SPECIAL REPAIRS REPLACEMENT OF UNSERVICEABLE LT UG CABLES AND LT PANELS/ FEEDER PILLAR BOX AND OTHER CONNECTED WORKS AT NAVAL BASE KOCHI

Amount

Supply and Lay in replacement UG cable in trenches/passing through pipes/fixed on walls or poles cable XLPE insulated ,screened,PVC bedded,steel strip or wire armoured electric power cables(Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 4 core 10 Sqmm with suitable cable glands including taking down of old one all as specified and as directed.

Supply and Lay in replacement UG cable in trenches/passing through pipes/fixed on walls or poles cable XLPE insulated ,screened,PVC bedded,steel strip or wire armoured electric power cables(Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 4 core 16 Sqmm with suitable cable glands including taking down of old one all as specified and as directed.

Supply and Lay in replacement UG cable in trenches/passing through pipes/fixed on walls or poles cable XLPE insulated ,screened,PVC bedded,steel strip or wire armoured electric power cables(Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 4 core 25 Sqmm sqmm with suitable cable glands including taking down of old one all as specified and as directed.

Supply and Lay in replacement UG cable in trenches/passing through pipes/fixed on walls or poles cable XLPE insulated ,screened,PVC bedded,steel strip or wire armoured electric power cables(Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 3.5 core 35 sqmm with suitable cable glands including taking down of old one all as specified and as directed.

Supply and Lay in replacement UG cable in trenches/passing through pipes/fixed on walls or poles cable XLPE insulated ,screened,PVC bedded,steel strip or wire armoured electric power cables(Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 3.5 core 50 sqmm with suitable cable glands including taking down of old one all as specified and as directed.

Supply and Lay in replacement UG cable in trenches/passing through pipes/fixed on walls or poles cable XLPE insulated ,screened,PVC bedded,steel strip or wire armoured electric power cables(Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 3.5 core 70 Sqmm with suitable cable glands including taking down of old one all as specified and as directed.

Supply and Lay in replacement UG cable in trenches/passing through pipes/fixed on walls or poles cable XLPE insulated ,screened,PVC bedded,steel strip or wire armoured electric power cables(Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 3.5 core 95 sqmm with suitable cable glands including taking down of old one all as specified and as directed.

Supply and Lay in replacement UG cable in trenches/passing through pipes/fixed on walls or poles cable XLPE insulated ,screened,PVC bedded,steel strip or wire armoured electric power cables(Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 3.5 core 120 Sqmm with suitable cable glands including taking down of old one all as specified and as directed.

Supply and Lay in replacement UG cable in trenches/passing through pipes/fixed on walls or poles cable XLPE insulated ,screened,PVC bedded,steel strip or wire armoured electric power cables(Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 3.5 core 150 Sqmm with suitable cable glands including taking down of old one all as specified and as directed.

Supply and Lay in replacement UG cable in trenches/passing through pipes/fixed on walls or poles cable XLPE insulated ,screened,PVC bedded,steel strip or wire armoured electric power cables(Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 3.5 core 185 Sqmm with suitable cable glands including taking down of old one all as specified and as directed.

Supply and Lay in replacement UG cable in trenches/passing through pipes/fixed on walls or poles cable XLPE insulated ,screened,PVC bedded,steel strip or wire armoured electric power cables(Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 3.5 core 240 Sqmm with suitable cable glands including taking down of old one all as specified and as directed.

Supply and Lay in replacement UG cable in trenches/passing through pipes/fixed on walls or poles cable XLPE insulated ,screened,PVC bedded,steel strip or wire armoured electric power cables(Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 3.5 core 300 Sqmm with suitable cable glands including taking down of old one all as specified and as directed.

M&L for earthing complete with galvanized iron earth plate electrode 600 mm x600mm x6 mm thick,buried directly and preferably vertically in ground,earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connected with galvanized iron strip of size 32x6mm by means of nuts,bolts,check nuts and washers made of galvanized iron or steel earthing lead to be protected by GI pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightning arrestor or main controlling switch as directed including providing funnel with 20 mm bore GI pipe (light grade),wire mesh,charcoal or coke and common salt in alternate layer of 15 cm (compacted thickness) all around the earth electrode,concrete earth pits in PCC(1:3:6) type C-1(with 20 mm graded aggregate) 50mm thick precast RCC (1:2:4) cover slab(reinforced with 8 mm dia TMT bar at 15 cm C/C both ways and suitable handle made of 10 mm dia including necessary earth work in excavation,returning filling and removal of surplus earth upto a distance not exceeding 50 mtrs etc all as shown on electrical plate No-3 of MES Schedule Part-I complete including testing on completion all as specified including taking down of old item and as directed by the Engr-in-Charge. NOTE:- (i) Cost of GI pipe medium grade 40 mm shall deemed to be included in the quoted rate. (ii) GI strip and GI pipe length of upto 7.5 RM shall deemed to be included in the quoted rate .

M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in GI pipe40 mm or fixed with poles or any other indicated situation for loop earthing etc as required using galvanised iron strip of size 32 x 6 mm complete all as directed

Excavation in trenches ,in any type of soil not exceeding 1.5m wide or 10 sqm on plane and not exceeding 1.5 m in depth for foundation,pole,shafts,cesspits,manholes,pier holes,laying of UG cables etc and getting out in any type of soil complete all as specified and directed.

Returning,filling in excavated approved soil,including spreading,levelling,watering and well ramming in layers not exceeding 25 cm complete all as specified.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

M&L for riddled soil in trenches and cable ducts including spreading and levelling for cushioning of underground cables all as specified and directed. Note:- Punned thickness shall only be measured and paid.

Supply and laying un-reinforced precast concrete cable cover class LV,type-1,flat of size 250 mm x150mmx40mm for cable protection,conforming to IS: 5820-1970 and having maximum average load breaking strength 200 kg/sqcm complete all as specified. Note:- The sample of precast concrete cable will be got tested from govt approved lab as directed by Engr-in-Charge and cost of testing is deemed to be included in unit rate of this item.

Supply and fixing,cable straight through jointing kit for 1.1 KV (earhed) grade cable,heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 16 to 50 Sq mm including taking down old item,all as specified.

Supply and fixing,cable straight through jointing kit for 1.1 KV (earhed) grade cable,heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 70 to 95 Sq mm including taking down old item,all as specified.

Supply and fixing,cable straight through jointing kit for 1.1 KV (earhed) grade cable,heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 120 to 150 Sq mm including taking down old item,all as specified.

Supply and fixing,cable straight through jointing kit for 1.1 KV (earhed) grade cable,heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 185 to 240 Sq mm including taking down old item,all as specified.

Supply and fixing,cable straight through jointing kit for 1.1 KV (earhed) grade cable,heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 300 to 400 Sq mm including taking down old item,all as specified.

Supply,installation,testing and commissioning in replacement of factory made type,dust and vermin proof totally enclosed LT feeder Pillar box outdoor type CPRI approved fully comparted type,fabricated out of 3 mm thick CRCA sheet,duly painted with epoxy powder coating with 10 tank process,with IP-65 protection complete with provn of front double door shutter with locking arrangement mounted on MS angle iron frame of size 50x50x5 mm and legs grouted on PCC foundation, above 50 cm from PCC foundation,duly powder coated paint over one coat of red oxide primer ,including taking down of old existing feeder pillar box complete all as specified and directed comprising of the following:- i) Aluminium Bus bar TPN 250 Amp of suitable length and section covered with coloured heat shrinkable anti track insulation tape of finished thickness not more than 1 mm and fixed on epoxy base post insulator of both dia and height - 01 set with following specifications:- ii) MCCB 4P,125 Amp ,Ics 35 kA,415V,50 Hz - 01 No (Incomer) iii) MCCB,4P,63 Amp,Ics 25 kA 415V,50 Hz- 3 Nos ( Outgoing) iv) Danger notice plate riveted on the outer body 440 volt v) RYB indications ( LED Type) - 1 Set vi) Multifunctional meter digital compatible to measure voltagecurrent,PF,frequency with 3 lines display LCD in 96x96 sqmm flush mounted case,accuracy class 1.0 - 01 No Loc:- Sailors Married Accommodation Area & Store House No-31(MOK)

Supply ,Install,testing and commissioning in replacement of outdoor pedestal type LT Panel CPRI approved suitable for 415 volts, 3 phase 4 wire 50 Hz AC supply system conforming to IS:8623/93,floor mounted factory made,weather and vermin proof ,fully ventilated and fabricated out of angle iron 40x40x6 mm thick frame work and CRCA sheet 3 mm thick having Aluminium bus bar of rating 315 Amps,three phase and one neutral fixed on insulator and bus bar insulated by coloured heat shrinkable sleeves. The size of the outer shell should not less than 750mm x 500mm x500 mm,mounted on angle iron stand made out of size 40mm x40mm 6mm grouted above 50 cm from PCC foundation,of digital voltmeter & Amps meter with CTs including dismantling and removing the old existing panel complete all as specified and directed:- (a) Bus Bar chamber of 3 phase and 1 neutral 4 strip 415 volts with 315 Amps aluminium strip - 01 set (b) MCCB 200 Amps 35 kA 4 Pole - 01 No (Incoming) (C) MCCB 100 Amps 25 kA 4 Pole - 01 No ( Outgoing) (d) MCCB 63 Amps 25 kA 4 pole - 03 Nos ( Outgoing) (e) RYB indications ( LED Type) - 1 Set (e) Multifunctional meter digital compatible to measure voltagecurrent,PF,frequency with 3 lines display LCD in 96x96 sqmm flush mounted case,accuracy class 1.0 - 01 No (f) Danger notice plate riveted in the outer body 440 volt. Loc:- For Pump House near Golf Course Kataribagh & Ashok No-05

Supply,Install,testing and commissioning in replacement of LT Panel outdoor type ,powder coated dust, vermin and weather proof outdoor,cubical type CPRI approved ,outer shell made out of 3.00 mm thick CRCA Sheet factory fabricated,roof canopy,with front and back openable double door system lockable/openable by keys from both sides having chromium plated 19 mm dia fancy keys,louvers & air vents gasket for natural flow of air. Suitable gasket shall be used to make the outer shell completely vermin proof. The Panel mounting base frame is made of M.S. angle iron of size 50x50x5 mm and the legs are grouted on PCC foundation above 50 cm from PCC foundation .The bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands.The inner shell be made out of 2.0 mm thick CRCA sheet duly compartmentalised for each control gear with louvers and air vent gasket for natural flow of air and suitable provision to accomodate incomer/outgoing MCCB's/MCBs and metering devices and suitable bus bar chamber for passing and connecting UG cables.Providing bus bar for phases and neutral and shall be insulated with colour code heat shrinkable sleeves and shall be mounted on suitable size'F' class insulators made on non hygroscopic,non combustile track resistant,high strength FRP/SMC/DMC material at an interval of not more than 300 through out the length of the TPN bus bar including dismantling and removing the old US LT Panel all as specified and directed by the Engr-in-Charge. Aluminium bus bar TPN 600 Amp of suitable length and section covered with coloured heat shrinkable anti track insulation tape of finished thickness not more than 1 mm and fixed on epoxy base post insulator of both dia and height not less than 40 mm - 01 set (a) MCCB 400 Amp FP 35 KA - 01 No (Incoming) (b) MCCB 200 Amps FP 25 KA - 02 ( Outgoing) (C)MCCB 125 Amp FP 25 KA - 02 Nos ( outgoing) (d) RYB indications ( LED Type) - 1 Set (e) CT's- 400/5A,CL-1,15 VA - 01 Set (f) Multifunctional meter digital compatible to measure voltagecurrent,PF,frequency with 3 lines display LCD in 96x96 sqmm flush mounted case,accuracy class 1.0 - 01 No (g) Danger notice plate riveted in the outer body 440 volt. Loc: Near Naval Aircraft Yard Sub Stn

Cutting existing concrete/metal/bituminous road/PCC hard standing or tile walk way any type n.exc 45 cm width and n.exc 30 cm in depth in hard strata and making good disturbed surfaces as per existing with PCC(1:4:8) type D2 using 40 mm graded stone aggregate 150mm thick over retuning filling,watering,ramming in layers,disposal of surplus material to a distance n.exc 50 m complete for passing of cables all as specified and directed.

M&L for underground pneumatic horizontal drilling of holes upto 150mm dia under road,rail,pavement,hard standing by trenchless technology using ultra sound tecnique including HDPE pipe of 150mm dia suitable for 0.4 mpa working pressure all as specified all as directed by Engr-in-Charge.

Supply and fix in replacement Danger notice plate of 1.6mm thick mild steel sheet,vitreous enamelled white with letters,figures and conventional skull and bones in signal red colour and fixed with M.S.clamps,bolts and nuts of approved size,for LT 20x15 cm complete all as specified.

Supply and laying of 100 mm bore High density polyethylene pipes(HDPE) PN 10 laid in trenches/wall/road crossing for suitable length as per site requirement including taking down old unservicable HDPE/GI pipes all as specified and directed.

Same as per Item No 31 but of size 150 mm bore all as specified and directed.

Same as per Item No 31 but of size 75 mm bore all as specified and directed.

Same as per Item No 31 but of size 65 mm bore all as specified and directed.

Supply and fixing in replacement 40 mm bore light grade GI with all fittings laid in trenches or walls or for passing earth strip etc complete including taking down old item all as specified.

S&F cable route indicator over the LT cables made out of cast iron block of size 15 x 10 cm and thickness 10mm fixed with MS strip of size 32 x4 mm upto length 75mm and marked with words 'LT cable' and size of the LT cable including PCC and earth work complete all as directed .

Supply,Install,testing and commissioning in replacement of LT Panel outdoor type ,powder coated dust, vermin and weather proof outdoor typr CPRI approved ,cubical type,outer shell made out of 3.00 mm thick CRCA Sheet factory fabricated,roof canopy,with front and back openable double door system lockable/openable by keys from both sides having chromium plated 19 mm dia fancy keys,louvers & air vents gasket for natural flow of air. Suitable gasket shall be used to make the outer shell completely vermin proof. The Panel mounting base frame is made of M.S angle iron of size 50x50x5 mm and legs are grouted on PCC foundation above 50 cm from PCC foundation.The bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands.The inner shell be made out of 2.0 mm thick CRCA sheet duly compartmentalised for each control gear with louvers and air vent gasket for natural flow of air and suitable provision to accomodate incomer/outgoing MCCB's/MCBs and metering devices and suitable bus bar chamber for passing and connecting UG cables.Providing bus bar for phases and neutral and shall be insulated with colour code heat shrinkable sleeves and shall be mounted on suitable size'F' class insulators made on non hygroscopic,non combustile track resistant,high strength FRP/SMC/DMC material at an interval of not more than 300 through out the length of the TPN bus bar including dismantling and removing the old US LT Panel all as specified and directed by the Engr-in-Charge. The Panel consists of Aluminium bus bar TPN 500 Amp of suitable length and section covered with coloured heat shrinkable anti track insulation tape of finished thickness not more than 1 mm and fixed on epoxy base post insulator of both dia and height - 01 set with following specifications:- Incoming (a) MCCB 320 Amp FP 35 KA - 01 No (Incoming) (a) MCCB 160 Amps FP 25 KA - 01 ( Outgoing) (b) MCCB 125 Amp FP 25 KA - 03 Nos ( outgoing) (b) RYB indications ( LED Type) - 1 Set (C) CT's- 320/5A,CL-1,15 VA - 01 Set (f) Multifunctional meter digital compatible to measure voltagecurrent,PF,frequency with 3 lines display LCD in 96x96 sqmm flush mounted case,accuracy class 1.0 - 01 No (g) Danger notice plate riveted in the outer body 440 volt. Loc: Naval Aircraft Yard Panels near Perimeter Road

Supply,Install,testing and commissioning in replacement of LT Panel outdoor type ,powder coated dust and vermin and weather proof outdoor,CPRI approved,cubical type,outer shell made out of 3.00 mm thick CRCA Sheet factory fabricated,roof canopy,with front and back openable double door system lockable/openable by keys from both sides having chromium plated 19 mm dia fancy keys,louvers & air vents gasket for natural flow of air. Suitable gasket shall be used to make the outer shell completely vermin proof. The bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands.The inner shell be made out of 2.0 mm thick CRCA sheet duly compartmentalised for each control gear with louvers and air vent gasket for natural flow of air and suitable provision to accomodate incomer/outgoing MCCB's/MCBs and metering devices and suitable bus bar chamber for passing and connecting UG cables. Panel mounting base frame is made of M.S. angle iron of size 50x50x5 mm and legs grouted on PCC foundation above 50 cm from the PCC foundation. Bus bars for phases and neutral shall be insulated with colour code heat shrinkable sleeves and shall be mounted on suitable size'F' class insulators made on non hygroscopic,non combustile track resistant,high strength FRP/SMC/DMC material at an interval of not more than 300 through out the length of the TPN bus bar including dismantling and removing the old US LT Panel all as specified and directed by the Engr-in-Charge. The panel consists of Aluminium bus bar TPN 600 Amp of suitable length and section covered with coloured heat shrinkable anti track insulation tape of finished thickness not more than 1 mm and fixed on epoxy base post insulator of both dia and height not less than 40 mm - 01 set with following specifications:- (a) MCCB 400 Amp FP 35 KA - 01 No (Incoming) (b) MCCB 250 Amps FP 35 KA - 01 ( Outgoing) (C) MCCB 125 Amp FP 25 KA - 02 Nos ( outgoing) (d) RYB indications ( LED Type) - 1 Set (e) CT's- 400/5A,CL-1,15 VA - 01 Set (f) Multifunctional meter digital compatible to measure voltagecurrent,PF,frequency with 3 lines display LCD in 96x96 sqmm flush mounted case,accuracy class 1.0 - 01 No (g) Danger notice plate riveted in the outer body 440 volt. Loc: Infront of Command Stadium & Near Swimming Pool

Supply,Install,testing and commissioning in replacement of LT Panel outdoor type,CPRI approved ,powder coated dust , vermin and weather proof outdoor,cubical type,outer shell made out of 3.00 mm thick CRCA Sheet factory fabricated,roof canopy,with front and back openable double door system lockable/openable by keys from both sides having chromium plated 19 mm dia fancy keys,louvers & air vents gasket for natural flow of air. Suitable gasket shall be used to make the outer shell completely vermin proof. The Panel mounting base frame is made of M.S. angle iron of size 50x50x5 mm and legs grouted on PCC foundation above 50 cm from the PCC foundation.The bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands.The inner shell be made out of 2.0 mm thick CRCA sheet duly compartmentalised for each control gear with louvers and air vent gasket for natural flow of air and suitable provision to accomodate incomer/outgoing MCCB's/MCBs and metering devices and suitable bus bar chamber for passing and connecting UG cables.Providing bus bar for phases and neutral and shall be insulated with colour code heat shrinkable sleeves and shall be mounted on suitable size'F' class insulators made on non hygroscopic,non combustile track resistant,high strength FRP/SMC/DMC material at an interval of noy more than 300 through out the length of the TPN bus bar including dismantling and removing the old US LT Panel all as specified and directed by the Engr-in-Charge. Aluminium bus bar TPN 600 Amp of suitable length and section covered with coloured heat shrinkable anti track insulation tape of finished thickness not more than 1 mm and fixed on epoxy base post insulator of both dia and height not less than 40 mm - 01 set with following specifications:- (a) MCCB 400 Amp FP 35 KA - 01 No (Incoming) (b) MCCB 250 Amps FP 35 KA - 01 ( Outgoing) (c) MCCB 125 Amp FP 25 KA - 03 Nos ( outgoing) (d) RYB indications ( LED Type) - 1 Set (e) CT's- 400/5A,CL-1,15 VA - 01 Set (f) Multifunctional meter digital compatible to measure voltagecurrent,PF,frequency with 3 lines display LCD in 96x96 sqmm flush mounted case,accuracy class 1.0 - 01 No (g) Danger notice plate riveted in the outer body 440 volt. Loc:LT Panel Dumping Yard & NCS

Supply ,Install,testing and commissioning in replacement of outdoor pedestal type LT Panel CPRI approved suitable for 415 volts, 3 phase 4 wire 50 Hz AC supply system conforming to IS:8623/93,pedestral mounted factory made,weather and vermin proof ,fully ventilated and fabricated out of angle iron 40mmx40mmx6mm thick frame work and CRCA sheet 3 mm thick having Aluminium bus bar of rating 300 Amps,three phase and one neutral fixed on insulator and bus bar insulated by coloured heat shrinkable sleeves. The size of the panel as per recommendation of original manufacturer,mounted on angle iron stand made out of size 40mm x40mm 6mm grouted 50 cm above the foundation and consisting of digital multifunctional meter with CTs including dismantling and removing the old existing panel complete all as specified and directed by ths following specifications:- (a) Bus Bar chamber of 3 phase and 1 neutral 4 strip 415 volts with 300 Amps aluminium strip - 01 set (b) MCCB 160 Amps 35 kA 4 Pole - 01 No (Incoming) (C) MCCB 63 Amps 25 kA 4 pole - 02 Nos ( Outgoing) (d) MCCB 40 Amps 25 kA 4 pole - 01 (e) Digital multifunctional meter -01 no (f) RYB indications ( LED Type) - 1 Set (g) Danger notice plate riveted in the outer body 440 volt Loc:- Sailors Married Accdn near Qtr No 184 and infront of NCS

Supply ,Install,testing and commissioning in replacement of outdoor pedestal type LT Panel CPRI approved suitable for 415 volts, 3 phase 4 wire 50 Hz AC supply system conforming to IS:8623/93,floor mounted factory made,weather and vermin proof ,fully ventilated and fabricated out of angle iron 40mmx40mmx6mm thick frame work and CRCA sheet 3 mm thick having Aluminium bus bar of rating 400 Amps,three phase and one neutral fixed on insulator and bus bar insulated by coloured heat shrinkable sleeves. The size of the panel as per recommendation of original manufacturer,mounted on angle iron stand made out of size 40mm x40mm 6mm grouted of digital voltmeter & Amps meter with CTs including dismantling and removing the old existing panel complete all as specified and directed by ths following specifications:- (a) Bus Bar chamber of 3 phase and 1 neutral 4 strip 415 volts with 400 Amps aluminium strip - 01 set (b) MCCB 250 Amps 35 kA 4 Pole - 01 No (Incoming) (C) MCCB 100 Amps 25 kA 4 pole - 01 no (Outgoing) (d) MCCB 63 Amps 25 kA 4 pole - 04 Nos ( Outgoing) (e) Digital multifunctional meter - 01 No (f) RYB indications ( LED Type) - 1 Set (g) Danger notice plate riveted in the outer body 440 volt Loc:- KB Offrs Qtrs & NAY LT Panel Near sub stn

Supply,Install,testing and commissioning in replacement of LT Panel outdoor type,CPRI approved , powder coated dust , vermin and weather proof outdoor,cubical type,outer shell made out of 3.00 mm thick CRCA Sheet factory fabricated,roof canopy,with front and back openable double door system lockable/openable by keys from both sides having chromium plated 19 mm dia fancy keys,louvers & air vents gasket for natural flow of air. Suitable gasket shall be used to make the outer shell completely vermin proof. The Panel mounting base frame is made of M.S. angle iron of size 50x50x5 mm and legs grouted on PCC foundation above 50 cm from PCC foundation.The bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands.The inner shell be made out of 2.0 mm thick CRCA sheet duly compartmentalised for each control gear with louvers and air vent gasket for natural flow of air and suitable provision to accomodate incomer/outgoing MCCB's/MCBs and metering devices and suitable bus bar chamber for passing and connecting UG cables.Providing bus bar for phases and neutral and shall be insulated with colour code heat shrinkable sleeves and shall be mounted on suitable size'F' class insulators made on non hygroscopic,non combustile track resistant,high strength FRP/SMC/DMC material at an interval of not more than 300 through out the length of the TPN bus bar including dismantling and removing the old US LT Panel all as specified and directed by the Engr-in-Charge. Aluminium bus bar TPN 600 Amp of suitable length and section covered with coloured heat shrinkable anti track insulation tape of finished thickness not more than 1 mm and fixed on epoxy base post insulator of both dia and height - 01 set with following specifications:- (a) MCCB 400 Amp FP 50 KA - 01 No (Incoming) (b) MCCB 200 Amps FP 35 KA - 02 ( Outgoing) (c) MCCB 100 Amp FP 25 KA - 02 Nos ( outgoing) (d) RYB indications ( LED Type) - 1 Set (e) CT's- 400/5A,CL-1,15 VA - 01 Set (f) Multifunctional meter digital compatible to measure voltage current,PF,frequency with 3 lines display LCD in 96x96 sqmm flush mounted case,accuracy class 1.0 - 01 No (g) Danger notice plate riveted in the outer body 440 volt. Loc:MOK Main Panel

Supply,Install,testing and commissioning in replacement of LT Panel outdoor type,CPRI approved ,powder coated dust , vermin and weather proof outdoor,cubical type,outer shell made out of 3.00 mm thick CRCA Sheet factory fabricated,roof canopy,with front and back openable double door system lockable/openable by keys from both sides having chromium plated 19 mm dia fancy keys,louvers & air vents gasket for natural flow of air. Suitable gasket shall be used to make the outer shell completely vermin proof. The Panel mounting base frame is made of M.S angle iron of size 50x50x5 mm and legs are grouted on PCC foundation above 50 cm from PCC foundation.The bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands.The inner shell be made out of 2.0 mm thick CRCA sheet duly compartmentalised for each control gear with louvers and air vent gasket for natural flow of air and suitable provision to accomodate incomer/outgoing MCCB's/MCBs and metering devices and suitable bus bar chamber for passing and connecting UG cables.Providing bus bar for phases and neutral and shall be insulated with colour code heat shrinkable sleeves and shall be mounted on suitable size'F' class insulators made on non hygroscopic,non combustile track resistant,high strength FRP/SMC/DMC material at an interval of noy more than 300 through out the length of the TPN bus bar including dismantling and removing the old US LT Panel all as specified and directed by the Engr-in-Charge. The Panel consists of Aluminium bus bar TPN 600 Amp of suitable length and section covered with coloured heat shrinkable anti track insulation tape of finished thickness not more than 1 mm and fixed on epoxy base post insulator - 01 set with following specifications:- (a) MCCB 400 Amp FP 50 KA - 01 No (Incoming) (b) MCCB 200 Amps FP 25 KA - 02 ( Outgoing) (c) MCCB 125 Amp FP 25 KA - 02 Nos ( outgoing) (d) RYB indications ( LED Type) - 1 Set (e) CT's- 400/5A,CL-1,15 VA - 01 Set (f) Multifunctional meter digital compatible to measure voltage current,PF, frequency with 3 lines display LCD in 96x96 sqmm flush mounted case,accuracy class 1.0 - 01 No (g) Timer switches with contactor TP 40 Amp for street light fittings (h) Danger notice plate riveted in the outer body 440 volt. Loc:LT Panel for Depo Main (Samigri Bhavan)

Supply ,Install,testing and commissioning in replacement of outdoor pedestal type LT Panel CPRI approved suitable for 415 volts, 3 phase 4 wire 50 Hz AC supply system conforming to IS:8623/93,pedestral mounted factory made,weather and vermin proof , fully ventilated and fabricated out of angle iron 40mmx40mmx6mm thick frame work and CRCA sheet 3.15 mm thick having Aluminium bus bar of rating 400 Amps, three phase and one neutral fixed on insulator and bus bar insulated by coloured heat shrinkable sleeves. The size of the panel as per recommendation of original manufacturer,mounted on angle iron stand made out of size 40mm x40mm 6mm grouted of digital voltmeter & Amps meter with CTs including dismantling and removing the old existing panel complete all as specified and directed with the following specifications:- (a) Bus Bar chamber of 3 phase and 1 neutral 4 strip 415 volts with 400 Amps aluminium strip - 01 set (b) MCCB 250 Amps 35 kA 4 Pole - 01 No (Incoming) (C) MCCB 200 Amps 25 kA 4 pole - 01 No (Outgoing) (e) MCCB 63 Amps 25 kA 4 pole - 03 Nos (Outgoing) (e) Digital multifunctional meter - 01 No (f) Indicator lamp Yellow,Red,Blue - 01 Set (g) Danger notice plate riveted in the outer body 440 volt. Loc:- Store House No-05&06 , Store House No - 07&08 (MOK)

Supply ,Install,testing and commissioning in replacement of outdoor pedestal type LT Panel CPRI approved suitable for 415 volts, 3 phase 4 wire 50 Hz AC supply system conforming to IS:8623/93,pedestral mounted factory made,weather and vermin proof ,fully ventilated and fabricated out of angle iron 40mmx40mmx6mm thick frame work and CRCA sheet 3 mm thick having Aluminium bus bar of rating 400 Amps,three phase and one neutral fixed on insulator and bus bar insulated by coloured heat shrinkable sleeves. The size of the panel as per recommendation of original manufacturer,mounted on angle iron stand made out of size 40mm x40mm 6mm grouted of digital voltmeter & Amps meter with CTs including dismantling and removing the old existing panel complete all as specified and directed with the following specifications:- (a) Bus Bar chamber of 3 phase and 1 neutral 4 strip 415 volts with 400 Amps aluminium strip - 01 set (b) MCCB 250 Amps 35 kA 4 Pole - 01 No (Incoming) (C) MCCB 200 Amps 25 kA 4 pole - 01 No (Outgoing) (e) MCCB 63 Amps 25 kA 4 pole - 02 Nos (Outgoing) (e) Digital multifunctional meter - 01 No (f) Indicator lamp Yellow,Red,Blue - 01 Set (g) Danger notice plate riveted in the outer body 440 volt. Loc:- Store House No-09 (MOK)

Supply,Install,testing and commissioning in replacement of LT Panel outdoor type ,CPRI approved ,powder coated dust and vermin and weather proof outdoor,cubical type,outer shell made out of 3.00 mm thick CRCA Sheet factory fabricated,roof canopy,with front and back openable double door system lockable/openable by keys from both sides having chromium plated 19 mm dia fancy keys,louvers & air vents gasket for natural flow of air. Suitable gasket shall be used to make the outer shell completely vermin proof. The Panel mounting base frame is made of M.S. angle iron of size 50x50x5 mm and legs grouted on PCC foundation above 50 cm from PCC foundation. The bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands.The inner shell be made out of 2.0 mm thick CRCA sheet duly compartmentalised for each control gear with louvers and air vent gasket for natural flow of air and suitable provision to accomodate incomer/outgoing MCCB's/MCBs and metering devices and suitable bus bar chamber for passing and connecting UG cables.Providing bus bar for phases and neutral and shall be insulated with colour code heat shrinkable sleeves and shall be mounted on suitable size'F' class insulators made on non hygroscopic,non combustile track resistant,high strength FRP/SMC/DMC material at an interval of not more than 300 through out the length of the TPN bus bar including dismantling and removing the old US LT Panel all as specified and directed by the Engr-in-Charge. Aluminium bus bar TPN 500 Amp of suitable length and section covered with coloured heat shrinkable anti track insulation tape of finished thickness not more than 1 mm and fixed on epoxy base post insulator of both dia and height - 01 set with following specifications:- Incoming (a) MCCB 320 Amp FP 36 KA - 01 No (Incoming) (b) MCCB 200 Amps FP 25 KA - 02( Outgoing) (c) MCCB 125 Amp FP 35 KA - 02 Nos ( outgoing) (d) RYB indications ( LED Type) - 1 Set (e) CT's- 320/5A,CL-1,15 VA - 01 Set (f) Multifunctional meter digital compatible to measure voltagecurrent,PF,frequency with 3 lines display LCD in 96x96 sqmm flush mounted case,accuracy class 1.0 - 01 No (g) Danger notice plate riveted in the outer body 440 volt. Loc: LT Panel near Ship Gally (INS Garuda)

Supply ,Install,testing and commissioning in replacement of outdoor pedestal type CPRI approved LT Panel suitable for 415 volts, 3 phase 4 wire 50 Hz AC supply system conforming to IS:8623/93,pedestral mounted factory made,weather and vermin proof ,fully ventilated and fabricated out of angle iron 40mmx40mmx6mm thick frame work and CRCA sheet 3 mm thick having Aluminium bus bar of rating 300 Amps,three phase and one neutral fixed on insulator and bus bar insulated by coloured heat shrinkable sleeves. The size of the panel as per recommendation of original manufacturer,mounted on angle iron stand made out of size 40mm x40mm 6mm grouted on 50 cm above the PCC foundation and consisting of digital voltmeter & Amps meter with CTs including dismantling and removing the old existing panel complete all as specified and directed with the following specifications:- (a) Bus Bar chamber of 3 phase and 1 neutral 4 strip 415 volts with 300 Amps aluminium strip - 01 set (b) MCCB 200 Amps 36 kA 4 Pole - 01 No (Incoming) (C) MCCB 63 Amps 25 kA 4 pole - 04 Nos ( Outgoing) (d) MCCB 40 Amps 25 kA 4 pole - 02 Nos ( Outgoing) (e)Digital multifunctional meter -01 no (f) RYB indications ( LED Type) - 1 Set (g) Danger notice plate riveted in the outer body 440 volt. Loc:- Venduruthy Armoury Block

Supply ,Install,testing and commissioning in replacement of outdoor pedestal type CPRI approved, LT Panel suitable for 415 volts, 3 phase 4 wire 50 Hz AC supply system conforming to IS:8623/93,pedestral mounted factory made,weather and vermin proof ,fully ventilated and fabricated out of angle iron 40mmx40mmx6mm thick frame work and CRCA sheet 3 mm thick having Aluminium bus bar of rating 400 Amps all as specified,three phase and one neutral fixed on insulator and bus bar insulated by coloured heat shrinkable sleeves. The size of the panel as per recommendation of original manufacturer,mounted on angle iron stand made out of size 40mm x40mm 6mm grouted of digital voltmeter & Amps meter with CTs including dismantling and removing the old existing panel complete all as specified and directed with the following specifications:- (a) Bus Bar chamber of 3 phase and 1 neutral 4 strip 415 volts with 400 Amps aluminium strip - 01 set (b) MCCB 250 Amps 35 kA 4 Pole - 01 No (Incoming) (c) MCCB 200 Amps 25 kA 4 pole - 01 No (Outgoing) (d) MCCB 63 Amps 25 kA 4 pole - 02 Nos (Outgoing) (e) Digital multifunctional meter - 01 No (f) RYB indications ( LED Type) - 1 Set (g) Danger notice plate riveted in the outer body 440 volt. Loc:- Store House No-10 & 21 (MOK)

Supply,install,testing and commissioning in replacement Timer Panel,outdoor type,powder coated,dust and vermin and weather proof outdoor type,cubical type,outer shell made out of 3 mm thick CRCA Sheet & MS angle iron section of 50x50x6 mm frame factory fabricated,roof canopy,with front and back openable double door system lockable/openable by keys from both sides and with TPN MCB-63 Amps as incomer with suitable auxilliary contactor of 65 A, AC 3 rating 3 ph ,digital timer switch,auxillary change over switch 6 A,On/Off indicating lamp and all necessary wiring with suitable copper flexible wire complete all as specified and directed by Engr-in-Charge. Loc:- NEPTA(K) , DUMPING YARD ,KB area & NAY Perimeter Lighting

Supply and fix in replacement ON load Change over switch 415 V in sheet metal enclosure 4 pole of capacity 400 Amps

Phejays Agencies (BID ID -3394859)

M/s.Rejoy Constructions (BID ID -3403947)

SRI LAKSHMI ASSOCIATES (BID ID -3410454)

IMPERIAL ENGINEERING COMPANY (BID ID -3392545)

Shree Ayyappa Engineering (BID ID -3393900)

Powertech Engineers (BID ID -3403593)

Neptune Engineers and Builders (BID ID -3411529)