SPECIAL REPAIR TO BLDG NO T 27 (WKSP) FOR AD REGT WKSP UNDER AGE (I) NABAGRAM AT NABAGRAM MILITARY STATION

Taking down cement plaster on stone masonry RCC surfaces, dado surfaces etc complete incl racking out joints, hacking for key scrubbing down with water, complete all as specified and directed.

Materia and labour for 15mm thick rendering in CM 1:6 on stone masonry finished even and smooth without using extra cement complete, all as specified and directed.

Materia and labour for 15mm thick rendering in CM 1:6 on stone masonry finished even and smooth without using extra cement all as specified.

Materia and labour for preparation of old plastered surfaces of walls and applying two coats of oil bound distemper including 2 coat of wall care putty all as directed by Engr -in- charge.

Hacking out old broken glass (any thickness , size , quality or description ) from metal frame incld punching or drilling out old glazing pins /spring clips and provding and fixing new ones.

S/F for 3 mm thick plain sheet glass ordinary quality & glazing with oil putty in square n exc 0.50sqm in each pane.

M&L for Fibre glass reinforced translucent corrugated sheeting 2mm thick with two corrugations side lap roof covering fixed with J or L hooks and incl demolation of old sheets complete all as directed.

Material & labour for box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame (single rebated ) of ERW and FI 2 mm thick welded /screwed to frame for fixinging of sheet glass including fixtures and fittings like a stopper , cleat , pintal hinges , holdfast etc all as shown on drg No CEJZ/TD/1019/08 sheet 1/3 to 3/3 dt 01 May 2008 complete all as specified. (a) 10 mm Sq Guard bar 10 cm C/C (b) One shop coat of red oxide and two coats of synthetic enamel paint to MS ventilator and gaurd bar (c) MS Tower bolt 150m Material and labour forong - 2 No per leaf (d) Z Sec 20mm x 25 mm, 100 mMaterial and labour forong stopper - 1 No per leaf Note: (i) Including taking down old steel ventilator and making good dismantled portion with PCC 1:2:4 type B0 including hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing, complete all as specified and directed. (ii) sheet glass and wire mesh shall be measured and paid separately)

Plain, galvanised, mild steel sheeting .63 mm, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275

M&L for mild steel frame work in trusses purlins, posts etc complete using MS angle iron, MS Hollow Square or rectangular sections,flat irons etc complete incl necessary welding cutting to shape & hoisted & fixed in position complete all as directed & specified .