Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹49.1 LAccepted-AOC | L-1 | Accepted-AOC Lowest | |
| 2 | L-2₹54.5 L+₹4.9 L (9.90%)Rejected-AOC | L-2 | Rejected-AOC Other than Lowest |
Tender Value
₹45.5 L
EMD Value
₹91,000
Closing Date
1 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 969 EWS
GE 969 EWS C/O 56 APO
SPECIAL REPAIR TO BLDG NO T-15 OF MAIN OT QM STORE AND BLDG NO T-61 PATIENT OPD HALL AT FSC RAMPUR,SPL REPAIR OF WASHOUT DRAIN AT MES WATER POINT,PROVN OF GUARD ROOM WITH SENTRY POST AT RAMPUR UNDER GE 969 EWS.
2022_MES_543340_1
CANO 969/WS- /2022-23
Open Tender
Civil Works
Item Rate
180 days
rampur
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE 969 EWS
₹91,000
Yes
17 Oct 2022
4 Aug 2022
3 Sept 2022
4 Aug 2022
1 Sept 2022
18 Aug 2022
Amount
Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
Demolition of cement concrete (reinforced) in any position and any thickness (below or above ground level) all as directed.
Demolition of cement concrete (un-reinforced) in ground floors and pavings any thickness (below or above ground level) all as directed.
Dismantling of plain or corrugated steel sheeting ,any gauge, thickness, including Nainital or similar pattern roof coverings in any position complete all as specified and directed.
Dismantling floor,hearth or wall tiling including cement mortar bedding(but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Taking down cement plaster on brick or stone walls etc. including raking out joints hacking for keys scrubbing down with water etc
Taking up or down GI tubing 15mm bore with all connection complete.
Taking down chowkat or frames with shutter (without taking off shutter from the frame)area exc 1.5 Sqm but n.exc 4.0 Sqm each complete with hold fasts etc.
Taking down chowkat or frames with shutter (without taking off shutter from the frame) area n exc 1.5 Sqm each complete with hold fasts etc.
Taking down shutter of any description area exc 1.0 Sqm but n.exc 2.0 Sqm complete all as specified and directed.
Taking down shutter of any description area n exc 1.0 Sqm complete all as specified and directed.
Hacking out old broken glass of any thickness ,size, quality or Description n exc 1.5 sqm from wooden /metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones etc
Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil.
Removing excavated material (soil) exc 250 M but n.exc 500 M and depositing where directed.
Excavation in trenches in soft/loose soil n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth for fdn,shafts,pier hole n. exc. 10 sqm on plan and getting out soft/loose soil,complete all as specified and directed.
M&L for PCC 1:5:10, type E-2, using 40 mm graded mechanically crushed stone aggregates as in foundations, filling, sub base and mass concrete, complete all as specified.
PCC 1:4:8 type B2 using (20mm graded crushed aggregate) as in sub base and in foundation concrete complete all as specified and directed.
M & L PCC 1:2:4 B0 (using 12.5mm graded aggregates) 25mm thick as in flooring finished rough for fixing of tiles complete all as specified and directed.
Returning filling , including, spreading, levelling and well ramming in layers n.exc 25cm complete all as specified and directed.
Earth filling under floors , including, spreading, levelling, well ramming and watering in layers n.exc 25cm complete all as specified and directed
Walling of random rubble, stone masonry uncoursed well bonded bedded built in cement mortar (1:6) and pointed flush with surface in contact with earth complete all as specified and directed.
M & L brickwork with subclass `B` straight or curved on plan n.exc 6m mean radius built in CM 1:4 complete all as specified and directed.
M&L brick work with sub class B bricks straight or curved on plan to any radious in half brick thick built in CM 1:4 complete all as specified and directed.
Formwork to sides of footing, plinth band, lintel band etc complete all as specified and directed.
Formwork to sides of columns complete all as specified and directed.
M & L formwork to edges of concrete flats, treads, floor and roofs n.exc 20cm wide complete all as specified and directed.
M & L formwork to soffits of suspended slabs such as roof slab n.exc 200mm thick complete all as specified and directed.
M & L Reinforcement cement concrete Type M-25 (20mm graded crushed aggregate) as in footing, plinth band complete all as specified and directed.
M & L Reinforcement cement concrete Type M-25 (20mm graded crushed stone aggregate) as in , columns complete all as specified and directed
M & L Reinforcement cement concrete Type M-25 (20mm graded crushed stone aggregate) as in, beams & lintels complete all as specified and directed.
M & L Reinforcement cement concrete Type M-25 (20mm graded crushed stone aggregate) as in slabs, chajjas supported on walls, complete all as specified and directed.
Providing precast cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in cover slabs and similar articles including necessary moulds/formwork set in cement mortar (1:6) complete all as specified.
Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns,hooking ends and binding with and including mild steel wire (annealaed) not less than 0.9mm dia or securing with clips quality conforming to Fe-310-0 or Fe-410-0 all as specified and directed incl drilling to cement conc surface for fixing of reinforcement in position all as specified.
TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Ditto as above item No. 34 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.
Extra over stone walling for hammer with maximum depression on face rom straight edge held against the dressed surfaces not exc 20 mm to face stone( grnite or trap basalt) and dressing of face beds and joints as specified of random rubble walling of lime or sand stone uncoursed or brought up to course complete all as specified and directed.
Extra over forming fair finished drain or channel 23 cm inner girth in cement concrete using extra cement including forms moulds, mitred/ stopped ends etc, complete all as specified and directed.
Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed.
Rendering 15mm thick cement plaster on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.
Supply only liquid water proofing compound.
S&F , rolled mild steel of grade Fe -410-W(Grade E-250), quality "A" in roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee,angle, channel or flat sections) including distance pieces,cleats etc.
S&F wind ties for roof including all as necessary drilling, bolting etc conforming to Fe-290-0 or Gde E-165 including two coat of synthetic enamel paint complete all as specified and directed.
S & F mild steel works as in bands, straps, supports or stays for rainwater, ventilating pipes incl bolts if required, hooks, hasp and staple, clamps, hold fasts , wall ties, hooks for hanging fans, plain angle cleats etc and similar works.
Supply and fixing, pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.
All as per item No 44 above but using plain steel sheet complete all as specified and as directed.
S&F 0.63mm thick grade 'O' with 120gm per sqm zinc coating corrugated galvanised iron steel sheeting with two corrugaion side lap (Horizontal distance of side and end lap shall not be less than 145mm and 150mm respecively fixed with L Type or J Type or cranked hook bolts in roof complete all as specified and as directed.
All as per item No 46 above but except sheeting.
S&F 0.80mm thick grade 'O' Plain with 120gm per sqm zinc coating, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings complete all as specified and as directed.
All as per item No. 48 above but using plain steel sheet complete all as specified and as directed.
M&L for hard core of broken stone or boulders of gauge n.exc.63mm deposited,spread,levelled in layers n.exc.15cm thickness,watered and rammed to a true surface.
M&L for PCC 100mm thick type D-2, 1:4:8 (40mm graded aggregate) as in sub base.
M & L machine cut Kota stone slab flooring 20-25mm thickas per sample kept in GE's office,laid over and incl 15mm thick cement screed basein CM 1:6 ,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing, gridding and polshing to achive mirror finish complete all as specified.
M&L Coloured glazed ceramic tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 15mm thick mortar bed in CM 1:4 complete all as specified and as directed.
Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangle) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.
M&L Mat finish Non Skid coloured ceramic tiles 7mm to 8mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in whited or coloured cememtn to match dark shade tiles. all as specified including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.
Material and labour, machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade in different colours, laid over and including 25mm thick sand cushioning and joints filled with fine sand, complete all as specified and directed.
M & L Chequered cement concrete tiles of size 30cm x 30cm x 25mm thick (with grey cement and pigments) set, jointed and pointed in neat cement slurry in floor,laid over and incl 15mm thick cement screed base in CM 1:6,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing, grinding complete all as specified.
M&L C. conc M-10 (Nominal mix) type C-1 using 20mm graded aggregate as in surface channel and drain all as specified.
S&F 2nd class soft wood plain soild,straight chowkats and frame wrought,framed rebated on soild,rounded or chamfered,put together with pinned at joints all as specified.
S & F for 35mm thick flush shutter,solid core construction with block board core and plywood face panels,commercial on both side supplied and fitted to chowkhats complete all as specified and as directed.
S&F 35 mm thick plain,framed,pannelled shutters(any number of pannel),with pannel of timber flat on both sides (feather edged),or of veneered particle board medium density, wood particle board with commercial face venner; supplied and fitted to chowkats, complete all as specified and directed.
S&F 30mm thick 2nd class soft wood glazed & skeleton door shutter open rebated and prepared to receive glass or wire mesh gauge etc (without sash bars) edges of framings plain, chamfered or rounded, fitted with cut and mitred beads for securiny glass etc size of members of shutters as specified in SSR Part-II section 8 clause 8.23(b)
Dismantling boarding/wall panelling any description fixed in any position with nails
Dismantling fillets, rails, posts, rafters, purlins,etc under 40Sqcm in section
Dismantling fillets, rails ,posts ,rafters, purlins,etc over 40Sqcm in section
M&L 4mm thk one face decorative Plywood, grade BWP, type BB fixed with screws to timber frame work on wall complete all as specified and as directed.
M&L 4mm thk one face decorative Plywood, grade BWP, type BB fixed with screws to timber frame work on ceiling complete all as specified and as directed.
M&L for second class soft wood (Kail) clean swan timber fixed in scantling.
M&L 2nd class soft wood Plain fillets exc 13 Sq.cm , n exc 25 Sq.cm rectangular in section, clean sawn screwed with nails or brads all as specified.
S&F wood grain Factory made PVC solid door/window/ventilator frame of size 50mmx47mm made out of 5mm prelam sheet in stead of plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M S square tube complete frame fixed with screws/nails /bolts to walls complete all as specified.
S & F Prelaminated PVC board, interior grade, prelaminated one side with decorative choice lamination and otherside balancing white lamination fixed with screw to timber frame work 25mm thick as in cup board.drawers/shelves/petmets with teak wood batton lipping complete all as specified and as directed.
M&L PCC 1:3:6 type C1 in hold fast etc incl all necessary formwork.
RCC type B-1, using 20mm graded crushed aggregate as in slab supported on walls, beams and columns in floors, roofs, lauding, ballonies and in shelves and the like complete all as specified and as directed.
PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete ( bed to drain) complete all as specified and directed.
S&F 100mm size MS butt hinges medium weight cold rolled complete all as specified and directed.
S&F 200mm length aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 150mm length aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 100mm length aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 150mm length aluminium anodised handle cast type complete all as specified and directed.
S&F Aluminium alloy, anodised, sliding door bolt 300MM with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.
S&F 3.00mm thick sheet glass ordinary quality and glazing with oil putty or with wooden beads n.exc 0.5 sqm in each pane).
S&F 5.50mm thick tinted glassand glazing with oil putty or with wooden beads n.exc 0.5 sqm in each pane).
S&F, Galvanised mild steel wire cloth 0.56 nominal dia of wire and width of aperture 1.18mm complete all as specified and as directed.
S&F framed work such as grills gratings etc with end of bars shoulderd and or riveted or forged in to spikes framed guard bars, barred iron doors etc and similar work concorming to Fe-290 Gde E-165 complete all as specified and as directed.
S&F in steel tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors of 20mm bore complete all as specified and as directed.
S&F in steel tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors of 15mm bore complete all as specified and as directed.
S&F bib tap of CP fancy type with butterfly handle screwed down screwed for iron pipe of 15mm bore fixed in repairs complete all as specified and as directed.
S&F pillar tap cast copper ally with capstan heads, chromium plated screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe pipe and fixed owith 15mm bore in repairs complete all as specified and as directed.
S&F angle valves cast copper alloy screwed down high pressure of fanciy type chromium plated screwed both ends for iron pipe or for union and fixed with 15mm bore in repairs complete all as specified and as directed.
S&F Gun metal globe or gate valves with iron wheel head ,screwed both ends for irion pipe and fixed to 15mm bore all as specified
S&F Gun metal globe or gate valves with iron wheel head ,screwed both ends for irion pipe and fixed to 20mm bore in repairs complete all as specified and as directed.
Vitreous China squatting pan,Orissa Pattern size 580x440 mm white with integral foot rests exccludidng flushing cistern flush pipe including connection to trap,anti syphonate pipe etc. complete,fixed all as specified
S&F PVC connection 15mm size with PTMT nuts of length 450 in repairs complete all as specified and as directed.
S&F in Rotational moulded polyethylene water storage tanks (cylindrical) vertical with closed top ) hoisted and fixed in poisition all as specified in SSR Part I of 500 ltrs.
Vitreous china ware wash hand basin white flat back size 550x400mm size including brackets and PVC pipe check nut complete fixing accessories incl taking out existion.
PVC low level Flushing cistern of capacity 10 liters capacity fixed in repairs complete with all fittings.
PVC floor traps plain with gratings incl jointing to waste pipe with solvent cement dia of out let 75mm complete all as specified.
S & F PVC (SWR) pipe 110mm bore single in any type with rubber ring joint laid in wall/trenches /floor.
S & F PVC (SWR) pipe 75mm bore single in any type with rubber ring joint laid in wall/trenches / floor complete all as specified and as directed.
S & F PVC (SWR) bend any radious 110mm bore.
S & F PVC (SWR) 110mm Junction single (single T) equal or unequal.
S & F PVC (SWR) vent cowl 110mm bore.
S & F PVC (SWR)gully trap 125/110mm setting and jointing with solvent cement as fixed in repairs
S & F PVC(SWR) reducers 75/110mm bore.
M & L PVC(SWR) floor trap 75 mm dia and over , plain with grating incl jointing with sovent cement as fixed in repairs complete all as specified and as directed.
M&L for 200mm bore reinforced concrete pipes, class NP2, laid and jointed complete all as specified and as directed with collars complete all as specified and as directed.
M&L for 300mm bore reinforced concrete pipes, class NP2, laid and jointed complete all as specified and as directed with collars complete all as specified and as directed.
M&L for 400mm bore reinforced concrete pipes, class NP2, laid and jointed complete all as specified and as directed with collars complete all as specified and as directed.
Septic tank excavation in ordinary soil, foundation in PCC 1:2:4, brick work in CM 1:4,RCC Slab including RCC precast cover slab with angle frame Vent shaft complete for 25 users.
Soakage wells excavation in ordinary soil, Foundation in PCC 1:3:6, honey combed and solid filling with brick bats, RCC including vent pipe and cowl complete of size 2.40 M dia X 3.00 M deep.
150 mm dia SGSW pipes exc, in any type of soil at average depth of 1.5 M, inclusive of manholes RCC precast manhole cover, PCC bed, including packing under and haunching against sides.
M&L for PCC 1:2:4 type B-0 Using 12.5 mm graded stone aggregate for benching,coping etc.
M&L 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement ,complete all as specified.
Preparation of new or previously untreated surface of wood of any description not otherwise described over 10 cm width or grith two coat of synthetic enamel paint over a coat of of red oxide including as specified.
M&L for preparation of new plastered surface and applying Two coats of cement base paint incl one coat of alkali resistant complete all as specified and directed.
M&L for preparation of new plastered surface and applying Two coat of distemper complete all as specified and directed.
M&L for preparation of new plastered or unplastered surface and applying Three coat of white wash on walls complete all as specified and directed.
Preparation of new steel surface , not otherwise described over 10 cm width or grith two coat of synthetic enamel paint over a coat of of red oxide including as as specified.
Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc.
M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor.
(a) One light point/fan point/Ex fan point controlled by one 5 Amps switch one way
(b) One 3 pin 5 Amp switch socket outlet on same board with accessories
(c) One 3 pin 5 Amp switch socket outlet on independent board
S&F switch piano Flush type, single pole, one way 5 amp 240 volts, complete all as specified and as directed.
S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and as directed.
S&F Switch socket combination 2 in1, 3 pin,5 and 15Amp flush type,universsal complete all as specified and as directed.
M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor.
S&F Switch socket combination 2 in1, 3 pin,5 and 15 Amp flush type,universsal complete all as specified and as directed.
Supply and fixing LED lights fitting 1x 22 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
S&F in repairs Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed.
S & Fix Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified.
S & F in repairs MCB, SPN 63 Amps 240 Volts C curve, complete all as specified and as directed.
S & F in repairs MCB, SPN 32 Amps 240 Volts C curve, complete all as specified and as directed.
S & F MCB SP 6 to 32 Amps, 240 Volts, C Curve complete all as specified and directed.
S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200 Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.
S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 4 ways, 240 V with 200 Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and as directed.
S&F 1100 V grade heavy duty cable with pvc insulated aluminium conductor served with an inner sheathing of pvc tape and overall pvc sheathed in service connection suspended by insulating hangers not more than 1mtr apart including 4mm suspension wire one twin core cable flat or circular of size 10 sqmm all as specified and directed.
S&F 1100 V grade heavy duty cable with pvc insulated aluminium conductor served with an inner sheathing of pvc tape and overall pvc sheathed in service connection suspended by insulating hangers not more than 1mtr apart including 4mm suspension wire one twin core cable flat or circular of size 6 sqmm all as specified and directed.
S&F in repairs TPN 8 way Double door metallic sheet metal enclosure with TP MCCB 125 Amps as incomer and 24 MCB 6-32 Amps as outgoing complete, 415 Volt with 240 amps rated Bus Bus bar fixed properly on in concealed position and to provide required sizes of flexible conduit/casing caping at any open surfaces near DBs of cables/wires all as directed.
S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm 3.5 core all as specified and directed.
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.
Supply and fixi LED Bulb 12 Watt.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm.
M & L sub main wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit/casing caping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 6 sqmm and one run of 6 sqmm cable and one run of casing capping shall be measured as one RM.
S & F House service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Med. grade, two nos 900 bends. M.S. hook and stay or guy including taking down.
M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is ilnclusive of necessary earth work as Excavation, RF and removal etc.
Note:- Schedule of credit Rs.49,227.50 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.
k create innovative engineering solution
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .