Modification of Room No. 4309 and open space in between room No 4302 and 4303 of NIC Tripura at new secretariat building 3rd floor Block-4 , Kunjaban extension, Agartala under capital complex Sub Division No-II, Under capital complex Division du

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. (i) For thickness of tiles above 25 mm and up to 40 mm

Providing and fixing wall panelling / partion wall by 19 mm thick Green Solid plywood of make Greenply/ Century ply or equivalent as per IS 710 : 2010 and and back will have 19 mm thick 50mm x 19mm plywood in both horizontal and vertical direction at 600mm C/C and 1200mm C/C respectively, completed with all necessary hardware and fittings as per approved drawing, design and direction of the Engineer-in-charge.

Providing and fixing 1mm thick laminate (New Mica) of make Greenply / Century ply or equivalent as per IS 710 : 2010 in wall panelling / partition wall etc. completed with all necessary adhesive, paper strip hardware fitting etc. as per approved drawing design and direction of the Engineer-in-charge.

Providing and fixing wall cabinet of size 2.40m x 1.80m x 0.45m is made of Greenply(Ecotec-710 grade or equivalent) 19mm solid plywood and back will have 12 mm plywood finished with 1 mm thick laminate for outside and inside will be finish in 0.8mm laminate of approved shade completed with all necessary hardware and fittings such as stainless steel butt hings, Magnetic catcher, brass cup board lock, brass handles etc. complete as per approved drawing and direction of the Engineer-in-charge. (Only front side area will be measured)

Providing an fixing L’ shape office workstation table size 4’-6’’ x 6’-0’’ x 2’-6’’ is made of marine grade BWP 19mm thick solid plywood and finished with 1 mm thick laminate for outside and inside will be finish in 0.8 mm laminate of approved shade completed with all necessary hardware and fittings. This table will have 1 no keyboard tray, 1 no CPU trolly and 2 Nos of drawer unit, completed as per approved drawing and direction of the Engineer-in-charge.

i) With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm )

(ii) With float glass panes of 5.5 mm thickness ( weight not less than 13.75 kg / sqm )

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.