SPECIAL REPAIRING WORK FOR SOCIAL FORESTRY DEPARTMENT BUILDING AT HANSOL, AHMEDABAD (INCLUDING ELECTRIFICATION WORK)(Second attempt)(SBD)

Item No. Description of Item Qty Unit Rate in words Amount in Rupees

(Electrical works)

Providing & Erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. mm copper PVC insulted FRLS wire 105.00 Point 372.00 RS: Three Hundred

with 1.5 sq. mm (green) copper PVC insulated FRLS wire for earth continuity in existing pipe with approved make Seventy Two only

5/6 Amp. ISI make modular type switch and accessories mounted in 20 G. G.I. company fabricated metallic box

covered with appropriate front plate modules erected on wall / ceiling with necessary modular lamp holder /

modular ceiling rose / HD Connector (make and model approved to be approved by EIC) as directed for

open/concealed wiring.Length of point wiring must not increase than 10 mtr. For that necessary switch boards

91a and their locations must be finalised before execution by agency otherwise payment will not be done for extra long

point. (For future extention, if required, agency has to erect one higher size metal box and modular plate as per

instruction of EIC. Cost of blank plate shall be paid as per tender item) [Wire must be having box packing in

existing pipe erected flushed on wall/ceiling complete Light point. Cat.-III.

For Secondary Light Point Cat-III( in existing pipe) 5.00 Point 84.00 RS: Eighty Four

Fan Point erected with 6A Modular type switch and hum free EME step type electronic fan regulator mounted 26.00 Point 517.00 RS: Five Hundred

91c cat.III ( in existing pipe) Seventeen only

For BELL Point Cat-III( in existing pipe) 1.00 Point 372.00 RS: Three Hundred

91d Seventy Two only

For separate Point (with 6 Amp. Switch & 5 pin socket both having ISI Make) Cat-III ( in existing pipe) 6.00 Point 385.00 RS: Three Hundred

Eighty Five only

For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket) Cat-III ( in existing pipe) 37.00 Point 255.00 RS: Two Hundred Fifty

Providing and erecting modular type accessories mounted on 20G G.I. company fabricated galvanised metal box 1.00 Each 788.00 RS: Seven Hundred

covered with approriate front plate modules erected flushed with wall/Ceiling with 1 Nos. TV Socket,1 Nos. of 16 Eighty Eight only

92 Amp SP Switch & 3 Nos. of 6 Amp 3/5 pin plug. [For TV Switch board] Cat III

Providing and fixing Plug Point wiring with 1.1 KV grade ISI marked approved make 2 x 2.5 sq.mm copper PVC 7.00 Point 526.00 RS: Five Hundred

insulated FRLS wire with 1.5 sq.mm (green) copper PVC insulated FRLS wire for earth continuity in existing pipe Twenty Six only

with adhesive solution erected on wall/slab along with continuous G. I. fish wire to draw wires & finishing the

surface to match the wall / ceiling complete with 16 Amp Modular type Swich and accessories mounted in 20 G.

GI company fabricated metallic box covered with appropriate front plate modules erected flushed with wall. (a)

Amp. Indicator switch & 1 No. 6/16 A universal socket white colour suitable for 3/5 pin top duly both having ISI

mark. (Necessary sheet / tape / polythene / sand must be erected or filled in all box To Prevent Mortor Going In

To The Box) Cat.-III. (Conductor resistance should be as per IS:8130/1984)

Providing and fixing Plug Point wiring with approved ISI marked 1.1 kv grade 2 x 4.0 sq.mm copper PVC 2.00 Point 662.00 RS: Six Hundred Sixty

insulated FRLS wire with 2.5 sq.mm (green) copper PVC insulated FRLS wire for earth continuity in existing pipe Two only

with adhesive solution erected on wall / slab along with continuous G.I. fish wire to draw wires & finishing the

surface to match the wall / ceiling complete with approved make 20 Amp. Modular type indicator switch and

accessories mounted in 20 SWG GI company fabricated metallic box covered with appropriate front plate

modules erected flushed with wall / ceiling. (a) 16 Amp Indicator switch & 1 No. 16 A universal socket white colour

94 suitable for 3 pin top duly both having ISI mark (A.C POINT ONLY) CAT III (Necessary sheet / tape / polythene /

sand must be erected or filled in all box to Prevent Mortor Going In to The Box)

(Conductor resistance should be as per IS:8130/1984)

Providing and erecting Medium Class FIA approved and ISI mark white colour (embossed) RIGID PVC PIPES of 607.00 Mtr. 24.00 RS: Twenty Four

following size complete erected with necessary PVC fittings & Junction boxes fixed with adhesive solution. only

95a concealed in wall / slab along with continuous fish wire to draw mains, laid in approved manner. Zari for PVC Pipe

& Boxes shall be plastering by cement mortar & finishing the surface to match the wall / ceiling. For 20 mm dia.

For 25mm dia. 445.00 Mtr. 33.00 RS: Thirty Three

Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double-locking arrangement with 110.00 Mtr. 22.00 RS: Twenty Two

grooves, trunking of size not below 12.5 mm in height as per IS with accessories of PVC/Resin polypropylene not only

96a below 1.8 mm thick duly sealed in joint & erected on wall / ceiling of following size. For 20 mm

For 25 mm 100.00 Mtr. 31.00 RS: Thirty One

Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, chloride rigid material with 80.00 Mtr. 424.00 RS: Four Hundred

ignition free & flame proof confirming BS .All necessary accessories and measuring of following sizes. For 100 Twenty Four only

97 mm x 50 mm trunking (MK, LEGRAND, OBBO make Only])

Providing & Erecting Mains with FRLS PVC Insulated wire ISI marked 1.1 KV grade with FIA approved ISI mark 600.00 Mtr. 46.00 RS: Forty Six only

medium class 20/25/32 mm dia. embossed rigid PVC casing capping with PVC fitting fixed with adhesive solution

to be erected on/in brick wall / slab along with continuous G. I. fish wire to draw mains laid in approved manner

with plastering by cement mortar & finishing the surface to match the wall / ceiling complete with FRLS PVC

98a insulated wire for earth continuity. (Approved ISI make only) For 2 x 1.5 sq.mm. FRLS copper multi stranded

conductor mains with 1.5 sq.mm. FRLS copper multi stranded conductor for earthing as per standard colour

code. -In Existing Pipe [Wire must be having box packing]

For 2 x 2.5 sq.mm. FRLS copper multi stranded conductor mains with 1.5 sq.mm. FRLS copper multi stranded 560.00 Mtr. 62.00 RS: Sixty Two only

conductor for earthing as per standard colour code. -In Existing Pipe [Wire must be having box packing](

For 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. FRLS copper multi stranded 240.00 Mtr. 120.00 RS: One Hundred

98c conductor for earthing as per standard colour code.-In Existing Pipe [Wire must be having box packing] Twenty only

For 4 x10.0 sq.mm. FRLS copper multi stranded conductor mains with 4.0 sq.mm. FRLS copper multi stranded 30.00 Mtr. 395.00 RS: Three Hundred

98d conductor for earthing as per standard colour code. [conductor resistance should be as per IS:8130/1984] Ninty Five only

Providing & erecting following size of TV Co-axial flexible cable comprising inner conductor of solid bare copper 25.00 Mtr 39.00 RS: Thirty Nine

insulated with Foam PE & Secondary conductor made of poly - Aluminium film bonded Al. Braids @ suitable only

99 coverage overall sheathed with black PVC insulation. For RG-6 [Polycab/ Finolex / RR Kabel Make]

Supplying and Erecting LED indoor fitting of approximately 4feet long with LED of wattage 0.2W to 0.5W 69.00 Each 370.00 RS: Three Hundred

assemble on single MCPCB with housing use as a heat sink shall be made from Aluminum extrusion having Seventy only

enough strength (sample must be approved by EIC) with polycarbonate diffuser with following specification: (A)

Company mark/name on the fitting.(B) Rated input voltage and frequency: 220V to 240 VAC ; 50Hz.(C) Rated

input wattage: max. 24w(D) Rated input current : 0.2 Amp

(E) Power Factor : Min. 0.90(F) ATHD : Max. 15%(G) Rated Luminous flux: Min. 2420 lm

(H) CCT: 6500K(I) CRI: Min. 80Ra(J) Driver Efficiency: Min. 80%(K) LED life span: Min. 50000 Hrs @ L70(L)

Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.(M) Surge protection : Min. 2KV

(N) IP rating: IP 20(O) IK rating : IK 02(P) Short circuit , Open circuit & Reverse Polarity Protection must be

provided(Q) Fixing clamp design & strength should be sufficient to hold the fitting erected on wall or ceiling.(R)

core copper wire of appropriate size with earthing connector

(Note:-The manufacturer/ authorized Channel partner of the manufacturer has to submit 5 yrs free replacement

Guarantee for complete Fixture) [Approval will be given strictly subject to item specification]

SITC of Indoor Commercial Recess / Surface mounted (IP20) 18 W Cool/Warm white Color LED Down lighter 7.00 Each 584.00 RS: Five Hundred

office Lighting Luminaire with separate potted driver with single piece pressure die cast aluminium alloy housing Eighty Four only

with corrosion resistant powder coated finish with PMMA/PS/Injection moulded Polycarbonate diffuser with high

brightness LED complete (only from Philips Lumileds, CREE, Nichia, Bridgelux, Seoul & Osram) CRI > 80, CCT

5600K (5400 to 5800K bin). The LED's should be mounted on back lit metal core PCB for better heat conduction

and long life of LED. The Fixture should comply all International Standarad third party (LM 79 for complete fixture,

LM80 for individual LED). The Fixture have protection like miswiring, over voltage, over load, wrong wiring, THD <

15%,, P.F > 0.95, efficiency ≥ 90 lm/w & driver efficiency > 85%. For 18 W fixture wide voltage range from 160 V

to 270 V, 50/60 HZ @ 240V application, 4 KV surge protection.

The fixure must have min. 1620 lumen light output. The fixture should be provided with external separate Potted

driver, latest Valid BIS approved Luminaire and driver. The Fixture efficiency ≥ 90 lumens/watt only for safety and

performance. (L70 @ 30,000 Hrs.) The fixture should be able to easily mount on POP / Grid false ceiling. The

Luminiare should be tested as per IP 20 and following test reports should be submitted at the time of approval:

heat resistant test, thermal test, Ingress protection test, drop test, Photobiological report with 3 core X 1.0 Sq.mm.

flexible wire as per site requirement [Note:-The manufacturer / authorized Channel partner of the manufacturer

has to submit 5 yrs. free replacement Guarantee for complete Fixture]

Providing and erecting max. 10 W LED battern having main housing aluminium extruded and front cover of 3.00 Each 309.00 RS: Three Hundred

polycarbonate. Electrically and photomatry parameters are as under:240 V, 50 Hz. System wattage.:10W+10%, Nine only

PF>=0.95, system lumens min. 1000, CCT- 3000K to 6500K, CRI>=80, THD<=15%, Delivery efficiency>=85%,

LM 80 certified LED, 30000 Hrs@ L70, Electronic CC driver, insulated copper wire, for internal wiring, IP20

Operating voltage:160 to 270 V, Surge-2 KV, length of this fitting should be 2ft.

Luminaire efficacy> 85 lumens/watt ,LED

102 LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) Tube Light

with integral driver 8 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet

Supplying and erecting 3 W LED lamps with following wattage capacity of 220 to 240 voltage, minimum 15000 1.00 Each 69.00 RS: Sixty Nine

burning hours life, 500 V in built-surge protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 only

103 lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable LAMP holder

Supplying and erecting 8 W LED lamps with following wattage capacity of 220 to 240 voltage, minimum 15000 25.00 Each 111.00 RS: One Hundred

burning hours life, 500 V in built-surge protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 Eleven only

104 lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable LAMP holder

Supplying and erecting approved make 200mm sweep low noise decorative exhaust fan having Aerodynamically 1.00 Each 1,687.00 RS: One Thousand Six

designed and Blanced Blade, Blade finish Opaque,body colour White , finish Glossy , Rated Speed 1800 Hundred Eighty Seven

revolution per minute ,air delivery 500m³ / hr , noise level 50 dB , Power Consumption 35 W, ,Rated Voltage only

230 V , no. of blades 7 , guard 18 Louvers , square frame ABS body with inbuilt lowers and square frame.(

Havells Make Ventilair LX or Bajaj, Usha, Crompton and Equivalent Model Approved by EIC subject to Above

Specification )

Providing and erecting PVC body surface mounting LED Bulk head type 9 watt Lighting Fitting with electronic 3.00 Each 780.00 RS: Seven Hundred

driver having THD < 15%, CRI>80, P.F.0.95 And lumen output from luminaire 720 lm, input voltage range 160- Eighty only

106 270 V AC, 50 Hz cool white (3000 to 6500 k), inbuilt driver having efficiency >=80lm/w, -20 deg C to + 60 deg C

working temperature, AL frame with Beam Angle 120 deg.

Providing and erecting Decorative Ding Dong call bell Stereo type 250 Volt complete erected on existing polished 1.00 Each 170.00 RS: One Hundred

107 wooden block or in M.S. box with 3 mm thick white ISI mark laminated sheet. (Anchor (chime), Vision, Rider Seventy only

Supplying & erecting Electronic Type Cordless Call Bell erected on PVC/Metal board having portable bell push 1.00 Each 248.00 RS: Two Hundred Forty

108 working on D.C. & bell on 230V A.C. supply with cells / battery Eight only

Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 AMDT No. 1 to 6 Class-I, 50 Hz. Specification 26.00 Each 1929.00 RS: One Thousand Nine

of Ceiling Fan must be as per below. (1) Sweep: 1200 mm, (2) Operating Voltage: 180 to 230 V, (3) Power Factor: Hundred Twenty Nine

> 0.9, (4) Power Consumption: maximum 53W, (5) RPM: minimum 330, (6) Service value:min 4.3 m3/min. (7) only

Class of insulation: 'B', (8) No. of heavy duty premium quality Ball bearing: Two, (9) Total Body: Top & Bottom

should be alluminium, (10) Blade: Aluminium approx 1.1 mm thick, (11) Colour: White high grade powder coating,

(12) Canopy: Two Nos. Heavy duty, (13) Condenser: min 1.5 MFD (15% Tolerance )as per is 1709-1984,

109 Aluminium body premium quality, Branded make,(14) Down road: up to 1.0 mtr as per site requirment, (15)

Required fixing accessories, (16) 3 core 0.75 sq.mm ISI wire as per site requirment, (17) No vibration and noise

due to mechanical parts. (Agency has to erect safey wire with ceiling fan and checked with EIC) (OEM has to

approved model as per tender specification and tested at ERDA) (Necessary test reports should be submitted

strictly at the time of approval. Sample approved by EIC subject to above specification only)

Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. Bolt & Nuts erected with necessary hook 26.00 Each 98.00 RS: Ninty Eight

110 of 10 mm M.S. Round Bar. only

Supplying and erecting Fabricating terminal box for street light pole made from 16 SWG M.S. sheet having 8.00 Each 702.00 RS: Seven Hundred

following size complete with fixing arrangement for terminal board, with necessary hole for wire entry and exit from Two only

the box. The box shall be provided with cover and hinges on one side and bolting at other end The box shall be

fixed by clamps fabricated from 25mm x 6mm flat.The box shall be painted with one coat of red oxide and two

111 coats of paint having following box size 330 mm x 260 mm x 140 mm (depth). Providing and fixing Terminal board

of size 5.0 x 127 x 152.4 mm.bakelite sheet with 15 Amp. kitkat pattern porcelain fuse unit with suitable brass

studs with nuts, washers and clamps of size 25 mm x 3 mm suitable for pole painted with one coat of red lead

Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked copper wires of 15.00 Mtr. 46.00 RS: Forty Six only

following size to be erected as directed. 3 core 1.5 sq.mm. PVC insulated round copper wire ISI mark. (streetlight)

Providing , erecting , testing and commissioning Insu Intelligent Streetlight Controller specially design for energy 1.00 Each 20,255.00 RS: Twenty Thousand

saving in conventional streetlight system ( Cat. No. SLC-03-1Ph-7.5KVA-20Amp/Cat NoSLC-03-1 ph-15 KVA 20 Two Hundred Fifty Five

amp per phase) having technial specification ,1 phase 2 wire, 230 V AC/ph +/- 25% R Y B N 2 Wire supply only

System.50 Hz (+ / - 10 %), 2 W (Stand By) to 4 W (at street light operation)consuption, Advance 8 bit micro

controller, switching on longitude and latitude base, accaracy of +- 1 minute per month. with inbuilt battery, with

battery life of more than 8 years, with speicial device which hold the parameter for more then 10 years without any

power and password protected. 16 character and two line LCD display with backlight, 4 keys user friendly

keyboard system, 7500 VA feeder pillar capacity, 63/100 amps isolator ,3 Outpus with termination 40/63 Amps

113 2/3 pole contactor , 3X16 Amps with F R cable provision to by pass by way of relay operation through

auto/manual switch, 2 to 55 centigrade and humidity 90 % non condensing Outdoor type installation on pole with

clamps.(Provided with clamps and nut bolt) or wall or floor, three locking system flush type internal panel lock,

external pad lock and internal U clamp locking systems for against theft of panel. having 17/25 Kg weight ,16/18

guage MS weather proof with industrial exterior powder coated with 7 tank process RAL

Providing & erecting bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm outside diameter complete with 7.00 Each 487.00 RS: Four Hundred

suitable G.I. Sleeve tubing of 2 mm. thick and required size and length suitable for 76.5 / 80 mm. required size of Eighty Seven only

pole top or pipe in pipe surface for terrace as per instruction of EIC or wall bracket as per instruction of EIC

having nuts and bolts for fixing the brackets and having spread of Upto 0.50 mtr. length with suitable rise as per

site condition and suitable welded stiffner reducer and nipple with check nut complete painted with one coat of

yellow zinc and two coats of alluminium paint for Single arm bracket suitable for pole or terrace as per design

given by EIC (a) For single arm bracket. (Jindal / Asian / Tata / Surya Prakash make Only) (Fabricators:- Bajaj,

Valmont, Transrail, Ambica, RR Ispat Only) (Test certificate to be submitted)

For Double arm bracket. (Jindal / Asian / Tata / Surya Prakash make Only) (Fabricators:- Bajaj, Valmont, 1.00 Each 616.00 RS: Six Hundred

114b Transrail, Ambica, RR Ispat Only) (Test certificate to be submitted) Sixteen only

SITC of Outdoor aesthetically designed LED Street Light Luminaire with total consumption of Max. 90W with 7.00 Each 6,117.00 RS: Six Thousand One

single piece die cast aluminium housing, high power LED shall be mounted on high quality metal core PCB with Hundred Seventeen

extremely precison designed heat sink complete with IP66 protection Class with polycarbonate / thoughened only

glass cover the fixture should be suitable for pole/bracket mounting. The fixture to comply both LM79 and LM

guidelines with LED module min. 130 lumen/watt with toughen Glass L70 at 50,000 hrs, provided with high quality

polycarbonate lenses for better light distribution. The watt capacity of Each LED must be >=4W in street light

fitting. The Fixture Should be able to be Pole Mounted and also bracket mounted, provided with high quality driver

115 for protection against high and low Voltage cut Off, opertional for high amibient and high humid envirnoments,

THD of driver should be less than 10% and P.F > 0.95. Also the Fixture should meet the following technical

criterias Oprating range Voltage 160 to 270 V, system efficiency >= 110 lm/w, and total lumens not less then

9900, CCT > 5000K, CRI > 65, beam angle 120 deg, surge immunity level at least 4 KV integral and 10 KV non

integral (Note:- The manufacturer / authorized Channel partner of the manufacturer has to submit 5yrs free

replcement Guarantee for complete Fixture)

SITC of specified make X color for Cat.-6 Data and Y color for Cat.-6 voice cable to be done in prelaid PVC pipe / 1200.00 Mtr. 47.00 RS: Forty Seven

raceway, but without the cost of raceway or pipe (the wire is to be drawn from MFD/ JB to outlet point) (a) CAT - only

116 6 (For Computer Cabling and For Voice Cabeling) (Molex, Avaya, D-Link, Legrand make Only)

SITC of 24 x 10/100/1000BASE-T ports 2.00 Each 23101.16 RS: Twenty Three

4 x Gigabit RJ45/SFP Combo ports Thousand One Hundred One

Advanced L2 switching and security features and Paise Sixteen only

117 L2+ Static Routing

Optional “standard mode” or “surveillance mode” management user interface

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

Supply, Installation, testing and commissioning of 24 port Cat 6 19" Toolless Patch Panel ( fully loaded) enable 2.00 Each 4357.00 RS: Four Thousand

all possible combinations of the various types of cable mounted on the same panel by using various toolless Three Hundred Fifty Seven

connector blocks/modules. Have a metal structure enabling them to be durably fixed to the uprights of the 19” only

chassis and assuring automatic grounding between toolless RJ-45 connectors, the panel, and the 19” uprights of

the enclosure. Include rear cable support with plastic cable guides to hold cable without need for cable ties.

Include quick mounting system to mount the panel into the 19” rails without use of cage-nuts. These may be

118 used to secure the connections of wifi access points, IP cameras, servers, or other critical devices. Front

Removal IO's option for maintenance and trouble shooting with 6 Different Colours Labels for Labelling &

Identification of Individual Ports. & as per attached details specification. (CAT 6 ) ( Make:- Molex,Commscope

Systemax/ Legrand/Panduit)

SITC of company fabricated CAT6 UTP 24 AWG Patch Cord - 1 mtr with cross separator , Manufactured from 35.00 Each 155.00 RS: One Hundred Fifty

stranded wires for longer flex-life , Minimum length of 1m, and maximum length of 5m Conforming to the Five only

following standards like EN 50173, ISO/IEC 60603-7 & 11801/IEC 60332-1, UL VW-1 with tensile strength

119 >50N.& as per attached details specification. For 1 Mtr. ,Plug 30U' Snag less ( Make:- Molex/Commscope

Systemax/ Legrand/Panduit)

SITC of company fabricated CAT6 UTP 24 AWG Patch Cord - 2 mtr with cross separator , Manufactured from 35.00 Each 199.00 RS: One Hundred Ninty

stranded wires for longer flex-life , Minimum length of 1m, and maximum length of 5m Conforming to the Nine only

following standards like EN 50173, ISO/IEC 60603-7 & 11801/IEC 60332-1, UL VW-1 with tensile strength >50N

120 & as per attached details specification. For 2 Mtr. ,Plug 30U' Snag less

( Make:- Molex/Commscope Systemax/ Legrand/Panduit)

Supply and installation of 9U steel rack for installing 4 nos. Ethernate switches/Hubs. The Rack should be fully 2.00 Each 11441.25 RS: Eleven Thousand

enclosed steel housing fabricated with 14 SWG sheet and powder coated with glass doors and having wire Four Hundred Forty One and

management systems. The rate includes the Exhaust Fan, 2 nos. 4 socket and 1 switch power strip and all the Paise Twenty Five only

121 wiring in the rack. (Rittal, Valrack, APC, Legrand Make and model approved by EIC as per specification)

Providing & erecting main Distribution (MDF) indoor type, back mounted frame as per DoT standard approved 1.00 Each 1730.00 RS: One Thousand

with krone strips For Suitable for 50 pair (Krone type) Seven Hundred Thirty

For Suitable for 20 pair 1.00 Each 1355.00 RS: One Thousand

122b Three Hundred Fifty Five

Supplying & erecting Delton or approved make Telephone Cable electrolytic copper conductor PE insulation 30.00 Mtr 20.00 RS: Twenty only

twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable

for telephone wiring & confirming to C-DOT erected in existing pipe.of following size of conductors & nos.of pairs.

123 With necessary connections. (A) Conductor size 0.5mm (a) Unarmoured (2) Two pairs [Make and model

approved by EIC Strictly subject to item specification only]

Providing & erecting Switch board for Computer or electric apparatus consisting of following items in single board 35.00 Each 1122.00 RS: One Thousand One

erected on Metal board with 3 mm thick PC (Polycarbonet) / Acrylic sheet erected as directed. 2 no. 6/16 Amp. Hundred Twenty Two

124 universal Socket, 2 nos. 16 Amp. indicator switch, 2 nos. 6 Amp. Switch & 2 nos. 6 Amp. 5 pin Plug. For only

Computer power Supply board. Cat.-III.

Providing following type of Modular Type Accessories mounted with 20g. metallic single mounting base frame 12.00 Each 159.00 RS: One Hundred Fifty

covered with textured / metallic/white front plate , modules erected with necessary connections as per site Nine only

125a situation directed by Engineer In charge.

For Two Pin/RJ-11 Telephone Socket Cat.III

For Computer RJ-45 socket Cat.III 35.00 Each 159.00 RS: One Hundred Fifty

Providing and fixing of ABC Type Store Pressure Fire Extinguisher Having capacity 6 kg Filled with Mono 1.00 Each 1991.00 RS: One Thousand Nine

Ammonium Phosphate Powder 50% confirms to IS 4308, Stored Pressure Type, UGTS Pressure Gauge, Can Hundred Ninty One only

Height 530 mm, Diameter 150 ± 10mm, Discharge Time 24 Sec, Controllable discharge mechanism, Jet Range

Meters, Average Discharge is 92%, applicable on Class A,B & C and electrically started Fire, Fire Rating

4A:144B, Can Construction : Deep drawn & CO2 Mig welded, EPDM(Ethylene Propylene Diene Monomer)

Rubber Hose with both end Aluminum clamped, Internal Coating - Epoxy Powder coating, External Coating - Pure

Polyester Powder coating (UV Resistant),Brass forged CE Marked valves with NRV & Auto Safety Release with

safety Pin is of SS material, Made up from 1.6mm thick sheet, Extinguishers confirmed to IS 15683:2018 and

126 ISI marked. Referance Weight:-Gross Weight 8.9 Kg, Empty Weight 2.9 Kg, 1. Necessary certificate & and

guarantee must be attached, 2. OEM has to provide wall mounting heavy duty bracket/clamp, screw, hardware

for installation. 3.Following printed marking Manufacturing Date and Expiry Date must be mention on

Extinguisher 4. Refilling period must be of 3 Years. Following Printed marking on equipment must be required:-

Model No, Capacity, Gross Weight, Content, Fire Rating, Batch No, Serial no, Mfg Month, Refilling Due. [with

necessary numbering / marking with oil paint by painter as instructions given by G.S.P.H.C.L engineer] (Make:

KANEX, MINIMAX, CEASEFIRE)

Providing and fixing of CO2 type High Pressure Portable 4.5 kg Fire Extinguisher, filled with Co2 Gas as per IS 1.00 Each 6526.00 RS: Six Thousand Five

15222, Control discharge mechanism fitted with 1 Meter Wire Braided Hose & Electrical non-conductor Hundred Twenty Six only

Polyethylene Flat Horn with Diffuser Nozzle for dispersed discharge of CO2, Discharge Time 12 Sec, Average

Discharge is 95%, Applicable on Class B, C and electrically started Fire, Fire Rating 55B, Internal coating is not

applicable & External coating is of enamel spray painting, Powder Coated Handle, Valve Confirm to IS 3224 ISI

Marked, CO2 Cylinder construction: hot spinning by seamless pipes & bearing ISI mark, Body confirms to IS

7285 and PESO ( Petroleum and Explosives Safety Organization) APPROVED, Minimum Wall Thickness 4 to

4.2 mm, Extinguishers confirmed to IS 15683:2018 and ISI marked. Referance Weight:-Gross Weight 16.4,

127 empty weight 11.9 Kg, 1. Necessary certificate & and guarantee must be attached, 2. OEM has to provide wall

mounting heavy duty bracket/clamp, screw, hardware for installation. 3.Following printed marking Manufacturing

Date and Expiry Date must be mention on Extinguisher 4. Refilling period must be of 5 Years. Following Printed

marking on equipment must be required:- Model No, Capacity, Gross Weight, Content, Fire Rating, Batch No,

Serial no, Mfg Month, Refilling Due. [with necessary numbering / marking with oil paint by painter as instructions

given by G.S.P.H.C.L engineer] (Make: KANEX, MINIMAX, CEASEFIRE)

Providing open well type horizontal submersible mono block pump set with cast iron body having following 2.00 Each 9518.00 RS: Nine Thousand Five

specification [b] For 1 phase open well horizontal mono block pump set suitable for185 LPM @ 25 mtr head Hundred Eighteen only

suitable for 25/32 mm dia delivery pipe with 10 mtr necessary size 3 core Flat copper flexible cable. (Body: Cast

iron / Winding: Copper / stator: Copper/ roto: Copper/ shaft: SS 304 material test certificate from manufacturer

will be submitted). For 1.0 HP single phase open well pump single/ multi stage as per actual head requirement as

per site situation.

128 The model of the pump with respect to head and discharge will be approved by EIC.

Pump should have following specification.

(1) Minimum 10mtr cu. flat cable of suitable size must be provided with pump.

(2) Pump shall be installed as per manufacturer foundation/ erection drawing or as per IS specification. (3) with

necessary starter as per EIC

(Body full CI, stator winding- copper, rotor- copper, shaft- SS 304, motor-Energy efficiency) Cat-II

Lowering of existing submercible motor pump set complete with required No. and size of pipes by means of 2.00 Each 848.00 RS: Eight Hundred

proper chain pulley block and pipe wrenches. Job includes stacking of pipes chronologically after the checking of Forty Eight only

129 threads. For open well horizontal submercible pump set for sump well. For 1.0 HP to 5.0 HP.

Providing & erecting ISI make medium duty (B class) galvanized MS pipe with coupling, bend, union, reducer, 20.00 Mtr. 175.00 RS: One Hundred

tee, MS flange etc. with plumbing charges. For 32 mm dia Seventy Five only

Supplying and erecting C.I. Swing check type non return (reflux) valve ISI marked with packing, flange, nuts and 3.00 Each 308.00 RS: Three Hundred

bolts etc suitable for following pipe size. For 32mm dia. Eight only

Providing & erecting Two Way Center Off Double Pole MCB Change Over Switch (IS 13947-3/IEC 60947-3) in 1.00 Each 560.00 RS: Five Hundred Sixty

MS Box, for 25 Amps. Cat-III only

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking 2.00 Each 297.00 RS: Two Hundred Ninty

capacity & confirms to IS: 8828 in existing box having following capacity for 6 to 32 Amp. Seven only

Supplying & fixing box for housing RCCB + MCB combination made of 18 SWG sheet steel duly powder coated 3.00 Each 272.00 RS: Two Hundred

with gasket, dust & vermin proof bakelite shield two earthing terminals for following type of RCCB, RCCB + MCB. Seventy Two only

Supplying Water tight M.S. Box of size 20 x 15 x 15 cms. to erect suitable kitkat fuse / MCB to be erected on 2.00 Each 232.00 RS: Two Hundred Thirty

polished wooden board inside the box with hinged/sliding door with rubber rings and erected on pole with suitable Two only

135 pole clamp, all duly painted with one coat of red oxide and two coats of paints. (Cost of Fuse / MCB shall be taken

extra) [Provision for motors cable joints near sump]

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper cable approved 10.00 Mtr. 65.00 RS: Sixty Five only

136 make of following Size. For 3 Core x 1.5 Sq. mm.

Providing water proof straight joint in PVC insulated flat flexible copper cable by using insulated material water 2.00 Each 188.00 RS: One Hundred

137 proofing material and making the joint complete. Up to 10 Sq. mm Eighty Eight only

Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured Copper cable for 1100 volt to be laid 90 cms. 212.00 Mtr. 361.00 RS: Three Hundred

Under ground or to be laid on wall with suitable G.I. heavy guage 1.6mm thick cable clamp or in existing DWC Sixty One only

138 pipe underground or road crossing or floor. For 4 core x 4 sq.mm.

Providing & fixing Double compressed heavy duty flange type brass cable gland with rubber ring for P V C 10.00 Each 43.00 RS: Forty Three

insulated armoured cable complete with outgoing tails, insulating tape etc. For following size cables. For 2 to 4 only

core x 4.0 Sq. mm (Sigma, MCI, Comet, HMI Make Only)

Solderless crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with 100.00 Each 8.00 RS: Eight only

high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved

140 manner. For 1.5/2.5 to 6 Sq.mm Cable

Providing & laying HDPE Double walled corrugated pipes (DWC) (conforming to IS: 16205 (part 24) 2018)) with 50.00 Mtr. 117.00 RS: One Hundred

minimum load required of 450N capacity with anti rodent and ultra violet material properties with necessary Seventeen only

connecting accessories of same material at required depth to be laid 90 cms. under ground for laying of cable

141 below ground / road surface for enclosing cable and back filling the same to make ground as per original. For

Outer dia. 50 mm and Inner dia. 38 mm. ) (Test Certificate to be Submitted)

Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of 225 mm dia in soft soil. Suitable 2.00 Each 7025.00 RS: Seven Thousand

for doing pipe-in-pipe technology earthing.Earthing electric rod must be made from Corrosion free Hot dip Twenty Five only

galvanizing pipes having following specification.

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B ' Class ISI mark of Reputed Brand, Inner pipe:-

42 mm minimum O.D., Pipe B Class ISI mark reputed Brand Terminal Size: 70mm X 100mm length, Terminal

Should be made from inner pipe for that pipe must be pressed and gave rectangular shape so its work as a

terminal.The hot deep galvanising must be done after above process.Galvanised thickness must be minimum

micron any where. SS Nut bolt:- 2 no.with washer suitable for 14mm dia. hole must be provided at terminal. total

142a minimum Weight(approx.) of earth electrodewith inside conductive material minimum should be 26 kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter testing as per IEC 62561-2017, Voltage drop:-

< 1 volt at no load & dry form, Sulphar content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to retain moisture for long time Back Filling

Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of 400 mm X 400 mm X 400 mm depth and Cover

should be heavy duty cast iron with required size of 300 mm X 300 mm X 4 mm thick.

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only] [OEM has to submit all detail &

sample for approved before supplying]

[Water must be poured in bore before starting earthing. Earthing value must be measured with earth tester.

Agency has to bring the earth resistance to at least 02 ohms & voltage between neutral & Earthing upto 02 volt.

Agency has to maintain earthing & its value for one year. Earthing must be done in the presence of A.E.

For above earthing additional charges for boring in hard rock soil (by breaker) & filling soft soil in earth pit 2.00 Nos. 276.00 RS: Two Hundred

(certificate for soil have to given by DEE / AE along with photographs) Seventy Six only

Providing & Erecting Mains with ISI marked, 1.1 KV grade electrolyte multi stranded, annealed copper conductor 15.00 Mtr. 37.00 RS: Thirty Seven

with heat resistant PVC insulated conforms to IS:694, IEC - 227 erected in existing pipe of following size only

(Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of

143a copper lugs, nuts and bolts if required. For One wire 4.00 sq. mm

For One wire 10.00 sq. mm 15.00 Mtr. 91.00 RS: Ninty One

Providing ad erecting approved make single phase Double Door metal clad D.B. as per relevant indian standards 8.00 Each 5868.80 RS: Five Thousand Eight

ammended upto date. Hundred Sixty Eight and

Supplying and fixing following way single phase MCB distrubution board of company fabricated with sheet box Paise Eighty only

with powder coated inside and outside after apply seven tank chemical process of MS sheet cover complete with

suitable integral single piece construction tinned copper busbar and link with all necessary interconnection and

with necessary size MS frame for mounting MCBDB. Manufacturer must be provided (1) IP 43 and as per IS:8623-

1 & 3, IEC 61439-1 & 3 having D type PU gasket. (2) Seven tank Powder coating Certificate (3) Tinned

Copper/Brass make neutral & Earthing link with isolation & Protecting Cover for 240 Volts on surface / recess

complete with loose wire box, terminal connectors for all incoming and outgoing circuits, with suitable size FRLS

144 PVC insulated copper conductor up to terminal blocks and internal connection, tinned coppper bus bar, 1 no.

tinned copper neutral link, tinned copper earth bar, din bar, detachable gland plate, interconnections, powder

painted including earthing etc.

Single phase incoming and horizontal single phase outgoing. For 16 Way MCBDB: Including 40 Amp. 30 mA

double pole ELCB (ELCB confirming to IS:12640/1988 having sensitivity of 30 mA and breaking capacity of

KA), MCB 40 Amp. double pole switch (C curve confirms to IS:8828 having breaking capacity of 10 KA) and S.P.

MCB of rating 6 to 32 Amp. with NL suitable to operate on 240 Volt A.C. power. (6 Amp:- 4 Nos., 16 Amp:- 4 Nos.

& 25 Amp: 4 Nos.) Cat.-III

(The DBs should be used of same company of MCB / ELCB to be used) (MCBDB must be erected in line & level

with spirit level and finish the external edge with box cutting plaster) (Same colour MCB(SP/DP) should be used

as same as MCBDB) [Including Necessary numbering / marking on box done with red colour radium sticker as

per site requirement and instructions given by EIC on site. Font / number size given by EIC on site as per

Providing ad erecting approved make Three phase Double Door Horizontal / Vertical type (as 1.00 Each 3379.00 RS: Three Thousand

per site requirement and EIC instruction) outgoing per phase outgoing type (PPI) metal clad Three Hundred Seventy Nine

D.B. as per relevant Indian standards amended up to date. Supplying and fixing following way only

Three phase MCB distribution board with company wire links for internal connections having

colour code and with suitable lugs and company fabricated IK 10 certificate with sheet box

with powder coated inside and outside after apply seven tank chemical process of MS sheet

cover complete with suitable integral single piece construction, tinned copper busbar and link

with all necessary interconnection and with necessary size GI frame (if required for surface

type) for mounting MCBDB. Manufacturer must be provided (1) IP 43 and as per IS:8623-1 &

3, IEC 61439-1 & 3 having D type PU gasket. (2) Seven tank Powder coating Certificate (3)

Tinned Copper/Brass make neutral & Earthing link with isolation & Protecting Cover for

Volts on surface / recess complete with loose wire box, terminal connectors for all incoming

and outgoing circuits, with suitable size FRLS PVC 10mm2 insulated copper conductor with Pin

type lug up to terminal blocks and internal connection, tinned copper bus bar, 4 nos. tinned

copper neutral link, 4 nos. tinned copper earth bar, din bar-4 nos., detachable gland plate,

interconnections, including earthing etc. Three phase incoming and single phase outgoing.

Total quantity of wire link: 17 Nos. For Three phase 8 Way Double Door PPI MCBDB I/C:- 25Amp FP MCB 10KA,

C-25A DP ELCB, 30a, 10KA - 03nos & O/G:- C-curve 6-32 Amp SP MCB :- 18Nos. (The DBs should be used of

same company of MCB / ELCB to be used) (MCBDB must be erected in line

& level with spirit level and finish the external edge with box cutting plaster) (Same colour

MCB(SP/DP) should be used as same as MCBDB) [Including Necessary numbering / marking

on box done with red colour radium sticker as per site requirement and instructions given by

EIC on site. Font / number size given by EIC on site as per requirement]

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking 12.00 Each 327.00 RS: Three Hundred

146 capacity & confirms to IS : 8828 in existing box having following capacity for 40Amp Twenty Seven only

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity 2.00 Each 730.00 RS: Seven Hundred

& confirms to IS :8828 in existing box having following capacity for 63Amp Thirty only

Supplying & fixing box for housing RCCB + MCB combination made of 18 SWG sheet steel duly powder coated 2.00 Each 442.00 RS: Four Hundred Forty

with gasket, dust & vermin proof bakelite shield two earthing terminals for following type of RCCB, RCCB + MCB Two only

Supplying & erecting M.S./ G.I metal Box having 16 Gauge painted with red oxide be concealed in wall with 190.00 sq inch 5.94 RS: Five and Paise

necessary plastering & finishing covered with 3mm thick Laminated sheet with grooving as directed of following Ninty Four only

149 depth. 3" Depth

Dismantling the existing light, fan, bell, , independent plug point, wiring with mains of all types along with 104.00 point 1.00 RS: One only

150 accessories etc. complete and handed over to dept.

Dismantling the existing ceiling fan / exhaust fan / cabin fan / bracket fan complete with accessories, G.I. down 51.00 point 9.00 RS: Nine only

rod, frame etc. and making the site clear.

Total Electrical Amount

Assistant Engineer (Ele.) Dy. Ex. Engineer (Ele.) Executive Engineer (Ele.)

Ahmedabad Vadodara Gandhinagar