Spl repair to various OTM bldgs at AFS Mandore, Provn of parking shed near bldg No P-312 at AFS Jodhpur and Addn Alteration to existing washroom to cater for ladies toilets and changing room at 5 ASC at AFS Jodhpur

Amount

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles concrete articles complete all as specified and directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in setting in mortar, CM 1:6 complete all as specified and directed.

Taking down chowkats or frames exe 1.5 Sqm but n.exc 4 sqm each with shutter (without taking off shutters from the frame) and removing from site complete all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each or as directed by Engineer-in-Charge.

S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, fixing in opening as per specification and drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, and fixing in the frame at site as per specification & drawing.

S&F 200 mm long aluminium, anodized, barrel tower bolts of extruded section and fixed as directed by Engineer-in-Charge.

S&F 300 mm long a mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia welded with iron door directed by Engineer-in-Charge.

S&F for 100 mm long butt hinges, medium weight stainless steel as directed by Engineer-in-Charge.

S&F aluminium handles, cast type, anodized, of size 150mm as directed by Engineer-in-Charge.

S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580 mm x 440 mm, white with integral foot rests, including PVC 'P' trap, embedded and set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish.

S&F in repairs, EWC vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs PVC valve less, symphonic action type, flushing cistern, low level, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets.

S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long.

M & L for dismantling water tanks of 500 liters capacity and removing to store complete all as specified and directed.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight of ball valve - 210 gms)

Taking up or down steel tubing 15 mm bore and connections including cleaning for re-fixing or removing from site.

Supply and laying 15mm bore tubes, galvanized steel, medium grade, with all fittings and fixed complete on walls and ceilings or laid in floors all as specified and directed.

S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length, 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified.

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm.

S&F in repairs PVC waste pipe of 32 mm bore of suitable length for WHB/urinal/sink, complete all as specified.

S&F in repairs grating doom 125 mm dia with / without waste hole of PTMT (min wt 40 gms).

S&F in repairs 15 mm bore bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule as directed by Engineer-in-Charge.

S&F in repairs, 15 mm bore stop valve, fancy type, chromium plated with long shank and cup , screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions as directed by Engineer-in-Charge.

S&F in repairs 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete.

S&F in repairs, 15 mm bore stop valve, concealed type type, chromium plated with long shank and cup, screwed down, high pressure with handle, screwed both ends for iron pipe or for unions as directed by Engineer-in-Charge.

S&F in repairs 20 mm dia gun metal globe or gate valve with iron wheel head screwed both ends for iron pipes as directed by Engineer-in-Charge.

S&F in repair brass chromium plated shower rose of 125 mm size with swivel joint including fixing to steel pipe or union as directed by Engineer-in-Charge.

S&F in repairs brass chromium plated health faucet of 15 mm bore complete as directed by Engineer-in-Charge.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges.

S&F in repairs stainless steel soap dish made of stainless steel 1.00mm thick, approximate 150x150 mm fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs 15 mm bore brass chromium plated bib cock two in one with angle cock including fixing to steel pipe or union.

S&F in repairs stainless steel toilet paper holder fixed to walls with chromium plastered (CP) brass screws all as directed by Engr-in-charge.

Taking up or down steel tubing 20 mm bore and connections including cleaning for re-fixing or removing from site.

Supply and laying 20 mm bore tubes, galvanized steel, medium grade, with all fittings and fixed complete on walls and ceilings or laid in floors all as specified and directed.

S&F PVC (SWR) gully traps of size 125/110 mm, setting and jointing with solvent cement and complete and as directed by Engineer-in-Charge.

Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks, etc., including cleaning or re-fixing or removal from site all as specified and directed. (measured overall as fixed along the centre line over fittings and accessories).

S&F in repair for PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints laid in trenches or in floors as directed by Engineer-in-Charge.

S&F in repair for PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints laid in trenches or in floors as directed by Engineer-in-Charge.

S&F in repair for PVC (SWR), junction single, (Single T) with door 110 mm dia equal or unequal as directed by Engineer-in-Charge.

S&F in repair for PVC (SWR), junction single, (Single T) with door 75 mm dia as directed by Engineer-in-Charge.

S&F in repair for PVC (SWR) door bends 110 mm dia as directed by Engineer-in-Charge.

S&F in repair for PVC (SWR) door bends 75 mm dia as directed by Engineer-in-Charge.

S&F in repair for PVC (SWR) Cowl 110 mm dia as directed by Engineer-in-Charge.

S&F in repair for PVC (SWR), 75mm dia of floor trap, with grating including jointing wit solvent cement and complete and as directed by Engineer-in-Charge.

M & L PCC Type B1,1:2:4(20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing from site and rubbish off the premises.

M & L PCC 25 mm thick type B-0, 1:2:4 (12.5mm graded aggregate) as base complete all as specified.

M&L for joint free non-skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 all as specified and directed.

M&L for glazed ceramic tiles, coloured of size 450x350x7mm thick on vertical surfaces such as skirting, wall, dados and risers to steps etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces all as specified and directed.

M&L for light coloured vitrified ceramic tiles 10 mm thick area of each tiles not less than 0.36 sqm in floors etc., set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in CM 1;6 as directed by Engineer-in-Charge.

All as per item no.52 above but on vertical surfaces such as dados skirting and risers to step set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4 on stone masonry surfaces as directed by Engineer-in-Charge.

M&L for joint free antiskid vitrified parking tiles, coloured, 7 to 8 mm thick in floors etc., area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on stone masonry surfaces finished even and smooth without using extra cement as directed by Engineer-in-Charge.

M&L for rendering 15 mm thick in CM 1:6 on stone masonry surfaces finished even and smooth without using extra cement as directed by Engineer-in-Charge.

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment tomatch the shade of granite stone including grinding and polishing complete.

M&L 75 mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection finished surface even and fair without using extra cement all as specified and as directed by Engineer-in-Charge.

Excavating in trenches in soft disintegrated rock, n. exc. 1.5m wide and n. exc 1.5 in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc., n. exc. 10 sqm on plan and n. exc 1.5m in depth and getting out.

M&L for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in bed to drain pipes of size 100 mm bore, including packing under & hunching against the sides of pipes after they are laid and tested.

M&L for preparation of new decorated plastered or un-plastered surfaces of walls applying one coat of cement base paint, white or tinted, all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old decorated plastered or un-plastered surfaces of walls applying one coat of cement base paint, white or tinted, all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint as directed by Engineer-in-Charge.

M&L for preparation of new painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint over one coat of primer as directed by Engineer-in-Charge.

M&L for preparation of new plastered or un-plastered surfaces of walls and applying one coat of primer, 1 mm wall putty & sanding on plastered surfaces preparatory to distempering and applying two coat of oil emulsion distemper white or tinted by pump roller applicator as directed as directed by Engineer-in-Charge.

M&L for complete removal of old treatment by mechanical means from walls and applying one coat of primer, 1 mm wall putty & sanding on plastered surfaces preparatory to distempering and applying two coat of oil emulsion distemper white or tinted by pump roller applicator as directed as directed by Engineer-in-Charge.

M&L for preparation of old painted wooden surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint as directed by Engineer-in-Charge.

M&L for preparation of old plastered or un-plastered surfaces of ceiling and applying one coat of white wash as directed by Engineer-in-Charge.

M&L for preparation of old ceiling surface applying two coat of oil emulsion distemper white or tinted by pump roller applicator or manual as directed by Engineer-in-Charge.

M&L for preparation of new ceiling surface applying two coat of oil emulsion distemper white or tinted by pump roller applicator or manual as directed by Engineer-in-Charge

M & L as in repair providing and fixing 10 mm thick plaster of pairs ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh.

M&L for providing cement concrete 100 mm thick type D-2, 1:4:8 in foundations, filling and mass concrete as base surface and complete all as specified.

M & L 50 mm cement concrete type B-1, 1:2:4 (20mm graded aggregate) as surface course.

Demolition of cement concrete (un-reinforced) roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work removing from site all as specified and directed.

Demolition of cement concrete (un-reinforced) concrete of any description and in any position not otherwise specifically provided for complete all as specified.

M&L for 50 mm thick (average) cement concrete 1:2:4 type B-1 mix (20 mm graded stone aggregate) in padding over roof.

M&L for 10 mm thick rendering in CM 1:3 over concrete surfaces (Roof) mixed with water proofing compound @ 3% by weight of cement complete all as specified. NOTE : Water proofing compound shall be measured and paid for separately as “Supply only”

Supply only integral water proofing compound ISI marked.

M&L for APP based polymeric membrane minimumweighing 3kg/sqm and minimum 3mm thickreinforced with polyester non wove fabric (wt. notless than 150 gms/sqm) land on primed surface laid by torch application method with overlaps 100 mm on length side and 100 mm on the width side as per manufacturer’s instructions over and including a coat of approved cold applied bituminous oil based primer (IS- 3384) @ 0.5 ltr/sqm over cleaned roof surface complete all as specified and as directed by Engineer-in-Charge.

S & F Pre- painted galvanized aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws as specified.

S & F Purlins, crane gantries, roof trusses (framed), rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections),cooler stand including distance pieces, cleats etc. confirming Fe- 290 (Gde E- 165) complete all as specified.

S & F anodised aluminium frame section for ventilator with one or more rebates including joining cleat for fixing and including all necessary fitting and fixes complete all as specified.

S & F 3mm figured glass, any type and glazing fix with rubber beading and aluminium strip n exc 0.5 sqm in each complete all as specified and directed.

S&F louvers of aluminium with including arrangement of fixing glass pinhead as per size 400 mmX40 mmX15 mm & louvers ventilator (Glass shall be measurement separately) complete all as specified and as directed.

S&F in repair galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanised wire staples as directed by Engineer-in-Charge.

M&L for hacking out old broken glass (any thickness, size, quality or description) from metal frame glazed with putty including punching or drilling out old glazing pin/spring, clips and providing new ones as directed by Engineer-in-Charge.

S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden beads supplied with shutters in square n. exc. 0.5 sqm in each pane as directed by Engineer-in-Charge.

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering, and removing surplus soil to a distance not exc 50 m and making good surface in hard/dense soil complete all as specified & as directed.

M&L for PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate in foundations, filling and mass concrete.

M&L for steel work in tubular, post, trusses, purlin rafters including special shaped washers etc complete using ERW or induction butt welded tube confirming to IS 1161 1979 grade St-249 complete all as specified & directed.

M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide zinc chrome primer complete all as specified.

Demolition of cement concrete in ground floor and paving n exe 15 cm thickness (below or above ground level) complete all as specified & as directed.

M&L for brick work with old size Fly Ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6 complete all as specified and as directed.

M&L for rendering 10mm thick in cement mortar 1:4 on any face of brick masonry or concrete surfaces of walls, with rough surface to received neat slurry for tile complete all as specified.

M&L for rendering 10mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.

M&L coloured non-skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., set and joined in neat cement slurry and pointed in white or coloured cement to match over screed layer of 15mm in CM 1:6 complete.

M&L for coloured glazed ceramic tiles in vertical surface 350x350x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in colour cement to match the surface complete all as specified and as directed.

Material and labour PCC (1:4:8) type D2, using 40mm graded stone aggregate as in filling & mass concrete, finishing the top surface of concrete even and rough to receive topping layer complete all as specified and directed.

S&F Factory made with particle board core solid PVC moulded door shutter 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified.

S&F vitreous China wash down water closet pan (pedestal pattern) white, with flush pipe, 10 Ltr PVC valve-less, symphonic action type, low level flushing cistern white, with inlet, ball valve, float including brackets and connections incl P-trap and PVC connection of 450mm long fixed complete all as specified.

S&F vitreous China squatting pan, Orissa Pattern, Size 580x440 mm white, with integral foot rests (with flush pipe, 10 Ltr PVC valveless, symphonic action type, low level flushing cistern white, with inlet, ball valve, float including brackets and connections) including P trap with PVC connection 15mm 450mm long complete all as specified.

S&F health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe 1.25 meter long flexible tube & ABS all hook incl making connections and fixed position complete all as specified & directed.

S&F vitreous china wash basin, white, flat back, size 450x350mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/ fittings 32mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length, complete all as specified.

S&F 15mm bore stop cock/ angle cock, fancy type, chromium plated half turn complete all as specified and directed by Engr-in-Charge.

S&F 15mm bore bib cock long body fancy type with crutch of butterfly handle cast copper alloy, chromium plated, screwed down, screwed for iron pipe or for brass ferrule.

S&F 15mm bore bib cock long body fancy type with crutch of butterfly handle cast copper alloy, chromium plated, 2 in 1 screwed down, screwed for iron pipe of for brass ferrule

S&F fancy type CP pillar taps, cast copper alloy, with capstan heads chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘cold’ with long screwed shanks and fly nuts screwed for iron pipe and fixed of 15mm bore.

M&L 125mm brass chromium plated shower with all fittings and fixed complete all as specified.

S&F sheet glass shelf 60cm (with brass brackets) consisting of 5.5mm thick sheet glass with chromium plated bracket guard and railing.

S&F SS grating with or without waste hole make approved by Engr-in-Charge.

S&F stainless steel soap dish made of stainless steel 1.00mm thick, approximate 150x150mm fixed to plugs with chromium plated brass screws approved by Engr-in-Charge.

S&F towel rail 600mm long of SS fixed with and including Chromium plated brass screws and wooden/ plastic cleats approved by Engr-in-Charge.

M&L for preparation of new plaster surfaces of wall, applying two coat of oil bond distemper over a coat of primer with alkali resistant priming paint with one coat of wall care putty complete all as specified.

M&L 75mm PVC floor trap with grating including jointing to waste pipe with solvent cement fixed in cement fixed in cement concrete complete all as specified.

S&F PVC (SWR) T junction 75mm bore pipes complete all as specified.

S&F PVC (SWR) T junction 110mm bore pipes complete all as specified.

S&F PVC (SWR) branch piece junction 75mm bore pipes complete all as specified.

S&F PVC (SWR) branch piece junction 110mm bore pipes complete all as specified.

S&F PVC (SWR) vent cowl 110mm bore pipes complete all as specified.

S&F PVC (SWR) reducer 75 to 110mm bore pipes complete all as specified.

S&F PVC gully traps of size 125/110mm, square or rounded mouthed type ‘P’ fixed in CM 1:6 and cover with RCC cover slab of size 200x200x50mm incl necessary excavation, PCC etc.,

S&F 75mm bore PVC (SWR) single socket pipes in any length with rubber ring joint laid in trenches or in floors complete all as specified.

All as per Sl Item No. 124.00 here-in-above, but 110mm bore.

Taking down copper/aluminium point wiring for (light, fan, bell, socket power socket etc.,)complete including fixture and fittings such as switches, sockets lamp holder bracket light fittings tube light fittings, regulators, ceiling rose , mirror light fitting , ceiling light fitting, fancy light fitting , fall ceiling light fitting bell/ buzzer and removing materials to store for keeping in safe custody or for taking credit ( credit for above items should be made as per condition separately) and making good disturbed surfaces of wall floor etc., complete all as specified & as directed.

M&L Point wiring complete with 1.5 Sqmm single core multi standard copper conductor PVC FLRS insulated unsheathed cable in and incl PVC casing capping / PVC Conduit/PVC Conduit concealed (as per site requirement) with accessories existing pressed steel terminal boxes (sunk in wall) including new 3.00 mm thick plastic laminated sheet top cover with 1.50 Sqmm insulated unsheathed PVC covered copper conductor for common earth and connecting to earth dolly for followings items :- Note- M& L for channel/grooves cutting upto a depth of 2.5 cm and width not exc 15 cm into brick/concrete/stone masonry walls, with or without reinforcement and trimming surface as required including concealing PVC conduit 20/25 mm dia with required accessories (like junction boxes/bends etc.,) and plastering 1:4 CM, applying two coats of approved quality white putty for making good and smooth finish to match with existing specifications of wall surface all as specified and as directed by Engr in charge.

One light point controlled by one one way switch.

One fan point/Ex fan point controlled by one one way switch.

One socket out let 5 Amps on the same board.

One socket out 3 pin 5 Amps on the independent board.

All as per item No 127.00 above but with 2.5 Sq mm single core multi standard copper conductor cable for 6 pin 15 Amps socket out let on independent board.

S&F switch flush type 5 Amp, 240 V single pole one way ISI Marked.

S & F Socket outlet 3 pin, 6A, flush type complete.

S&F switch socket combination 2 in 1.5 Amps flush type.

S&F switch socket combination outlet 6 pin ,6/16 Amps flush type.

S&F ceiling rose, 3 Terminal Point/PVC/polycarbonate, isolated body.

S&F fan electronic regulator 300w step type all as specified and as directed by Engr-in-Charge.

Taking down old U/S distribution boards /matel enclosure complete and removing materials to store for keeping in safe custody or for taking credit.

S & F sheet metal enclosures distribution board where MCB to be used with 200 Amps rated bus bar CL-IP-43 240 V, 8 way single pole & neutral link etc., complete all as specified & directed.

S & F sheet metal enclosures distribution board where MCB to be used with 200 Amps rated bus bar CL-IP-43 415 V, 4 way Triple pole & neutral link etc., complete all as specified & directed.

S & F sheet metal enclosures distribution board where MCB to be used with 200 Amps rated bus bar CL-IP-43 240 V, 4 way single pole & neutral link etc., complete all as specified & directed.

S&F sheet metal enclosure with a two pin and earth plug socket complete including with 25 Amps MCB Single pole 240 Volt AC.

Taking down old u/s MCB's complete of any size& make.

M&L for MCB single pole 6-32 Amps, 240 V.

M&L for MCB single pole & neutral 32 to 63 Amps, 240 V.

M&L for MCB triple pole & neutral 63 Amps, 240 V.

Taking down of old u/s light fitting complete of any type all as specified.

S&F LED Tube lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F and testing of energy efficient LED street light fitting of 60 watt comprising a diecast aluminium housing with heat resistant toughened glass with frame IP 66 protection complete all as specified and as directed.

S&F LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

Taking down existing sub main wiring in casing capping/conduit pipe of any size complete.

S&F sub main wiring with 2 run of 6 Sq mm single core copper conductor cable drawn through in rigid PVC conduit ISI marked with fitting and 6.0 Sq mm single core copper conductor cable for continues earth wire all as directed.

Taking out defective LTUG cable XLPE/PVC sheathed 1100 volt grade heavy duty armoured with aluminium conductor from trenches, shifting serviceable cable 2 core 10 sqmm for relaying or taking the unserviceable cable as credit complete all as specified and directed.

Supplying, Laying, Jointing and testing of underground cable XLPE insulated, 1100 volt grade heavy duty armoured with stranded aluminium conductor 2 core 10 sqmm laid in trenches/ duct/ pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and directed by Engr-in-Charge.

S & F double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall confirming to ISI 14930 (Part I and II) for protection of underground cable .Outer dia of pipe 50 mm with all fitting laid in trenches/road/nallah or fixed along wall ,poles or laid under floor (including cutting floor /Road and making good to match with existing adjoining surface etc for cable protection all as specified and as directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregates as in foundation of poles etc., filling and mess concrete complete all as specified.

S&F in replacement single core PVC insulated FR cable with multi stranded copper conductor 1.5 sq mm cross sectional area 3 core ,1100 volts grade all as specified and as directed.

S & F in replacement GI Bracket for mounting street light fittings made out of light grade 32mm GI pipe and have angle of 120 degree incl fixing arrangement complete all as specified and as directed by engr-in-charge.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed.

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc., complete all as specified & as directed.

M & L Cutting in position and providing Tee 25x15mm screwing the existing GI tubing for addn/altns of size 25 mm dia complete all as specified and as directed.

S&F Bib taps brass chromium plated with crutch or butterfly handle complete all as specified and as directed.

S&F Valve stop screwed supplied and installed complete for size 15 mm dia. complete all as specified and as directed.

S&F in replacement tubes Medium grade galvanised with all fittings as Tees, bends, etc laid in trenches of size 25 mm bore complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F gate valves gun metal with iron wheel high pressure screwed both ends for iron pipe or for union and fixed or following size 25 mm dia complete all as specified and as directed.

Vivek Gaur

M/S MAJISA CONSTRUCTIONS