Construction of Ministerial Quarter - 1 No. at Balliguda Plinth Area 580sqft

Earth work in excavation of foundation in all kinds of soil with all leads and lifts including dressing & leveling the bed and depositing the excavated earth at place away from work site with all leads and lifts including cost of all labour T&P articles

Filling in foundation and plinth with fine course sand free from organic and materials, well watered and rammed including all cost conveyance, royality taxes and all labour T&P articles required for the work etc. complete as per the specification and dire

Cement concrete of proportion (1:4:8) in foundation and plinth using 4cm size clean hard black hand broken granite metal of approved quality from approved quarry including hoisting lowering & laying concrete in layers not exceeding 9”thick to the required

Fly ash Brick Work in Cement Mortar (1:6) in F&P strength not less than 75 kg / cm 2 including cost of all labour , material etc complete.

R.C.C.work of M-20 in column base and footing and column stem upto plinth level having a minimum comprresive strength (in work test) 150 kg/Cm2 in 15 cm cubes at 28 days after mixing and test conducted in accordance with IS 456 and IS 516 using 12mm size black hard crusher broken granite chips including hoisting,lowering laying and compacting concrete by using vibrator with watering and curing for 28 days centering and shuttering and finishing the exposed surface smooth providing grooves or beds whereever necessay including cost conveyance, royalties and all taxes of all materials and cost of all labour with T&P required for the work etc.complete in all respect but excluding cost of M.S.Rods or Tor Steel and binding wires and labour charge for bending binding and tying the grills etc.complete in all respect as per direction of Engineer-in-charge. 1. RCC Column base and Footing

RCC Plinth Band

Column in Super structure

RCC Beam

RCC Lintel

RCC Chaja

RCC Roof slab

Straightening, bend up or coiled rod, cutting, bending, cranking, hooking welding or jointing (if required) the MS/Tor rod and binding wire, laying the grills and placing in proper position as required for R.C. work providing fan hooks when necessary incl

Fly ash brick work in cement mortar (1:6) after immersing brick for six hours in water before use in superstructure with good quality of brick 23cm x 11 cm x 8 cm size having crushing strength not less than 75Kg. Per Sqm. Including splays cutting circular molding and similar such type of work with necessary projections, chamfering and corbelling watering and curing etc. complete including cost conveyance and Royalty, Cess of all materials with all taxes and all labour with T&P articles required for the work etc. complete as per specification and direction of the Engineer-in-charge.

12mm thick cement plaster in Cement mortar (1:6) to brick work with curing and cost conveyance, royality of all materials and all labour T&P etc. complete as per specification and direction of the Engineer-in-charge.

16mm thick cement plaster in Cement mortar (1:6) to brick work with curing and cost conveyance, royality of all materials and all labour T&P etc. complete as per specification and direction of the Engineer-in-charge.

20mm thick cement plaster in Cement mortar (1:6) over stone work with curing and cost conveyance, royality of all materials and all labour T&P etc. complete as per specification and direction of the Engineer-in-charge.

12mm thick cement plaster in Cement mortar (1:4) to brick work including cement puning and two coat bitumen painting with curing and cost conveyance, royality of all materials and all labour T&P etc. complete as per specification and direction of the Engineer in charge

Supplying, fitting and fixing of Vitrified tile in floors of size 600mm x 600mm of approved make conforming to IS 13755 laid on 20mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour, T&P etc. required for the work all complete as per direction of the Engineer-in-charge (For New work only).

Providing and fixing Vitrified tiles in dados, skirtings and risers of steps on 12 mm thick cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles complete including cost of tiles as directed by the Engineer-in-charge.

Providing and fixing Ceramic tiles in floors, treads or steps and landing on 25 mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles complete including cost of tiles as directed by the Engineer-in-charge.

Providing and fixing Ceramic tiles in dados, skirtings and risers of steps on 12 mm thick cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles complete including cost of tiles as directed by the Engineer-in-charge.

Providing fiting & fixing M.S Door & Windows with Choukath as per approved design including cost of all materials etc complete with all labour T&P articles required for the work etc. complete as per the specification and direction of the Engineer-in-charge

Labour for fitting fixing M.S. Door & Window & G.D. with all cost of labour and T&P etc. complete.

Finishing wall Surface with weather coat with all cost, covneyance etc. complete.

Painting two coat over a coat of Priming with any approved paint to doors, windows iron works including all labour T&P articles required for the work etc complete as per the specification and direction of the E.I.C.

Providing distempering two coats to wall surface over a coat of cement primer to wall surface with any approved of approved shade including cost of distemper etc. Conveyence, taxes of all materials and labour T&P etc complete in all respect as per speci

Please Enable Macros to View BoQ information