

cement : 3-coarse sand) finishing with flush

pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm thick

, 24'' x 24'' in skrting risers of steps and dedo on

19 5.00 10mm thick cement plaster 1:3 (1cement : 3- 1130.15 Sq. M.

coarse sand) and jointed with white cement slurry

Providing and laying Ceramics tiles 6 to 8 mm

thick in flooring, treads of steps, landing and dedo

20 2.00 on 12 mm. thick cement plaster 1:3 (1 cement : 3 960.47 Sq. M.

coarse sand) and jointed with white cement slurry.

Providing & Laying 18 mm thick Mirror polish

granite For flooring , counter , stair -riser , tread

skirting , dedo , Jambs etc. machine cut or

21 10.00 chiselled on bed of cement mortar 1:1 pointing with 2385.71 Sq. M.

neat cement slurry incl. moulding, Making grooves

where it is required etc. comp. as per instruction of

engineer in charge.

Provdg. 20 mm. thick Finish / Mala cement plaster

in single coat on fair side of brick / concrete walls

22a for interior plastering upto any Floor level and

finished even and smooth in C.M.1:4.

i 188.00 All Floor Level 190.58 Sq.M.

Provdg. 20 mm. thick Finish / Mala cement plaster

in single coat plastering on ceilings, Beam side

and sofits of stairs upto any Floor level and

finished even and smooth in C.M.1:4.

i 170.00 All Floor Level 215.15 Sq.M.

Providing & fixing 23 cm wide chicken mesh jali

with nails & then application of 15 mm plaster on

R.C.C. & masonary joints as per dir. of engg. In

Providing and mixing water proofing materials in Per

cement mortar in proportion recommended by the Bag of

d 20.00 manufacturer. etc. comp. as per instruction of 48.77 50 Kg

engineer in charge. of

Providing 20 mm th. Double coat Sand face / Mala

Cement Plaster on Walls upto any Height Above

Ground level consisting of 12 mm th. Backing coat

of C.M. 1:3 ( 1 cement : 3 Ssand ) & 8 mm th.

Finishing coat of C.M. 1:1 ( 1 cement : 1 sand ) ets.

White / Color washing with lime on undecorated

wall surfaces (two coats) to give an even shade

24a 100.00 including thoroughly brooming the surface to 12.29 Sq.M.

remove all dirt, dust mortar drops and other foreign

24b 10.00 Finishing walls with Acrylic Smooth exterior paint of 174.97 Sq.M.

required shade :New work (Two or more coat

applied @ 1.67 ltr/10 sqm over and including

priming coat of exterior primer applied @

Wall Painting (two coats) with plastic emulsion / Oil

paint of approved brand and manufacture and of

shade required on undecorated wall surfaces to

give an even shade, over and including a priming

25a 10.00 coat with alkali resistance primer of approved 78.44 Sq.M.

brand and manufacture after thoroughly brushing

the surface free from mortar droppings, and other

foreign matter and also including preparing the

surface even and sand -papered smooth

Extra over above item for every subsequent coat of

b 10.00 of wall painting with plastic emulsion / Oil paint of 33.39 Sq.mt.

approved brand.

Applying two coats of Birla (white cement based)

or Asian (acrylic lapy-putty) or equivalent & two

coats of primer of approved brand and

c 10.00 manufacture on new wall surface to give an even 40.19 Sq.M.

shade including thoroughly brushing the surface

free from mortar dropping and other foreign matter

and sand papered smooth.

Providing & Laying & Jointing glazed stoneware

pipes incl. excavation up to 2.0 mt.,refilling,

trasporting the pipe to work site, unloading,

lowering in trenches, laying and jointing the pipes

in c.m. 1:1 incl. all jointing materials such as

cement, sand, hemp, bitumen as dire. testing the

pipe line to a head of 1.5 mt. and hydraulic test as

dire incl. watering trenches, spreading , and carting

away of surplus earth within 100 mt.lead as dire.

a 10.00 23 cm dia. 344.64 Rmt

Providing & Laying & Jointing glazed stoneware

pipes incl. excavation up to 2.0 mt.,refilling,

trasporting the pipe to work site, unloading,

lowering in trenches, laying and jointing the pipes

in c.m. 1:1 incl. all jointing materials such as

cement, sand, hemp, bitumen as dire. testing the

pipe line to a head of 1.5 mt. and hydraulic test as

dire incl. watering trenches, spreading , and carting

away of surplus earth within 100 mt.lead as dire.

b 5.00 15 cm dia 211.05 Rmt

c 5.00 10 cm dia. 288.23 Rmt

Constructing brick masonry chamber for under

ground C.I. Inspection chamber and bends with

bricks having croshing strength not less than

Kg. Cm2 in C.M. 1:5 C.I. cover with frame

(Lightduty) 455mm x 610 mm intenal dimensions

total weight of cover with frame to be not less than

38 Kg. (Wt. of cover 23Kg.) and Wt. of frame

15Kg.) (R.C.C.top slab with 1:2:4 mix (1-cement:2-

coarse sand:4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15 mm

thick with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed

concrete etc. complete.(i) Inside dimensions

mm x 610 mm and up to 850 mm deep

Constructing Manhole with R.C.C. top slab in

1:2:4mix (1-cement: 2-coarse sand:4-graded

stone aggregate 20 mm nominal size) foundation

concrete 1:3:6 mix (1-cement:3-coarse sand:6-

Brick bats 40+50mm size) inside plastering 15mm

thick with Cement Mortar 1:5 (1-Cement:5-coarse

sand) finished with a floating coat of neat cement

and making channels in cement concrete 1:2:4 mix

(1-Cement:2 -Coarse sand:4-stone aggregate

28 1.00 mm nominal size) finished smooth complete 19139.07 No.

including curing and festing (i) Inside size 900mm x

1200mm and up to 1.5M. deep including C.I. cover

with frame size 560 mm diameter total weight of

cover and frame to be not less than 128kgs. (Wt. of

cover 64Kg. and Wt. of frame 64Kg.) (A) With

mm thick walls of brick masonry using brick having

crushing strength not less than 35Kg./Sq.cm. in

Cement Mortar 1:5 (1-Cement: 5-Coarse sand)

(2)B type depth up to 1.50 Metre

Extra rate over item of excavation of earth for

excavation of asphalt pavement/RCC of thickness

up to 0.20 meter including demolishing the asphalt

carpet, metal, soiling / cutting Reinforcement

etc.comp. with stacking the material as directed.-

up to 0.20 meter thickness

Provdg. And fixing Concealed / Open to wall,

ceiling & floor in true line and level UPVC pipe

Schedule- 40 of make as approved by engg.

incharge. pipe shall be fix on wall with the help of

30 clamp at every twi meter center to center of shall

be concealed as directed in cluding neccesarry

fitting etc. in cluding testing of pipe and jointd and

fixing the same with adhesive solvent , including

cost of all materials of following nominal bore

iii 15.00 32 mm 117.97 Rmt

Provdg. And fixing to wall ,ceiling and floor

kg. F/Sq.Cm2 working pressure polythelene pipes

of the following outside diameter, low, density,

31 complete with special flange compression type

fittings, wall clips etc. making good wall ceiling and

b 5.00 (A) 75mm dia 274.68 Rmt

Providing and fixing ball valve (brass) of approved

32 quality, High or low pressure, with plastic floats

ii 1.00 20 mm dia 1099.94 No.

iii 2.00 25 mm dia 1552.93 No.

iv 1.00 40 mm dia 3312.60 No.

Providing and fixing Full Way valve (HEX) with

33 wheel of approved quality :

i 1.00 15 mm Full Way valve (HEX) 1461.17 No.

ii 1.00 20 mm Full Way valve (HEX) 1924.61 No.

iii 1.00 25 mm Full Way valve (HEX) 2535.55 No.

iv 1.00 32 mm Full Way valve (HEX) 3377.64 No.

v 1.00 40 mm Full Way valve (HEX) 4661.10 No.

vi 2.00 50 mm Full Way valve (HEX) 6675.14 No.

Providing and laying integral cement based water

proofing treatment including preparation of surface

34 5.00 as required for treatment of roofs, balconies, 1150.48 Sq.M.

terraces etc consisting of following operations:

(a) Applying a slurry coat of neat cement using

2.75 kg/sqm of cement admixed with water

proofing compound conforming to IS. 2645 and

approved by Engineer-in-charge over the RCC

slab including adjoining walls upto 300 mm height

including cleaning the surface before treatment.

(b) Laying brick bats with mortar using broken

bricks/brick bats 25 mm to 115 mm size with 50%

of cement mortar 1:5 (1 cement : 5 coarse sand)

admixed with water proofing compound conforming

to IS : 2645 and approved by Engineer-in-charge

over 20 mm thick layer of cement mortar of mix 1:5

(1 cement :5 coarse sand ) admixed with water

proofing compound conforming to IS : 2645 and

approved by Engineer-in-charge to required slope

and treating similarly the adjoining walls upto

mm height including rounding of junctions of walls

(c) After two days of proper curing applying a

second coat of cement slurry using 2.75 kg/ sqm of

cement admixed with water proofing compound

conforming to IS : 2645 and approved by

Engineerin- charge.

(d) Finishing the surface with 20 mm thick jointless

cement mortar of mix 1:4 (1 cement :4 coarse

sand) admixed with water proofing compound

conforming to IS : 2645 and approved by

Engineerin- charge

(e) The whole terrace so finished shall be flooded

with water for a minimum period of two weeks for

curing and for final test.“All above operations to be

done in order and as directed and specified by the

Engineer-in-Charge :and shall be guaranteed for

minimum period of 10 years after handing over the

completed building by the main contractor to be

finished as directed. Stamp paper guarantee

years to be furnished before receiving any

payment from the client.

With average thickness of 120 mm and minimum

thickness at khurra as 65 mm.

Providing and laying broken chine mosaic flooring

for terrace using 12 mm to 20 mm broken pieces of

glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar

creme out upto surface using white cement

including rounding off junctions and extending

them upto 15 cm along the wall,clearing with water

and oxalic acid etc. as directed.

Providing and applying fibre reinforced

elastomeric liquid water proofing membrane with

resilient acrylic polymers having Sun Reflectivity

Index (SRI) of 105 on top of concrete roof in three

coats @10.76 litre/ 10 sqm. One coat of self-

priming of elastomeric waterproofing liquid (dilution

with water in the ratio of 3:1) and two coats of

undiluted elastomeric waterproofing liquid (dry film

thickness of complete application/system not less

than 500 microns). The operation shall be carried

out after scrapping and properly cleaning the

surface to remove loose particles with wire

brushes, complete in all respect as per the

direction of Engineer-in-Charge.

Filling in Sunken Portion with good Quality Aerated

light weight concrete block having crushing

strength not less than 35 kg/sqcm and where

37 5.00 directed by the Architect / Engineer-in-charge, in 4559.61 Cmt

sunk in layer. including watering, ramming where it

is required etc. complete, as directed by the

Architect / Engineer-in-charge .

Providing and laying cement concrete flooring (

I.P.S.) 1:2:4 (1-cement : 2-coarse sand : 4-graded

38 5.00 stone aggregate 20mm nominal size) laid in one 348.08 Sq.M.

layer and finished with a floating coat of neat

cement. (B) 50mm thick.

Providing and fixing M.S. grills/ Gate of required

pattern to wooden/ Granite frames of windows etc.

with M.S. flats at required spacings and frame

39 100.00 alround, square or round bars with round headed 100.17 Kg.

bolts and nuts or by screws all complete as per the

structural designs and directions of Engineer in

Providing & Fixing Structural steel work (

Confirming to IS 4923-1997) riveted, bolted or

welded in builtup for all type sections, in framed

40 2000.00 work, including cutting, hoisting, fixing in position 126.68 Kg.

and applying a priming coat of approved steel

primer all complete as per the structural designs

and directions of Engineer in charge

Applying priming coat over new steel and other

metel surface after and including preparing the

surface by throughly cleaning, oil, grease, dirt and

other foreign matter and scoured with brushes fine

steel wood, scrapers and sand paper with ready

mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new

steel and other metal surface with enamel paint,

brushing, interior to give an even shade including

cleaning the surface an even shade including

cleaning the surface of all dirt, dust and other

foreign matter.

Providing throating or plaster drip, grooves and

moulding to Wall , R.C.C. chajja and slab.

Providing & Laying cement vatta 10 cm x 10 cm in

size quarter round in c.m. 1:1 ( 1 cement, 1 coarse

sand) laid in one layers finishing with a floating of

neat cement watering etc complete as dire.

Paver Block Providing and laying shot blasted Non

- interlocking, Paver blocks of specified thickness,

size, grade of concrete and colour machine made

and blasting by automatic shot blasting machine

and high density of as per approved sample of

approved make for footpath, parking areas, service

lanes,cross over and other areas as mentioned in

the drawing. Including providing and laying 50 mm

thick averave bedding layer of coarse sand below

paver block as per required grading and

specification. Laid paver block shall be

mechanically compacted. The work of the paving

blocks shall be executed in line and level by skilled

mason of flooring work only. Small size of paver

block with same specification shall be used at

residue or at end. It should be laid in such a way

that the no cutting of the paver block to be

necessary. If cutting of paver block shall be

required , than cut by machine only and laying to

be done by skilled flooring mason. The finished

surface of the paver block shall have coarse sand

Texture Finish. Pave blocks shall be compacted

and shall be re-laid if necessary. Actual laid area

shall be measured and paid without any wastage.

(A) 80 mm thick M-35 grade Grey Paver block of

size 200mm x 200mm. As per approved rate

Providing and fixing pre-cast concrete kerb stone

of gray cement based concrete block 30cm

length,30cm height and 15cm thick of M250 grade

46 50.00 concret as per approved design and including 358.06 R.mt.

excavation for fixing in proper line and level,filling

the joint with C:M 1:3 (1cement:3fine sand) etc

Manufacturing,testing ,supplying

loading,,transporting to work site,loading unloading

lowering in trenches,laying and jointing RCC NP3

47 class pipes in C:M 1:1 including all jointing

materials such as cement,sand,hemp bitumen as

directed testing the pipe line to a head of 1.5 mt

and hydraulic test as directed etc comp.

a 20.00 300 mm Diameter 616.07 Rmt

b 10.00 450 mm Diameter 806.25 Rmt

Constructing Bombay Pattern Type Catch Pit of

size 0.60 x 0.60 depth up to 1 mt including

excavation, B.B.C.C. (1:5:10), 23 cms thick brick

maso. wall in the prop. of CM (1:6) with 40 mm

thick IPS flooring in the prop M15 at bottom and

mm thick cement plaster inside the catch pit in the

proportion of CM (1:3) with out jali etc. comp. as

CatchPit Jali Fixing P/F FRC catch pit jali with

49 5.00 frame 600mm x 600mm clear opening etc. comp.. 1383.93 No

As directed by engineer in charge.

Estimate For Civil Work Total

I. No. Qty Rate Per Amount

1.0 FIRE FIGHTING SYSTEM

Design,Supply,installing,testing and

commissioning of FIREHYDRANTWORKS

Internal / External Hydrant

Supply, Installation, Testing & Commissioning of Fire

Hydrant & Sprinkler System as per the Technical

Specifications & tender Drawings .The work shall be

Completed in all respect as per the Instruction of

Engineer Incharge.The system shall be Integrated

with BMS (Refer the Technical Specifications of BMS

Specified in Electrical Tender Document).The Auto

Glow Signage applicable for the respective system

shall be scope of Vendor.The Vendor shall Prepare

and submit 06 Sets of detailed shop Drawings as per

Tender Specifications/Tender Drawings, Vendor also

shall Submit 06 Sets of As Built Drawings and

Sets of Soft Copy (in the form of CD in Editable

Format alongwith applicable Test Certificates,Data

Sheets,Operation & Maintenance Manual)

1.1.1 1 Supplying, Installation, Testing and Commissioning of 230151.00 SET

electric driven main Hydrant fire pumpsuitable for

automatic operation and consisting of following:

complete in all respect as required.

a) Back pull out ,Horizontal type, single stage,

centrifugal, end suction pump of cast iron body & bronze

impeller with stainless steel shaft, mechanical seal to

ensure a minimum pressure of 3.5 kg/sq. cm. at highest

and farthest outlet at specified flow of 137 m3/Hr (2280

lpm )2900 rpm at 70 Mtr. head conforming to IS

1520.with suitable size of footvalve confirming to IS

4038, Pressure rating PN2 , preventing entry of foreign

body to pump through suction pipe, perfectly flat seating

surfaces for good sealing.

b) Suitable HP Squirrel cage induction energy efficient

motor, TEFC, suitable for opertion on 415 volts, 3 phase

50 Hz. AC with IP 55 class protection for enclosure,

horizontal foot mounted type with Class - 'F' insulation,

conforming to IS-325.

c) M.S. fabricated Common base plate, coupling,

coupling guard, foundation bolts etc. as required.

d) Suitable cement concrete foundation duly plastered

with anti vibration pads.

The pump shall be capable of giving not less than 150%

discharge at ahead not less than 65% of the rated head.

1.1.2 1 Supply, installation, testing, & commissioning of electric 61717.00 SET

driven automatic pressurisation pump set consisting of

Vertical in line ,multistage Jockey pump complete for

delivery of 10.8 m3/hr against a total head of 70 metres

with bronze impeller complete with Gland Packing with

Complete accessories like Base Frame,Anti vibration

Pads,Coupling etc to make the system functional in all

Squirrel cage induction , 3 phase ,415 Volt, 50 Hz,

Energy Efficient Motor suitable for above pump. (As per

the Specifications of Motors specified in the Electrical

tender Document)

1.1.3 1 Supplying, Installation, Testing and Commissioning of 506181.00 SET

diesel engine driven main fire pump suitable for

automatic operation and consisting of following:

complete in all respect as required

b) Suitable HP, 1500 /1800 RPM water cooled with

radiator, diesel engine conforming to relevant BS & IS

standard complete with auto starting mechanism, 12/24

volts electric starting equipment, 180 AH lead acid

battery with battery stand, exhaust pipe extended upto

m. outside pump house duly insulated with 50 mm

thick glass wool with 1.0 mm. thick aluminium sheet

cladding, residential silencer, instruments and protection

as per specification, stop solenoid for auto stop in the

event of fault with audio indications, painted with post

office red colour etc. as required.

c) One 200 Ltr capacity day oil storage tank fabricated

from 3 mm thick M.S. plates. Tank shall be provided with

inlet, outlet, overflow, air vent, drain connections, filling

connection & level indicator. Tank shall be mounted on a

suitable steel structure (Painted with 2 coats of red oxide

paint). Tank shall be provided with two or more coats of

synthetic enamel paint outside over two coats of red

d) M.S. Fabricated Common base plate, coupling,

coupling guard, foundation bolts etc. as required.

e) Suitable cement concrete foundation duly plastered

with anti vibration pads.

a) Horizontal type, single stage, centrifugal, end suction

pump of cast iron body and bronze impeller with

stainless steel shaft, mechanical seal to ensure a

minimum pressure of 3.5 kg/sq. cm at highest and

farthest outlet at specified flow of

2280 lpm at 70 mtr. head conforming to IS

1.2 FIRE Control Panel ( RED Colour )

1 FIRE CONTROL PANEL FOR Main Hydrant pump 258883.00 No

and Jockey pump and Diesel Engine pump.

Fabrication, Supplying, Installation, Testing &

Commissioning of electrical control panel of cubical

construction, floor mounted type, fabricated out of 2mm

thick CRCA sheet, compartmentalised with hinged

lockable doors, dust and vermin proof, powder coated of

approved shade after 7 tank treatement process, cable

alley, inter-connection, having switchgears and

accessories mounting and internal wiring, earth

terminals, numbering etc. complete in all respect,

suitable for main fire pump, pressurisation pump

complete as per CPWD specification with following in

coming and Outgoings, suitable for operation on 415V,

phase, 50Hz Ac Supply with enclosure protection class

IP 42 as required :suitable for operation on 415 V,

phase, 50 HZ, AC supply with enclosure protection class

IP 42 as required.

A. Incoming Feeder:-

(i) 1 No of 125 A,25KA, 415V,FP MCCB with

Thermalmagnetic Based Releases having O/C, S/C ,E/F

protection, Digital ELR 96x96mm with CBCT, FP

Spreader Terminals 1 set= 8 Pcs, Extended Rotory

Handle for MCCB, 240V AC Shunt Trip coil for MCCB.

(ii) LED type indicating Lamp with suitable rating 2 Amp

SP MCB:- 1 Set (each set comprise of R,Y,B)

(iii) Digital type 3 phase Multi function Meter with suitable

rating of MCB & 3 Nos. of single core epoxy resin cast

type CTs of 125/5 Amps, 10 VA, CL 1.0 ratings -1 Set.

415 V, 125 Amps, FP Aluminium Busbars with Heat

shrinkable color code insulation sleeves.

OUTGOINGS:-( All outgoing feeders for pumps should

have digital Ammeter with selector switches and LED

type ON,OFF,Trip indicating Lamps )

1 sets - 80 A, 25kA TPN MCCB, Ics=100% Icu, with fully

automatic Star/Delta starter suitable for 60 HP pump

with overload protection, current sensing type single

phase preventor complete with all acceessories and

internal wiring required for automatic operation,selector

switch for local/remote, auto/manual/OFF operation.

1 no.40A,10KA MCB Ics=100%,Extended Rotry handle

with TM release having O/C & S/C protection with 10 HP

fully automatic star/ delta starter , current sensing type,

Single Phase Preventer, ON/OFF Push Button & LED

type Indicating lamps complete with all accessories and

internal wiring required for automatic operation, selector

switch, for local/remote, auto/manual operation

Diesel Engine Control.

Control for Diesel Engine comprising:

i) Auto/Manual selector switch & 3 attempt starting

device, timers and relays as required, push buttons,

start/stop in manual mode.

ii) LED type Indication lamp for High/Low Lub. Oil

pressure, High Water Temp and Engine ON indication.

iii) Battery charger suitable for 12 V/24 V DC with boost

and trickle selector switch, 0-30 V DC volt meter, 0-20

Amp DC Ammeter.

iv) All standard relays, accessories for automatic

operation of diesel engine, wiring with 1.5 sq mm PVC

insulated copper wire between various sensors and

system controller / starter, suitable size cable for battery

charging etc. as required.

System Controller

Designing, Supply, Installation, Testing and

Commissioning of system controller to control operation

of Main Electric Fire Pump, Diesel Pump, Pressurisation

Pump, Terrace Pump in sequence as per specification

consisting of relays, timers, sensors, annunciation

window for fault indication, control wiring complete as

3 NOS. 25A DP MCB " C " Curve

1.3 PRESSURE GAUGES AND PRESSURE SWITCHES

1.3.1 3 Providing, fixing, testing and commissioning of Pressure 1329.87 Set

Switch with Needle Valve.

1.3.2 4 Providing and fixing in position the industrial type 967.73 Set

pressure gauges with gun metal / brass valves

complete as required

1.4 Providing, laying, testing & commissioning of 'C' class

heavy duty MS Pipe conforming to IS 1239 i/c fittings

like elbows, tees, flanges, tapers, nuts bolts, gaskets

etc., in ground including excavation and providing

cement concrete blocks as support, anticorrosive

treatment with coaltar/asphalt tape as per IS

refilling the trench etc. of following sizes complete as

required .( For HYDRANT )

105 100MM Dia 2300.63 Mtr

1.5 Providing, laying, testing & commissioning of 'C' class

heavy duty MS pipe conforming to IS 3589/IS

including Welding, fittings like elbows, tees,

flanges,tapers, nuts bolts, gaskets etc. and fixing the

pipe on the wall/ceiling with suitable clamp/support

frame and painting with two or more coats of synthetic

enamel paint of required shade complete as required :

1.5.9 5 200mm Dia ( wall thickness 6.3mm ) 4938.01 Mtr

1.6 Supplying and fixing Single headed internal / External

hydrant valve with 1 No. 63 mm dia instantaneous FM

Gunmetal/Stainless Steel coupling and cast iron

wheel,ISI marked, conforming to IS 5290 (type A) with

blank Gunmetal/Stainless Steel cap and chain as

9 Single headed Stainless steel 5549.04 No

1.7 8 Providing, fixing, testing and commissioning of Wall 10499.50 No

mounting swing type first aid Fire Hose Reel with drum,

hanging bracket, 30 M x 25 mm dia high pressure hose

reel tubing as per IS:884 with shut nozzle and ball valve

and all required accessories.

1.8 8 Supplying, Installation, Testing and commissioning of 4726.50 No

weather proof Fire Hose cabinet size 900x

600x300mm to house fire hydrant & hose, including

all other related accessories fabricated from M.S. sheet

(16 Gauge) of fully welded construction having front door

with locking arrangement, partially glazed with 4 mm

thick glass. Cabinet shall be powder coated & painted

with post office red colour

1.9 16 Providing ISI marked RRL (IS : 636, type‐A) fire hose 4020.55 No

pipe 15 meter long and 63 mm dia with ISI marked (IS :

903) Stainless steel male and female coupling bound

and rivetted to hose pipes with copper rivets and copper

wire complete as required.

1.10 8 Providing Stainless steel ISI marked 63 mm. dia. male 1502.28 No

Instantaneous pattern short branch pipes with 20 mm

dia. Nozzle as per IS : 903, suitable for 10 Kg/sqcm

operating pressure and suitable for interconnections to

hose pipe coupling as required.

1.11 Supplying and fixing of fire brigade connection of cast

iron body with gun metal male instantaneous inlet

couplings complete with cap and chain as reqd. for

suitable dia MS pipe connection conforming to IS

1.11.1 1 2 way - 100 mm dia M.S. Pipe 6094.09 No

1.11.2 1 4 way - 150 mm dia M.S. Pipe 12631.09 No

1.12 1 Providing, fixing, testing and commissioning of 25 mm 1949.25 No

dia Air Release Valve and Ball Valve assembly on top

of each riser for Air release system.

1.13 1 Providing, fixing, testing and commissioning Pressure 4940.68 No

Relieaf Valve 25mm dia with Ball Valve.

1.14 9 Supplying and fixing orifice plate made out of 6 mm 1932.76 No

thick stainless steel (Grade 304) with orifice of required

size to be fitted between flange & landing valve of

external and internal hydrants to reduce pressure at the

outlet to the level of 3.5 kg/cm2 complete as required.

1.15 Supplying, fixing, testing and commissioning of butterfly

valve of PN 1.6 rating with bronze/gunmetal seat duly

ISI marked complete with nuts, bolts, washers, gaskets

conforming to IS 13095 of following sizes as required :

1.16 Providing, installation, testing and commissioning of

non-return valve of following sizes confirming to

IS:5312 complete with rubber gasket, GI bolts,

nuts,washers etc.as required :

1.17 Providing, installation, testing and commissioning of

stainless steel Y-strainer fabricated out of 1.6 mm thick

stainless steel, Grade 304, sheet with 3 mm dia holes

with stainless steel flange.

1.18 9 Supply, Installation, Testing and Commissioning of 737.27 No

Brass. Ball Valves with all fittings required. 25mm size

1.19 Supplying and erecting Flexible PVC insulated

multistrand multicore 1.1 kv grade ISI marked copper

wires of following size to be erected as directed.

95 f) 1.50 Sq.mm 4 core round PVC sheathed 67.00 Mtr

1.20 8 SITC of fire pump start stop push buttons in box. 954.50 No

1.21 1 SITC of 2 Zone standalone Fire Alarm control Panel, 9300.00 No

16X2 Character LCD Display, provision for zone wise

contact and sounder. Panel does not have provision to

connect Repeater Panel. Make: Ravel Approval: CE

Mark. (Including Five year free maintenance with

1.22 Providing and erecting ISI mark Medium class RIGID

PVC PIPES of following size complete to be erected

on/in wall or ceiling erected with necessary PVC fittings

& Junction boxes fixed with adhesive solution & Clamps

with following dia of pipes, in approved manner as

1.23 2 Supply, Installation, Testing and Commissioning of 1201.75 No

Single action Manual Pull Station.Shock and Vibration

Resistant, pull Down Lever Remains Down Until Reset.

Shall be Polarity Insensitive (with all mounting

accessories , complete with Junction Box for mooting on

Surface, Cable lugs at Ends, cable compression glands,

cable tags and ferruling.

1.24 2 Supply, Installation, Testing and Commissioning of 1201.75 No

Conventional Sounder cum strobe having tone settings

with range of 95dbA and field selectable 15/30/75/110

candelas.(with all mounting accessories , complete with

Junction Box for mooting on surface, cable lugs at ends,

cable compression glands, cable tags and Ferruling.)

CABLES AND TERMINATIONS

1.25 Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor

for 1.1 KV. to be laid on wall with necessary clamps or

in existing trench / pipe of following size of cables

70 (B) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core) 282.00 Mtr

1.26 Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor for

KV. to be laid on wall with necessary clamps or in

existing trench / pipe at road crossing or floor of

following size of cable.

1.26.1 20 (B) 3 core 4 Sq. mm 285.00 Mtr

1.26.2 10 (G) 3 core 6 Sq. mm 392.00 Mtr

1.27 Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor for

KV. to be laid on wall with necessary clamps or in

existing trench / pipe at road crossing or floor of

following size of cable.

1.28 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

1.28.2 4 (C) 2 to 4 core 10 Sq. mm 38.00 No

1.28.3 2 (D) 2 to 4 core 16 Sq. mm 47.00 No

1.29 Providing and, fixing heavy duty flange type brass

double compression type cable gland with rubber

ring for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of

1.30 Solder less crimping type Aluminium lugs conforming

to IS suitable for cable of following size evenly crimped

with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an

approved manner.

1.31 Solder less crimping type Copper lugs conforming to IS

suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

1.32 Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking capacity

ICU of 35 KA. at 415 V. having normal current rating

125A. with Fixed thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing

16 G.M.S. housing.

1 ICS=100% of ICU only 8773.60 No

1.33 Providing and erecting busbar chamber confirming to IS-

375 fabricated from 16 G.M.S. sheet, dust & vermin

proof having hinged door with rubber gasket and

necessary busbar supports with COPPER busbar having

current density not more than 1.6 Amp. / sq.mm (Rated

current / cross section area) duly wrapped with colour

insulation tape for phase sequence, three phase &

neutral each suitable for following current capacity with

necessary painting mounted on wall or pedestal frame of

required size with necessary connections.

1 (B) Suitable for 200 Amp. capacity 5675.00 No

1.34 Providing and fixing approved make Perforated C type

cable tray. Made from sheet steel. The cable tray

should be single or double bended as per required and

as per IS 2062/1079 and shall be coated with hot dip

galvanizing as per IS 2629/4759. with max 17.5%

perforation with coupler plate / Fish plate and GI

hardware like nut - bolt and washers etc. erection with

necessary support( included) as per Specification and

as per instruction of engineer in charge..

1.35 1 Supply, installation,testing and commissioning of 12230.00 E.a.

Chemical Earthing with UL Certified 17.2mm Dia. X

3000mm Long 254 Micron-Copper bonded M.S. Rod

manufactured as per IEC 62561-2 with 25Kg Bentonite

powder plus " U " bolt rod clamp complete with

Lockable high performence chamber suitable & tested

for 5000T capacity with SS Hardware.or equivalent

1.36 SEWAGE PUMPS

2 Supplying, Installation, Testing and commissioning 19676.50 No

Sewage water submersible pumping sets of CI casing

& impeller, SS shaft, including with inbuilt water level

sensors for operating the pumps automatically and all

accessories suitable for operation on 220 V-240 V,

single phase, 50 Hz. AC supply etc. as reqd.

> 10 mm solid handling capacity,Minimum Capacity

- 50 LPM,Minimum Head > 13.5 Mtr

1.37 1 Charges of Preparing Design , Drawings ,Testing of Fire 84745.76 job

Fighting System with necessary Approval from Local

Fire authority.( Including Pre-NOC and NOC from Fire

1.38 Providing, fixing, testing and commissioning of below

Auto Glow Signages.

1.38.2 2 Fire Equipment: 4" X 12" 514.97 No

1.38.3 2 In case of Fire, do not use lift, use staircase: 8" x 8" 650.00 No

1.38.4 2 Fire Lift 4"X12" 514.97 No

1.38.5 2 Fire Extinguishers 8"x 4" 480.00 No

1.38.6 2 Floor Sign": 4" X 12" 514.97 No

1.38.7 2 Fire Hydrant 4” X 12” 514.97 No

1.38.8 2 Fire Hose Reel.4” X 12” 514.97 No

1.38.9 2 DCP Extinguisher 8"x 4" 480.00 No

1.38.10 2 CO2 Extinguisher 8"X 4" 480.00 No

1.39 Providing, fixing, testing & commissioning of 15mm dia

quartzoid bulb type sprinklers of rating with required

1.39.1 45 Pendent Sprinkler 57°C standard response (K-80) UL 362.25 No

1.39.2 5 Pendent Sprinkler 68°C standard response (K-80) UL 471.50 No

1.40 Supplying, installation, testing & commissioning of

sprinkler flexible pipe (UL Listed) of stainless steel

complete with 15 NPT on reducer thread with maximum

working pressure of 175 PSI test pressure of 875 PSI

(Burst) with branch line (Inlet) 25mm NPT male thread to

sprinkler head (Outlet) 15mm NPT female thread with

reducer, nipple, 2 side brackets,center bracket, stockbar

of following sizes complete as required etc of following

sizes as required:

SUB-TOTAL OF FIRE HYDRANT System

2.0 FIRE EXTINGUISHERS

2.1 2 FIRE EXTINGUISHER Supplying, Installation, Testing 2724.25 No

and commissioning of Dry Chemical Powder (DCP) 6 Kg

Fire Extinguisher Mono Ammonium Phosphate Powder

40, Stored Pressure Type, Pressure Gauge, Controllable

discharge mechanism Class A, Rating 3A & Class B

rating 21B as per IS 15683 ISI MARK (ABC Dry

Chemical Powder - MAP 40%)fitted with required

accessories including wall suspension brackets.

2.2 2 Supplying, fixing, testing and commissioning of CO2 6526.00 No

type Fire Extinguisher of capacity 4.5kg filled with Co2

Gas as per IS 15222 with controll discharge

mechanismfitted with Hose & Horn applicable on Class

B fire rating 21B confirms to IS 15683, bearing ISI

mark. Co2 Cylinder as per IS

2.3 1 Providing & fixing of ISI marked water CO2 type Portable 3450.00 No

fire extingusher,9 LTR capacity, Hydraulic test pressure

35Kgf/ cm2, Discharge range 2 Mtr,Average discharge

time: Min. 13Sec,Fire Rating 3A,Grade: IS:15683.

SUB TOTAL of FIRE EXTINGUISER

FIRE DETCTION & FIRE ALARM SYSTEM

3.1 1 SITC of Microprocessor based Net-workable 118852.50 No

Analogue Addressable Fire Alarm Control Panel. The

Panel shall be compliant with EN54-2, EN54-4 and

approved by LPCB. The Fire Alarm Control Panel

shall have inbuilt one loop. The Panel must have large

graphic display. The Panel must also have the capability

to take Addressable Intelligent Wired and Wireless

Devices on same loop. Each loop shall have a capacity

of 127 analogue Addressable devices and 127 Base

sounders/Base Sounder Beacons. The Panel shall have

240 V AC power supply along with automatic Battery

Charger. Non-Networkable

Approved by LPCB (Including Five year free

maintenance with guarantee)

3.2 35 SITC of Analogue Addressable Multi- Sensor which is 3597.20 No

fully compatible with Analogue Addressable

Protocol,having removable high performance chamber

with Twin fire LED's allow 360 degree viewing, User

selectable sensitivity modes 1% to 4.5% obs/m,

Incorporate Optical and dual Heat elements, lock

mechanism (sensor to base), Electronically addressed,

Pulsing/non-pulsing controlled from panel. Approved by

LPCB & VdS. (Including Five year free maintenance with

3.3 1 SITC of Analogue Addressable Multi- Heat Sensor 3498.30 No

which is fully compatible with Analogue Addressable

Protocol,having removable high performance chamber

with Twin fire LED's allow 360 degree viewing, User

selectable sensitivity modes 0 to 88 degree Celsius,

Incorporates Fixed Temperature and Rate Of Rise Heat

elements, lock mechanism (sensor to base),

Electronically addressed, Pulsing/non-pulsing controlled

from panel. Approved by LPCB (EN54: Part 5)

(Including Five year free maintenance with guarantee)

3.4 36 SITC of sensor common mounting base, includes 354.20 No

stainless steel contacts, slim profile - only 8mm, quick

connection via square cable clamps, facility for remote

indicator, Approved by LPCB (Including Five year free

maintenance with guarantee)

3.5 3 Supply,Instllation,Testing and Commissioning of Fault 2477.10 No

isolator Module capable of monitoring shorted loop

circuit and automatically restore communications when

shorted conditions are corrected (Including Five year

free maintenance with guarantee)

3.6 2 Supplying, installation, testing & commissioning of 193.20 No

response indicator on surface/recessed MS Box having

two LED, metallic cover complete with all connections

etc as required.

3.7 2 SITC of Manual Call Point approved to EN54-11:2001, 4191.75 No

Approved by LPCB Easy to install, push-fit wiring

terminals (Including Five year free maintenance with

3.8 2 SITC of Analogue addressable loop powered Base 7442.80 No

Sounder, variable sound output 50 ~ 98 dB(A) (±2

dB(A)) output at 1 metre, 51 user-selectable tones (all

tones EN54-3 compatible), Auto shutdown feature

prevents noise-pollution, Approved by LPCB & VdS

(Including Five year free maintenance with guarantee)

3.9 350 Supplying & laying of 2x 1.5 sqmm fire alarm armoured 135.70 Mtr

cable, 600/1000V rated with annealed copper

conductor having XLPE insulation, steel wire

armouring & FRLS outer sheath complete as required.

SUB -TOTAL OF FIRE DETECTION& ALARM

Electrical Work Estimate

4.0 INTERNAL WIRING

4.1 Point wiring for Light / Bell with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade ZHFR/HRFR PVC insulated multi strand copper

wires up to 10 mtr length , in below type of pipe erected

with 6A Modular type switch / bell push & accessories

and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as

4 (f) with medium class Rigid PVC pipe and accessories 505.05 Pt

erected concealed in wall/ceiling complete

4.2 Point wiring for FAN with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade

ZHFR/HRFR PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected with

6A Modular type switch and hum free EME four or more

step type electronic fan regulator with separately

mounted and accessories with earth continuity of

following type erected on PVC / Metallic/Wooden box,

single mounting base frame covered with

textured/metallic/white front plate modules erected on /

in wall / ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed.

2 (f) with medium class Rigid PVC pipe and accessories 701.40 Pt

erected concealed in wall/ceiling complete

4.3 Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade

ZHFR/HRFR PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected

complete with Modular type switch & 5 pin Plug erected

on PVC / Metallic/Wooden box covered with appropriate

front plate modules erected on / in wall / ceiling as per

pipe erected with following type of accessories.

4.3.1 2 [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. 530.25 Pt

Wire from nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

4.3.2 2 [II] For 16A Plug and 16 amp switch with 2-2.5 774.90 Pt

sq.mm Cu. Wire from mcb db board.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

4.4 Providing and erecting ISI mark Medium class RIGID

PVC PIPES of following size complete to be erected

on/in wall or ceiling erected with necessary PVC fittings

& Junction boxes fixed with adhesive solution & Clamps

with following dia of pipes, in approved manner as

4.5 providing and erecting Mains with ISI marked electrolyte

stranded copper conductor, Non PVC Zero Halogen free

fire retardant insulated copper conductor, insulated wire

(HRFR) conforms to IS-694, erected in existing pipe with

1.5sq. mm copper conductor of same specifications for

earth continuity of following size.

In Existing medium class Rigid PVC pipe and

4.5.1 25 (a) 2 wire 1.5 sq. mm 51 Mtr

4.5.2 25 (b) 2 wire 2.5 sq. mm 71 Mtr

Follow IS code :3043 is the guideline for the

5.1 20 Providing and erecting required size HOT deep 77 KG

Galvanised iron strip for earthing of H.T. , OCB/ ACB/

Transformer LT panel board, Motors etc. using proper

5.2 10 Providing and erecting HOT deep Galvanised iron strip 77 KG

wire 8 to 16 SWG.

5.3 Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by highly

conductive compound with high charge dissipation

suitable for following type of applications with chamber

and heavy duty cover.(approved make OEM has to

submit test certificate) & having back filling compound of

(B) Inner chemical (CCM Compound)- Resistivity:-

W/ meter testing as per IEC 62561-2017, Voltage drop:-

< 1 volt at no load & dry form, Sulphar content:- <2%(C)

Back fill Compound :- Earthing compound should be

capable to retain moisture for long time Necessary test

report must be submitted.

5.4.2 1 (c) For Electrical Installation covering Transformer 8551 E.a.

Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like Automation, SCADA) i.e

independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

5.5 80 Making trench in soft soil of suitable width of 90 cm deep 55 Mtr

for laying cable or locating the fault all over the run and

back filling the same and making the surface as normal

5.6 80 Covering of cable with second class bricks or cement 139 Mtr

tiles laid cover the cable crosswise & also on both sides

with covering of 7. 5 Cm. layer of sand above & below

cable (16 bricks per meter)

5.7 Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming

to IS 14930 II )with necessary connecting accessories

of same material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable

5.7.1 80 (A)50 mm outer dia 62 Mtr

Light Fixtures & Fans

Supply , Installation, testing and commissioning of pre-

wired, LED fitting/post top luminaries etc of all types,

complete with all accessories and tube etc. directly on

ceiling/ wall, including connection with 1.5 sq. mm FRLS

PVC insulated, flexible, copper conductor, single core

cable with flexible conduits and coupler and earthing etc.

as required. Note:- The LED Light fixtures should

comply all international standards third party ( LM

for complete fixture, LM 80 for individual LED ). The

Manufacturer / Channel Partner of the Manufacturer

has to submit 4- Years unconditional free

Replacement Guarantee for complete fixture.

6.1 Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.95,

THD <15%,CCT 3000 K to 6500K, Luminaire efficacy>

85 lumens/watt , LED driver efficiency > 85 %( fitting

required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

6.1.1 ( A ) Tube Light with integral / non integral driver

4 (v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet 530 No

6.2 2 Providing & erecting Approved make Power Saving 50 1929 No

Watt Ceiling Fan with double ball bearing ISI mark

with Condenser 230 volt A.C. 50 Hz 1200 mm sweep

complete having 3blades with aluminium blades with

canopy & 30 cm. down rod erected with earthing.(Make

shall be approved by Engineer in charge))

6.3 2 Supplying & erecting fan hook box of 10 mm M.S. 107 No

round bar bounded to the RCC bars up to 50mm length

each side and pierced through a 16 Gauge M.S. box /

Heavy Duty PVC box complete erected concealed in

Ceiling with necessary finishing.

6.4 2 Providing 2.5mm.thick laminated acrylic sheet to cover 18 No

the fan hook or Fan box.

6.5 2 Supplying and erecting 19 / 20 mm. nominal bore 107 Mtr

Medium Class M.S. Pipe down rod erected duly

painted for fan complete with proper insulation

without leakage and earthing.

SUB -TOTAL OF Electrical Work

Signature of Bidder

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTMENT- EAST ZONE

Name of Work: SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF NEW FIRE FIGHTING SYSTEM

IN WARD OFFICE BUILDING AT BHAIPURA WARD, EAST ZONE, AHMEDABAD.

FINANCIAL BID (Online Only)

Sr.No. Description Amount

1 Amount For Civil Work Rs.

2 Amount For Fire Fighting System and Electrical Work Rs.

Total Rs.66,58,759.88

I/We am/are willing to carry out work at ______% above / below (should be written in figures and words)

the estimated cost mentioned above.

Estimated cost put to tender : Rs.66,58,759.88 Estimated cost put to tender : Rs.66,58,759.88

Add_____% above : Rs ___________ Deduct_____% below : Rs __________

In words : Rupees _______________________ In words : Rupees_____________________

Signature of contractor Additional City Engineer ( East Zone )

Seal Ahmedabad Municipal Corporation