Establishment and Interior work of Rifle Shooting Club with 1 Year Defect Liability Period in Bareilly underBSCL.

Amount

CIVIL WORK

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mm

First class brickwork in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work

First class brickwork in 1:3 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work

As in item no 303&304 above but in superstructure, including necessary cutting and moulding of bricks as required and including honey comb brick work, thickness of wall not to be less 1 brick thick. Add extra labour to above items

As in item no. 309 above but for wall of one brick thick. Add for extra item over item 309

As in item no. 309 above but for wall of half brick (4½") thick. Add for extra item over item 309

12 mm cement plaster with 1:4 cement & coarse sand of 1.25 FM in single coat of single or half brick wall for interior plastering upto floor two level.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1cement: 4 coarse sand)

Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works above plinth and upto floor V level Concrete of M15 grade with minimum cement content of 240 kg /cum

Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform

Steel rainforcement for R.C.C work including straightening cutting, bending placing in position and binding all complete upto plinth level. Thermo-mechanically treated bars of grade Fe-500D or more.

INTERIOR WORK

Providing & Fixing of at all height false ceiling including providing and fixing of frame made of special section power pressed from m.s. sheet and galvonised in accordance with zinc coating of grade 350 as per IS 277 and consisting of angle cleat 25x1.6mm with flanges of 27mm and 37mm at 1200mm c/c one flanged fix to the ceiling with dash fastener 12.5mm dia and and 40mm long with 6mm dia bolt to the angle hangers of 25x25x0.55 mm of required lengthened other end of angle hanger being fixed with nut and bolts to GI channel 45x15x0.90mm running at the rate of 1200 mm c/c to with the ceiling section 0.5mm thick button wedges of 80mm with tappered flenges of 26 mm each having clips of 10.5mm.at 450mmc/ c shall be fixed in direction perpendicular to GI channels with connecting clips made out of 2.64MM diax230mm long GI wire at every junction including fixing the gypsum board with ceiling section and perimetre channels 0.50 mm thick 27mm high having flenges of 20mm and 30mm long ,perimeter of ceiling fixed to wall /partition with help of rawl plugs at 450mm c/c with 25 mm long drive all screws @230mm interval including jointing and fixing to a flush finish of tappered end sq edge of board with recommended filler jointing and tapper finisher and two coat of primer suitable for board as per manufacturers specification and also including the cost of making of openning for light fittings grills diffusers cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of engineer incharge but excluding the cost of painting. 12.50mm thick tapered edge gypsum board.

Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with : GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation.

Providing & Fixing of Armstrong Suspended Ceiling System with Armstrong H4988 BP4988S DUNE Bev. Teg. 600x600x15mm (Microlook) EDGE TILES WITH ARMSTRONG Silhouette Exposed GRID. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ≥85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm ,and 600x1200x15mm suitable for Green Building application, with Recycled content of 66% GW.The tile shall be laid on Armstrong Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 38mm. Silhouette, Main Runners & Cross Tees to have mitred ends & “birdsmouth” notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 90 grams per M2 and a load carrying capacity of 10 Kgs/M2.The Tile & Grid system used together, all complete as per drawing, specification and direction as approved by the Architect/ Engineer -in-Charge

Providing and fixing in true horizontal level Open cell lay-in ceiling tiles with border panels forming flush-tegular edge of size 600mmx600mmx38mm having Fire Performance CLASS 0/Class 1 (BS 476). The tile of ‘Global white’ color with cell size 150mm X 150mm /100mmx100mm shall be laid on white painted Suprafine XL15mm profile grid system comprising Main runners (3000mm), 1200mm and 600mm cross tees with 15mm white flanges and 38mm web height. The grid should be of 15mm wide T - section flanges color white having rotary stitching on all T sections i.e. the Main Runner with C3 coupling, 1200 mm & 600 mm Cross Tees with Hardened XL2 Clip having a web height of 38 mm and a load carrying capacity of 14 Kgs/M. The T Sections have a Galvanizing of 90 grams per M2 with pull out strength of 100 Kgs. Suspension system. INSTALLATION: To comprise main runner spaced at 1200mm centers securely fixed to the structural soffit by approved hangers at 1200mm maximum centre & not more than 150mm from spliced joints. The last hanger at the end of each main runner should not be greater than 600mm from the adjacent wall. 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long cross tees centrally between the 1200 mm cross tees. Perimeter trim to be wall angles, secured to walls at 450 mm maximum centers.

Providing & fixing Armstrong Vertical Linear Baffle Ceiling made out of GI Extrusion in GI alloy grade. The baffle blade shall be in size of 100x 25 x 3600mm. The baffle blade shall be suspended using Slotted U-profile at on-center spacing in multiples of 25mm. longer lengths of Baffle to be connected by Baffle Joiner and the ends to be fixed with End caps. Installation of U-Grid: The U profile to be suspended at every 1200mm on-centre using 6mm threaded rod from the structural soffit using U-profile hanger. U-profile splice to be used to join more than one U profiles of length 3.75M. 1st U-Grid Channel must be no more than 400mm from the perimeter. as per the approved design all complete as per drawing, specification and direction of Architect/ Engineer -in-Charge.

Providing & fixing of 100% Natural Material- Magnesite (Hygroscopic & biologically sound binding agent) bonded woodwool Ceiling "Heradesign - Superfine series planks of 600Mm*600Mm *15Mm thickness made out of wood wool fibre of width 1Mm Fiber thickness mixed with Natural water & Magnesite (No-Cement) with open & smooth surface texture. A Completly harmless Envirenment& Human Friendly & also a disposable or recyclable Material.it has long lifespan & suitable for Indoor conditions with relative air humidity of upto 90%. Magnesite protects the wood cells against ageing & fungal attack. To achiveupto NRC=0.90 it should be a clear gap of Min. 300Mm from Ceiling along with the backing of Mineral wool of 50kg/m3 in 40Mm Thickness-Module 600x600x15Mm-SK04 Edge. It will be provided with UV-C LED based air purifying solution UV-C Luftreiniger with customised hanging arrangement suited for existing AC grills, basically used for disinfection/purification. Fixing & Substructure - Panels shall be laid on T24 grid system of 24mm wide grid system made out of hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24*38 mm at every 600mm,c/c maximum and rotary stitched cross tee of size 24*35 mm at every 600 mm.c/c ,and wall angle of size 19*19 mm, fixed to the periphery of the wall. The above grid is suspended at every 900mm c/c in one direction and at every 600Mm in parallel to main runner using 4.0mm, thick pre-straightened GI ROD,6mm ANCHOR PHASNER at every 900Mm interval at the Main Tee laying KCS Recessed Board edge ceiling tiles manufactured by M/s Knauf Ceiling Solutions India Pvt Ltd. Approved Make – Knauf/ Nittobo/ Shera

Providing and fixing of 12MM Laminate Flooring Made From High Density Fibre Board Having Density 900 Kg/M³ Or More, Core Board Based Of Dome Technology In 8mm / 12 Mm Thickness, Made From Lignocellulosic Material-Specifically “Plantation Timbers” Like Eucalyptus Manufactured With Homogeneous Core, The Flooring Shall Be Topicalized With An Anti-Bacterial Surface With Dimensional Stabilityand Laminated With Melamine Formaldehyde Impregnated European Made Décor Paper (70-120gsm) Duly Overlayed With An Anti Abrasion Layer Of Aluminium Oxide Impregnated Tissue (55,65,85gsm) In Ac3 (2000 Abrasion Cycle) / Ac4 (4000 Abrasion Cycle) / Ac5 (6000 Abrasion Cycle ). The Product Shall Have An Isomatric Locking Profile Made From A 5 Spindled Profiling Head. The Locking Profile Shall Be Wax Coated To Prevent Moisture Seepage. The Laminate Flooring Shall To Be Fixed On A Base Of 2mm Thick Layer Of Pu Foam Having A Density Of 24kg/M³. The Bare Floor Shall Be 1st Covered With Pe Sheet Having A Thickness Of 0.2mm. The Flooring Solution Shall Be Accompanied By Relevant Accessories-Skirting, Reducers, End Profiles, Stair Nose & Beading Of Matching Shades. Make-ActionTesa/Armstrong/Equivalent

Supply & fixing of first radiant/first line/Japan carpet tile tufted 1/10” loop carpet tile100% PA6 solution dyed aquation backing back to back modified bitumen, 10% recycled content included,fire resistant EN-1350-1B,,S1,pile height Ca2.9 mm, total weight ca 4300 gm/m2,pile densityca 0.114gm/cm3,thermal resistant ISO8302.0.047m2 K/W,impact noise rating ISO10140(1000Hz) tile size should be (500 cm X 500 cm) duly installed on smooth and hard surface with company recommended adhesive.

Providing & Fixing of Sports Flooring of 4MM Thickness Made of PVC & Vinyl Sponge for Increase in Bounce, as per the approved design all complete as per drawing, specification & Direction of Engineer Incharge.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing and laying of Double Charged floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 1200x600MM

Grouting the joints of flooring tiles having joints using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.

Providing & Making & Fixing of Commercial Wall Panneling made with Aluminium Section of 2"x1" @ 2'CC frame work cladded with 12MM Ply complete with painted or polishe. as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Providing & fixing of 100% Natural Material- Magnesite (Hygroscopic & biologically sound binding agent) bonded woodwool Panel "Heradesign - Superfine series planks of 600Mm*1200Mm *25Mm thickness made out of wood wool fibre of width 1Mm Fiber thickness mixed with Natural water & Magnesite (No-Cement) with open & smooth surface texture. A Completly harmless Envirenment& Human Friendly & also a disposable or recyclable Material & can last for long span in building interiors As it has long lifespan & suitable for Indoor conditions with relative air humidity of upto 90%. Magnesite protects the wood cells against ageing & fungal attack. To achiveupto NRC=1.00 it should be a clear gap of 200Mm from wall slab along with the backing of Mineral of 50kg/m3.Edge Detail : AK 01 HeradesignWoodwool - Acoustical Wall Mounting System Solutions- Ecologically Sound Material with high mechanical strength with Crash test of 90Km/H with Ball Impact Test DIN18032 & EN13964 with flying colors& A sustainable material (PEFC & FSC Certified) along with EPD Certified Acc. to EN ISO 14025 (AUB-Environmental Product declaration). It will be provided with UV-C LED based air purifying solution UV-C Luftreiniger with customised hanging arrangement suited for existing AC grills, basically used for disinfection/purification. Fixing & Substructure- Impact Resitant According to DIN-18023 or EN13964 to be Fixed on CD Sections Profile framework with Screw 9Pc/Panel & Centre to centre scre Distance Support at 300Mm & Centre distance of Cross Profile would be at 600Mm & Main Profile at 900Mm CD Profile is made out of GI( Sections Profile 60/27/0.6Mm-0.6MmThick x 60Mm Width x 0.27Mm height). The Main Profile is in the legth of 3000Mm & to form a section of 600mm x 1200mm. Heradesign Superfine panels to be fixed on the wall with a minimum of 200Mm void or gap with Galvanized screws of length 50Mm &Dia 4.5Mm with a backing of Mineral Wool of density 50kg/m3 density (50mm thick). Approved Make – Knauf / Nittobo/ Shera

Providing & Making & Fixing of Commercial Wall Partition made with Aluminium Section of 2"x1" @ 2'CC frame work cladded with 9MM Ply on Both Side complete with painted or polishe. as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Providing & fixing Toughned glass Partition of 12mm Modi float glass fixed edge to edge on MS Frame Structure which shall be Painted As per desired shade/Colour as per design and drawing and polished where required along with neccesary hardware all complete as per drawing, specification and direction of engineer incharge.

Providing & Making & Fixing of Wall Panneling made with 1MM Laminate & 5.5MM MDF on Existing Surface complete with painted or polishe. as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Providing & Making & Fixing of Wall Panneling made with 4MM Veneer on Existing Surface complete with Melamine Polishe. as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Providing & Making & Fixing of Wall Panneling made with 12MM Louver on Existing Surface complete with Melamine Polishe. as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Providing & Making & Fixing of Wall Panneling made with Coloured Lacquered Glass on Existing Surface complete with Melamine Polishe. as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Providing & Fixing of Cluster Stone Brick Stamping of Size (8.46"x2.36") & 13MM (Approx) Thick having Super Hard outer shell on Vertical Surface with uncoloured Adhesive FS complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge.

Providing & Making & Fixing of Storage Cabinet made of 19mm board, having shelves & shutters & teak wood beading & finished surface of 1mm thick Laminate including all hardware like tower bolts, hinges, lock & handle as per approved drawing & direction of Engineer incharge.

Providing and supplying ‘Acoustical Wall Paneling’ with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and fire -resistant fabric with an option of colours as per the choice of the Architect/ Person in-charge of desired size providing a minimum sound absorption level of 0.70 to 0.90 NRC to be affixed to wall using Wall panel impalers and construction adhesives as per the instructions laid down by the site as per the approved design as approved by Engineer -in-Charge.

Providing & fixing of 12 mm Toughened Glass Door with all hardware as per design with edge polish m/c top & bottom pivot and bottom lock with handle all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Providing & fixing of Flush Door Laminated both side complete with all Fittings Like Hinges, Mortis lock, Door closer, Tower Bolt etc all complete as per drawing, specification and direction as approved by Engineer -in-Charge.

Providing & Fixing of Plotter Cutted Designer Film of approved shade as per drawing & specification as approved by Engineer -in-Charge.

Providing & Fixing of Plotter Cutted Designer Coloured Vinyl of approved shade as per drawing & specification as approved by Engineer -in-Charge.

Providing & Fixing of Wall Paper of approved shade as per drawing & specification as approved by Engineer -in-Charge.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work (1st quality, Royal,Silk,Asian/Berger)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red Area of slab over 0.50 sqm

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing & Making & Fixing of 5.5MM thick MDF Paneling on existing commercial paneling/Partition Having 12MM thick MDF Border complete with DUCO Paint as per the approved design all complete as per drawing, specification and direction as approved by the Architect/ Engineer -in-Charge.

ELECTRICAL WORK

Wiring point for light with 1.5 sqmm.FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq.mm. FRLSH copper earth contunity wire,modular type switch & ceiling rose/angle/batten holder on 3mm thick phenolic paminated backalite sheet etc.complete in all respects.as directed including matching colour wash.

Wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sqmm.FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq.mm. FRLSH copper earth contunity wire,modular type switch & ceiling rose/angle/batten holder on 3mm thick phenolic paminated backalite sheet etc.complete in all respects.as directed including matching colour wash.

Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.

Supply and fixing of power plug with 20A/250 V flush type modular switch and 5 Pin 20 A/250 Volt flush type universal modular socket switch on concealed M.S. box including supply of all material, labour T & P etc required for proper completion of work.

Supply and wiring of submain with two number 1.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit with 1 number 1.5 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor as earth continuity wire.

Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit with 1 number 1.5 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor as earth continuity wire.

Supply and wiring of submain with two number 4.0 sq.mm. PVC insulated 1100 V grade single core copper conductor cable in mm dia heavy duty (2mm thick) PVC conduit with 1 nos. 2.5 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect.

Supply and wiring of submain with two number 6 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core aluminium conductor cable in 25 mm dia heavy duty (2mm thick) PVC conduit with one number 4 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in conduit.

Supplying & Drawing co-axial TV cable RG-6 grade, 0.7 mm. solid copper conductor, PE insulated] shielded with fine finned copper braid and protected with PVC sheath in the existing surface/ recessed steel/PVC conduit as required. For T.V. Socket outlet

Supplying & Fixing Of Telephone Wire 2Pair 0.5Sqmm solid conductor, PE insulated shielded with fine finned copper braid and protected with PVC sheath in the existing surface/ recessed steel/PVC conduit as required.

Providing Drawing Connecting And Testing Of Enhanced Categoey 4 Pair Lan Local Area Network Cable 24 AWG Conductor Performance Specifide 5E U L and CUL Listed In Existing PVC Conduit .(CAT-6 Network Cable)

Supply fixing and concealing of 20mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of work. asdirected at site by the engineer in charge.

Supply fixing and concealing of 25mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of work. asdirected at site by the engineer in charge.

Supply fixing and concealing of 32mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of work. asdirected at site by the engineer in charge.

Supply and fixing of recess mounting round 15 TO 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. CAT-AAA

Supply and fixing of 36 Watt to 46 Watt above 3300 leumin indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect. CAT-AAA

Supplying & fixing of TV Antenna socket on Modular Plate & G.I Box including connections

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required, 1 or 2 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required, 3 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required, 6 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required, 12 Module

Blank plate for modular plate type switch boards wherever required.

Supply & Fixing of LED Profile Light all complete as per drawing and specification and direction of engineer incharge. Make-Ledadvance/Ledos/Ledlum/Philips, Equivalent

Supply & Fixing of LED Profile Light Driver all complete as per drawing and specification and direction of engineer incharge. Make-Ledadvance/Ledos/Ledlum/Philips, Equivalent

Supply and fixing of 400mm Wall Fan all complete as per drawing and specification and direction of engineer incharge. Make-Crompton/Bajaj/Havels Equivalent

Supply and Fixing of Deep Recess Mounting round 10 Watt COB LED Spot Light having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. Make-Ledadvance/Ledos/Ledlum/Philips, Equivalent

Providing & Fixing of Modular plate type white RJ 45 CAT 6 Data/Talephone outlet / information outlets ETL verified to meet or exceed TIA / EIA category 6 requirements, universal wiring label permitting to either T568A or T568B, UL listed, for computer networking complete in all respect with cover plate, grid plate, screws, MS box, etc with connections as required with 2nos RJ-45 Data outlet

Supply and fixing of 250mm Ventilating Fan all complete as per drawing and specification and direction of engineer incharge. Make-Crompton/Bajaj/Havels Equivalent

Supply and fixing of 6Amp to 32Amp SPMCB (10KA) C Curve CAT-A4 Pole Isolator CAT-A

Supply and fixing of 63Amp 4 Pole Isolator CAT-A

S & F surface/Flush mounting 12ways V TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. CAT A

Supply and Fixing of Magnetic Track including all Harwares & Power Drivers all complete as per drawing and specification and direction of engineer incharge. Make-Crompton, Havells, Bajaj or Equivalent

Supply and Fixing of 15Watt Magnetic Hanging Light Fitted on Magnetic Track (Payment of Track To Be Made Seperately) all complete as per drawing and specification and direction of engineer incharge. Make-Crompton, Havells, Bajaj or Equivalent

Supply and Fixing of 24Watt Magnetic Track Light Fitted on Magnetic Track (Payment of Track To Be Made Seperately) all complete as per drawing and specification and direction of engineer incharge. Make-Crompton, Havells, Bajaj or Equivalent

Supply and Fixing of 12Watt Magnetic Track Light Fitted on Magnetic Track (Payment of Track To Be Made Seperately) all complete as per drawing and specification and direction of engineer incharge. Make-Crompton, Havells, Bajaj or Equivalent

FURNITURE WORK

Providing & Making & Fixing of Customized Single Seater Sofa Chair Made of Leatherite Having Wooden Structure Covered with Heavy Duty Cusions all complete as per drawing and specification and direction of engineer incharge.

Providing & Making & Fixing of Customized Three Seater Sofa Chair Made of Leatherite Having Wooden Structure Covered with Heavy Duty Cusions all complete as per drawing and specification and direction of engineer incharge.

Providing & Making & Fixing of Customized Corner Tables Made of Wooden & SS Structure all complete as per drawing and specification and direction of engineer incharge.

Providing & Making & Fixing of Customized Center Tables Made of Wooden & SS Structure all complete as per drawing and specification and direction of engineer incharge.

Providing & Fixing of Café Table of Made of Solid Wood Leg & Laminated Top, Model-Woodrow Café, Make-Featherlite/ Geeken/ Equivalent

Providing & Fixing of Café Chair Made of Solid Wood Leg & Cushioned Seat, Make-Featherlite/ Geeken/ Equivalent

Providing & Fixing of 3 Seater Sofa, Aluminium Arm And leg, Powder Coated Cross Beam, Metal Insert PU Seat Back. Make-Featherlite/ Geeken/ Equivalent

Providing & Fixing of Discussion Tabel, Made of Particle board and MDF top. Make-Featherlite/ Geeken/ Equivalent

Supply & Installation of High Back Chair, Pipe Frame, PU Chrome Arm, Gas Lift, Chrome Base, Leatherite Tapestry, Model- GS 339, Make-Geeken/Equivalent as Approved By Client/E.I

Supply & Installation of Medium Back Chair, Pipe Frame, PU Chrome Arm, Gas Lift, Chrome Base, Leatherite Tapestry, Model- GS 340, Make-Geeken/Equivalent as Approved By Client/E.I

Supply & Installation of Visitor Chair, Pipe Frame, PU Chrome Arm, Chrome Plated Pipe Stand, Leatherite Tapestry, Model- GS 341, Make-Geeken/Equivalent as Approved By Client/E.I

Supply & Installation of Bar Stool, Without Arms, Powder Coated Pipe Frame, Cushion Seat & Back, Leatherette Tapestry, Make-Featherlite/ Geeken/ Equivalent

Providing, Making & Fixing of Wooden Linear Workstation Table Having Keyboard Tray & Cable Manager Made of 1 Layers of 19MM Board with All Edges to be Lipped with Teak Wood Beading & All Outside Exposed Surface To Be Finished With 1MM Laminate, Complete In All Respect As Per Drawing, Specification Approved By Architect/ Engineer In Charge. Customized

Providing, Making & Fixing of Wooden Hanging Bench Made of MS Understructure & Then Fixed with 25MM Indowood Board & Exposed Surface To Be Finished With 1MM Laminate, Complete In All Respect As Per Drawing, Specification Approved By Architect/ Engineer In Charge. Customized

Providing, Making & Fixing of Display Cabinet Made of MS Structure & Then Fixed with 12MM Toughened Glass Having Locking Mechanishm & Glass Shelfs. The MS Structure To be Painted with approved colour Complete In All Respect As Per Drawing, Specification Approved By Architect/ Engineer In Charge. Customized

Providing, Making & Fixing of Wooden Shooting Table Made of MS Understructure & Then Fixed with 25MM Indowood Board & Exposed Surface To Be Finished With 1.5MM High Pressure Laminate, Complete In All Respect As Per Drawing, Specification Approved By Architect/ Engineer In Charge. Customized

Supply & Installation of Executive Table, Particle Board Top, (1950x2000x750), Make-Featherlite/ Geeken/ Equivalent

Examination Deluxe Couch, Rachet Mechanism, Five Drawers, Powder Coated, Make-Featherlite/ Geeken/ Equivalent

Supply & Installation of Low Height Chair, Without Arms, Powder Coated Pipe Frame, PU Seat & Back, Make-Featherlite/ Geeken/ Equivalent

Providing & Placing of Information Reception Table, Superstructure made of 19MM Board & then cladded with Stone Finish Laminate From Outside & 1MM Laminate Inside. The Table will have a drawer unit cable manager all complete as per design approved by E/I & Architect Incharge. NSI

VRV AC-CONDITIONING WORK

HIGH SIDE ODU 56 HP (HEAT PUMP)

ODU 60 HP (HEAT PUMP)

DUCTABLE UNIT 5.62 TR +CORDED REMOTE + REFNET

DUCTABLE UNIT 6.6 TR +CORDED REMOTE + REFNET

DUCTABLE UNIT 8.27 TR +CORDED REMOTE + REFNET

HI WALL UNIT 0.83 TR CORDED REMOTE +REFNET

HI WALL UNIT 1.06TR CORDED REMOTE +REFNET

HI WALL UNIT 1.32 TR CORDED REMOTE +REFNET

CASSETTE TYPE 3.31TR + CORDED REMOTE+REFNET

LOW SIDE One Time Lifting, shifting, positioning, installation, testing of indoor units, outdoor units, fittings(Imported Y-joints & header etc.) remote controls of indoor units, complete as per specification and drawings.

Outdoor Unit

Indoor Units

Cassette AC

Hi wall AC

Ductable AC

Commissioning of VRV systems including topping R410A gas per site requirements

Refrigerant Piping Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported

Cable tray for copper pipe

PVC Drain Pipe with 6 MM nitrile insulation

32 mm dia

25 mm dia

40 mm dia

Control & Transmission Wiring

Providing & fixing control cum transmission wiring of copper in suitable conduits between indoor and out door unit. & for remote

Supply & Laying of M S Slotted Angle for pipes and cables horizontaly and vertically along with threaded rod, nut, bolt, saddle, tie etc.

DUCTING Supply, fabrication, installation, balancing and commissioning of site fabricated GSS sheet metal rectangular ducting as per IS-655 complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following gauges:-

24 Gauge ( Thickness 0.63 mm)

22 Gauge ( Thickness 0.8 mm)

INSULATIONS Supplying and fixing of following thickness Nitrile insulation on duct after applying Suitable adhesive. The joints shall sealed with 50 mm wide and 3 mm thick self adhesive tape insulation complete as per specifications and as required .

6 mm thick (In Condition Space)

ACCOUSTIC Supply, Installation, Testing and Commissioning of Acoustic lining inside ducts using Non Fibrous fire retardant cross-linked polyethylene foam(INSUsound-Xlo) of 30+/- 3 Kg/m3 density & thickness of 12mm having porous surface on one side & a flat surface on other side using Synthetic rubber based Adhesive preferably Low VOC & high strength characteristic

12 mm thick

GRILLS

Supply, installation, testing and commissioning of extruded aluminium powder coated linear grills.

DIFFUSERS

Supply, installation, testing and commissioning of extruded aluminium powder coated supply / return air diffusers

DAMPERS

Supply, installation, testing and commissioning of volume control damper of Ms Black Painted

Wall Chaseing

Core cutting

Outdoor stand

Globalzone Sanitory Infrastructure Pvt. Ltd.